Hotpoint Repair Jobs and Surveys

"REPLACED BOTH THE PRESSURE SWITCH AND THE DRAIN PUMP, ALSO REPAIRED FRAYED POWER CORD."

"Found drain covered in debris, advise cx to use jet dry on every load. This dishwasher does not have a drying fan. Rinse aid is necessary to dry dishes."

Checked the unit MN SN POP Customer signed disclaimer.Turned the unit on and found the belt was off.Removed the top panel and front door panel Reattached the belt and drum.Reassembled the unit.Tested 0

Replace faulty door seal. Test op. All okay.

Installed new burnner wires and burner head then turn both burners on for proper operation and unit tested good

Checked the unit MN SN POP Customer signed the disclaimer.Removed the freezer panel and unbolted the evap Pulled out loose and unhooked the defrost heater. Reattached it and reassembled the unit Pulled out out and removed the control box unhooked and removed the defrost timer. Installed the new one and hooked up the wires. Tested the defrost it stopped the fan and heats up watched it turn off on temp. And unit tested good.Please fill out a technician survey.Thank you

Installed ordered parts tested ops all ckok

"Thermostat switch separated and not working, oven heating light on all the time with no heat. Replaced thermostat and tested."

"Technician verified MN SN POPTechnician removed failed, and installed replacement defrost heater in freezer cabinet. Tech verified unit is cooling properly and operating within manufacturer specifications. Thank you for allowing us to service your freezer today, please take a moment to let us know how we've done by completing our technician satisfaction survey. Call us anytime with questions or any of your appliance needs and have a wonderful day."

"Technician verified MN SN POPTechnician removed failed, and installed replacement defrost heater in freezer cabinet. Tech verified unit is cooling properly and operating within manufacturer specifications. Thank you for allowing us to service your freezer today, please take a moment to let us know how we've done by completing our technician satisfaction survey. Call us anytime with questions or any of your appliance needs and have a wonderful day."

"Technician verified MN SN POPTechnician removed failed, and installed replacement defrost heater in freezer cabinet. Tech verified unit is cooling properly and operating within manufacturer specifications. Thank you for allowing us to service your freezer today, please take a moment to let us know how we've done by completing our technician satisfaction survey. Call us anytime with questions or any of your appliance needs and have a wonderful day."

Replaced burners and Infiniti switch test it and test it okay

Checked unit MN SN POP Customer signed disclaimer Opened unit and removed top panel.Removed drum and removed the interlock switch.Installed new switch. And reassembled the unit. Customer had the outlet being used so I couldn't test .But the unit tested good electrically.Please fill out a technician survey thank you.

"Drain solenoid melted due to stuck timer, needs timer WD21X33641, solenoid WD21X10268, armature link WD1X1316 Service fee $139.95 pre-paid Labor $199.95MPS $14.50Parts $168.48, $87.74, $83.03 Tax $27.82Total $581.52 Left voicemail for landlord with estimate, did not return call to approve or decline repairs. 30 day estimate"

Checked unit MN/SN POP Customer signed disclaimer.Unplugged the unit Removed motor compartment cover And removed old start components from compressor.Installed new start components onto compressor.Removed capacitor from mount and unhooked wires Installed new capacitor and rewired unit. Reassembled unit and plugged it in. Compressor came on and unit started cooling. Watched unit drop from 65? F to 39? FUnit tested good. Please fill out a technician survey.Thank you.

dryer vent coiled over itself - shorten vent run and tst: PASSaeck external vent * see quick pics - GOODJOB COMPLETE

install thermostat (on site) - test: PASS thernostat immediately fired up FZ evap fan motor - unit will normalize in 8-12 hoursJOB COMPLETECX not available for signature

water bibs not tightened * see quick picstest:PASSJOB COMPLETECX not available for signature

"Installed ordered parts, tested ops all ckok"

customer signed disclamerchecked unit MN/SN unplugged uitopened up control panel found wire on J154B terminal where not seated. unhooed and reinstalled.checked water supply. opened water valve all the way open. plugged unit in and started unit on quick wash unit came on and started filling .watched unit fill all the way and stop water.entered unit into service mode. tested all componets componet all tested good unit opporates as designed.please fill out a technition servey