Installed new machine control recalibrated unit cycle tested all checks good at this time

Install parts ordered by previous tech cycled unit all tested unit all tested fine at this time

Complaint was at the door was falling open and when I uninstalled the unit I found the spring came loose and the outer insulation got wrapped up on the cord and wheel. That in turn popped the spring off I corrected the insulation issue put spring back on and tested and all checks are now okay.

"Replace compressor and filter dryer, pressure tested with 250 psi of dry nitrogen and then vacuum tested for over 10 minutes into a deep vacuum and all checks okay no leaks detected. Recharged with about 2.8 oz of our 600 and tested in h a s s and all tests passed."

"Replaced control board, performed recalibration cycle, tested, all checks okay"