Customer signed disclaimer Checked the unit MN SN POP.Opened the package and checked the contents - good.Unscrewed the mounting screws and pulled the unit out.Removed the side panels and guard clips.Removed the springs. Installed the new springs and attached the cables. Reassembled the unit and reinstalled it in to its place. Leveled the unit. Tested the door now opens without and problems.Tested the unit good.Ran a rinse cycle to check the unit for leaks. No leaks detected.Thank you for letting me do your service work today.And if you appreciate the work I did could I get you to go online and fill out a technician survey as to let others know about the service I provided.

Checked unit MN SN POP Customer signed disclaimer Opened package and checked the contents goodOpened the dishwasher and removed the shelves Installed the new one . Adjusted the fit Tested the unit good.Thank you and please fill out a technician survey.

Checked the unit MN SN POP Customer signed disclaimer.Pulled the unit out Unconnected breaker.. removed the shelves and the control board installed the new board. Romoved the drawers face plate and removed the WMC and the MC boards installed the new boards and restored power to the unit.Tested the bottom unit now flashes and the top does nothing.Called tech service and they said the unit is unrepairable.Case number is ( 15855043 ) GE customer care will call 970-618-2655 to make arrangements for replacements.

Checked the unit MN SN POP Checked the unit temp.It was at 40? pulled evap cover to check evap it looks good.Pulled the back cover checked the compressor it was good.Checked unit for leaks found none.Pulled off the kick guard found that the cardboard bottom condenser guard was folded up completely sealing off the condenser . Moved it and put on a brace. Reassembled the unit and tested. went to get my temp probe came back in and found the freezer wide open. Asked the customer to close it so I can test it. Watched unit drop down to 32? and dropping.Asked the customer to monitor the unit over the weekend .Tested unit good.

Checked the unit MN SN POP Customer signed the disclaimer Checked unit I'mChecked the valve water is onRemoved the water filter and put in the filter bypass.Turned the valve on until the ice maker was full of water.Removed bypass and installed the new water filter.Listened the the filter fill with water.Cycled the ice maker and the water valve came on and filled the unit.Soaked up the overflow and reset the unit.Tested unit good.Please fill out a technician survey Thank you