We serviced a
WHIRLPOOL REFRIGERATOR
Model WRFF3136SZ00
Near Central Point, Oregon 97502
Kyle
Job Details:
06/29/2026
"Replaced broken Water line and inlet valve, test cycled ice maker, no leaks. Unit is operating as intended."
We serviced a
GE WASHER
Model GTWN4250D1WS
Near Colorado Springs, Colorado 80918
Earl
Job Details:
06/29/2026
"Customers complaint at 1 time.The washer was trickling inside , even though it wasn't on , they washed some clothes in whatever was in the solenoid , stopping it from closing , all the way must have washed out because it's not doing it anymore unit is operating properly at this time , customer paid service charge in full authorization code4ACT44"
We serviced a
GE DRYER
Model GFD65ESPV0DS
Near Grand Junction, Colorado 81504
Sean
Job Details:
06/29/2026
Wrong appliance collected info for the drier and took a photo.Customer needs to call and get a dispatch for the drier
We serviced a
WHIRLPOOL RANGE
Model WFG505M0MS0
Near Albuquerque, New Mexico 87106
Jason
Job Details:
06/29/2026
Installed control ran heat cycle unit operation checks ok. spoke to cx about review
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Colorado Springs, Colorado 80905
Carlos
Job Details:
06/29/2026
Installed control board ran calibration and test runs all ok
We serviced a
FRIGIDAIRE REFRIGERATOR
Model LFTR1835VFB
Near Medford, Oregon 97504
Kyle
Job Details:
06/29/2026
"Replaced defrost timer and cold control, tested unit operating as intended. Advised customer give 24 hours to get down to temp."
We serviced a
KITCHENAID REFRIGERATOR
Model KRSF705HPS05
Near Vail, Colorado 81657
Antonio
Job Details:
06/29/2026
Installed filter proper and unit is working properly
We serviced a
MAYTAG WASHER
Model MVW6200KW5
Near Roseburg, Oregon 97470
Chris
Job Details:
06/29/2026
Replaced the latch and lid lock. Tested.
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF606ESS01
Near Roseburg, Oregon 97471
Chris
Job Details:
06/29/2026
Replaced all parts listed. Tested the condenser fan.
We serviced a
SPEED QUEEN DRYER
Model ADEE9RYS177TW01
Near Colorado Springs, Colorado 80920
Earl
Job Details:
06/29/2026
I had to call the customer to get payments authorization codeAtaw43
We serviced a
WHIRLPOOL WASHER
Model WTW6157PB1
Near Roseburg, Oregon 97470
Chris
Job Details:
06/29/2026
The display wasn't responding tested the power to the UI. Reconnected the UI and it started working. I erased the error codes and ran a diagnostic test cycle. It passed. L
We serviced a
MAYTAG WASHER
Model MTW6200RW0
Near Rifle, Colorado 81650
James R
Job Details:
06/29/2026
Printed labels took pics ready to send.
We serviced a
BOSCH REFRIGERATOR
Model B21CT80SNS/02
Near Portland, Oregon 97210
Austin
Job Details:
06/26/2026
6/26/26 BA: CC unit stopped making ice. Tech performed a self test on the ice maker and found no issues. Tech turned ice maker on at the controls and noticed that the water filter was not fully engaged into its holster not allowing water through. Tech removed the water filter and inspected the part. Tech asked the Cx where they had purchased the filter from Amazon. Tech explained that Amazon manufactured these filters too small to engage properly with the filter housing. Tech recommended to get an OEM filter from a local distributor and replace the filter with a new one.
We serviced a
SAMSUNG MICROWAVE
Model ME21DG6300SRAA
Near Colorado Springs, Colorado 80927
Brandon
Job Details:
06/26/2026
Replaced pcb and harness tested operation all checks ok recommend surgery protector
We serviced a
SUB ZERO REFRIGERATOR
Model DEC3050RID
Near Colorado Springs, Colorado 80919
Mathew
Job Details:
06/26/2026
Replace board and wire harness. Lights now working as expected. All okay.
We serviced a
SAMSUNG REFRIGERATOR
Model RF28K9380SG/AA
Near Monument, Colorado 80132
Brandon
Job Details:
06/26/2026
Replaced ice maker and cycled all checks ok
We serviced a
SAMSUNG WASHER/DRYER COM
Model WD53DBA900HZ
Near Colorado Springs, Colorado 80908
Brandon
Job Details:
06/26/2026
Replaced updated nozzle assy and tested operation all checks ok
We serviced a
SAMSUNG REFRIGERATOR
Model RF32CG5B30SRAA
Near Merlin, Oregon 97532
Chris
Job Details:
06/26/2026
"Ran HASS in passed diagnostic test. Found C84 error code. Compressor overload. Called TS. TS said to leave more of a gap from the back wall and to have the customer make a video of the noise 5-10 seconds with the fresh food door open, and the same to the freezer door open.."
We serviced a
FISHERPAYKEL REFRIGERATOR
Model RS3684WRUVE1
Near Bend, Oregon 97701
Levi
Job Details:
06/26/2026
"Replaced ice maker, turn it on at the UI and the customer will let us know if it does not work."
We serviced a
SAMSUNG RANGE
Model NX60A6511SS/AA
Near Sisters, Oregon 97759
Levi
Job Details:
06/26/2026
"Replaced defective bake igniter, tested and all checks okay ; used 1 DG94-01441A (Bake igniter) from stock"
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS04
Near Trinidad, Colorado 81082
David
Job Details:
06/26/2026
"Replaced evap, leak tested, evacuated and charged system. Unit is cooling down."
We serviced a
SUB ZERO REFRIGERATOR
Model DEC3050RID
Near Colorado Springs, Colorado 80919
Ralph
Job Details:
06/26/2026
COMPLETED HELPER CALL
We serviced a
FRIGIDAIRE STACK UNIT
Model FLCE7522AW4
Near Colorado Springs, Colorado 80922
Charles
Job Details:
06/26/2026
Installed drain pump to tub.
We serviced a
SAMSUNG REFRIGERATOR
Model RF70H25HERAA
Near Colorado Springs, Colorado 80906
Mathew
Job Details:
06/26/2026
Found bad connection underneath top cover. Light is working as expected.
We serviced a
WHIRLPOOL WASHER
Model CET9100GQ2
Near Albuquerque, New Mexico 87108
Jason
Job Details:
06/26/2026
Installed valve unit operation checks ok. spoke to cx about review
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ0
Near Albuquerque, New Mexico 87106
Jason
Job Details:
06/26/2026
Checked unit found drain line was kinked in one section causing unit to not drain at times. un-kinked and re-routed drain line ran unit through drain cycle a few times unit operation checks ok. spoke to cx about review
We serviced a
MIELE OVEN
Model DGC7885
Near Colorado Springs, Colorado 80919
Ralph
Job Details:
06/26/2026
"REPLACED PART, NO MIELE TECH SUPPORT TODAY, CUST TO RUN UNIT AND CHECK REPAIR THIS WEEK"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKZ4
Near Colorado Springs, Colorado 80919
Ralph
Job Details:
06/26/2026
INSTALLED PART AND UNIT CHECKED OKAY
We serviced a
AMANA WASHER
Model NTW4519JW2
Near Fruita, Colorado 81521
Clint
Job Details:
06/26/2026
"Customer signed disclaimer and recieved parts ordered ,installed new control and unjt advanced and worked properly. PLEASE TAKE TECH SURVEY THANKS.CLINT"
We serviced a
GE DISHWASHER
Model GDF511PGR6BB
Near Grand Junction, Colorado 81504
Sean
Job Details:
06/26/2026
Verified information & customer signed disclaimer.Checked the unit pulled it out and replaced the lock and striker . Put the unit back in and leveled it .Mounted it in place and started it on a normal cycle.The unit started and is running .Tested the unit good.Thank you.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRQC7836RZ
Near Portland, Oregon 97217
Austin
Job Details:
06/26/2026
6/26/26 BA: Removed and replaced damaged shelf holder in bottom right freezer compartment. No other issues to report at this time. Service is complete.
We serviced a
WHIRLPOOL WASHER
Model MTW6205RW1
Near Pueblo, Colorado 81006
James
Job Details:
06/26/2026
Installed ordered parts tested ops all ckok
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ1
Near Albuquerque, New Mexico 87105
Tye
Job Details:
06/26/2026
Arrived and cx complaint of not draining. Found pump failed. Replacedpump.. Checked dw operation. Unit is functioning now as designed. Informed cx of review.
We serviced a
GE WASHER
Model GTW325ASW0WW
Near Fountain, Colorado 80817
Earl
Job Details:
06/26/2026
Install the drain pump intensity at unit is operating properly at this time
We serviced a
WHIRLPOOL RANGE
Model WGE745C0FS05
Near Fountain, Colorado 80817
Earl
Job Details:
06/26/2026
Install both infinite switches and tested unit is operating properly at this time
We serviced a
WHIRLPOOL MICROWAVE OVEN
Model WML55011HS07
Near Colorado Springs, Colorado 80911
Earl
Job Details:
06/26/2026
Insta.\nLl control board intested at unit is operating properly at this time
We serviced a
AMANA WASHER
Model NTW4516FW4
Near Albuquerque, New Mexico 87106
Jason
Job Details:
06/26/2026
Installed control ran calibration cycle and quick wsh cycle. unit operation checks ok. spoke to cx about review
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Grand Junction, Colorado 81501
James R
Job Details:
06/26/2026
Replaced control and then drive pulley and belt. Run thru a calibration cycle and then a service test is operating as designed. Please fill out tech satisfaction survey. Thank You.
We serviced a
WOLF DOUBLE WALL OVEN
Model DO30PM/S/PM
Near Grand Junction, Colorado 81507
Clint
Job Details:
06/26/2026
Customer signed discalimer and recieved parts ordered ...Removed door and switched out inner glass .put door back on and it shut perfectly. PLEASE TAKE TECH SURVEY.THANKS CLINT
We serviced a
KITCHENAID DISHWASHER
Model KDTM405PPS1
Near Albuquerque, New Mexico 87122
Jason
Job Details:
06/26/2026
Checked unit found wash motor not starting. installed pump motor assy. ran quick cycle unit operation checks ok. spoke to cxanout review
We serviced a
KITCHENAID DISHWASHER
Model KDTS424SPS0
Near Roseburg, Oregon 97470
Chris
Job Details:
06/26/2026
Replaced the dispenser and tested.
We serviced a
WHIRLPOOL RANGE
Model WFG320M0MS0
Near Grand Junction, Colorado 81501
James R
Job Details:
06/26/2026
Signed disclaimer. Replaced control and test operation. Is operating as designed. Please fill out tech satisfaction survey. Thank You.
We serviced a
AMANA WASHER
Model NTW4516FW4
Near Colorado Springs, Colorado 80915
Carlos
Job Details:
06/26/2026
Installed control board ran tests and calibration runs all ok
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKZ3
Near Rio Rancho, New Mexico 87124
Tye
Job Details:
06/26/2026
Arrived and removed failed motor assembly. Installed new motor assembly. Tested dw. No leaks and init us functioning as designed now.
We serviced a
KITCHENAID REFRIGERATOR
Model KRQC736RPS
Near Grand Junction, Colorado 81507
James R
Job Details:
06/26/2026
Signed disclaimer. Checked C.C. area customer thinks heres noise in the area. Removed evap cover and checked evap is clear no frost build up and fan runs smoothly. Put unit into diagnostics test mode. Compressor and cooling went thru and checked all components. All sound fine. Then did fan test F.C. F.F. C.C. and icemaker as well as condenser.checked all sound fine. Did wtr dispenser and icemaker valve test sound fine. Also did a icemaker harvest test hear just the normal noise. At this time hear nothing un-usual. Is operating as designed. Please fill out tech satisfaction survey. Thank You.
We serviced a
GE DRYER
Model GFD55ESSN0WW
Near Peyton, Colorado 80831
Charles
Job Details:
06/26/2026
"Replaced drum belt and idler pulley, customer was sent pulley."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS312SNHW07
Near Albuquerque, New Mexico 87112
Jason
Job Details:
06/26/2026
Checked unit found cabinet to liner gaps. sealed all gaps with silicone. unit operation checks ok. spoke to cx about review
We serviced a
KITCHENAID DISHWASHER
Model KDTM404KPS0
Near Edgewood, New Mexico 87015
Jason
Job Details:
06/26/2026
Installed parts listed ran quick cycle. unit operation checks ok. spoke to cx about review
We serviced a
WHIRLPOOL FREEZER
Model WZF34X20DW06
Near Colorado Springs, Colorado 80922
Aaron
Job Details:
06/26/2026
"Removed and replaced control and thermistors, compressor came on, unit needs time to cool. Advised customer of situation and survey."
We serviced a
WHIRLPOOL WASHER
Model WTW4105SW0
Near Colorado Springs, Colorado 80924
Aaron
Job Details:
06/26/2026
"Drain hose, clamp, and retainer are missing, replaced components and tested unit through diagnostics, working well now, no leaks, installed litmus strip and advised customer of situation and survey."
We serviced a
KITCHENAID DISHWASHER
Model KDTS324SPS0
Near Colorado Springs, Colorado 80927
Aaron
Job Details:
06/26/2026
"Removed and replaced main harness assembly, tested unit through diagnostics, working well now. Advised customer of 5 star survey."
We serviced a
AMANA WASHER
Model NTW4516FW4
Near Colorado Springs, Colorado 80915
Carlos
Job Details:
06/26/2026
Installed control board ran tests and calibration runs all ok
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Fountain, Colorado 80817
Carlos
Job Details:
06/26/2026
Installed control board ran tests and calibration runs all ok
We serviced a
MONOGRAM DISHWASHER
Model ZDT925SINCII
Near Breckenridge, Colorado 80424
Erik
Job Details:
06/26/2026
Install leg fixing kit level unit reinstallJob complete
We serviced a
KITCHENAID DISHWASHER
Model KDTM404EBL3
Near Colorado Springs, Colorado 80923
Torrey
Job Details:
06/26/2026
Removed and replaced control board. Unit works without added the console. Tested on a normal cycle and all good. This was a floor model. Front panel is scratched and dented. Also the kickplate is the wrong part for this model. Doesn't match up. Customer will co tact Whirlpool to see if anything can be done.
We serviced a
BOSCH DISHWASHER
Model SHP65CM5N/24
Near Portland, Oregon 97211
Austin
Job Details:
06/26/2026
6/26/26 BA: removed and replaced faulty door opening module. Put unit into service mode to test the functions of the module without having to run a full cycle. Door now opens by itself and closes properly without issues. Service complete
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5501SG/AA
Near Roseburg, Oregon 97471
Chris
Job Details:
06/26/2026
"Error codes C71 Abnormal high temperature, C31 Icemaker error, C39 Icemaker function error,and and C85 Compressor low voltage error. The evaporator fan motor reads open, the icemaker need replacing. The sealed system may have a leak no frost pattern on the evaporator. Customer doesn't want to repair it."
We serviced a
GENERAL ELECTRIC WASHER
Model GFW550SPR5RS
Near Parachute, Colorado 81635
Sean
Job Details:
06/26/2026
Verified information customer signed disclaimer Removed the control and top panels .Unhooked and removed the controller and installed the new one. Removed the door panel and unhooked the inverter and removed it. Installed the new inverter and reassembled the unit programmed the new controller and tested.The unit started and ran a quick wash.Tested the unit good .Please go online and fill out a technician survey for me.Your technician Sean...
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ14
Near Colorado Springs, Colorado 80918
Torrey
Job Details:
06/26/2026
"There were 2 doors delivered. Both old doors have dents in the top right side of each door. New freezer door box was punctured and the inside panel is cracked. We were only sent for the fridge door anyhow. Owner will figure that confusion of doors out. Removed and replaced refrigerator door. Door drops down significantly from freezer door so if we replace freezer door in the future, shims should be ordered. Owner said to leave the logo off."
We serviced a
MAYTAG WASHER
Model MVWC360AW0
Near Monument, Colorado 80132
Torrey
Job Details:
06/26/2026
Grinding sound during any rotation of basket. Unit is 13 years old and not worth repairing. Cx has a neighbor moving whonsaid he would give her his washer.$179.95 CK Auth# AV9R3X
We serviced a
FRIGIDAIRE REFRIGERATOR
Model LFTR2045VFB
Near Trail, Oregon 97541
Kyle
Job Details:
06/26/2026
"Removed and replaced condenser fan assembly, tested unit. Unit is operating as intended."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT311FZDW02
Near Grand Junction, Colorado 81504
Sean
Job Details:
06/26/2026
Verified the unit information customh by Yyyyyter signed disclaimer.Checked thepulled unit out cleared drain lineand defrost unit.Reassembled the unit and tested good
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Fountain, Colorado 80817
Carlos
Job Details:
06/26/2026
Installed control board ran tests and calibration runs all ok
We serviced a
WHIRLPOOL DRYER
Model WED4720RW0
Near Dillon, Colorado 80435
Antonio
Job Details:
06/26/2026
Installed new element and cuttoff then ran a cycle for proper operation and unit tested good Also advised cx of whlp survey
We serviced a
WHIRLPOOL DISHWASHER
Model WDT73OPAHZO
Near Rio Rancho, New Mexico 87144
Tye
Job Details:
06/26/2026
Arrived and removed failed parts. Installed new parts. Tested rack. It is functioning as designed now. Informed cx of review
We serviced a
SAMSUNG REFRIGERATOR
Model RF28HMEDBSR/AA
Near Colorado Springs, Colorado 80918
Mathew
Job Details:
06/26/2026
"Unit will need icemaker, bin, evap assy to work as expected. Svf $149.95 149.95 CC Auth# 39JWHPMPs $18.50Parts $820.07Evap $338.80Icemaker $189.95Bin $291.32Tax $67.25Labor $209.95$1275.71"
We serviced a
GE WASHER
Model GFW550SSNSWW
Near Grand Junction, Colorado 81504
Sean
Job Details:
06/26/2026
removed the top and door panels removed old control and inverter installed the new control and inverter and reassembled the unit.Tested the unit on quick wash the unit tested good.Verified information customer signed disclaimer .
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Grand Junction, Colorado 81504
Sean
Job Details:
06/26/2026
Verified the unit information customer signed disclaimer Removed the control panel and removed controller from it installed the new controller and reassembled the unit.Calibrated the new controller.Restored power and started the unit on a quick wash.The unit turned on and started running tested unit good.
We serviced a
SAMSUNG RANGE
Model NSE6DG8502SRAA
Near Medford, Oregon 97504
Kyle
Job Details:
06/26/2026
"Found c-f2 error code on display, replaced main control and Ui panel and tested. Unit is operating as intended. Ran HASS and unit passed."
We serviced a
KITCHENAID ICEMAKER
Model KUID508HPS01
Near Colorado Springs, Colorado 80906
Charles
Job Details:
06/26/2026
"Empty ice, ran clean cycle with cleaner. Clean cycle completed. Started unit. Service fee $89.95, Labor $120.95, Total $210.90 paid autho C4WR9R"
We serviced a
JENN-AIR WALL OVEN
Model JOECC730RM00
Near Monument, Colorado 80132
Torrey
Job Details:
06/26/2026
Removed and replaced scratched oven door handle. All went well .
We serviced a
WHIRLPOOL DRYER
Model MED7230HW2
Near Colorado Springs, Colorado 80908
Torrey
Job Details:
06/26/2026
Removed and replaced main control. Tested good.
We serviced a
KITCHENAID ICEMAKER
Model KUID508HPS01
Near Colorado Springs, Colorado 80906
Charles
Job Details:
06/26/2026
"Empty ice, ran clean cycle with cleaner. Clean cycle completed. Started unit. Service fee $149.95, Labor $120.95, Total $270.90 paid autho C4WR9R"
We serviced a
SAMSUNG REFRIGERATOR
Model RF25C5551SR/AA
Near Colorado Springs, Colorado 80923
Mathew
Job Details:
06/26/2026
Replace case filter. All okay. Recommend Cx change water supply line behind fridge.
We serviced a
MAYTAG FREEZER UPRIGHT
Model WZF34X16DW00
Near Colorado Springs, Colorado 80921
Torrey
Job Details:
06/26/2026
21.5k ohms on thermistor whis is about what the readins are at 25 degrees. Wire in line fuse for heater is good. Heater tests at 36.5 ohms. Evaporator fan works. Needs control board.W11382529Control boardGave total estimate of $643.55 total was declined. She will purchase a new freezer.$149.95 CK Auth# PMME93
We serviced a
LG WASHER
Model WT6105CW
Near Colorado Springs, Colorado 80910
Earl
Job Details:
06/26/2026
"Install , the drain pump in tested unit is operating properly at this time"
We serviced a
WHIRLPOOL STACK UNIT
Model WETLV27HW3
Near Colorado Springs, Colorado 80916
Earl
Job Details:
06/26/2026
I Tri.\nEd calling several times and no one answered.I arrived at the property and went to the office and found that they'd already replaced the unit.No need for the harness or the control board which I returned to the office
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ08
Near Colorado Springs, Colorado 80922
Torrey
Job Details:
06/26/2026
Removed and replaced the control board. Cycle tested the icemaker. Tested good.
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Fountain, Colorado 80817
Carlos
Job Details:
06/26/2026
Installed control board ran tests and calibration runs all ok
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Fountain, Colorado 80817
Carlos
Job Details:
06/26/2026
Installed control board ran tests and calibration runs all ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHZ04
Near Colorado Springs, Colorado 80915
Carlos
Job Details:
06/26/2026
Installed listed parts ran tests runs all ok
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ0
Near Fruita, Colorado 81521
James R
Job Details:
06/26/2026
Signed disclaimer. Unit was removed when I arrived. Replace mtr pump assy. Then re-installed unit. Test run is operating as designed. Put a leak board under unit and took pic.Tightened door handle. Please fill out tech satisfaction survey. Thank You.
We serviced a
KITCHENAID REFRIGERATOR
Model KRSC536RPS00
Near Silverthorne, Colorado 80498
Antonio
Job Details:
06/26/2026
Installed new coupler and ice shute then tested unit is working properly
We serviced a
FRIGIDAIRE REFRIGERATOR
Model GRFS2853AD
Near Leadville, Colorado 80461
Antonio
Job Details:
06/26/2026
Found freezer drawer bolts loose.. so i it's aligned and then tightened bolts unit us sealing properly
We serviced a
WHIRLPOOL RANGE
Model WFG525S0JS5
Near Leadville, Colorado 80461
Antonio
Job Details:
06/26/2026
Installed new acu and spark module then heated oven to 350 degrees unit tested good Also advised cx of whlp survey
We serviced a
JENN-AIR REFRIGERATOR
Model JBSS42E22L00
Near Ashland, Oregon 97520
Kyle
Job Details:
06/26/2026
"Replaced ice maker assembly and emitter. Test cycled unit, unit test cycled and has water in unit. Advised customer to give 24-48 hours for full bucket of ice."
We serviced a
WHIRLPOOL WASHER
Model WFW560CHW4
Near Colorado Springs, Colorado 80915
Carlos
Job Details:
06/26/2026
"Cx had Spin cycle turned off, unit runs all ok"
We serviced a
MONOGRAM RANGE
Model ZDP486NDT2SS
Near Silverthorne, Colorado 80498
Erik
Job Details:
06/26/2026
High altitude orifice misplaced install orifice test: passJob complete
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Shady Cove, Oregon 97539
Kyle
Job Details:
06/26/2026
"Send back board, job completed"
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Rifle, Colorado 81650
James R
Job Details:
06/26/2026
Printed labels took pics ready to send.
We serviced a
SUB ZERO FREEZER
Model DET3050FIR
Near Bend, Oregon 97702
Levi
Job Details:
06/25/2026
Replaced door spring spacer assembly on the bottom of main door. Checks okay. Brand new construction.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ04
Near Bend, Oregon 97701
Levi
Job Details:
06/25/2026
"Found that capillary tube was clogged again so I replaced the filter dryer, pressure tested all joints and everything is checking okay no leaks found at time of service. Did a deep vacuum test and vacuum held for close to 10 minutes. Recharge with r134a and the freezer started cooling I was expected."
We serviced a
SUBZERO REFRIGERATOR
Model CL4850UFDID/O
Near Colorado Springs, Colorado 80918
Ralph
Job Details:
06/25/2026
REPLACED LISTED PARTS AND UNIT CHECKED OKAY
We serviced a
JENN-AIR RANGE
Model JDRP548HM01
Near Carbondale, Colorado 81623
Clint
Job Details:
06/25/2026
Customer signed disclaimer and received parts.installed control board .pulled unit out took the back panel off and replaced the fan motor.removed side and replaced probe. Put panels back on and pushed unit back in. Used skid mat for oven.Ran unit and no issues detected. PLEASE TAKE TECH SURVEY THANKS.CLINT/JAMES
We serviced a
GE WASHER
Model GFW850SPNRS
Near Elbert, Colorado 80106
Earl
Job Details:
06/25/2026
I installed the light and fan and tested unit is operating properly.At this
We serviced a
GE COOKTOP
Model JP3030DJ4BB
Near Colorado Springs, Colorado 80921
Earl
Job Details:
06/25/2026
I REPLACED the burner and switch and tested it unit is operating properly.At this
We serviced a
WHIRLPOOL WALL OVEN
Model WOD52ES4MZ
Near Colorado Springs, Colorado 80906
Carlos
Job Details:
06/25/2026
"Installed listed parts all ran at 350, cooling fan turns on"
We serviced a
FRIGIDAIRE REFRIGERATOR
Model PRDA1922AF0
Near Newport, Oregon 97365
Nathan
Job Details:
06/25/2026
Dead and unresponsive display Replaced Tested Advised of survey
We serviced a
ELECTROLUX STACK UNIT
Model ELTE7300AW2
Near Newport, Oregon 97365
Nathan
Job Details:
06/25/2026
Replaced cracked water valve assembly Tested Advised of survey
We serviced a
GE DRYER
Model GTD48EASW0WB
Near Lincoln City, Oregon 97367
Nathan
Job Details:
06/25/2026
Motor blower wheel coming loose from motor shaft Replaced assemblyTestedAdvised of survey

