Service History 138 - D3 Appliance

We serviced a

GENERAL ELECTRIC M/W OTR

Model JVM3160DF8BB

Near Dillon, CO 80435

Erik

Job Details: 10/31/2023

install door asm/ test: GOODJOB COMPLETE

We serviced a

WOLF WALL OVEN ELECTR

Model SO30-2F/S

Near Colorado Springs, CO 80919

Jerimiah

Job Details: 10/31/2023

"Oven door hold spice cabinet doors in closed position, adjusted oven away from doors, unit check ok"

We serviced a

WHIRLPOOL COOKTOP

Model WCG55US6HS05

Near Santa Fe, NM 87507

Jason

Job Details: 10/31/2023

Installed parts listed and adjusted simmer heights of burners unit checks ok

We serviced a

MAYTAG WASHER

Model MVW5430MW0

Near Santa Fe, NM 87507

Jason

Job Details: 10/31/2023

Installed both controls unit checks ok

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS321SDHZ08

Near Santa Fe, NM 87506

Jason

Job Details: 10/31/2023

installed parts unit opperation checks ok

We serviced a

KITCHENAID REFRIGERATOR

Model KBBR306ESS01

Near Santa Fe, NM 87508

Jason

Job Details: 10/31/2023

installed all of the led modules unit checks ok

We serviced a

MAYTAG WASHER

Model MVW5430MW0

Near Woodland Park, CO 80863

Mathew

Job Details: 10/31/2023

"Replaced valve, test op unit working as expected."

We serviced a

WHIRLPOOL DISHWASHER

Model WDF540PADM3

Near Cripple Creek, CO 80813

Mathew

Job Details: 10/31/2023

"Found bad connection at terminal block. Remastered connection and test op, all okay."

We serviced a

SPEEDQUEEN WASHER

Model AWNE9RSN115TW01

Near Cascade-Chipita Park, CO 80809

Mathew

Job Details: 10/31/2023

Installed all parts. Complete tub assy complete. Test op.

We serviced a

WHIRLPOOL DISHWASHER

Model KDTE204KPS2

Near Vail, CO 81657

Antonio

Job Details: 10/30/2023

Installed water inlet and tub unit tested good

We serviced a

GE REFRIGERATOR/TOP

Model GFE28GYNIFS

Near Rifle, CO 81650

Erik

Job Details: 10/30/2023

replace compressor and r600call GE TAGcase# 11383214

We serviced a

SAMSUNG REFRIGERATOR

Model RF265BEAESR/AA

Near Colorado Springs, CO 80916

Jeremy

Job Details: 10/30/2023

Installed all new parts. Ran HASS. Ice maker is working to the best of my knowledge. Asked CX to complete the survey.

We serviced a

SAMSUNG MICROWAVE

Model ME17R7021ES/AA

Near Colorado Springs, CO 80925

Jeremy

Job Details: 10/30/2023

Contacted Samsung and got REF# 7005792229. I gave ref# to CX. I told CX if Samsung doesnt contact in 72 hour to call with ref#.

We serviced a

GE REFRIGERATOR

Model PFE29PSDCSS

Near Colorado Springs, CO 80925

Roman

Job Details: 10/30/2023

Installed new inverter board. Turned the fridge on and the compressor kicked on and started cooling. Fridge working great. $262.45 CC Auth# 939A9W

We serviced a

WHIRLPOOL WASHER

Model WTW4816FW3

Near Colorado Springs, CO 80906

Roman

Job Details: 10/30/2023

"Adjusted the feet and leveled the washer as best as i could and ran spin mode. Washer seems to not shake as much, Washer working well otherwise."

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF767SDHZ04

Near Colorado Springs, CO 80921

David

Job Details: 10/30/2023

"Replaced ice box fan, while the assembly was out of the refrigerator the sound started. Called tech line again same SR # as before.He said the sound is normal as the evap fan and compressor are optimizing their cooling effency. These sounds are found on page 32 of the owners manual, and describes the different sounds the refrigerator makes now."

We serviced a

KITCHENAID COOKTOP

Model KCGC506JSS00

Near Colorado Springs, CO 80921

Glenn

Job Details: 10/30/2023

LF & RF Burners have trouble igniting.Adjust Burners. All OPS Test:OK

We serviced a

SAMSUNG REFRIGERATOR

Model RF28R7201SR/AA

Near Colorado Springs, CO 80922

Mathew

Job Details: 10/30/2023

"Replaced all parts, test op all okay."

We serviced a

WHIRLPOOL DISHWASHER

Model IUD8555DX0

Near Colorado Springs, CO 80906

Roman

Job Details: 10/30/2023

"Ran the dw and water will not come in to the tub, checked the valve and its only getting 19V to the valve. Ran it in diagnostics and it started to fill spray and ran through the cycles. Seems like a control board issueRecommend replacing the main board Control board #W10866125 $350.24Tax $28.72Parts total $378.96MPs $14.50Labor $209.95Sc $129.95Total cost $733.36Did not collect"

We serviced a

BOSCH DISHWASHER

Model SHP78CM5N/22

Near Colorado Springs, CO 80906

Roman

Job Details: 10/30/2023

Installed new outer door panel and tested the dw. Dw working great.

We serviced a

MIDEA FREEZER

Model 646854684+84

Near Colorado Springs, CO 80918

Kris

Job Details: 10/30/2023

ran test op foiund no power to unit checked wall power strip was turned off. turned on unit temp droped to 35 degrees within minutes cx will monitor unit.

We serviced a

JENN-AIR RANGE HOOD

Model JXW8536HS2

Near Monument, CO 80132

Glenn

Job Details: 10/30/2023

Install New Clips & Light Panel. All OPS Test:OK

We serviced a

THERMADOR WALLOVEN

Model MCES/02

Near Colorado Springs, CO 80919

Jessie

Job Details: 10/30/2023

Installed mw that I brought to the shop. Test op. All ok

We serviced a

GE MICROWAVE

Model JE2160BF01

Near Monument, CO 80132

Kris

Job Details: 10/30/2023

body wb06x10498 62.63 swit wb24x823 155.60wb24x10103 67.16fuse wb27x7 58.94wb24x824 67.16

We serviced a

MAYTAG WASHER

Model MVW7232HW0

Near Colorado Springs, CO 80907

Carlos

Job Details: 10/30/2023

Installed listed parts all ok

We serviced a

SUB ZERO ICEMAKER

Model UC-15IP

Near Colorado Springs, CO 80908

Kris

Job Details: 10/30/2023

installed manifold ran test op all ok unit is working to spec at this time.

We serviced a

MAYTAG DRYER

Model MGD5630HC3

Near Colorado Springs, CO 80908

Aaron

Job Details: 10/30/2023

"Motor is weak and overheating, blower wheel stuck, removed and replaced parts, tested and working well now. Advised customer of 5 star survey."

We serviced a

WHIRLPOOL DISHWASHER

Model WDTA50SAKZ2

Near Colorado Springs, CO 80904

Carlos

Job Details: 10/30/2023

Installed sump assembly and Sensor. Ran test op all ok

We serviced a

GENERAL ELECTRIC RANGE

Model PT7800SH9SS

Near Colorado Springs, CO 80907

David

Job Details: 10/30/2023

Replaced duct assembly Tested and damper is stopping where it should All good

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS321SDHZ08

Near Colorado Springs, CO 80904

Carlos

Job Details: 10/30/2023

"Installed listed parts, ran cycle. Motor rotates and fills with water, cx will observe."

We serviced a

KITCHENAID REFRIGERATOR

Model KRMF706ESS05I

Near Colorado Springs, CO 80905

Carlos

Job Details: 10/30/2023

Installed fill tube heater. Cx will observe. $179.95 CC Auth# 3MN3JW

We serviced a

KITCHENAID DISHWASHER

Model KDTM404KPS1

Near Albuquerque, NM 87120

Larry

Job Details: 10/30/2023

Installed Control and UI listed and tested good - Unit is good to go

We serviced a

WHIRLPOOL WASHER

Model WTW8127LC1

Near Grand Junction, CO 81504

James R

Job Details: 10/30/2023

Was leaking at the fabric softener dispenser water line where attaches next to the soap dispenser. Connected good and tested in service diagnostics of the fabric softener dispenser did several times no leaks. customer signed waivers. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

MAYTAG DRYER

Model MED7230HW1

Near Colorado Springs, CO 80915

Carlos

Job Details: 10/30/2023

"Needs a heating element, cx paid cash 89.95. Cx will not repair"

We serviced a

WHIRLPOOL WASHER

Model WTW8127LW1

Near Colorado Springs, CO 80907

David

Job Details: 10/30/2023

Replaced wash plate and bezelRan factory diagnosticsAll working good

We serviced a

MAYTAG WASHER

Model MVW7230HW0

Near Colorado Springs, CO 80915

Carlos

Job Details: 10/30/2023

Needs a door latch. Cx will not repair Paid 129.95 cash

We serviced a

FRIGIDAIRE REFRIGERATOR

Model FFHS2313LS6

Near Colorado Springs, CO 80918

Jessie

Job Details: 10/30/2023

- unit icemaker is badIcemaker#241798231 $231.50Tax $18.98Sc $129.95Msrp $14.50Labor $179.95Total $574.88No return on parts30 day sc

We serviced a

WHIRLPOOL DISHWASHER

Model WDT730PAHZ0

Near Colorado Springs, CO 80923

Aaron

Job Details: 10/30/2023

"F7e1 error code upon arrival, unit circulation motor is washing well, tested unit through diagnostics, heating element comes on during diagnostics, control is not sensing temperature change when not in diagnostics. Discussed situation with techline. SR7737674658Control w11305308 $271.00Tax $22.22Supplies $14.50Hc $149.95Labor $189.95Total job $647.6230 day estimateNo return on parts Auth"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRT148FZDM04

Near Colorado Springs, CO 80923

Aaron

Job Details: 10/30/2023

"Dent bottom of RC door, removed and replaced door, no scratches or dents, verified by customer. Advised customer of 5 star survey."

We serviced a

BOSCH DISHWASHER

Model SHPM78Z55N/20

Near Colorado Springs, CO 80904

Ralph

Job Details: 10/30/2023

installed part and unit checked okay....labor autho no. F34P9R

We serviced a

SUB ZERO REFRIGERATOR

Model BI 36U

Near Colorado Springs, CO 80903

Ralph

Job Details: 10/30/2023

"frridge drain hole was plugged cleaared and reinstalled drawer and panels, unit checked okay...cust paid total autho no. U9H4KE"

We serviced a

ZEPHYR RANGE HOOD

Model AK7636BS

Near Colorado Springs, CO 80924

Kris

Job Details: 10/30/2023

installed all parts sent ran test op all ok unit is working to spec at this time.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRT112CZJZ00

Near Vail, CO 81657

Antonio

Job Details: 10/30/2023

Flipped door seal unit tested good

We serviced a

GE WASHER

Model GUD27ESSJ0WW

Near Pueblo, CO 81001

James

Job Details: 10/30/2023

installed ordered part tested ops all ckok 149.95 collected in office by aw

We serviced a

MAYTAG WASHER

Model MVWB765FW4

Near Grand Junction, CO 81503

James R

Job Details: 10/30/2023

F2E1 error code. Cleared code. Tilted unit back and checked rotor and slider. Rotor bolt loose and slider is faulty. Replaced slider bolt came with slider. Reassembled unit and test in test 52 calibrated unit ok then test 51 service diagnostice test checked good. Then put into drain and spin unit. operation is good. Customer signed waivers. Customer paid $256.69 by check auth code. VH9XW9; used 1 W10734521 (Slider) from stock

We serviced a

MAYTAG FREEZER

Model MZF34X20DW07

Near Grand Junction, CO 81507

James R

Job Details: 10/30/2023

Found several of the cooling vents inside unit covered. Affecting the cooling. Uncovered so could cool evenly. Checked temperature. is down to 5 degrees and dropping. Adjusted control temp to normal setting. Unit is operating as should. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRT112CZJZ00

Near Vail, CO 81657

Antonio

Job Details: 10/30/2023

Flipped door seal unit tested good

We serviced a

MAYTAG DRYER

Model MED7230HW3

Near Fruita, CO 81521

James R

Job Details: 10/30/2023

"Cut pwr to unit. Then restarted and this worked. Put unit thru service diagnostics key test, led test and display test all seems to be functions after pwr reset. Please fill out whirlpool tech satisfaction survey. Thank You."

We serviced a

WHIRLPOOL DISHWASHER

Model WDF331PAHS1

Near Albuquerque, NM 87114

Larry

Job Details: 10/30/2023

Installed parts listed and tested good - Unit is good to go

We serviced a

WHIRLPOOL RANGE

Model GW399LXUS04

Near Rio Rancho, NM 87124

Larry

Job Details: 10/30/2023

CX complaint - Oven not holding temp - Inspected unit and found the control panel failed - Parts are NLA - Collected SC

We serviced a

WHIRLPOOL WASHER

Model WTW5057LW0

Near Rio Rancho, NM 87124

Larry

Job Details: 10/30/2023

Installed parts listed and tested good - Unit is good to go

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRX735SDHV06

Near Colorado Springs, CO 80927

Aaron

Job Details: 10/30/2023

"RH RC door gasket torn, removed and replaced gasket, working well now. Advised customer of 5 star survey."

We serviced a

WHIRLPOOL DRYER

Model WGD4800BQ1

Near Colorado Springs, CO 80927

Aaron

Job Details: 10/30/2023

"Roller bearings have worn over time, unit is heating well. Needs roller assembly. Roller assembly 349241T $56.25Tax $4.61Supplies $14.50Hc $129.95Labor $199.95Total job $405.2630 day estimateNo return on partsAuth 129.95 hc ck 432 #3UVVF4"

We serviced a

GE RANGE

Model RBS330DR2WW

Near Glenwood Springs, CO 81601

Erik

Job Details: 10/30/2023

temp sensor and mounting clips fell off - hanging in back cavity - resecure mounts and install temp sensor/ test: GOOD *see quick picsBAKE - GOODBROIL - GOODJOB COMPLETE

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF767SDHZ03

Near Colorado Springs, CO 80919

Ralph

Job Details: 10/30/2023

installed parts and cust to monitor

We serviced a

JENN-AIR COOKTOP

Model JGCP436HM00

Near Colorado Springs, CO 80906

Ralph

Job Details: 10/30/2023

INSTALLED PARTS AND UNT CHECKED OKAY

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRT112CZJZ01

Near Vail, CO 81657

Antonio

Job Details: 10/30/2023

Flipped door seal unit tested good

We serviced a

WHIRLPOOL DISHWASHER

Model WDT970SAKZ0

Near Colorado Springs, CO 80922

Mathew

Job Details: 10/30/2023

"Replaced track, Test op, unit working as expected. Left leak strip."

We serviced a

SAMSUNG REFRIGERATOR

Model RF22KREDBSG/AA RFD

Near Colorado Springs, CO 80924

Mathew

Job Details: 10/30/2023

Installed all parts. Test op all okay.

We serviced a

SAMSUNG RANGE

Model NX58J5600SG/AA

Near Colorado Springs, CO 80909

Mathew

Job Details: 10/30/2023

"Found no power getting to bake igniter. Cx was under impression unit was being covered under warranty, unit is out of warranty. Did not hear back about moving forward with repair. Cx paid svf cash 129.95. Svf 129.95MPs 14.50Control DE92-02588J 287.08Labor 209.95"

We serviced a

KITCHENAID REFRIGERATOR

Model KBSD708MSS00

Near Colorado Springs, CO 80906

Jessie

Job Details: 10/30/2023

Replaced bd. Ran forced defrost. Unit has voltage at heater. All ops okCleaned off finger prints off unit

We serviced a

GE REFRIGERATOR/TOP

Model GDE21EYKFRFS

Near Carbondale, CO 81623

Erik

Job Details: 10/30/2023

suggest to CX to replace filter WXFEinstall/test: GOODJOB COMPLETE

We serviced a

MAYTAG DRYER

Model MED4500MW0

Near Albuquerque, NM 87110

Jason

Job Details: 10/30/2023

installed part unit checks ok

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF757SDHZ03

Near Albuquerque, NM 87113

Jason

Job Details: 10/30/2023

installed heater and ice maker. unit checks ok

We serviced a

WHIRLPOOL REFRIGERATOR

Model KRFC302ESS00

Near Albuquerque, NM 87109

Jason

Job Details: 10/30/2023

Installed icex maker unit opperation checks ok

We serviced a

MAYTAG WASHER

Model MVW4505MW1

Near Albuquerque, NM 87112

Jason

Job Details: 10/30/2023

installed part unit checks ok

We serviced a

AMANA WASHER

Model NTW4519JW2

Near Albuquerque, NM 87123

Jason

Job Details: 10/30/2023

Installed suspension rods unit checks ok

We serviced a

MAYTAG WASHER

Model MVWC565FW1

Near Albuquerque, NM 87123

Jason

Job Details: 10/30/2023

installed motor unit checks okAuth code:3LRC4U$195.25

We serviced a

SAMSUNG DISHWASHER

Model DW80R5060US/AA 00

Near Colorado Springs, CO 80920

Jeremy

Job Details: 10/30/2023

Unit not draining. Found that check valve on drain hose not letting drain water through. Cleared check valve and unit is now draining. Not HASS compatiable. Aske CX to complete the survey. No leaks. Place leak detection strip under unit. Asked CX to complete the survey.

We serviced a

SAMSUNG MICROWAVE

Model ME16A4021AS/AA

Near Colorado Springs, CO 80925

Jeremy

Job Details: 10/30/2023

Small dent on top left side of trim (see pic). Installed new trim (see pic). New build and no CX present for signatures.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS321SDHZ08

Near Albuquerque, NM 87120

Larry

Job Details: 10/30/2023

CX complaint - Fridge runn too much - CX INSTRUCT - Inspected unit and found both compartments packed full - Explained to cx proper loading and care - Unit is operating as designed

We serviced a

FISHERPAYKEL DISHWASHER

Model DD24DDFTX7

Near Colorado Springs, CO 80905

Ralph

Job Details: 10/28/2023

"CUST BOUGHT AND INSTALLED HIS OWN PART, UNUT CHECKED OKAY"

We serviced a

GE ICE MACHINE

Model UCC15NJCII

Near Colorado Springs, CO 80906

Ralph

Job Details: 10/28/2023

"the board in the ticket, was never ordered so plz disregard it, trafis refunded what cust paid for the part, i willl pay cost for the parts ive already installed , ge sentcust bin sensor, that i installed...autho no for parts at ost 4PE4UE/.....AUTHO NO FOR LABOR KE3X49"

We serviced a

SUBZERO REFRIGERATOR

Model 590

Near Colorado Springs, CO 80919

Ralph

Job Details: 10/28/2023

"scrwwed fill tube in place, cust to monitor"

We serviced a

ZLINE RANGE

Model RA36

Near Colorado Springs, CO 80919

Ralph

Job Details: 10/28/2023

installed partsthatwere sent tocustomer

We serviced a

SPEEDQUEEN WASHER TOP LOAD

Model Awne9rsn116tw01I

Near Colorado Springs, CO 80924

Mathew

Job Details: 10/27/2023

"Found debris in drain pump. Cleared and test op, unit working as expected."

We serviced a

SAMSUNG REFRIGERATOR

Model RF29A9071SR/AA

Near Colorado Springs, CO 80918

Mathew

Job Details: 10/27/2023

Replaced filter assembly. Test op all okay. Passed hass.

We serviced a

MAYTAG REFRIGERATOR

Model MFT2772HEZ00

Near Peyton, CO 80831

Aaron

Job Details: 10/27/2023

"Ice maker shows E2 error code, unable to find home position, fill test was successful, Needs ice maker assembly. Ice maker w11577195 $170.86 out of stockTax $14.01Supplies $14.50Hc $149.95Labor $229.95Total job $579.2730 day estimateNo return on parts Auth 149.95 hc #F4AWY4"

We serviced a

WHIRLPOOL DISHWASHER

Model WDF330PAHB4

Near Grand Junction, CO 81504

James R

Job Details: 10/27/2023

Replaced dispenser. Test cycle unit in diagnostics operation of unit is normal. customer signed waiver. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

KITCHENAID MICROWAVE

Model KEMC308KSS01

Near Pueblo, CO 81001

David

Job Details: 10/27/2023

Installed both torsion bars Working good

We serviced a

SUBZERO WINE COOLER

Model 427RHAG

Near Colorado Springs, CO 80906

Ralph

Job Details: 10/27/2023

repalced cond fan motor and unit is droppping in temps cust to monitor...autho no. 3LT9XC

We serviced a

WHIRLPOOL DRYER

Model WED8500DC4

Near Peyton, CO 80831

Aaron

Job Details: 10/27/2023

"Idler and rollers have worn over time, unit is heating well, Needs repair kit, approved onsite, cleared lint in unit, removed and replaced components, working well now. Advised customer of 5 star survey. Repair kit 4392067 $75.90Tax $6.22Supplies $14.50Hc $149.95Labor $199.95Total job $446.52Approved onsiteNo return on partsAuth total job $446.52 #H33XU9"

We serviced a

MAYTAG WASHER

Model MHW6630HW0

Near Colorado Springs, CO 80908

Aaron

Job Details: 10/27/2023

"Removed and replaced pump assembly, tested unit, working and draining well now. Total due was previously collected."

We serviced a

WHIRLPOOL DISHWASHER

Model WDT750SAHZ0

Near Grand Junction, CO 81503

James R

Job Details: 10/27/2023

Installed adjuster kit. Reinstalled end caps on upper rails. signed waiver. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

GE REFRIGERATOR

Model GNE25JYKHFFS

Near Colorado Springs, CO 80919

Kris

Job Details: 10/27/2023

tightened door handle adjusted/leveled doors all ok unit is working to spec at this time.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRT112CZJZ00

Near Colorado Springs, CO 80903

Carlos

Job Details: 10/27/2023

Installed evaporator and charged. Frost pattern present before departure

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRT148FZDM04

Near Colorado Springs, CO 80923

Aaron

Job Details: 10/27/2023

"Removed and replaced door var, no dents, verified by customer. Advised customer of 5 star survey."

We serviced a

SAMSUNG REFRIGERATOR

Model RF28R7351SG/AA 00

Near Colorado Springs, CO 80907

Jeremy

Job Details: 10/27/2023

Installed all new parts. Reset ice maker. Ice maker working to the best of my knowledge.

We serviced a

MAYTAG WASHER

Model MVW7230HW0

Near Colorado Springs, CO 80916

Jeremy

Job Details: 10/27/2023

Installed all new parts. Calibrated. Tested with diagnostic cycle. Unit is up and working. Double checked for leaks and placed leak detection strip under unit.

We serviced a

KITCHENAID DISHWASHER

Model KDPM604KPS0

Near Albuquerque, NM 87106

Jason

Job Details: 10/27/2023

installed control unit checks ok

We serviced a

AMANA DRYER

Model NED4655EW1

Near Cañon City, CO 81212

James

Job Details: 10/27/2023

found loose wire rubbing on drum while running. secired and tested. all ops test good.

We serviced a

BOSCH DISHWASHER

Model SHX78CM2N/22

Near Cañon City, CO 81212

James

Job Details: 10/27/2023

installed ordered parts and tested ops all ckok. left litmus.

We serviced a

FRIGIDAIRE DRYER

Model FFRE4120SW2

Near Cañon City, CO 81212

James

Job Details: 10/27/2023

Found loose wire on control board causing power issues secured and tested Ops check okay

We serviced a

WHIRLPOOL WASHER

Model WTW5010LW0

Near Albuquerque, NM 87112

Jason

Job Details: 10/27/2023

Installled parts unit checks ok

We serviced a

KITCHENAID REFRIGERATOR

Model KRFC704FPS05

Near Albuquerque, NM 87111

Jason

Job Details: 10/27/2023

installed both parts unit checks ok

We serviced a

WHIRLPOOL ICEMAKER

Model WUI95X15HZ01

Near Albuquerque, NM 87111

Jason

Job Details: 10/27/2023

installed filter dryer charged unit back up opperation checks ok

We serviced a

WHIRLPOOL RANGE

Model WFE320M0JS3

Near Colorado Springs, CO 80923

Aaron

Job Details: 10/27/2023

"Removed and replaced control and sensor, tested unit and heating well, temperatures are good now. Advised customer of 5 star survey."

We serviced a

AMANA DRYER

Model NED4655EW1

Near Colorado Springs, CO 80923

Aaron

Job Details: 10/27/2023

"Dent of bottom left corner of front panel, removed and replaced panel, no dents or scratches, verified by customer. Advised customer of 5 star survey."

We serviced a

WHIRLPOOL WASHER

Model WTW7120HW0

Near Colorado Springs, CO 80923

Aaron

Job Details: 10/27/2023

"Removed and replaced components, ran unit through DLMS and diagnostic cycles, working well now. Advised customer of 5 star survey."

We serviced a

MAYTAG WASHER

Model MHW5630HC3

Near Pueblo, CO 81007

David

Job Details: 10/27/2023

"Checked washer Water in it, put into drain, and is very slow draining. Took apart and cleaned coin lint trapTested and is working great"