We serviced a
GENERAL ELECTRIC REFRIGERATOR
Model ZISS360DRISS
Near Pueblo, CO 81005
David
Job Details:
08/29/2023
"Checked refrigerator, compressor not running Inverter is getting all the proper voltages.Will need to replace the the Inverter and if that doesn't work then the compressor will need to be replaced. Gave ck prices They are going to think about it. Service fee good for 30 days"
We serviced a
SAMSUNG WASHER
Model WA50R5200AW/US 02
Near Colorado Springs, CO 80918
Jeremy
Job Details:
08/29/2023
Washer unbalanced. CX changed suspension. I believe the suspension CX installed are aftermarket and slightly longer that samsung brand. CX is going to order samsung suspensiuon and install. Service Charge $129.95 Auth:VYUR3H
We serviced a
SAMSUNG RANGE - GAS
Model NA30R5310FS/AA
Near Monument, CO 80132
Brandon
Job Details:
08/29/2023
"Front right burner flame goes out on low setting, Valve needed adjustment, increased gas on low setting so flame stays on tested op all ok"
We serviced a
FRIGIDAIRE WASHER
Model ATF7000FG0
Near Pueblo West, CO 81007
David
Job Details:
08/29/2023
Checked washerDoor lock not sensing door is locked and will not spin Ck thinking about ordering partsService fee good for 30 days
We serviced a
SPEEDQUEEN DRYER
Model DR3000WE
Near Colorado Springs, CO 80921
Jessie
Job Details:
08/29/2023
Unit has a burned out element. Element#964p3 $253.32Tax $20.77Sc$129.95$14.50Labor $189.95Total $608.49No return on parts
We serviced a
SUB ZERO WALL OVEN
Model DO3050PE/S/P
Near Colorado Springs, CO 80908
Kris
Job Details:
08/29/2023
installed cooling fan ran test op all ok unit is working to spec at this time.
We serviced a
GE REFRIGERATOR
Model CYE22TSHQSS
Near Colorado Springs, CO 80906
Ralph
Job Details:
08/29/2023
installed part and unit checkded okay
We serviced a
ELECTROLUX WASHER FRONT LOA
Model 651651651
Near Colorado Springs, CO 80920
Kris
Job Details:
08/29/2023
found wire in pump. installed pump ran test op all ok.
We serviced a
SUB ZERO DISHWASHER
Model DW2450
Near Colorado Springs, CO 80920
Kris
Job Details:
08/29/2023
installed leds and control. ran test op still an issue. called techline found jumper wire not connected. ran test op all ok unit is working to spec at this time.
We serviced a
BOSCH REFRIGERATOR
Model B36FD50SNS/01
Near Pueblo, CO 81001
James
Job Details:
08/29/2023
Installed ordered parts. Ops check ok cust to monitor.
We serviced a
SAMSUNG REFRIGERATOR
Model n/a
Near Pueblo, CO 81001
James
Job Details:
08/29/2023
Installed ordered part Tested operation it's all check OK
We serviced a
KENMORE DISHWASHER
Model 66512783K310
Near Pueblo, CO 81005
James
Job Details:
08/29/2023
broken wheel causing plastic to melt on heating element. replaced with cust supplied supports. all ops test good.
We serviced a
BOSCH FRENCH DOOR REFR
Model B36CL80ENS/08
Near Colorado Springs, CO 80904
Ralph
Job Details:
08/29/2023
installed door and unit chekced okay
We serviced a
MAYTAG WASHER
Model MHN30PRCWW0
Near Pueblo West, CO 81007
James
Job Details:
08/29/2023
found loose wire at door lock causing unit to not run properly. secured and tested all ops test good
We serviced a
MIDEA WASHER
Model MLH52S7AGS
Near Colorado Springs, CO 80927
Jessie
Job Details:
08/29/2023
"Customer has had clothes in unit from before ordering parts. Unit will have a musky smell. Using unit will help.Replaced motor kit. Ran rinse spin, e2 error gone. Runs drain pump for 5 mins and comes up with error e64. Replaced control. Ran unit on quick wash and watched full cycle. All okLeak strip under unit"
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW2
Near Carbondale, CO 81623
James R
Job Details:
08/29/2023
"Replaced inlet water valve. Test in diagnostic operation is good. Tested hot,warm cool and cold all are working. Wash temp switch is working. Please fill out whirlpool tech satisfaction survey. Thank You."
We serviced a
WHIRLPOOL WASHER
Model MHW5630HC3
Near Basalt, CO 81621
James R
Job Details:
08/29/2023
Updated model and serial number. Took pics and purchase information.F0E1load in drum during cleanF5E2 lock failure Cleared error codes. Test run thru diagnostics did fine no codes returned. Put into drain and spin did fine. Put a load of towels. Got wet and put into drain and spin. Operation normal. On normal cycle spin was off. Started cycle and set to hi speed. Will remember setting. Cloths need to be able to balance or unit wont spin out properly. Too small or too large can cause issue. Put into quick wash normal soil. Operation is normal. customer signed waivers.Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
MAYTAG DRYER
Model MED7230HW2
Near Aspen, CO 81611
James R
Job Details:
08/29/2023
Checked pwr to unit 250 vac good. Removed control panel and then connector at control. Reinstalled control panel came on. Evidently a connection issue. If issues persist will need to replace the Ui asy. Customer paid service call $209.00 auth code 3E343V Customer signed waiver. please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
WHIRLPOOL WASHER
Model WTW5010LW0
Near Pueblo West, CO 81007
David
Job Details:
08/29/2023
Checked washer Replaced suspension rodRan a test cycle Ran good
We serviced a
SAMSUNG WASHER
Model WV60M9900AV/A5 02
Near Colorado Springs, CO 80922
Jeremy
Job Details:
08/29/2023
CX complaint is that unit is leaking from bottom right of unit. CX say it seems to leak when unit is draining. Ran rinse cycle to allow leak to surface. Took apart washer to examine. Pulled out drain pump assembly. Seals are good and no cracks. Checked all areas that have to do with water. No signs of leaks. After reassembling the unit I ran full express cycle and tilted unit back and couldnt find and signs of leaking. Possible over sudding. Service Charge $129.95 Auth:JJU4LN
We serviced a
WHIRLPOOL RANGE
Model WFG525S0JS2
Near Monument, CO 80132
Glenn
Job Details:
08/29/2023
Left rear burner not working. Adjust LR Burner Head Assy.All OPS Test:OK
We serviced a
SAMSUNG REFRIGERATOR
Model RF263TEAESR/AA
Near Colorado Springs, CO 80918
Brandon
Job Details:
08/29/2023
"Error 39e, Replaced ice maker and tray, sealed ice room cycled ice maker all checks ok hass not compatible"
We serviced a
WHIRLPOOL WASHER
Model MVWX655DW1
Near Albuquerque, NM 87113
Joseph
Job Details:
08/29/2023
Unit not advancing. Test unit and ran diagnostics. Activation component works on everything as well as test cycle. But on a normal cycle nothing will run at random moments of the cycle. Unit will need a new control. Unit is OW. Customer denied repair due to cost. Customer will just get a new washer. $141.35 CC Auth# 3PAE99Service charge: $129.95Tax $11.4Total: $141.35
We serviced a
WHIRLPOOL WASHER
Model WTW4850HW1
Near Albuquerque, NM 87105
Joseph
Job Details:
08/29/2023
Installed parts listed. Unit tested good. Unit is good to go.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHV08
Near Albuquerque, NM 87105
Larry
Job Details:
08/29/2023
CX complaint - Making a buzzing noiae - Inspected unit and found condenser lines touching making buzzing noise - Adjusted lines and tested good - Unit is good to go
We serviced a
SAMSUNG WASHER
Model WA50T5300AC
Near Colorado Springs, CO 80911
Roman
Job Details:
08/29/2023
Installed main co trip board and tested the washer. Washer went through a full cycle. Washer working great.
We serviced a
WHIRLPOOL WASHER
Model WTW7120HW
Near Colorado Springs, CO 80911
Roman
Job Details:
08/29/2023
Installed new control board and ten the washer. Washer started working and draining. Error came up but was an error off the cpu. Ran it through diagnostics and washer is working great.
We serviced a
SAMSUNG WASHER
Model WF45R6100AW/US
Near Fountain, CO 80817
Brandon
Job Details:
08/29/2023
Front weights broke tub. Replaced parts and tested op all ok. Hass cable broke unable to run hass
We serviced a
GE REFRIGERATOR
Model GFD28GYNDFS
Near Fountain, CO 80817
Roman
Job Details:
08/29/2023
"Installed new capacitor, turned the fridge on and its working great. If we glac? more issues recommend replacing the control board. Control board#WR55X35726"
We serviced a
GE REFRIGERATOR
Model GTE17DTNERWW
Near Snowmass Village, CO 81615
Erik
Job Details:
08/28/2023
install/test: GOODJOB COMPLETE
We serviced a
MONOGRAM REFRIGERATOR
Model ZIC303NPPBII
Near Aspen, CO 81611
Erik
Job Details:
08/28/2023
install/test: GOODJOB COMPLETE
We serviced a
WHIRLPOOL DRYER
Model WED5605MW0
Near Pueblo, CO 81006
James
Job Details:
08/28/2023
installed preordered part tested ops all ckok
We serviced a
KITCHENAID DISHWASHER
Model KDTE204KPS1
Near Colorado Springs, CO 80924
Aaron
Job Details:
08/28/2023
"Removed and replaced console, tested unit through diagnostic cycle, working well now. Unit finished diagnostic cycle and did not continue Advised operating. Advised customer of 5 star survey."
We serviced a
KITCHENAID REFRIGERATOR-SID
Model KRSF705HPS00
Near Pueblo West, CO 81007
James
Job Details:
08/28/2023
installed all ordered parts removed all ice buildup with steamer. tested ops all ckok
We serviced a
WHIRLPOOL RESIDENTIAL REFR
Model WZF34X18DW03
Near Pueblo West, CO 81007
James
Job Details:
08/28/2023
found condenser line out of position causing vibration on drip tray when compressor running. adjusted a d tested ops all ckok
We serviced a
WHIRLPOOL DISHWASHER
Model WDTA50SAKZ1
Near Vail, CO 81657
Antonio
Job Details:
08/28/2023
Installed new acu and ui panel until tested good
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC704FPS05
Near Vail, CO 81657
Antonio
Job Details:
08/28/2023
Installed new door with new icemaker and ui board unit testted good looks good too
We serviced a
SAMSUNG REFRIGERATOR
Model RF28T5001SR/AA 02
Near Pueblo, CO 81003
Jeremy
Job Details:
08/28/2023
Replaced all ordered parts. Evap coil was encased in ice (see pic). I defrosted coil. Ran HASS. Unit now working to the best of knowledge. I asked CX to complete survey.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ08
Near Albuquerque, NM 87120
Larry
Job Details:
08/28/2023
Checked and found condenser lines touching making vibration noise - Adjusteed lines and tested good - Unit is good to go
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ16
Near Los Ranchos de Albuquerque, NM 87107
Larry
Job Details:
08/28/2023
CX complaint - Im not working - Installed Pre-is parts and tested good - Unit is operating as designed
We serviced a
WHIRLPOOL DRYER
Model WED4950HW0
Near Albuquerque, NM 87102
Larry
Job Details:
08/28/2023
CX complaint - Dryer not heating - Inspected unit and found the limer failed - Rpelaced with TS and tested ghood - Unit is good to go; used 1 WPW10185982 (Timer) from stock
We serviced a
WHIRLPOOL DRYER
Model WED5605MW0
Near Albuquerque, NM 87105
Larry
Job Details:
08/28/2023
Ran dryer through a load and found it loose power checked and found the breaker tripped - Unit is drawing about 23amps on high heat - Advised cx to replace old weak breakers - Unit is operating as designed - Called techline to document (SR7737195710)
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ08
Near Los Lunas, NM 87031
Larry
Job Details:
08/28/2023
CX complaint - Humming noise - Inspected unit andd found condenser lines touching causing buzzung noise - Adjusted lines and tested good - Unit is good to go
We serviced a
MAYTAG WASHER
Model MVW7232HW1
Near Colorado Springs, CO 80920
Glenn
Job Details:
08/28/2023
"Install New Control, Harness, Slider & Clutch.Diag Test:OK"
We serviced a
WHIRLPOOL RANGE HOOD
Model WVW53UC6FS3
Near Colorado Springs, CO 80921
Glenn
Job Details:
08/28/2023
"Range Hood Lights not working. Found loose connection in harness / led lights connections.Suggest replace harness and LED Lights if conitnues. Connectors are not very sturdy. Declined estimate. Paid SC fee of 129.95, via check, Autho# 34FCA0"
We serviced a
WHIRLPOOL WASHER
Model WTW8127LC1
Near Colorado Springs, CO 80908
Glenn
Job Details:
08/28/2023
"R&R New Gearcase, Clutch & Slider. All OPS Test:OK, No Leaks."
We serviced a
KITCHENAID WALLOVEN
Model KOCE500ESS11
Near Colorado Springs, CO 80921
Glenn
Job Details:
08/28/2023
"Pull Oven from wall, separate MW from oven. Found motor hanging from unit. broken plastic adapter.Install New Motor w/ Adapter. All OPS Test:OK"
We serviced a
VIKING COOKTOP
Model DGSU160BSS
Near Colorado Springs, CO 80906
Ralph
Job Details:
08/28/2023
"showed cust how to clean ignitors, and showed them what happens if the caps arent put on correctly, which caused the issue cust was experiencing, cust paid total autho no. X3KFH3"
We serviced a
JENNAIR REFRIGERATOR
Model JSC24C8EAM00
Near Colorado Springs, CO 80919
Glenn
Job Details:
08/28/2023
Only slight frost pattern. Suggest sealed system issue. Customer declined futher estimate. Will Buy New Unit. Paid SC Fee $149.95 + Tip $7.50 = $157.45
We serviced a
SAMSUNG DRYER
Model DV45K6500EV/A3 01
Near Colorado Springs, CO 80915
Roman
Job Details:
08/28/2023
"Installed motor, support wheels and idler pulley. Dryer working great.Customer was going to call in to pay."
We serviced a
AMANA REFRIGERATOR
Model ART308FFDW10
Near Socorro, NM 87801
Larry
Job Details:
08/28/2023
Installed gaskets and tested good - Unit is good to go
We serviced a
MAYTAG WASHER
Model MHW6000XG2
Near Pueblo, CO 81001
David
Job Details:
08/28/2023
Replaced boot and boot spring clamp Ran through a cycle. No leaks
We serviced a
SAMSUNG WASHER
Model WA50R5400AV/US
Near Colorado Springs, CO 80921
Brandon
Job Details:
08/28/2023
"Basket wobbling, elliptical, leveled unit and calibrated, smart install passed $406.35 basket$429.12 dameprs x4Labor $229.95Mps $14.50Tax $70.15"
We serviced a
KITCHENAID DISHWASHER
Model KDTE704DPA0
Near Colorado Springs, CO 80904
Brandon
Job Details:
08/28/2023
"Mounting screw fell out, added bigger mounting screws, all checks ok"
We serviced a
WHIRLPOOL DRYER
Model WED95HEXL1
Near Colorado Springs, CO 80919
Glenn
Job Details:
08/28/2023
"Unit currently not making any noises, suggest replace the following parts if problem returns. Idler pulley assy - W10837240 $68.01 , REPAIR KIT - 4392067 $75.90 , Tax $11.80 , MPS $14.50 , Labor $184.95 , Declined Estimate for now. Paid SC fee of $129.95 , Autho# A93J9F"
We serviced a
JENNAIR REFRIGERATOR
Model JF42NXFXDE02
Near Colorado Springs, CO 80904
Carlos
Job Details:
08/28/2023
Installed LED lights all ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT311FZDB02
Near Colorado Springs, CO 80906
Carlos
Job Details:
08/28/2023
"Installed ice maker. Ran harvest cycle, Ice maker fills and turns all ok. CX will observe"
We serviced a
SAMSUNG DISHWASHER
Model DW80R5060US/AA
Near Pueblo West, CO 81007
Jeremy
Job Details:
08/28/2023
Rinse aid dispernsar working correctly. Customer education. Not HASS compatiable. Asked CX to complete the survey.
We serviced a
WHIRLPOOL DRYER
Model WED8000DW3
Near Pueblo, CO 81004
James
Job Details:
08/28/2023
installed ordered parts. tested ops all ops test good no error codes observed
We serviced a
SAMSUNG RESIDENTIAL REFR
Model RF27T5241SR/AA
Near Colorado Springs, CO 80911
Roman
Job Details:
08/28/2023
Installed new ice maker and tested it. Ice maker filling up and working great.
We serviced a
KITCHENAID REFRIGERATOR
Model KBSD608ESS01
Near Avon, CO 81620
Antonio
Job Details:
08/28/2023
Picked up old door
We serviced a
WHIRLPOOL WASHER
Model MVW6230HW2
Near Colorado Springs, CO 80906
Carlos
Job Details:
08/28/2023
"Installed suspension, ran spin cycle all ok"
We serviced a
WHIRLPOOL RANGE
Model WFE550S0HZ1
Near Colorado Springs, CO 80925
Carlos
Job Details:
08/28/2023
Installed Control Board. Ran test op all ok
We serviced a
MAYTAG WASHER
Model MVW7232HW
Near Colorado Springs, CO 80923
Mathew
Job Details:
08/28/2023
"Replaced slider and clutch. Test op, all okay."
We serviced a
MAYTAG DRYER
Model MED6230HW3
Near Colorado Springs, CO 80911
Roman
Job Details:
08/28/2023
"Installed new motor, and tested the dryer. Dryer working great."
We serviced a
SAMSUNG REFRIGERATOR
Model RF29BB8600QLAA
Near Colorado Springs, CO 80924
Mathew
Job Details:
08/28/2023
"Replaced fridge door. Test op, unit working as expected."
We serviced a
SAMSUNG WASHER TOP LOAD
Model WA50M7450AW
Near Colorado Springs, CO 80908
Mathew
Job Details:
08/28/2023
"Suspension seems okay, leveled unit, test op, unit spinning well. Missing cap to agitator. Cx decided not to repair. Paid 129.95 cash. DC97-18610A $76.90 x4 307.60 totalTax $25.22Svf $129.95Consumables $14.50Labor $319.95 797.22 total."
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5241SR/AA 03
Near Pueblo, CO 81003
Kris
Job Details:
08/28/2023
installled all parts sent ran test op all ok unit is working to spec at this time. cx will monitor unit.
We serviced a
AMANA RANGE
Model ACR4303MFS5
Near Colorado Springs, CO 80915
Carlos
Job Details:
08/28/2023
Installed infinite switches x4. Ran test op all heat up ok
We serviced a
GE RANGE
Model JBS86SP5SS
Near Silt, CO 81652
Erik
Job Details:
08/28/2023
install cooktopJOB COMPLETE
We serviced a
BOSCH DISHWASHER
Model SHP865WF5N/11
Near Fountain, CO 80817
Roman
Job Details:
08/28/2023
Ran the dw and it seems to fill and spray. Says it makes a noise once in a while. Recommend replacing the inlet valve. Installed new valve tested and checked for leaks. Dw working great.
We serviced a
GE REFRIGERATOR
Model GSHF6KGZBCBB
Near Colorado Springs, CO 80922
Jessie
Job Details:
08/28/2023
Replaced switch. Socket has power. Bulb can now be replaced. Customer will source
We serviced a
KITCHENAID MICROWAVE
Model KMBS104ESS03
Near Rio Rancho, NM 87124
Joseph
Job Details:
08/28/2023
Installed parts listed. Unit tested good. Unit is good to go.
We serviced a
MAYTAG DRYER
Model MED7230HW3
Near Rio Rancho, NM 87144
Joseph
Job Details:
08/28/2023
Installed parts listed. Unit tested good. Unit is good to go.
We serviced a
KITCHENAID WALLOVEN
Model KOCE500ESS20
Near Bernalillo, NM 87004
Joseph
Job Details:
08/28/2023
Unit not up to temperature. Found that gasket on oven needed adjusting. Adjusted gasket on oven door. Unit tested good. Unit is good to go.
We serviced a
WHIRLPOOL DRYER
Model MED4500MW0
Near Pueblo, CO 81004
Jeremy
Job Details:
08/28/2023
Installed ordered parts. Tested operation. Asked CX to complete the survey.
We serviced a
BOSCH RANGE
Model HDIP056U/06
Near Glenwood Springs, CO 81601
Erik
Job Details:
08/28/2023
"CX says it clicks too much(clicking is from high voltage relay on MCB) R9/R11call BSH techline: relay clicking during pre-heat normal, once pre heat is complete relay clicks when cycling.If fast pre-heat is selected MORE elements are in play and clicking will be more frequent.*this is considered NORMAL function by BSH tech support"
We serviced a
AMANA DISHWASHER
Model ADB1400AGW3
Near Rio Rancho, NM 87124
Joseph
Job Details:
08/28/2023
Installed part listed. Unit tested good. Unit is good to go.
We serviced a
GENERAL ELECTRIC WASHER
Model GFW550SSN2WW
Near Glenwood Springs, CO 81601
Erik
Job Details:
08/28/2023
install part on site/ test: SPIN TEST -PASSJOB COMPLETE
We serviced a
WHIRLPOOL DRYER
Model MED4500MW0
Near Albuquerque, NM 87111
Jason
Job Details:
08/28/2023
checked unit found bad rollers installed rollers unit checks ok; used 2 w10314173 (roller) from stock
We serviced a
KITCHENAID RANGE
Model KSEG950ESS2
Near Basalt, CO 81621
James R
Job Details:
08/28/2023
Replaced main control. Test operation. Normal. Customer paid labor $149.95 auth code 9PJ34MPlease fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRB329DMBM03
Near Snowmass Village, CO 81615
James R
Job Details:
08/28/2023
Unit is in LL1White powder on btm left of frz area and left front leveler. Cleaned it up. it is corrosive. Burns the tongue. checked frz evap area it is not coming from there. Slid unit out and checked drain pan and compressor area look good and not leaking.Refrigerator is not leaking. Water is not hooked up to the frig. So nothing from valve or icemaker. waivers were signed.
We serviced a
WHIRLPOOL REFRIGERATOR
Model JFC2290VEM4
Near Aspen, CO 81611
James R
Job Details:
08/28/2023
Installed service kit per service pointer W10632338E S38253 Part coverage only. Had to remove frz door and drawers to remove and thaw all ice as well. Customer paid service call $209.00 auth code E99X9YCustomer signed waivers.
We serviced a
MAYTAG WASHER
Model MHW5630HC3
Near Carbondale, CO 81623
James R
Job Details:
08/28/2023
Replaced tub drum asy. Reassembled. Installed new elec control has full display. Test run unit in test 12 of diagnostic. Operation good no error codes when done. Spins smooth. Put a towel in unit to create a unbalanced load see what happens. Is shaking but is expected. Can feel the floor shake as well. So is getting movement of the floor stand 2-3 feet away can feel it. Would be much better if floor was solid. This would cut down Called tech line with findings. SR#7737192779 Signed waivers.Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
FRIGIDAIRE DISHWASHER
Model LFID2426TF6A
Near Colorado Springs, CO 80910
Ralph
Job Details:
08/28/2023
installed part and unit checked okay
We serviced a
KITCHENAID DISHWASHER
Model KDPM604KPS0
Near Colorado Springs, CO 80908
Aaron
Job Details:
08/28/2023
"Right door hinge spring came apart from assembly, replaced door hinges and tested unit, working well now and no leaks. Installed litmus strip. Advised customer of 5 star survey."
We serviced a
SAMSUNG REFRIGERATOR
Model RF22KREDBSR/AA
Near Colorado Springs, CO 80909
Brandon
Job Details:
08/28/2023
"Ice maker freezing up, no errors, did inspection via visual support with tech line, advised cx they need to get a Samsung water filter, cleared ice and reset ice maker"
We serviced a
MAYTAG WASHER
Model MTW5870TWO
Near Pueblo, CO 81001
James
Job Details:
08/28/2023
found hinge loose causing no contact with lid switch so unit was not draining/spinning. tightened hinge and tested. all ops test good
We serviced a
WHIRLPOOL WALLOVEN
Model KOCE500ESS11.
Near Pueblo West, CO 81007
Kris
Job Details:
08/28/2023
installed all parts sent ran test op all ok unit is working to spec at this time.
We serviced a
WHIRLPOOL WASHER
Model MVW6200KW2
Near Albuquerque, NM 87121
Joseph
Job Details:
08/28/2023
Installed parts listed. Unit tested good. Unit is good to go.
We serviced a
WHIRLPOOL WASHER
Model WTW8127LC1
Near Edgewood, NM 87015
Jason
Job Details:
08/28/2023
installed parts listed unit checcks ok
We serviced a
SUB ZERO REFRIGERATOR BOT
Model 700TC
Near Colorado Springs, CO 80903
Jessie
Job Details:
08/28/2023
Replaced evap and compressor. Unit held pressure. Charged 6.5 ounces 134a. Monitored unit until unit reached mid 40-s. Customer to monitor the unit
We serviced a
KITCHENAID DISHWASHER
Model KDPE234GPS0
Near Pueblo, CO 81008
James
Job Details:
08/28/2023
installed ordered parts all ops test good
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT112CZJZ00
Near Colorado Springs, CO 80903
Ralph
Job Details:
08/28/2023
installed p
We serviced a
WHIRLPOOL DRYER
Model WED560LHW2
Near Avon, CO 81620
Antonio
Job Details:
08/28/2023
Installed new motor and blower wheel unit tested good
We serviced a
GE REFRIGERATOR
Model GFE28GYNHFS
Near Pueblo, CO 81008
David
Job Details:
08/28/2023
"Checked refrigerator Water line from main valve to filter restricted, cleared restriction.Water flowing normally for the house pressure."
We serviced a
SUBZERO FREEZER
Model 201FD
Near Colorado Springs, CO 80906
Ralph
Job Details:
08/26/2023
installed part and unit chercked okay
We serviced a
SUBZERO REFRIGERATOR
Model 532
Near Colorado Springs, CO 80904
Ralph
Job Details:
08/26/2023
instlled listed parts and unit checked okay
We serviced a
SUBZERO REFRIGERATOR
Model 700TR3
Near Colorado Springs, CO 80906
Ralph
Job Details:
08/26/2023
installed parts and unti checkedokay
We serviced a
SUBZERO REFRIGERATOR
Model 532
Near Colorado Springs, CO 80904
Ralph
Job Details:
08/26/2023
"installed parts annd unit checked okay, we replaced the unitscompressor and the evap flsued the heat exchanger and once done installing parts we then charged this unit with r401A, only hcarging the cust 100.00for installein gthe comrpessor...cust paid total bill autho no. J393MF"