Service History 163 - D3 Appliance

We serviced a

GENERAL ELECTRIC WASHER-DRYER COM

Model GUD27GSSM2WW1

Near Colorado Springs, CO 80910

Roman

Job Details: 10/12/2023

Installed new lid lock and lid strike. Tested the washer and made sure it was working properly. Washer locking and running through the cycles. Washer working great.

We serviced a

WHIRLPOOL DISHWASHER

Model KDTM404KPS1

Near Carbondale, CO 81623

James R

Job Details: 10/12/2023

Put into service diagnostics. wont drain and a leak replaced door seal and drain pump. Unit was tilted forward leveled. test again. no error codes when done and unit did not leak. Ran several times. Customer signed waivers.Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

BOSCH DISHWASHER

Model SHP865ZD5N/01

Near Winter Park, CO 80482

Erik

Job Details: 10/12/2023

INSTALL DOR LOCK ASMJOB COMPLETE

We serviced a

GE REFRIGERATOR

Model GIE19JSNCRSS

Near Winter Park, CO 80482

Erik

Job Details: 10/12/2023

REPLACE DOOR JOB COMPLETE

We serviced a

WHIRLPOOL DISHWASHER

Model WDTA50SAKZ1

Near Colorado Springs, CO 80919

Glenn

Job Details: 10/12/2023

"Found water in drip / float tray under unit. Emptied & dried tray. Ran 5 Diag Cycles, not one drip of water. Possible loading issues or suds problem? Adjusted LF leg to provide better door closure. also ajusted door gasket. Unable to confirm leak at this time.All OPS Test:OK"

We serviced a

KITCHENAID DISHWASHER

Model KDFE104KPS2

Near Colorado Springs, CO 80921

Glenn

Job Details: 10/12/2023

Install New Door Panel. All OPS Test:OK

We serviced a

SUB ZERO REFRIGERATOR

Model 550

Near Manitou Springs, CO 80829

Ralph

Job Details: 10/11/2023

"unit had a frozen drain pan, preventing the return air, evap was blocked underneath, cleared ice obstruction and unit starred building a nice frost pattern, called prop manager and explained issue and the repair; (created new UIS, deleted prior attachment to UisID 105290)"

We serviced a

SAMSUNG DRYER

Model DVE50A8600

Near Pueblo, CO 81003

Kris

Job Details: 10/11/2023

found sock in blower ran test oP all ok unit is working to spec at this time.

We serviced a

GE REFRIGERATOR

Model GSS25GYPGCFS

Near Pueblo, CO 81005

Kris

Job Details: 10/11/2023

fc temp@-5.5 rc temp@49.8 found door not sealing adjusted door. ran test op all ok unit is working to spec at this time.

We serviced a

MIDEA WASHER

Model MLV45N1BWW

Near Pueblo, CO 81005

Kris

Job Details: 10/11/2023

pulled unit apart found sock in unit pulled sock ran test op all ok unit is working to spec at this time.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRT318FZDB10

Near Colorado Springs, CO 80920

Jessie

Job Details: 10/11/2023

Icemaker Inlet line not seated correctly pouring water out the back and not in the tray. Made sure Inlet line in secured and in place. Ran test op . No leaks all ok

We serviced a

WHIRLPOOL REFRIGERATOR

Model KRFF507HPS02

Near Colorado Springs, CO 80920

Jessie

Job Details: 10/11/2023

"Unit door was not sealing correctly, causing frost on top of freezer. Repositioned door, gasket good all ok"

We serviced a

WHIRLPOOL WALLOVEN

Model JMW3430DS02

Near Monument, CO 80132

Glenn

Job Details: 10/11/2023

"Unit having issues w/ console, many times no power or unable to power on unit w/o unplugging and cycling power.No Com at UI Console. Cycled power, unit now responsive.Also states that Microwave portion works, but not heating very well. Possible Bad Magnetron. Power Supply - WPW10260060 $270.40 , Console - W11236885 $1353.29 , Magnetron - W11346197 $257.82 , Thermostat - W11233913 $113.68 , Tax $163.61 , MPS $14.50 , Labor $319.95 , SC $149.95 , Estimate $2,643.20 , Customer Declined Estimate for Now. Paid SC fee of $149.95, Cell Used for charge: Autho#W4WNU9 Techline: Suggest Power PCB & ConsoleSR# 7737536472"

We serviced a

WHIRLPOOL DISHWASHER

Model KDTE104ESS1

Near Monument, CO 80132

Glenn

Job Details: 10/11/2023

"Actual Arrival time 3:10PM , CUSTOMERS LAST NAME IS: StoverNo longer fills after customer replaced Fill Valve & Float Switch. Diag > Error > F6E4 > Float Switch OpenUnit not washing. Starts Diag, No Fill, Found Melted and re-wired connections to Main Control. Techline: Suggest replace wiring harness before doing anything else to avoid problems going forward. No Power to Fill Valve, Valve ohm good, Float switch good. Suggest replace wiring harness, possible bad Main Control & Sump Assy. SR# 7737536061Decline Estimate for now. Unplugged unit for safety.Paid SC Fee of $149.95 + Tip $7.50 = $157.45 , Autho#KYVRC3"

We serviced a

SAMSUNG WASHER

Model WF42H5000AW/A2 11

Near Colorado Springs, CO 80910

Roman

Job Details: 10/11/2023

Installed new rotor and stator. Tested the washer and it will agitate and spin but still making a grinding noise from the the main tub bearing. Not sure if Samsung wanted us to repair that also cause it looks like BK had mentioned it the first time out and so did I when I was out last.

We serviced a

JENNAIR WALLOVEN

Model JMW2430DS02

Near Monument, CO 80132

Glenn

Job Details: 10/11/2023

"R & R New Console. Program. All OPS Test:OKPaid SC Fee of $149.95 + Labor $209.95 = $359.90, Autho# 4CP93R"

We serviced a

JENNAIR WALLOVEN

Model JJW2430WS02

Near Colorado Springs, CO 80921

Glenn

Job Details: 10/11/2023

"F2E1 - Stuck key/Shortedkey. Also heard a pop during cooking. Possible stuck key was from someone standing up against control. Cleared error codes. Diag > Bake is working. Ran Bake Cycle at 350F. Avg = 350F. All OPS Test:OK , Customer will continue to monitor. Paid SC Fee of $149.95, Autho# XHTX4N"

We serviced a

MAYTAG WASHER

Model MVW4505MW0

Near Colorado Springs, CO 80920

Glenn

Job Details: 10/11/2023

"Unit starts as designed, customer did not quite understand how to start unit. Instruct customer on starting unit. Paid SC $129.95, Check #4756, Autho# E9VWT9"

We serviced a

KITCHENAID ICE MACHINE

Model KUIA15PRLS11

Near Colorado Springs, CO 80904

Ralph

Job Details: 10/11/2023

unit working correctly now

We serviced a

MAYTAG DRYER

Model MEDB855DC4

Near Colorado Springs, CO 80918

Glenn

Job Details: 10/11/2023

"Unit makes loud noises.Found cracked blower wheel.Suggest replace Blower - WP697772 $81.58 , Tax $6.69 , MPS $14.50. Labor $219.95 , Customer Declined Estimate for now. Paid SC Fee of $149.95 + tIP $15.00 = $164.95, Autho# C4P9PM"

We serviced a

SAMSUNG DRYER

Model DVE45T6000W/A3

Near Calhan, CO 80808

Mathew

Job Details: 10/11/2023

"Found missing screw on terminal block, unit only getting 120vac. Replaced terminal screw, test op unit working as expected. Hass iOS beta expired, can not run hass. Serial and model match."

We serviced a

SAMSUNG MICROWAVE

Model ME21M706BAS/AA

Near Colorado Springs, CO 80915

Jeremy

Job Details: 10/11/2023

Installed new magnatron. Tested unit with cup of water. CX paid $369.90 on first visit.

We serviced a

BOSCH RANGE

Model HDIP056U/06

Near Pueblo West, CO 81007

Kris

Job Details: 10/11/2023

called techline. harness cx does not want to install harness at this time.

We serviced a

SAMSUNG WASHER

Model WA50R5400AV/US 03

Near Colorado Springs, CO 80925

Jeremy

Job Details: 10/11/2023

"Unit getting error codes Ub/Ur code displayed, Unbalance unit, not spinning. When I try to run diagnostic cycle I get code 1C- Water level Pressure Sensor. I double checked pressure sensor hose for leaks. No leaks. Frequency of pressure sensor not in required specification. Test at 25.53 KHz and should be at Frequency: Approx. 26.4 KHz without water (Min 25.9KHz). Need to replace suspension and pressure switch Parts $597.44 Labor $229.95 M&P $14.50 Total $890.88 CX denied repair Service Charge $129.95 auth PUP9PV"

We serviced a

FRIGIDAIRE REFRIGERATOR

Model FFTR1814QB1

Near Colorado Springs, CO 80907

Roman

Job Details: 10/11/2023

"Checked the freezer evaporator and checked the drain line, drain line is clear. Checked both gaskets and they are sealing well. Only thing I noticed was a small gap between the ff vent and the drain line drip pan. Also between the styrofoam. Put a piece of tape over it for now. Recommend seeing if that works for now."

We serviced a

PERLICK REFRIGERATOR

Model HP24RS4

Near Colorado Springs, CO 80908

Jessie

Job Details: 10/11/2023

Customer showed me DA error code. Unit switches were not aligning at the bottom. Made sure switches are making after adjustments. All ok

We serviced a

KITCHENAID MICROWAVE OVEN

Model KMHS120KPS

Near Pueblo, CO 81001

David

Job Details: 10/11/2023

"Replaced the microwave door and installed the Grease filter. Tested operation, all good"

We serviced a

GENERAL ELECTRIC DISHWASHER - BUI

Model GDF510PSR5SS

Near Pueblo, CO 81001

David

Job Details: 10/11/2023

"Installed door spring and cable, rollers Works nicely"

We serviced a

JENN-AIR ICE MACHINE

Model JUIFX15HX01

Near Colorado Springs, CO 80908

Jessie

Job Details: 10/11/2023

Replaced water Inlet and pump. Watched unit produce one batch of ice. All ok

We serviced a

GE DISHWASHER

Model GDF510PSJ0SS

Near Colorado Springs, CO 80920

Jessie

Job Details: 10/11/2023

Replaced flood switch. Ran unit. Unit is heating water well. All ok

We serviced a

MAYTAG WASHER

Model MVW4505MW1

Near Pueblo, CO 81004

David

Job Details: 10/11/2023

"Checked washer Replaced cam, actuator, and capacitor Ran through diagnostics, everything checked out.No error codes Ran a quick wash cycle Ran like it should Repositioned clamp on drain hose"

We serviced a

GE REFRIGERATOR

Model GWE19JYLGFFS

Near Vail, CO 81657

Erik

Job Details: 10/11/2023

REPAIR HANDLE - GOODconnect to smartHQservice:NO ACTIVE ERROR CODES*see quick picsTEMPS ARE NORMAL SINGLE COOLING SYSTEM ANYTHING ON TOP SHELP IS PRONE TO FREEZINGCX CAN CALL 1800 GE CARES FOR USE AND CARE SUGGESTIONS

We serviced a

MAYTAG DISHWASHER

Model MDB4949SKZ0

Near Colorado Springs, CO 80906

Carlos

Job Details: 10/11/2023

Found that dishwasher line is connected to the cold water valve in sink. The line is the wrong side to move back to the hot side. Cx needs to contact installers to move lines back into place.

We serviced a

SAMSUNG RANGE

Model NX58M6850SSAA

Near Colorado Springs, CO 80918

Jerimiah

Job Details: 10/11/2023

"Installed replacement fan and blowers. Found upper conv fan blade scratching back of oven cavity at 12:00 position, adjusted fan blades away from wall. Unit check ok, Cust will keep track of unit functionality. Adjusted surface burners to proper flame level."

We serviced a

WHIRLPOOL DISHWASHER

Model WDT750SAKZ1

Near Calhan, CO 80808

Aaron

Job Details: 10/11/2023

"Heating element shorted out, thermostat checks out okay, removed and replaced, tested unit through diagnostics, working and heating well now. Advised customer of 5 star survey."

We serviced a

MAYTAG DRYER

Model MDE4000AYQ

Near Colorado Springs, CO 80904

Carlos

Job Details: 10/11/2023

Ran test op. Heating components work ok. Advised cx to clean vents. $129.95 CC Auth# 33A9JE

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF555SDFZ15

Near Calhan, CO 80808

Aaron

Job Details: 10/11/2023

"Scratch on left side of door, removed and replaced door, no scratches or dents, verified by customer. Working well now. Advised customer of 5 star survey."

We serviced a

KITCHENAID REFRIGERATOR

Model KRMF706ESS01

Near Vail, CO 81657

Antonio

Job Details: 10/11/2023

Installed new door seal unit tested good

We serviced a

JENNAIR WALLOVEN

Model JMW2430DS01

Near Colorado Springs, CO 80919

Ralph

Job Details: 10/11/2023

cust to try and repair hisself...autho no.C9UHR9

We serviced a

SAMSUNG WASHER

Model WA55A7300AE/US

Near Colorado Springs, CO 80918

Brandon

Job Details: 10/11/2023

Replaced agitator and tested op all ok hass passed

We serviced a

MAYTAG WASHER

Model MVW7232HW0

Near Colorado Springs, CO 80906

Jeremy

Job Details: 10/11/2023

Washer getting errors F8E1 Long Fill and F0E3 Overload. Checked water valves and all working correctly. Checked pressure switch hose and couldnt find any splits or holes. Controlboard is the issue. Quoted CX Part $294.91 Labor $179.95 M&P $14.50. CX denied repair. Service Charge $129.95 CX paid Cash

We serviced a

ELECTROLUX WALL OVEN

Model EW30EW55PSD

Near Colorado Springs, CO 80918

Jerimiah

Job Details: 10/11/2023

"Installed replacement TCO, unit check ok, charged labor as quoted $199.45 CC Auth# U933K3"

We serviced a

WHIRLPOOL DISHWASHER

Model WDP540HAMZ0

Near Los Lunas, NM 87031

Larry

Job Details: 10/11/2023

Installed parts listed and tested good - Unit is good to go

We serviced a

SAMSUNG REFRIGERATOR

Model RF23HCEDBSR/AA

Near Colorado Springs, CO 80915

Brandon

Job Details: 10/11/2023

Replaced ice maker parts and tested op all ok

We serviced a

DCS PATIO HEATER

Model DRN-48N

Near Colorado Springs, CO 80919

Ralph

Job Details: 10/11/2023

"INSTALLED PART, AND UNIT CHECKED OKAY"

We serviced a

KITCHENAID REFRIGERATOR SID

Model KBSN602EBS01

Near Calhan, CO 80808

Aaron

Job Details: 10/11/2023

"Defrosted unit and replaced components, unit needs time to cool back down. Working well now. Total due was previously paid."

We serviced a

SAMSUNG REFRIGERATOR

Model RF4287HARS/XAA

Near Colorado Springs, CO 80918

James S

Job Details: 10/11/2023

Replaced PCB MAIN.Could not run HAAS. Unit is too old I believe. Only 1 port on PCB could be used.

We serviced a

WHIRLPOOL DRYER

Model WED5000DW2

Near Albuquerque, NM 87106

Jason

Job Details: 10/11/2023

installed seal unit checks ok

We serviced a

GENERAL ELECTRIC DISHWASHER - BUI

Model GDT645SYN3FS

Near Eagle, CO 81631

Erik

Job Details: 10/11/2023

install pump/ test: GOODJOB COMPLETE

We serviced a

SAMSUNG REFRIGERATOR

Model RF27T5501SR/AA

Near Colorado Springs, CO 80924

James S

Job Details: 10/11/2023

"Replaced ice maker, auger, and PCB MAIN.Unit passed HAAS.Tested for proper operation"

We serviced a

GE M/W OTR

Model JVM3160DF8WW

Near Colorado Springs, CO 80916

Jerimiah

Job Details: 10/11/2023

"Installed replacement mag assy. Adjusted vent blower to proper position, unit check ok."

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRQA59CNKZ

Near Los Lunas, NM 87031

Larry

Job Details: 10/11/2023

Installed IM and tested good - Unit is good to go

We serviced a

WHIRLPOOL WASHER

Model MVW5430MW1

Near Albuquerque, NM 87120

Jason

Job Details: 10/11/2023

installed cam and belt unit checks ok

We serviced a

KITCHENAID REFRIGERATOR

Model KRFC302ESS06

Near Albuquerque, NM 87120

Jason

Job Details: 10/11/2023

installed seal unit checks ok

We serviced a

WHIRLPOOL RANGE

Model WFE745H0FS

Near Albuquerque, NM 87120

Jason

Job Details: 10/11/2023

Installed control unit checks ok

We serviced a

WHIRLPOOL WASHER

Model WFW92HEFC0

Near Los Lunas, NM 87031

Larry

Job Details: 10/11/2023

CX compalint - Different error codes - Inspected unit and found user defined errors - Ran diag cycle and tested good - Unit is operating as designed - Collected $162.70

We serviced a

WHIRLPOOL DISHWASHER

Model WDT710PAHZ

Near Albuquerque, NM 87120

Jason

Job Details: 10/11/2023

Installed element ran diagnostic cycle unit opperation checks ok

We serviced a

KITCHENAID REFRIGERATOR

Model KSSS48QHB00

Near Colorado Springs, CO 80920

Jessie

Job Details: 10/11/2023

Compressor relay is shorted. Replaced relay and test op. Unit is cooling perfectly. Added a bit more Refrigerant. Monitored the unit. All ok

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF767SDHZ04

Near Clifton, CO 81520

James R

Job Details: 10/11/2023

Replace icemaker. Sealed cover over icemaker area. Cut pwr to unit to reset icemaker. did several test of F.F. icemaker. All checked ok in diagnostics. No error code in test 56 operation is normal. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

WHIRLPOOL DISHWASHER

Model WDT730PAHZ0

Near Grand Junction, CO 81505

James R

Job Details: 10/11/2023

Repositioned mounting screws so lines up correctly to mount handle. Put blue locktite on door handle screws. Tightened tight. Ok. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

KITCHENAID REFRIGERATOR

Model KBFN502ESS05

Near Albuquerque, NM 87123

Jason

Job Details: 10/11/2023

tightened handle. on this built in model you have to remove door skin to tighten handle there are no screws on front . unit checks ok

We serviced a

WHIRLPOOL DRYER

Model WGD86HEBW1

Near Rio Communities, NM 87002

Larry

Job Details: 10/11/2023

CX complaint - Dryer making loud squeeling noise - Inspected unit and found the idler failed - Replaced with TS and tested good - Colected $450.78 - Unit is good to go; used 1 W10837240 (Idler) from stock

We serviced a

SAMSUNG REFRIGERATOR

Model RF26HFENDSR/AA

Near Colorado Springs, CO 80923

Brandon

Job Details: 10/11/2023

"Replaced evap cover and cleared drain, all checks ok"

We serviced a

MAYTAG DRYER

Model MDE5500AYW

Near Elbert, CO 80106

Aaron

Job Details: 10/11/2023

"Checked over unit, temperatures are good, customer uses sensored cycle, was set on damp dry preference, sensor is communicating with the control correctly, advised customer on usage of sensored cycle, unit has good push at the vent. Heater assembly wp307178 $295.06Thermistor 307207 NLATax $Supplies $14.50Hc $129.95Labor $199.95Total job $30 day estimate No return on parts Auth $129.95 ck2759 #9K9N94"

We serviced a

WHIRLPOOL WASHER

Model WTW5057LW0

Near Pueblo West, CO 81007

David

Job Details: 10/11/2023

"Replaced motor, cam, belt, and shield Tested running quietly as normal."

We serviced a

SAMSUNG RESIDENTIAL REFR

Model RF28R7351SR/AA

Near Pueblo West, CO 81007

Kris

Job Details: 10/11/2023

installed damper ran test op all ok unit is working to spec at this time.

We serviced a

WHIRLPOOL DRYER

Model WGD4850HW1

Near Gypsum, CO 81637

Antonio

Job Details: 10/11/2023

Found vent clogged perventing unit from property working cx needs clean out vent to outside

We serviced a

MAYTAG DRYER

Model MED6630HC2

Near Gypsum, CO 81637

Antonio

Job Details: 10/11/2023

Found lumps of glue on drum removed until tested good

We serviced a

WHIRLPOOL DISHWASHER

Model WDF520PADM9

Near Pueblo West, CO 81007

James

Job Details: 10/11/2023

"installed ordered sump, tested ops all ckok. left litmus"

We serviced a

BOSCH DISHWASHER

Model SHPM65Z55N/20

Near Pueblo, CO 81001

Roman

Job Details: 10/10/2023

Installed new control board and called tech about the wires inside the door and made sure theyre in the correct places. Turned on the dw and ran diagnostics. Water fill error code but passed every other test. Dw working great.

We serviced a

GE M/W OTR

Model JVM6175YK5FS

Near Glenwood Springs, CO 81601

Erik

Job Details: 10/10/2023

INSATLL/ TEST:ROTATE FAN TO RECIRC POSITIONJOB COMPLETE

We serviced a

BOSCH DISHWASHER

Model SHPM78Z55N/22

Near Aspen, CO 81611

Erik

Job Details: 10/10/2023

INSTALL UI AND MCB/ TEST: GOODJOB COMPLETE

We serviced a

THERMADOR FRENCH DOOR REFR

Model T36BT925NS/12

Near Basalt, CO 81621

Erik

Job Details: 10/10/2023

INSTALL LEFT FF DOORJOB COMPLETE

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS555SIHZ06

Near Rifle, CO 81650

James R

Job Details: 10/10/2023

"Put into diagnostics. test 1,2 show ok but test 5 shows thermistor open. Opened door and took evap cover off. suddenly test 5 showed thermister reading as closed. checked reading. 9.0 defrost cycle 1.48 amps good. Called tech line that unit iced up again. Replaced evap thermistor and main electronic control. Removed all ice from evaporator. customer signed waivers. Please fill out whirlpool tech satisfaction survey. Thank You."

We serviced a

SAMSUNG DRYER

Model DVE45T3400P/A3

Near Pueblo, CO 81001

Jeremy

Job Details: 10/10/2023

No voltage to outlet. Checked out the breaker panel and there isnt a breaker for dryer. Cx will need to contact builder/ electrician to get dryer circut completed. Not able to run HASS due to no power to dryer. I asked CX to complete the survey.

We serviced a

KITCHENAID WALLOVEN

Model KOCE900HSS22

Near Carbondale, CO 81623

James R

Job Details: 10/10/2023

Removed door. checked assembly ok. Made some adjustments is closing ok door seal is sealing. Also adjusted hinged may sure were in right. ok. Put into clean cycle. Door does lock and unlock so is in ok. customer signed waiver. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

WHIRLPOOL DRYER

Model WED560LHW2

Near Carbondale, CO 81623

James R

Job Details: 10/10/2023

Checked operation of unit. Timed dry vent unhooked. Temp set to hi 155 degrees and low 130 good. checked operation on sensor dry hi temp 155 low 130 good. Checked. Sensor found one wire disconnected. reconnected test op's ok. Wet towels regular normal cycle with hi temp and more dry. Auto dry. Unit is runiing not shutting down after 5 minutes. is sensing the cloths. Unit is operating as designed. Signed waivers. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

WHIRLPOOL DISHWASHER

Model WDT750SAKZ1

Near Snowmass, CO 81654

James R

Job Details: 10/10/2023

Replaced drain pump test operation ok. customer signed waivers.Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

MAYTAG WASHER

Model MVW7232HW1

Near Rio Rancho, NM 87144

Larry

Job Details: 10/10/2023

CX complaint - Washer squeeking - Inspected unit and found the gearcase failed - Replaced with pre-id parts and tested good - Unit is good to go

We serviced a

WHIRLPOOL WALLOVEN

Model WOC54EC0AS04

Near Rio Rancho, NM 87144

Larry

Job Details: 10/10/2023

Inspected unit and found the magnatron failed arcing and damaging the inner wavegude - Unit is not repairable

We serviced a

WHIRLPOOL COOKTOP

Model WCG55US6HS00

Near Rio Rancho, NM 87144

Larry

Job Details: 10/10/2023

Informed cx that flames are at their lowest setting and the burner caps need to be properly in place - Unit is operating as designed - Collected $141.00

We serviced a

SCOTSMAN ICE MACHINE

Model DCE33PA- 1SSD

Near Colorado Springs, CO 80906

Ralph

Job Details: 10/10/2023

"made another adjustment to cube size control,cust to monitor."

We serviced a

WHIRLPOOL WASHER

Model WTW5057LW0

Near Peyton, CO 80831

Aaron

Job Details: 10/10/2023

Lower harness assembly w11643701 $Tax $Supplies $14.50 Hc $129.95Labor $Total job $No return on parts 30 day estimate Auth 129.95 hc #

We serviced a

GE OTR MICROWAVE

Model SCA1001HSS01

Near Colorado Springs, CO 80918

Jessie

Job Details: 10/10/2023

Changed customer provided light below. Cavity light is bad abd waveguide cover.Waveguide cover#wb06x10311 nlaCavity light assy#wb36x10182 nlaTax $Sc $129.95Msrp $14.50Labor $219.95Total $Parts are nla. I cannot order these parts. Customer can try and source. Labor 2 men $299.95 to remove unit if parts are found.

We serviced a

SAMSUNG REFRIGERATOR

Model RFG297AARS

Near Colorado Springs, CO 80907

Ralph

Job Details: 10/10/2023

DONT BELIEVE TEMPS WERE SET CORRECTLY CUST TO MONTOR...AUTHO NO. C4VP99

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS555SIHZ06

Near Rifle, CO 81650

James R

Job Details: 10/10/2023

Printed labels.Took pics ready to send. Part came in box with no packing to protect it. No wonder items get broke in shipping.

We serviced a

GENERAL ELECTRIC STACK UNIT

Model GUD27GSPMDG

Near Colorado Springs, CO 80919

Kris

Job Details: 10/10/2023

ran test op found loose connection on control board. reseated ran test op all ok unit is working to spec at this time.

We serviced a

BOSCH DISHWASHER

Model SHXM78Z55N/20

Near Monument, CO 80132

Kris

Job Details: 10/10/2023

no error codes. ran diagnostic cycle could not duplicate problem. cx will monitor unit.

We serviced a

THERMADOR FRENCH DOOR REFR

Model T36FT820NS/02

Near Monument, CO 80132

Kris

Job Details: 10/10/2023

installed valve ran test op all ok unit is workign to spec at this time.

We serviced a

WHIRLPOOL RANGE

Model WEG515S0FS2

Near Colorado Springs, CO 80927

Jerimiah

Job Details: 10/10/2023

"Unit leaking gas from top, found incoming supply line leaking at connector under control console, taped and tightened, tested with bubble solution. Verified no more smell or leak, unit check ok . Charged service call. $129.95 CC Auth# A9J4CHW10901554 RR valve $168.58W11690141 FR valve $75.25"

We serviced a

WHIRLPOOL RANGE

Model WFG550S0LZ1

Near Colorado Springs, CO 80923

Jerimiah

Job Details: 10/10/2023

Installed replacement DSI board and igniter. Cust will also look into swapping the gfci breaker for a standard breaker. adjusted bake shutter for high altitude and surface burners to proper height. Unit check ok

We serviced a

IKEA REFRIGERATOR

Model IRT138FDM00

Near Pueblo, CO 81005

James

Job Details: 10/10/2023

Installed ordered evap unit HelD vacuum. Charged with 4.16 oz of R134a observed frost pattern and cooling

We serviced a

SUB ZERO REFRIGERATOR SID

Model 590

Near Monument, CO 80132

Kris

Job Details: 10/10/2023

bypassed main power switch per sub zero. switch nla use jumpers in place of switch. ran test op all ok unit is working to spec at this time.

We serviced a

WHIRLPOOL REFRIGERATOR

Model 65465641

Near Colorado Springs, CO 80908

Kris

Job Details: 10/10/2023

fc temp@63.9 rc temp@61.0 unit has bad compressor cx does not want to go through with repairs.

We serviced a

SUB ZERO FREEZER

Model ID-24FI

Near Colorado Springs, CO 80907

Ralph

Job Details: 10/10/2023

installed part and unit checked ok

We serviced a

GAGGENAU COOKTOP

Model VG352-812

Near Colorado Springs, CO 80907

Jerimiah

Job Details: 10/10/2023

"Back right and back left, does not work, stem pulls out completely from rest of unit. Unit does not have serviceable parts any longer. Charging service call $149.95 CC Auth# JTLWY4"

We serviced a

FRIGIDAIRE FREEZER

Model 127

Near Colorado Springs, CO 80908

Kris

Job Details: 10/10/2023

product temp@22.4 ran test op found clogged evap drain. cleared out drain all ok unit is working to spec at this time.

We serviced a

KITCHENAID DISHWASHER

Model KDPM604KPS0

Near Colorado Springs, CO 80908

Kris

Job Details: 10/10/2023

installed panel ran test op all ok unit is working to spec at this time.

We serviced a

WHIRLPOOL WASHER

Model WTW5057LW0

Near Monument, CO 80132

Glenn

Job Details: 10/10/2023

"Not completing cycle, not draining.Found broken blue & Blk w/ wht stripe wires to drain pump.Repaired wires and provided enought slack so wires arent stretched again. All OPS Test:OKVerified w/ Rick in office, WP paying P & L, Customer paying SC fee of $129.95 , Autho# 3MNV49"

We serviced a

KITCHENAID DISHWASHER

Model KDTM404KPS1

Near Colorado Springs, CO 80921

Glenn

Job Details: 10/10/2023

"Install New Sump & Motor Assy, All OPS Test:OK, No Leaks, Installed Leak detector for safety. Informed customer about survey."