We serviced a
BOSCH WASHER
Model WFMC2201UC/13
Near Colorado Springs, Colorado 80910
David
Job Details:
01/27/2025
The door boot was installed upside down. Reoriented. the door is sealing better and lock is engaging.
We serviced a
WHIRLPOOL DISHWASHER
Model KDTE304DPA0
Near Colorado Springs, Colorado 80919
Charles
Job Details:
01/27/2025
Installed sump assembly and tested Labor $229.95 paid autho 44XP4L
We serviced a
MAYTAG DRYER
Model MDE5500AYW
Near Colorado Springs, Colorado 80917
Aaron
Job Details:
01/27/2025
"Control is intermittently sending power to components, unit worked at time of inspection, heating well, good temperature wavelengths, customer to monitor, control is no longer available. Control 33002844 NLATax $Supplies $14.50Hc $139.95Labor $199.95Total job $30 day estimate No return on parts Auth $139.95 hc #4YYX3A"
We serviced a
AMANA WASHER
Model NTW4516FW3
Near Peyton, Colorado 80831
Aaron
Job Details:
01/27/2025
"F2E1 stuck button F7E1 speed sensor F7E6 open motor error codes upon arrival, inspected unit and found Capacitor is shorted out, motor has good resistance levels and board is sending power to other components, needs Capacitor. Capacitor w11428524 $141.00Tax $11.56Supplies $14.50Hc $139.95Labor $179.95Total job $486.9630 day estimate No return on parts Auth $139.95 ck 5181 #3KWTNF"
We serviced a
JENNAIR RANGE
Model W30400B
Near Colorado Springs, Colorado 80907
Ralph
Job Details:
01/27/2025
unit over 20 uyrs cust to replace...autho no. M4EPH9
We serviced a
KITCHENAID RANGE
Model KFGD500ESS03
Near Pueblo, Colorado 81006
Domingo
Job Details:
01/27/2025
Replace igniter and test it and test it good customer had paid full price
We serviced a
MIELE COFFEE MACHINE
Model CM61
Near Colorado Springs, Colorado 80905
Ralph
Job Details:
01/27/2025
unit now has a faulty grinder but will not be able to grind coffee in the future
We serviced a
JENNAIR COOKTOP
Model JIC4536XS
Near Colorado Springs, Colorado 80904
Carlos
Job Details:
01/27/2025
Needs a Control board part is no longer available (W10857233) Cx paid SC $159.95 CC Auth# LAC4TX
We serviced a
BOSCH DISHWASHER
Model SHXM78Z55N/22
Near Colorado Springs, Colorado 80924
Charles
Job Details:
01/27/2025
"Water in vent fan making gurgling noise, vacuum out water. Rinsing dishes and using pods, advise on detergent use, suds getting in heater."
We serviced a
BOSCH DISHWASHER
Model SPE53C55UC/38
Near Edwards, Colorado 81632
Erik
Job Details:
01/27/2025
unit dropped or crushed?unit not repaiable *see quick picscall BSH TAG: case# 4105005284email pics to: customer-support@bshg.com
We serviced a
GE REFRIGERATOR
Model GFE28GELEDS
Near Colorado Springs, Colorado 80920
Charles
Job Details:
01/27/2025
"Fridge evaporator fan failed. Need WR60X26866 NEEDS AUTHORIZATION, picked up part from shop"
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS05
Near Pueblo West, Colorado 81007
James
Job Details:
01/27/2025
Installed ordered ice maker all ops test good
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ
Near Colorado Springs, Colorado 80910
Brandon
Job Details:
01/27/2025
Replaced sump assembly and tested op all checks ok
We serviced a
LG WASHER
Model WM8100HVA
Near Peyton, Colorado 80831
David
Job Details:
01/27/2025
"Replaced bad drain pump, Impeller loose. Ran cycle, machine is draining."
We serviced a
SAMSUNG RANGE
Model NE63T8511S
Near Colorado Springs, Colorado 80917
Brandon
Job Details:
01/27/2025
Replaced regulator and tested operation all checks ok
We serviced a
MAYTAG DRYER
Model MED8630HW1
Near Eagle, Colorado 81631
Antonio
Job Details:
01/27/2025
"Installed new element and cutoff, then ran a cycle for proper operation, and unit tested good. Also recommended cx have vent duct cleaned"
We serviced a
SAMSUNG RANGE
Model NE58F9500SS/AA
Near Colorado Springs, Colorado 80923
Mathew
Job Details:
01/24/2025
"Replaced stuck regulator. Test op on all cycles and heats, heat is regulating well. $179.95 CC Auth# CAT339"
We serviced a
MAYTAG DRYER
Model MED6230RHW3
Near Prineville, Oregon 97754
Austin
Job Details:
01/24/2025
Installed parts ordered. Tested unit. All ops sat per factory spec.
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Bend, Oregon 97707
Levi
Job Details:
01/24/2025
Found broken wire harness at pump wire again. Installed another wire harness and reinforced the location of the broken wire; used 1 W11643701 (Lower wire harness) from stock
We serviced a
KITCHENAID M/W OTR
Model KMLS311HWH09
Near Redmond, Oregon 97756
Levi
Job Details:
01/24/2025
"Replaced LH touch panel, tested, all checks okay"
We serviced a
WHIRLPOOL WASHER
Model WTW6157PB0
Near Redmond, Oregon 97756
Austin
Job Details:
01/24/2025
Installed parts ordered. Tested unit all ops sat unit drains per factory spec
We serviced a
KITCHENAID RANGE
Model KFGD500ESS11
Near Medford, Oregon 97504
Jeff
Job Details:
01/24/2025
Installed new board tested working as should
We serviced a
AMANA RANGE
Model AER6603SMS0
Near Colorado Springs, Colorado 80906
Carlos
Job Details:
01/24/2025
"Has F9E0 code. Cx needs electrician to repair wall outlet. L1 and Neutral have 220 VAC, this is incorrect and must be rectified."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT318FMDM10
Near Colorado Springs, Colorado 80915
Carlos
Job Details:
01/24/2025
Installed water valve all ok
We serviced a
AMANA DRYER
Model NED4655EW1
Near Colorado Springs, Colorado 80906
Carlos
Job Details:
01/24/2025
Installed Heater and cutoff. Unit failed air flow test absolutely no air flow when unit connected to vent. When disconnected air flows good. Need to have vents checked.
We serviced a
AMANA DRYER
Model NED4655EW1
Near Colorado Springs, Colorado 80906
Carlos
Job Details:
01/24/2025
"Installed element. Unit runs ok, fail air flow test, cx needs to have vents looked at."
We serviced a
AMANA REFRIGERATOR
Model ASI2575GRB11
Near Albuquerque, New Mexico 87110
Jason
Job Details:
01/24/2025
Installed parts unit opperation checks ok
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Monument, Colorado 80132
Dvante
Job Details:
01/24/2025
"Checked unit, found that the motor wasnt circulating the water inside. Went ahead and replaced the pump & motor assy. Tested diagnostic mode, the unit is spraying inside now. No leaks or error codes on display. Unit is operating as designed"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ00
Near Albuquerque, New Mexico 87108
Jason
Job Details:
01/24/2025
Checked unit found Ice maker power wire had backed out of plug re-seated connection unit checks ok
We serviced a
MAYTAG WASHER
Model MHW5630HC3
Near Pueblo West, Colorado 81007
Domingo
Job Details:
01/24/2025
Replace boards and shocks Rand diagnostic mode and test it good
We serviced a
MAYTAG DRYER
Model MED8630HW2
Near Central Point, Oregon 97502
Jeff
Job Details:
01/24/2025
Called tech line there system is down so couldn't get file number. We went thru machine and I found a neutral wire hanging in the back. Was told to connect to block and tested machine machine seems to be working cleared the f1e1 error code and isn't returning customer to monitor
We serviced a
WHIRLPOOL WASHER
Model CAE2745FQ2
Near Colorado Springs, Colorado 80915
Carlos
Job Details:
01/24/2025
Installed water valve all ok
We serviced a
AMANA DRYER
Model NED4655EW1
Near Colorado Springs, Colorado 80915
Carlos
Job Details:
01/24/2025
"Called Techline, spoke with Robert temps are ok in unit 175 on high temps drops to 119 while cycling on and off. Unit fail air flow test. Issues with ventilation cx needs to look at vents"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT318FMDM10
Near Colorado Springs, Colorado 80915
Carlos
Job Details:
01/24/2025
"7740809879 all things that can be done to reduce refrigerant noise have been done, used permagum on Evap, used mastic tape on clap tube. Bent drier to 45 degree angle. Refrigerant noise is normal nothing ese can be done to reduce it. Unit has a hole on right side of unit making noise sound louder, trade care team does not approve condemning the unit since it is past 30 day cosmetic warranty."
We serviced a
WHIRLPOOL WASHER-DRYER COM
Model WET4024HW0
Near Colorado Springs, Colorado 80919
Dvante
Job Details:
01/24/2025
"Checked unit, found humming noise from the motor. Had to push the drum to tumble. Went ahead and replaced motor and blower wheel. Tested unit, drum is tumbling when start. Unit is operating as designed."
We serviced a
AMANA DRYER
Model NED4655EW1
Near Colorado Springs, Colorado 80915
Carlos
Job Details:
01/24/2025
Unit fail air flow test cx needs to look at vents. Unit heats properly and turns. Cx needs to have vents looked at no air flow in dryer
We serviced a
WHIRLPOOL WASHER
Model WTW8127LW1
Near Grand Junction, Colorado 81503
James R
Job Details:
01/24/2025
"Signed disclaimer. Replaced washplate,screw,cap and agitator. Test operating as should. Please fill out tech satisfaction survey. Thank You."
We serviced a
WHIRLPOOL DRYER
Model WED5010LW1
Near Grand Junction, Colorado 81504
James R
Job Details:
01/24/2025
Signmed disclaimer. Started unit heat element is glowing bright red checked back pressure of vent is .80 too high. Should be less than .56 Customer will need to get this taken care of. Will affect dry times and will shorten the life of the heat element. Believe that issue is that heat element gets to hot due to restriction of the vent. Checked temperature of unit 160 degrees is cycling properly. Checked all electrical wiring in back and in unit at control all are in good condition. Unit is operating as should. Called safety .Please fill out tech satisfaction survey. Thank You. SR#7740682451
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT318FZDW11
Near Leadville, Colorado 80461
Antonio
Job Details:
01/24/2025
Installed new acu and thermistor fridge is at 36? and frezzer at -10? unit testing good
We serviced a
MAYTAG DISHWASHER
Model MDB9959SKZ0
Near Larkspur, Colorado 80118
Dvante
Job Details:
01/24/2025
"Checked unit, found the unit getting a F8E4. Replaced the door seal and float switch. Tested diagnostic mode, no errors or leaks. Unit is operating as designed."
We serviced a
WHIRLPOOL WASHER
Model WFW5605MW1
Near Albuquerque, New Mexico 87108
Jason
Job Details:
01/24/2025
Installed control ran quick cycle and diagnostic cycle unit opperation checks ok
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ1
Near Albuquerque, New Mexico 87121
Larry
Job Details:
01/24/2025
Installed sump and tested good - Unit is good to go
We serviced a
JENN-AIR RANGE
Model JJW3830LM00
Near Albuquerque, New Mexico 87113
Larry
Job Details:
01/24/2025
Installed controls and tested good - Unit is good to go
We serviced a
AMANA DRYER
Model NED4655EW1
Near Albuquerque, New Mexico 87112
Jason
Job Details:
01/24/2025
Installed part unit checks ok
We serviced a
KITCHENAID REFRIGERATOR
Model KRSF705HPS04
Near Medford, Oregon 97504
Jeff
Job Details:
01/24/2025
Found Ice maker motor bad customer had new ice maker from a previous tech visit installed tested working as should
We serviced a
MAYTAG DRYER
Model MEDB835DW3
Near Los Lunas, New Mexico 87031
Larry
Job Details:
01/24/2025
CX complaint - AF code on display - Inspected unit and found good airflow with and without the vent connected - Called techline and they could not provide an SR number because their system is down - Suspect cold air combined with longer vent run causing issue - Unit is operating as designed today
We serviced a
WOLF RANGE
Model SD60650DG/S/P
Near Bend, Oregon 97702
Levi
Job Details:
01/24/2025
"Installed both rework kits, tested, all checks okay"
We serviced a
LG DRYER ELECTRIC
Model DLE3470M
Near Colorado Springs, Colorado 80920
Jerimiah
Job Details:
01/24/2025
"Unit getting NP error code halfway thru. Per techline control board needs replacing. NP error code is due to something wrong with neutral line of power. Cust holding off. Labor would be $199.95 upon return service if chosen, Cust will look for new appliance. Charging service call $146.95 CC Auth# J9LX44, total with sc part labor tax MPs is $656. EBR85130511 main board $278.60"
We serviced a
WHIRLPOOL WASHER
Model MVW4505MW1
Near Colorado Springs, Colorado 80915
Mathew
Job Details:
01/24/2025
"Repaired wire into drain pump. Ran a factory cycle, reset machine. Test op all okay."
We serviced a
GE MICROWAVE
Model JVM3160DF8WW
Near Colorado Springs, Colorado 80917
David
Job Details:
01/24/2025
"Checked microwave, control board going out,Cx is opting to buy a new mw."
We serviced a
WOLF RANGE
Model DF48650G/S/P/LP
Near Sisters, Oregon 97759
Austin
Job Details:
01/24/2025
Installed recall kit. Tested unit all ops sat per factory spec.
We serviced a
SUB ZERO REFRIGERATOR
Model CL4850UFDID/S/P
Near Sunriver, Oregon 97707
Levi
Job Details:
01/24/2025
Replaced right hand door switch tested good
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5501SR/AA
Near Colorado Springs, Colorado 80918
Brandon
Job Details:
01/24/2025
"Error 39c, replaced ice maker cycled all checks ok"
We serviced a
SAMSUNG WASHER
Model WA51A5505AV/US
Near Peyton, Colorado 80831
Mathew
Job Details:
01/24/2025
Found 9c8 error on machine. Bad control. Replace control test op on OQC all okay.
We serviced a
SAMSUNG DRYER
Model DVE55CG7100VA3
Near Colorado Springs, Colorado 80920
Mathew
Job Details:
01/24/2025
"Found no continuity at high limit thermostat. Replaced element assy, test op on OQC and quick dry. All okay."
We serviced a
SAMSUNG DISHWASHER
Model DW80B7070UG/AA
Near Colorado Springs, Colorado 80922
Brandon
Job Details:
01/24/2025
"Call tech support for inspection, they told me to raise the front feet high as they would go, ticket being closed and sent to engineering Samsung will contact customer for next steps"
We serviced a
SAMSUNG DRYER
Model DVE52A5500W/A3
Near Monument, Colorado 80132
Mathew
Job Details:
01/24/2025
"Found bad pcb. Ran OQC after install, test op all okay. Educate Cx on using refresh cycle vs steam sanitize. Dryer is working as expected."
We serviced a
SAMSUNG MICROWAVE
Model ME21DG6300SRAA
Near Colorado Springs, Colorado 80921
Dvante
Job Details:
01/24/2025
"Checked unit, found the door wasnt opening properly from the hinge. Went ahead and replaced the door. Also the unit was hanging on the left side. Tighten the screw. Unit is operating as designed."
We serviced a
SAMSUNG REFRIGERATOR
Model RS28A500ASR/AA
Near Colorado Springs, Colorado 80951
Mathew
Job Details:
01/24/2025
"Found magnet out of place on door, not making contact with reed switch. Adjust reed switch, power cycle. Test op all okay."
We serviced a
SAMSUNG RANGE
Model NX58H9500WS/AA
Near Colorado Springs, Colorado 80919
Jerimiah
Job Details:
01/24/2025
Installed replacement igniter. Unit check ok. Charged labor as quoted chk#6804 $199.95 CK Auth# 3XCL44
We serviced a
GE GAS RANGE
Model JGB735SP1SS
Near Colorado Springs, Colorado 80908
Jerimiah
Job Details:
01/24/2025
"Bake igniter bad, needs replacing, Cust holding off, will call if chosen to continue with repairs. Labor would be $219.95 if chosen to do so. Charging service call. $139.95 CC Auth# TJU4RCWB13X25500 bake igniter $135.52"
We serviced a
MAYTAG WASHER
Model MVWB855DC0
Near Albuquerque, New Mexico 87108
Jason
Job Details:
01/24/2025
Checked unit found washplate had come looseand stripped both it and gearcase shaftSC$139.95MPS$17.50LABOR$249.95GEARCASE#W11393685$306.10SLIDER#W10734521$82.02WASHPLATE#W10902814$142.56SPANNER#W10909670$60.68TX$84.89TOTAL$1083.65 Auth code: 9W39NW$151.85
We serviced a
THERMADOR RANGE
Model prd486wigu
Near Colorado Springs, Colorado 80908
Jerimiah
Job Details:
01/24/2025
"Installed LP rework kit, unit check ok. Charged labor $199.95 CC Auth# 4TWNY4"
We serviced a
WHIRLPOOL OVEN
Model WOS51EC0AS04
Near Colorado Springs, Colorado 80922
Jerimiah
Job Details:
01/24/2025
"Unit dead, found TCO open, replaced, unit check ok charged service call, part tax MPs Labor 189.95 chk#2210 $412.94 CK Auth# THU994WPW10545255 TCO $63.35; used 1 WPW10545255 (Thermal fuse) from stock"
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ3
Near Sunriver, Oregon 97707
Levi
Job Details:
01/24/2025
Error code f8e4 indicated water in the overflow tray. Confirm there was water in it so I cleaned it out. Looks like the water is due to excess drippage from the drying vent. Went into programming mode and changed the dry cycle to reduce drippage as per Maytag service bulletin. All other checks okay
We serviced a
SAMSUNG DRYER
Model DV457GVGR/AA
Near Colorado Springs, Colorado 80908
Mathew
Job Details:
01/24/2025
"Replaced all four rollers and idler pulley. Test op on cycle, all okay. Collect labor 189.95 $189.95 CC Auth# HU4P9U"
We serviced a
WHIRLPOOL DRYER
Model WED5620HW1
Near Grand Junction, Colorado 81504
James R
Job Details:
01/24/2025
"Signed disclaimer. Tore apart found heat element bad and in need of a repair kit. Replaced both. Cleaned unit Reassembled run unit test operation is operating as should. Customer paid $574.70 auth code. C939CJPlease fill out tech satisfaction survey. Thank You.; used 1 WP3387747 (Element (Front Blower)), and 1 4392067 (Dryer Kit (4 Roller)) from stock"
We serviced a
SAMSUNG RANGE
Model NX58R9421SS/AA
Near Pueblo, Colorado 81007
James
Job Details:
01/24/2025
Installed ordered parts tested ops all ckok collected 219.95 $219.95 CC Auth# WRLJE4
We serviced a
ELECTROLUX DISHWASHER
Model FFCD2418US3A
Near Colorado Springs, Colorado 80909
David
Job Details:
01/24/2025
"Checked dishwasher, found bottom door sweep seal was out of place, reinstalled sweep, tested and is operating as designed."
We serviced a
DACOR REFRIGERATOR
Model DRF36C000SR/DA
Near Colorado Springs, Colorado 80921
Dvante
Job Details:
01/24/2025
Replaced freezer door. No damage to the new door. Door is opening and closing properly. Unit is operating as designed.
We serviced a
WHIRLPOOL WASHER
Model WTW8127LW1
Near Colorado Springs, Colorado 80925
David
Job Details:
01/24/2025
Installed agitator and screw. Cx going to keep an eye on it.
We serviced a
GE WASHER
Model GTW335ASN2WW
Near Pueblo, Colorado 81001
James
Job Details:
01/24/2025
Spanner nut was siezed on unit. Attempted removal for 40+ minutes. Nut would not come off. Called asu and they deemed unit unrepairable. Will contact customer within 24-48 hrs for next steps.
We serviced a
GE DRYER
Model GFD85GSPN1RS
Near Colorado Springs, Colorado 80924
Dvante
Job Details:
01/24/2025
Replaced the idler arm and rollers. Tested unit and no noises inside unit. Unit is working as designed.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHV01
Near Central Point, Oregon 97502
Jeff
Job Details:
01/24/2025
Installed holder
We serviced a
KITCHENAID DISHWASHER
Model KDFE204KPS1
Near Eagle Point, Oregon 97524
Jeff
Job Details:
01/24/2025
Installed parts ran diagnostic everything passed heater came on no error codes.
We serviced a
SAMSUNG REFRIGERATOR
Model RF30BB6200QLAA
Near Colorado Springs, Colorado 80922
Brandon
Job Details:
01/24/2025
"Replaced compressor, drier, vacuumed and charged unit to spec 78 g r600"
We serviced a
FRIGIDAIRE REFRIGERATOR
Model FRSS26L3AF
Near Pueblo West, Colorado 81007
Domingo
Job Details:
01/24/2025
Replace defrost thermostat and board test it and its cooling
We serviced a
WHIRLPOOL WASHER
Model WTW8127LC0
Near Fountain, Colorado 80817
David
Job Details:
01/24/2025
"Installed ordered parts, ran calibration cycles, and diagnostic cycle. All ran good."
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5241SG/AA
Near Colorado Springs, Colorado 80923
Mathew
Job Details:
01/24/2025
Replaced all parts. Test op all okay.
We serviced a
MAYTAG RANGE
Model MER7700LZ2
Near Pueblo, Colorado 81008
Domingo
Job Details:
01/24/2025
Check oven and it had loose wire connection by the power cord I tight those then check the temp by setting it at 350? and inside it was getting only 300? recalibrated to +30 re check it and set it at 350? and its 343? within range oven is working
We serviced a
MAYTAG DRYER
Model MED6630HC0
Near Pueblo West, Colorado 81007
James
Job Details:
01/24/2025
Installed ordered parts tested ops all ckok
We serviced a
WHIRLPOOL DRYER
Model WED9620HC2
Near Grants Pass, Oregon 97526
Jeff
Job Details:
01/23/2025
Found vent plugged repaired ran a diagnostic all passed
We serviced a
WHIRLPOOL WASHER
Model WFW9620HC3
Near Grants Pass, Oregon 97526
Jeff
Job Details:
01/23/2025
Went thru machine ran full diagnostic and found the boot makes some noise when starting spin cycle but then goes away. Will probably quite down a little after some more usage no errors did a factory reset. Working as should
We serviced a
KITCHENAID WALL OVEN
Model KOED530PPS00
Near Grants Pass, Oregon 97526
Jeff
Job Details:
01/23/2025
Installed new latch and ui tested good
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF535SWHZ12
Near Grants Pass, Oregon 97527
Jeff
Job Details:
01/23/2025
Found switch stuck repaired
We serviced a
KITCHENAID COOKTOP
Model KCGD500GSS05
Near Grants Pass, Oregon 97526
Jeff
Job Details:
01/23/2025
Found lose connection repaired working as should
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF577KPS02
Near Bend, Oregon 97701
Levi
Job Details:
01/23/2025
Found that door ceiling right hand side came loose and was preventing fridge from closing properly.
We serviced a
MAYTAG WASHER
Model MVWP586GW0
Near Colorado Springs, Colorado 80919
Dvante
Job Details:
01/23/2025
Replaced the control board. Tested diagnostic mode. No error codes and leaks. Water is filling at the correct water level. Unit is operating as designed.
We serviced a
MAYTAG REFRIGERATOR
Model MRFF4236RZ00
Near Colorado Springs, Colorado 80906
Carlos
Job Details:
01/23/2025
Installed module and switches all ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHZ18
Near Colorado Springs, Colorado 80903
Carlos
Job Details:
01/23/2025
"Installed sleeve, no leak from fill tube"
We serviced a
MAYTAG REFRIGERATOR
Model MRFF4236RZ01
Near Colorado Springs, Colorado 80906
Carlos
Job Details:
01/23/2025
Installed ice maker runs ok
We serviced a
MAYTAG WASHER
Model MVW6230RHW3
Near Colorado Springs, Colorado 80919
Dvante
Job Details:
01/23/2025
"Replaced the agitator, gearcase, and cam. Tested diagnostic mode. No leaks and error codes. Unit is spinning and agitating with no squeaking noises. Unit is operating as designed."
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017HZ09
Near Colorado Springs, Colorado 80915
Jerimiah
Job Details:
01/23/2025
Installed replacement OTR bulb. Unit check ok.
We serviced a
MAYTAG WASHER
Model MVW6230HW3
Near Colorado Springs, Colorado 80906
Carlos
Job Details:
01/23/2025
7740618976 Called tech line deemed unit as design
We serviced a
WHIRLPOOL MICROWAVE
Model WOC54EC0HS03
Near Monument, Colorado 80132
Jerimiah
Job Details:
01/23/2025
"Mw waveguide and cover caught fire, called safety SR#7740723724, took pics, contacted Techline, gave info and pics, was instructed to given Cust info. Was given Techline SR#7740802077. Unit does seem repairable with at minimum an upper waveguide cover, max getting cover and new magnetron. Closing call."
We serviced a
WHIRLPOOL RANGE
Model WFG320M0MS0
Near Tabernash, Colorado 80478
Antonio
Job Details:
01/23/2025
Installed new ignitor turn oven on realize that unit needs propane conversion.kit
We serviced a
KITCHENAID RANGE
Model KFDC506JSS01
Near Granby, Colorado 80446
Antonio
Job Details:
01/23/2025
"Found burners needed to be adjusted, so i trunned down flamec to allow proper gas flow to ignite. Unit tested good"
We serviced a
WHIRLPOOL DRYER
Model WED9620HC2
Near Aspen, Colorado 81611
James R
Job Details:
01/23/2025
Signed disclaimer. Tore apart and installed a repair kit. Also could see where drum was scraping the wall.Realigned front panel. Run a load in unit that is wet. Is not making the noise now. Please fill out tech satisfaction survey. Thank You.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS555SIHZ03
Near Pueblo, Colorado 81005
James
Job Details:
01/23/2025
Installed ordered parts tested ops all ckok left litmus
We serviced a
KITCHENAID DISHWASHER
Model KDTE404DSS1
Near Colorado Springs, Colorado 80921
Dvante
Job Details:
01/23/2025
Replaced the vent assembly and control board. Tested diagnostic mode. No error codes or leaks. Unit passed diagnostics. Unit is operating as designed.