We serviced a
MAYTAG WASHER
Model MVWB835DW1
Near Santa Fe, New Mexico 87508
Antonio
Job Details:
08/21/2025
cx complanit - burning smell - harns - wire was burning under unit - cx is going to purchase new unit - survey mentioned
We serviced a
DACOR RANGE
Model DOP48M86DAM
Near Pueblo, Colorado 81005
Domingo
Job Details:
08/21/2025
Call tech line and they said to hit the breaker for 5 min turn it back on and if it happens again it is the Control new is DG94-03241A price is $1450.73 will need to replaced also I told customer it needs to be connected to internet and the latest update updated which can cause that right now told customer to monitor its working correctly. If the problem persist it will need part number new is DG94-03241A
We serviced a
WOLF COOKTOP
Model CI365TF/S
Near Colorado Springs, Colorado 80921
Dvante
Job Details:
08/21/2025
"Checked unit, found chipped piece on left top corner of cooktop. Replaced cooktop glass. No damages. Display is functioning. Unit is working as designed."
We serviced a
WOLF DOUBLE WALL OVEN
Model D030U/S
Near Colorado Springs, Colorado 80906
Ralph
Job Details:
08/21/2025
"installed parts and unit checked okay, from previous note cust to pay an additional 175.36, for part and tax, autho no. 9f9ahf"
We serviced a
SPEED QUEEN DRYER
Model ADE4BRGS177TW01
Near Colorado Springs, Colorado 80908
Ryan
Job Details:
08/21/2025
Removed and replaced broken heating element and replace operating tstat and hi limit that came with kit. Tested operation and all now checks ok. RK
We serviced a
SAMSUNG DRYER
Model DV42H5200EF/A3 01
Near Peyton, Colorado 80831
Mathew
Job Details:
08/21/2025
Found obstruction in blower wheel. Remove obstruction. $359.85 CC Auth# XV33R4Svf $139.95. Preventative maintenance $119.95
We serviced a
BROAN VENT HOOD
Model 273603
Near Larkspur, Colorado 80118
Charles
Job Details:
08/21/2025
"Vent hood travels up & down without stopping, replaced parts per tech line, still having same issue.call tech line again and going to issue replacement and gave claim number NC37535."
We serviced a
SAMSUNG REFRIGERATOR
Model RF260BEAESG/AA
Near Colorado Springs, Colorado 80919
Dvante
Job Details:
08/21/2025
Place leakage kit in unit. No clogs through the drain tube. Water is draining properly. No leaks. Unit is operating as designed.$229.95 CC Auth# A4MYE3
We serviced a
JENN-AIR MICROWAVE
Model JMC2430IL03
Near Santa Fe, New Mexico 87508
Antonio
Job Details:
08/21/2025
cx complanit - error codes F2/E1 - used part that was shiped to cx home - unit is working as designed - survey mentioned
We serviced a
SAMSUNG DRYER
Model DV56H9100EG/A2
Near La Pine, Oregon 97739
Levi
Job Details:
08/21/2025
Replace the element and cleaned up roller bearings. Tested all checks okay. Temperatures were perfect at outside vent and dryer ran perfectly quiet
We serviced a
MAYTAG REFRIGERATOR
Model msb27c2xam00
Near Colorado Springs, Colorado 80917
David
Job Details:
08/21/2025
"Installed compressor, leak tested, evacuated, and charged system. Unit is cooling down good."
We serviced a
LG WASHER
Model WM4000HBA/01
Near Colorado Springs, Colorado 80920
Ryan
Job Details:
08/21/2025
Replaced vibration sensor and tested operation ok. Explained to customer when he overloads unit he will get the same error and he seems to think its ok if he does because its a big drum. RK
We serviced a
MAYTAG WASHER
Model MVW6500MBK
Near Colorado Springs, Colorado 80915
Carlos
Job Details:
08/21/2025
"Broken wire at lower harness, repair runs ok"
We serviced a
SAMSUNG DISHWASHER
Model DW80R9950UG/AA
Near Colorado Springs, Colorado 80918
Mauricio
Job Details:
08/21/2025
When installed they did not do a high loop on the drain hose causing dirty water to go back into unit I did a high loop to provide proper suction from drain pump to drain pipe unit passed all test in diagnostic mode
We serviced a
WHIRLPOOL WALL OVEN
Model WOC54EC0HS04
Near Albuquerque, New Mexico 87120
Larry
Job Details:
08/21/2025
CX complaint - Oven won't work after self clean - Inspeced unit and found F8E0 error - Unit will need fan and thermostat - CX wants to discuss repair with household - Coollected SC-suth-W4HC43
We serviced a
SAMSUNG REFRIGERATOR
Model RF263BEAESR/AA
Near Colorado Springs, Colorado 80907
Mauricio
Job Details:
08/20/2025
$139.95 CC Auth# 44EARM unit needs Da97-12661a filter case assembly cx wants to think it over before going forward if cx decides to go forward with repair please give job to BK and assign me as helper so I can learn this repair as it seems to be very common with these units ty
We serviced a
KENMORE REFRIGERATOR
Model 253.73774300
Near Colorado Springs, Colorado 80911
Mauricio
Job Details:
08/20/2025
$100.00 CK Auth# 3MNKNN installed new gasket
We serviced a
SAMSUNG RANGE
Model NSI6DG9900SRAA
Near Colorado Springs, Colorado 80925
Mathew
Job Details:
08/20/2025
"Replace cooktop, call Samsung to troubleshoot display issue. adjust display. Display power button now working."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHB05
Near Pueblo, Colorado 81005
Domingo
Job Details:
08/20/2025
Test ice maker it failed and replaced it with a new one and test it and it passed
We serviced a
SAMSUNG REFRIGERATOR
Model RF32CG5400SRAA
Near Colorado Springs, Colorado 80925
Mathew
Job Details:
08/20/2025
"Found stainless water connection line pinched, restricting water flow. Recommend Cx replace water fill line, water fill line not covered under warranty."
We serviced a
MAYTAG RANGE
Model MFGS4030RS0
Near Socorro, New Mexico 87801
Larry
Job Details:
08/20/2025
CX complaint - flames too high - Inspected unit and adjusted inner valves - Unit is good to go - Survey mentioned
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF535SWBM00
Near Medford, Oregon 97504
Jeff
Job Details:
08/20/2025
"Found frig is in garage, this frig is not able to work correctly in the environment. Its a house hold frig only. The evap is completely frozen customer to unplug unit to defrost. Auth 2780797 id 99ahp4."
We serviced a
WHIRLPOOL WASHER
Model WTW6157PB0
Near Roseburg, Oregon 97470
Thomas
Job Details:
08/20/2025
Replaced main control board. Advised customer of survey
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ0
Near Roseburg, Oregon 97471
Thomas
Job Details:
08/20/2025
Replaced heating element. Tried to turn water on under counter and found a leak. There is a hole just behind where the water turns on and off. Advised customer
We serviced a
ZLINE RANGE
Model SDRB36-A1
Near Colorado Springs, Colorado 80921
Ryan
Job Details:
08/20/2025
"Replaced control board and replace the tstat again. Unit is doing what it has done since first visit, I set bake to 350 and it goes to about 485 before it stop preheating and then never gets back down to 350. Tech support umavailable again with no call back. RK"
We serviced a
FRIGIDAIRE REFRIGERATOR
Model FRFS2823AWB
Near McMinnville, Oregon 97128
Nathan
Job Details:
08/20/2025
Cracked flex tray ice maker Replaced
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT541SZDM03
Near Los Lunas, New Mexico 87031
Larry
Job Details:
08/20/2025
Installed kit and tested good - Unit is good to go - Survey mentioned
We serviced a
AMANA DRYER
Model NED4655EW1
Near Rio Rancho, New Mexico 87124
Antonio
Job Details:
08/20/2025
cx complanit - timer knob not working - used parts that were shiped to cx home - unit is working as designed - survey mentioned
We serviced a
FRIGIDAIRE REFRIGERATOR
Model FFTR1835VSB
Near Woodland Park, Colorado 80863
Charles
Job Details:
08/20/2025
Replaced cold control and timer. All fans and compressor started
We serviced a
MAYTAG WASHER
Model MHW8630HC4
Near Los Lunas, New Mexico 87031
Larry
Job Details:
08/20/2025
Installed dispenser and tested good - Unit is good to go - Survey mentioned
We serviced a
SAMSUNG REFRIGERATOR
Model RF23BB860012AA
Near Colorado Springs, Colorado 80927
Brandon
Job Details:
08/20/2025
"Freezer door not closing all the way allowing frost build up, cleared all ice and tested operation all checks ok hass passed"
We serviced a
KITCHENAID REFRIGERATOR
Model KRQC736RPS00
Near Peralta, New Mexico 87042
Larry
Job Details:
08/20/2025
CX complaint - Making sizzling noise - Inspected unit and found drops of water falling on the heating element during defrost cycles - Unit is operatinged - Survey mentioned
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Estancia, New Mexico 87016
Jason
Job Details:
08/20/2025
Installed parts listed ran calibration cycle and quick wash. unit opperation checks ok. spoke to cx about review
We serviced a
AMANA WASHER
Model NTW4516FW4
Near Albuquerque, New Mexico 87110
Jason
Job Details:
08/20/2025
Installed agitator ran quick cycle to check opperation. unit opperation checks ok spoke to cx about review. also made store manager aware that if issue persists it may be also caused by loading issues such as being overloaded
We serviced a
GE RANGE
Model JGBS66REK6SS
Near Glenwood Springs, Colorado 81601
James R
Job Details:
08/20/2025
Signed disclaimer. Replaced gas valve checked for leaks none. Replaced igniter and test op's is operating as should. Please fill out tech satisfaction survey. Thank You.
We serviced a
SAMSUNG MICROWAVE
Model ME16A4021AS/A2
Near Colorado Springs, Colorado 80908
Brandon
Job Details:
08/20/2025
Replaced door and tested operation all checks ok
We serviced a
LG FREEZER
Model LRDCS2603S.ASTCNA0
Near Fountain, Colorado 80817
Ralph
Job Details:
08/20/2025
installed part and uniot checked ok
We serviced a
MIELE DISHWASHER
Model G858SCC1
Near Colorado Springs, Colorado 80906
Ralph
Job Details:
08/20/2025
"installed parts and unit checked okay, cust to monitor"
We serviced a
THERMADOR REFRIGERATOR
Model T36IB100SP/04
Near Glenwood Springs, Colorado 81601
Sean
Job Details:
08/20/2025
Verified the unit information & customer signed disclaimer.Checked the unit and removed the board installed the new one Tested unit tested good operating as designed by factory.If you are satisfied with the service I have provided you with today then please share your experience with others and fill out a technician survey.Thank you Your Technician today is Sean
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Bend, Oregon 97701
Levi
Job Details:
08/20/2025
"Replace control board, tested, alll checks okay"
We serviced a
GE WASHER
Model GFW850SPN5RS
Near Peyton, Colorado 80831
Ryan
Job Details:
08/20/2025
Replaced main control board and door lock. Tested operation ok. RK
We serviced a
JENN-AIR DISHWASHER
Model JDTSS245GX0
Near Bend, Oregon 97702
Levi
Job Details:
08/20/2025
"Replaced pump and board, tested, all checks okay"
We serviced a
GE WASHER
Model GFW850SPN0DG
Near Colorado Springs, Colorado 80924
Ryan
Job Details:
08/20/2025
"Removed and replaced main control board, tested operation ok through diagnostics, vent fan should now come on at end of cycle. RK"
We serviced a
GE WASHER
Model GFW550SSNW
Near Colorado Springs, Colorado 80911
Mauricio
Job Details:
08/20/2025
Control boared not aligned properly realigned control board unit tested to spec
We serviced a
LG REFRIGERATOR
Model LRYXC2606D.ASBCNA0
Near Colorado Springs, Colorado 80920
Ryan
Job Details:
08/20/2025
Removed and replaced mullion and torn door gasket. Doors are now even and sealing properly.RK
We serviced a
MAYTAG WASHER
Model MHW8630HW4
Near Sisters, Oregon 97759
Richard
Job Details:
08/20/2025
Tested unit unable to duplicate issue unit working as designed at this time job complete
We serviced a
THERMADOR OVEN
Model PDR484GGZS
Near Colorado Springs, Colorado 80906
Ralph
Job Details:
08/20/2025
installed parts andunit checked okay
We serviced a
SAMSUNG REFRIGERATOR
Model RF23M8590SG
Near Colorado Springs, Colorado 80919
Mathew
Job Details:
08/20/2025
Found broken wire at flex zone harness. Recommend flex zone harness replacement. Cx says they are going to fix wiring themselves. Charge Svf $160.94 CC Auth# 43NEJHSvf 139.95MPs 14.50Door wire harness $216.42 Tax $17.75$388.62Labor $189.95
We serviced a
KITCHENAID DISHWASHER
Model KDTE304RPS0
Near Colorado Springs, Colorado 80918
Mathew
Job Details:
08/20/2025
"Found control not responding. Cx states dispenser drawer not opening. Replace control, test op all okay. Found dispenser motor not aligned. Realigned motor and test op, unit working as expected."
We serviced a
KITCHENAID DISHWASHER
Model KDFM404KPS
Near Sunriver, Oregon 97707
Levi
Job Details:
08/20/2025
Found this to be a sudsing issue. Unit tested good once unit was rinsed out
We serviced a
JENNAIR WALL OVEN
Model JJW3830DP00
Near Divide, Colorado 80814
David
Job Details:
08/20/2025
"Installed control panel, set personality and tested. Working good."
We serviced a
AMANA DRYER
Model NED5800HW1
Near Los Lunas, New Mexico 87031
Larry
Job Details:
08/20/2025
Installed controls and tested good - Unit is good to go
We serviced a
MAYTAG WASHER
Model MVW4505MW2
Near Rio Communities, New Mexico 87002
Larry
Job Details:
08/20/2025
Installed control and tested good - Unit is good to go - Survey mentioned
We serviced a
SAMSUNG RANGE
Model NE63A6511SS/AA
Near Pueblo West, Colorado 81007
Domingo
Job Details:
08/20/2025
Replaced the gas regulators and the heat element test it and test it good
We serviced a
GE WASHER
Model GTW525ACW0WB
Near Pueblo, Colorado 81008
James
Job Details:
08/20/2025
Found loose wire at cntl causing door to not lock. Secured wire and tested unit with load all ops test good.
We serviced a
FRIGIDAIRE DISHWASHER
Model FFCD2418US
Near Pueblo West, Colorado 81007
Domingo
Job Details:
08/20/2025
Clean filter and around drain pump it had coffee grains or something clogging the pump once I clean all that the dishwasher came one hot water and everything
We serviced a
KITCHENAID KITCHEN
Model KDTE304RPS0
Near Colorado Springs, Colorado 80923
Aaron
Job Details:
08/20/2025
"Drain hose not connected to water assembly, corrected and tested, working and draining well now, verified by customer. Advised customer of situation and survey."
We serviced a
MAYTAG DRYER
Model MGD7230HW3
Near Colorado Springs, Colorado 80906
Carlos
Job Details:
08/20/2025
Installed control panel runs ok
We serviced a
MAYTAG DISHWASHER
Model MDB7749SBM2
Near Colorado Springs, Colorado 80923
Aaron
Job Details:
08/20/2025
"Used clear door to test unit, spray arms are good, unit has good push, set unit in best possible position, debris under float switch, tested unit, no leaks. Advised customer of situation and survey."
We serviced a
MAYTAG WASHER
Model MVW6230HW3
Near Colorado Springs, Colorado 80911
Carlos
Job Details:
08/20/2025
Ui was disconnected. Reconnected runs ok. Cx paid SC $139.95 CC Auth# KNXWLH
We serviced a
WHIRLPOOL WASHER
Model MVWB835DW3
Near Colorado Springs, Colorado 80925
Carlos
Job Details:
08/20/2025
Cx paid in full for parts and labor Autho #E4W3PL. Installed water valve runs all ok
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC704FPS06
Near Colorado Springs, Colorado 80924
Aaron
Job Details:
08/20/2025
"Right RC door gasket torn from use, removed and replaced, needs time to set. Advised customer of situation and survey."
We serviced a
MONOGRAM BI REFRIGERATOR
Model ZISS420DRFSS
Near Colorado Springs, Colorado 80906
Ralph
Job Details:
08/20/2025
"unit has a refrigerant leak, will need a new evap, heat exchanger, and drier, evap 1159.66, heat exchanger 204.74, drier 114.42, taxes 121.26, refrigeration 255.00, labor 2791.95, total 4647.03, cust paying service fee today of 189.95...autho no. 3FRY3T"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ04
Near Colorado Springs, Colorado 80918
Dvante
Job Details:
08/20/2025
Replaced tube. Tested ice maker. Water not splashing all over the freezer. Unit is operating as designed.
We serviced a
SAMSUNG DISHWASHER
Model DW80CG5020SRAA
Near Colorado Springs, Colorado 80919
Dvante
Job Details:
08/20/2025
"Checked unit, couldnt get the error code to replicate. No leakage issues. The water is draining properly. Tested and passed HASS. Unit is operating as designed."
We serviced a
WHIRLPOOL OTR MICROWAVE
Model WMH31017HS12
Near Rio Rancho, New Mexico 87144
Antonio
Job Details:
08/20/2025
cx complanit - microwave will not turn on - replaced unit - unit is working as designed
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ3
Near Rio Rancho, New Mexico 87144
Antonio
Job Details:
08/20/2025
cx complanit - error codes about 10 min sfter starting wash - used part that was shiped to cx home - unit is working as designed - survey mentioned
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF507HPS04
Near Sisters, Oregon 97759
Richard
Job Details:
08/20/2025
"Install new damper motor adjusted temperatures collected one 8995 from customer authorization number AKN49L, Transaction number 2779534"
We serviced a
WHIRLPOOL DISHWASHER
Model MDB8959SKW0
Near Albuquerque, New Mexico 87122
Jason
Job Details:
08/20/2025
Installed drain pump and checked one way valve valve checks ok. ran quick cycle unit opperation checks ok. spoke to cx about review
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ04
Near Rifle, Colorado 81650
James R
Job Details:
08/20/2025
Signed disclaimer. Replaced icemaker when connected it cycled and filled. Operating as should. Please fill out tech satisfaction survey. Thank You.
We serviced a
WHIRLPOOL RANGE
Model WFGS3530RS0
Near Monument, Colorado 80132
Dvante
Job Details:
08/20/2025
Replaced igniter and spark module. Unit is heating up properly and operating as designed.
We serviced a
SAMSUNG DISHWASHER
Model DW80B7070US/AA
Near Colorado Springs, Colorado 80917
Brandon
Job Details:
08/20/2025
Installed eak kit and tested operation all checks ok hass failed
We serviced a
JENN-AIR WALL OVEN
Model JMW2430LL03
Near Monument, Colorado 80132
Dvante
Job Details:
08/20/2025
"Checked unit, found the F2E0 error code. Replaced console. Buttons are responding properly. Nothing is stuck or shorted. Unit is operating as designed."
We serviced a
SAMSUNG DRYER
Model DVE45T6000V/A3
Near Colorado Springs, Colorado 80903
Charles
Job Details:
08/20/2025
"Wont start, belt off, disassemble to reinstall belt. Service fee $139.95, Labor $179.95, Total $319.90, paid in full autho 3T4V4R"
We serviced a
MIELE COFFEE MACHINE
Model CVA7445
Near Avon, Colorado 81620
Erik
Job Details:
08/20/2025
ACCESS WITH PROP MGMTINSTALL PUMP/ TEST: PASSJOB COMPLETECX NOT AVAILABLE FOR SIGNATURE
We serviced a
GE WASHER-DRYER COM
Model GUD27ESSM1WW
Near Vail, Colorado 81657
Erik
Job Details:
08/20/2025
ACCESS WITH PROP MGMTREMOVE DRUM AND CHECK OUTER DRUM ASM - FIN SCREW LOOSE AND RUBBING AGAINST SIDE WALLREINSTALL/ TEST: PASSJOB COMPLETECX NOT AVAILABLE FOR SIGNATURE
We serviced a
MAYTAG WASHER
Model MVW6500MBK0
Near Medford, Oregon 97504
Jeff
Job Details:
08/20/2025
Found bad capacitor replaced with new part off truck tested working as should. ; used 1 W11395618 (Capacitor) from stock
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHM13
Near Los Lunas, New Mexico 87031
Larry
Job Details:
08/20/2025
CX complaint - Fridge making loud noise - Inspected unit and found the IM fill tube misaligned causing ice to build up aronfd the evap van - adjusted and secured fill tube and tested good - Unit is good to go - Adjusted fill tube and
We serviced a
FRIGIDAIRE REFRIGERATOR
Model LFTR2045VF9
Near Peyton, Colorado 80831
David
Job Details:
08/20/2025
"Installed defrost timer, refrigerator started up and is cooling."
We serviced a
MAYTAG DRYER
Model MED6200KW1
Near Colorado Springs, Colorado 80927
Aaron
Job Details:
08/20/2025
"Idler wheel not in proper alignment, rollers have worn from tub movement, removed and replaced, tested unit, working and heating well now, air restriction with wall vent, did not pass card test, internal drum temperature up to 260f, recommend wall vent to be professionally cleared. Advised customer of situation and survey."
We serviced a
JENNAIR RANGE
Model JES9900BAB19
Near Sunriver, Oregon 97707
Levi
Job Details:
08/20/2025
Found convection element is bad but NLA.
We serviced a
LG WASHER
Model WM2487HWM
Near Colorado Springs, Colorado 80919
Charles
Job Details:
08/19/2025
"Play in basket and loud in spin, bearing failure, need rear shell and inner basket, 2007 model, parts no longer available"
We serviced a
AMANA WASHER
Model NTW4516FW4
Near Redmond, Oregon 97756
Richard
Job Details:
08/19/2025
Installed new control recalibrated unit and tested in a short cycle all tested fine at this time customer
We serviced a
WHIRLPOOL RANGE
Model WFE975H0HZ5
Near Ashland, Oregon 97520
Jeff
Job Details:
08/19/2025
"Contacted tech line 7742225952 and trouble shooted , issue is being sent to engineering to see if this is a control issue or not function for this model."
We serviced a
WHIRLPOOL RANGE
Model WSGS7530RZ0
Near Prineville, Oregon 97754
Richard
Job Details:
08/19/2025
"Installed new switch, harness assembly cycle tested unit all checks. Good at this time. Also adjusted all burners to burn properly job complete"
We serviced a
MAYTAG WASHER
Model MHW5630HW3
Near Bend, Oregon 97702
Levi
Job Details:
08/19/2025
Replace control board and perform diagnostic checks. All tests checked okay.
We serviced a
MAYTAG DRYER
Model MED6230RHW3
Near Grants Pass, Oregon 97527
Thomas
Job Details:
08/19/2025
Replaced all parts listed. Ran tested okay. Advised customer of survey
We serviced a
WHIRLPOOL WASHER
Model WTW8127LW1
Near Sunriver, Oregon 97707
Levi
Job Details:
08/19/2025
"Replace control board, performed recalibration cycle, tested and all checks okay"
We serviced a
WHIRLPOOL STACK UNIT
Model WET4027HW2
Near Ashland, Oregon 97520
Jeff
Job Details:
08/19/2025
Installed parts ran calibration and tested machine working as should
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SNHM09
Near Monument, Colorado 80132
Aaron
Job Details:
08/19/2025
"Evaporator fan motor bearings are loud, removed and replaced motor and Blade, unit needs time to cool. Advised customer of situation and survey."
We serviced a
WHIRLPOOL DISHWASHER
Model WDF341PAPW2
Near Colorado Springs, Colorado 80919
Dvante
Job Details:
08/19/2025
Replaced the pump & motor assembly. Tested diagnostic mode. Both spray arms are spraying water and spinning properly. Diverter is good. Unit is operating as designed.
We serviced a
WHIRLPOOL RANGE
Model WFGS3530RS0
Near Colorado Springs, Colorado 80925
Carlos
Job Details:
08/19/2025
"Igniter was not plugged in into spark module, reconnected runs all ok"
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Colorado Springs, Colorado 80915
Carlos
Job Details:
08/19/2025
"Installed control board, ran calibration and ran test all ok"
We serviced a
WHIRLPOOL WASHER
Model WFW5605MC1
Near Colorado Springs, Colorado 80919
Aaron
Job Details:
08/19/2025
"No error codes upon arrival, leveled unit and tested, suspension is good, inner tub movement is good, unit completed diagnostics, working well now. Advised customer of usage, load size, and survey."
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Monument, Colorado 80132
Aaron
Job Details:
08/19/2025
"Circulation motor is shorted out, unit only fills and drains, removed and replaced motor sump assembly, tested unit through diagnostics, working well now, no leaks, installed litmus strip and advised customer of survey."
We serviced a
MAYTAG DRYER
Model MED6230HW0
Near Pueblo, Colorado 81001
Domingo
Job Details:
08/19/2025
Check heat and lament was open replaced heat element and cutoff and test it and it worked
We serviced a
WHIRLPOOL RANGE
Model WFG525S0JS2
Near Monument, Colorado 80132
Dvante
Job Details:
08/19/2025
"Checked unit, found the bake igniter wanted to light up intermittently. Replaced spark module and harness. Tested and was able to make the igniter light up every time. Unit is operating as designed."
We serviced a
MAYTAG DISHWASHER
Model MDB8959SKZ3
Near Santa Fe, New Mexico 87501
Jason
Job Details:
08/19/2025
Checked unit found unit had a drain error. found drain valve stuck unstuck valve ran quick cycle unit opperation checks ok. spoke to cx about review
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017HZ11
Near Albuquerque, New Mexico 87121
Larry
Job Details:
08/19/2025
Installed parts listed and tested good - Unit is good to go - survey mentioned
We serviced a
MAYTAG WASHER
Model MVW6500MBK1
Near Santa Fe, New Mexico 87507
Jason
Job Details:
08/19/2025
Checked unit found gearcase had leaked most of its oil out. installed gearcase along with other parts listed. ran quick cycle unit opperation checks ok spoke to cx about review order#h3503411631