We serviced a
WHIRLPOOL WASHER
Model WTW8127LC0
Near Colorado Springs, CO 80925
Carlos
Job Details: 03/30/2023
Customer has a warranty from assurant and will send a new work order
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ08
Near Colorado Springs, CO 80924
Aaron
Job Details: 03/30/2023
"Left foam insulation used to support front condenser worn away from vibration, condenser coil vibrating along the frame of the unit, corrected and cleaned condenser, operating well now. Advised of 5 star survey"
We serviced a
MAYTAG DRYER
Model MEDC465HW0
Near Colorado Springs, CO 80915
Carlos
Job Details: 03/30/2023
Test opp found bad element . Installed listed parts.
We serviced a
WHIRLPOOL WASHER
Model MVW6200KW2
Near Fountain, CO 80817
Ken
Job Details: 03/30/2023
Installed cap and tested. Machine is spinning and agitating properly
We serviced a
WHIRLPOOL M/W OTR
Model WMH32519HW2
Near Albuquerque, NM 87109
Larry
Job Details: 03/30/2023
CX Complaint - MW light stays on - Inspected unit and found the light relay is stuck closed - Unit needs a new control - CX doesn't want bear the cost of repair and will replace - Collected $140.18-Auth-YFL9LETrip- $129.95Control - $206.50Labor - $149.95Tax - $38.32Total - $524.96
We serviced a
WHIRLPOOL WASHER
Model WTW5010LW0
Near Basalt, CO 81621
James R
Job Details: 03/30/2023
"replaced belt,drive pulley and shield. test cycle good. Please fill out whirlpool tech satisfaction survey. Thank You."
We serviced a
MAYTAG WASHER
Model MVWX655DW1
Near Albuquerque, NM 87108
Larry
Job Details: 03/30/2023
CX complaint - Dryer wont run keeps making humming noise - Inspected unit and found it in a water hazard state and the drain pump keeps running - Reset control and recalibrated - Unit is operating as designed
We serviced a
GENERAL ELECTRIC WASHER
Model GTW720BSN0WS
Near Pueblo West, CO 81007
James
Job Details: 03/30/2023
"Arrived and found washer severely damaged from suspension rod breaking while unit was spinning at high speed. Sever damage to outer chassis, tub, splash ring, lid & suspension rods. Called ge tech and got a case number of 09834474. Sent GE pictures of unit damage as well as wall damage. See quick pics advised cust to call customer relations in 24hrs"
We serviced a
KITCHENAID DISHWASHER
Model KDTM404KPS1
Near Colorado Springs, CO 80908
Aaron
Job Details: 03/30/2023
"Drain pump shorted out, replaced and tested unit, draining well and no leaks. Advised of 5 star survey"
We serviced a
SUB ZERO ICE MACHINE
Model UC-151
Near Divide, CO 80814
Ralph
Job Details: 03/30/2023
"not charging a fee, home is a summer home, ran by a property manager, she ndoes not go into the home on a constant basis, so she did not see issue. corrected the issue withthe curtain and unit checked okay"
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ0
Near Albuquerque, NM 87106
Larry
Job Details: 03/30/2023
CX complaint - DW door falls open - Inspected unit and found the door spring came off - Reinstalled spring and tested good - Unit is good to go
We serviced a
THOR RANGE
Model LRG360IU
Near Monument, CO 80132
Jessie
Job Details: 03/30/2023
Installed igniter unit tested good 1.9 amp draw
We serviced a
MAYTAG REFRIGERATOR
Model MSS25C4MGZ03
Near Santa Fe, NM 87508
Jason
Job Details: 03/30/2023
installed control and valve unit checks ok
We serviced a
MAYTAG WASHER
Model MVWB765FW2
Near Santa Fe, NM 87507
Jason
Job Details: 03/30/2023
installed lid unit checks ok
We serviced a
SAMSUNG WASHER
Model WF45B6300AW/US
Near Colorado Springs, CO 80927
Jonny
Job Details: 03/30/2023
"Couldn't get door to unlock so called techline, now I know how to open locked doors from here on out. There was a dent, took front cover off and let techline take pics. This job is considered damage by the customer, techline has there pics, installed the pcb, it worked perfectly, hass passed"
We serviced a
GENERAL ELECTRIC DRYER - ELECTRIC
Model PTD60EBPR0DG
Near Pueblo West, CO 81007
James
Job Details: 03/30/2023
Found belt off of pulley causing belt switch to trip. Checked all componets all ckok. Reassembled and tested. All ops test good
We serviced a
WHIRLPOOL DRYER
Model WED6620HC0
Near Granby, CO 80446
Antonio
Job Details: 03/30/2023
installed new inner glass and glass seal unit tested good
We serviced a
WHIRLPOOL REFRIGERATOR
Model KRFC300ESS07
Near Florissant, CO 80816
Ralph
Job Details: 03/30/2023
installed part and unit checked okay
We serviced a
MAYTAG DRYER
Model MEDX655DW1
Near Pueblo, CO 81001
James
Job Details: 03/30/2023
"Installed ordered part, tested ops all ckok"
We serviced a
BLUESTAR REFRIGERATOR
Model G91629NW
Near Colorado Springs, CO 80924
Jessie
Job Details: 03/30/2023
REPLACED ALL HANDLES PROVIDED BY CUSTOMER. cUSTOMER INSPECTED ALL OK
We serviced a
MAYTAG WASHER
Model MVW7230HC0
Near Santa Fe, NM 87505
Jason
Job Details: 03/30/2023
installed rotor and stator unit has slight noise in agitation cx to moniter if it gets worse opperation checks ok
We serviced a
WHIRLPOOL WASHER
Model WTW4955HW2
Near Santa Fe, NM 87505
Jason
Job Details: 03/30/2023
checked unit found pulley came loose and took belt out installed belt unit checks ok; used 1 W11239857 (Belt) from stock
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT318FZDW09
Near Rio Rancho, NM 87124
Joseph
Job Details: 03/30/2023
INSTALLED PART LISTED. UNIT TESTED GOOD. UNIT IS GOOD TO GO. LET CUSTOMER KNOW TO WAIT 24 HOURS FOR COOLING.
We serviced a
WHIRLPOOL DISHWASHER
Model KDTM404KPS0
Near Rio Rancho, NM 87124
Joseph
Job Details: 03/30/2023
installed part listed. unit tested good. unit is good to go.
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF507HBS02
Near Colorado Springs, CO 80927
Aaron
Job Details: 03/30/2023
"Diagnostics show ice maker thermistor is shorted out, needs ice maker assembly. Ice maker w11579560 $167.08Tax $13.70Hc $129.95Labor $189.95Total job $500.6830 day estimateNo return on partsAuth 129.95 #3X4P3E"
We serviced a
WHIRLPOOL RANGE
Model WFE540H0ES0
Near Colorado Springs, CO 80920
Glenn
Job Details: 03/29/2023
"Techline:DocumentedSent picsSR#7736065026Bake Element - W10779716 $94.94 , Oven Pan - W10777210 $143.58 , Tax $19.56 , MPS $14.50 , Labor $149.95 , Declined Estimate for now."
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Colorado Springs, CO 80922
Aaron
Job Details: 03/29/2023
"Dryer vent crushed and torn, retaining moisture leading to longer dry times. Corrected and tested unit, hood temps and venting well now.Advised of 5 star survey"
We serviced a
FRIGIDAIRE WALL OVEN
Model FGET3065PFC
Near Colorado Springs, CO 80919
Jerimiah
Job Details: 03/29/2023
Installed replacement thermal sensor.after 20 minutes after preheat unit started losing temp again. Cust will need relay board after all. $142.95 CC Auth# WYE93C $129.95 CC Auth# L9334H charged labor and service call.
We serviced a
SAMSUNG DRYER
Model DV42H5600GW/A3
Near Colorado Springs, CO 80921
Jonny
Job Details: 03/29/2023
"IndInstalled part, no more noise, custy is relieved"
We serviced a
SAMSUNG DISHWASHER
Model DW80B6061UG/AA
Near Colorado Springs, CO 80917
Brandon
Job Details: 03/29/2023
"Tested auto door mechanism it's good 1.5k ohms and it's getting 120v power, removed unit and found the hinges rubbing on unit creating to much friction to open door automatically, I adjusted hinges and tested op all, showed cx that it is working as intended now hass passed"
We serviced a
SAMSUNG DRYER ELECTRIC
Model DVE50R5400V/A3
Near Colorado Springs, CO 80906
Brandon
Job Details: 03/29/2023
"Found heater element no continuity, replaced heater dc47-00019a tested op all ok hass passed, vaccumed out inside unit cavity Collected total $438.31 Auth# 9U4JKESvf $129.95Labor $149.95Part $133.00Tax $10.91Mps $14.50; used 1 dc47-00019a (Heater) from stock"
We serviced a
WHIRLPOOL RANGE
Model WFE525S0JZ3
Near Colorado Springs, CO 80924
Glenn
Job Details: 03/29/2023
"For some reason this ticket didnnt save properly?Re-closing ticket. Also, already dispososed of old switch at customers house, as it did not prompt me to keep it the first time I closed ticket. Also, customer did sign ticket.Install new LF Burner Infinite Switch.All OPS Test:OK"
We serviced a
JENNAIR RANGE HOOD
Model JXW8536HS1
Near Monument, CO 80132
Glenn
Job Details: 03/29/2023
Hood missing retaining clip for cover.All OPS Test:OK
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF757SDHZ03
Near Los Ranchos de Albuquerque, NM 87114
Joseph
Job Details: 03/29/2023
installed parts listed. unit tested good. unit is good to go.
We serviced a
MAYTAG WASHER
Model MVW4505MW0
Near Los Lunas, NM 87031
Larry
Job Details: 03/29/2023
This was another cx instruct call - I explained the last time that there will be charges if we come back and dont find anything wrong - CX d0esn't like the way it sounds or works - CX refused to pay - CX owes $140.18
We serviced a
KITCHENAID DISHWASHER
Model KDFM404KPS0
Near Monument, CO 80132
Glenn
Job Details: 03/29/2023
"Unit delivered on 03-21-2023.Found water in lower front leak tray, causing float to initiate drain cycle. Emptied water, ran unit.. found water leaking down RS of unit during diag test. Unit is installed too tightly, and suggest have customer pull out unit, or call installer back to have it pulled out for inspection of where leak is coming from. Suggest call us back once unit is out."
We serviced a
SAMSUNG REFRIGERATOR
Model RF18A5101SR/AA
Near Colorado Springs, CO 80911
Brandon
Job Details: 03/29/2023
Replaced Evap cover assy tested op all ok ran noise test in hass to verify fan operation and check for noise all good hass passed
We serviced a
SAMSUNG DISHWASHER
Model DW80R2031US/AA
Near Colorado Springs, CO 80911
Brandon
Job Details: 03/29/2023
"Cx complaint is express 60 flashing within 10 minutes of starting cycle, water supply error, water supply may have been kinked because it is very long, loose connection on main board, tested all components all reading good, ran express 60 cycle with sanitize option all the way thru no errors after complete cycle"
We serviced a
SAMSUNG WASHER
Model WA52A5500AC/US
Near Colorado Springs, CO 80925
Brandon
Job Details: 03/29/2023
"Replaced pcb tested op all ok hass passed calibrated unit, cx has POP but will call into office to give it to us"
We serviced a
MAYTAG WASHER TOP LOAD
Model SAV515DAWW
Near Vail, CO 81657
Antonio
Job Details: 03/29/2023
found bad bearing and craked tank cx is goiung to buy new AUTH #339w4w
We serviced a
SAMSUNG DRYER
Model DV45H6300EG/A3
Near Monument, CO 80132
Jonny
Job Details: 03/29/2023
"Installed part, unit heats, custy is pleased Gave me cash as payment"
We serviced a
SAMSUNG WASHER
Model WA52M7750AV-A4
Near Monument, CO 80132
Jonny
Job Details: 03/29/2023
"Did diagnostic on unit passed, took pic. Gave custy washer education. she wants to order shocks on her own because she feels like something is still wrong paid svf Autho#9mfn33"
We serviced a
JENNAIR WALLOVEN
Model JMW2430LL00
Near Monument, CO 80132
Jerimiah
Job Details: 03/29/2023
"Cust not available, house was open during construction, no problem found, no scratches, missing parts, oven preheated, microwave convect working. Unknown why call was placed on unit. Closing call."
We serviced a
SAMSUNG REFRIGERATOR
Model RF265BEAESR/AA
Near Colorado Springs, CO 80924
Jonny
Job Details: 03/29/2023
"Installed parts, 2017 so not hass compatible, gave custy fridge education"
We serviced a
MAYTAG WASHER
Model MVW6200KW2
Near Fountain, CO 80817
Carlos
Job Details: 03/29/2023
Installed listed parts. Found that outlet where washer is plugged is really loose causing resistance build up in plug and generating heat taking out electronics. Informed customer to have outlets replaced. Washer runs ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT311FZDW02
Near Colorado Springs, CO 80910
Carlos
Job Details: 03/29/2023
"Installed listed parts, Runs ok.Customer will observe"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ11
Near Colorado Springs, CO 80908
Aaron
Job Details: 03/29/2023
"Ice maker is shorted out, valve has power but is not engaging, replaced parts and placed unit into harvest mode, filled and working well now. Advised customer of 5 star survey"
We serviced a
WHIRLPOOL OVEN
Model WFE525S0JZ0
Near Colorado Springs, CO 80938
Aaron
Job Details: 03/29/2023
"Control relay stuck for light, was able to reset the board and have the light shut off. Needs control board. Control w11544349 $260.86Tax $21.39Hc $129.95Labor $159.95Total job $572.1530 day estimateNo return on partsAuth 129.95 hc #AA3493"
We serviced a
SAMSUNG OVEN
Model NV51K6650DS/AA 01
Near Colorado Springs, CO 80904
Jerimiah
Job Details: 03/29/2023
"Replaced all parts. Still loud buzzing is occurring after 306 degrees on either oven. Disclosed to Techline extensive work history, Samsung will set unit up for replacement in review with case number below, joe from Techline says Cust will be contacted by 2-3 business days from today. #7005454644"
We serviced a
SAMSUNG DRYER - ELECTRIC
Model DVE45T3200W/A3
Near Colorado Springs, CO 80911
Jeremy
Job Details: 03/29/2023
Installed new parts. Dryer is now working. Asked cx to leave a review.
We serviced a
SAMSUNG DRYER
Model DVE50BG8300VA3
Near Colorado Springs, CO 80908
Jonny
Job Details: 03/29/2023
"Installed parts, gave customer dryer education, hass gave me c80 error code, I took a pic of it, he hasn't had his unit for more then a week, it came broken, I've seen this issue before and hope this fix3s it if not he needs a new unit"
We serviced a
WHIRLPOOL DRYER
Model WGD5605MC0
Near Los Lunas, NM 87031
Larry
Job Details: 03/29/2023
Cx complaint - dryer not starting - Inspected unit and found the drive belt failed - Replaced with TS and tested good - Unit is good to go; used 1 661570V (Drive Belt) from stock
We serviced a
GENERAL ELECTRIC DRYER
Model DBVH512EF0WW
Near Pueblo, CO 81005
Ken
Job Details: 03/29/2023
Installed parts and tested
We serviced a
KENMORE DRYER
Model 11087511702
Near Pueblo, CO 81004
Ken
Job Details: 03/29/2023
Installed element and tested
We serviced a
BOSCH DISHWASHER
Model SHE3AR76UC/28
Near Pueblo, CO 81005
Ken
Job Details: 03/29/2023
Tested dw and checks out OK. Dw is new to customer and she has not had a dw that doesn't use an element to dry. Explained how the drying system works and advised customer to crack door open after cycle finishes
We serviced a
ZLINE RANGE - GAS
Model RAS30
Near Colorado Springs, CO 80908
Jerimiah
Job Details: 03/29/2023
"Surface burners randomly ignited, randomly sent gas to burners, replaced gas regulator. Unit check ok. Cust will keep track of unit functionality."
We serviced a
WHIRLPOOL WASHER
Model LXR7244JQ1
Near Pueblo, CO 81004
Ken
Job Details: 03/29/2023
Installed pump and tested
We serviced a
SAMSUNG DISHWASHER
Model DW80R2031US/AA
Near Colorado Springs, CO 80908
Brandon
Job Details: 03/29/2023
"Replaced parts and tested op all ok ran quick cycle thru drain, fill and wash and confirmed vent fan is working, unit working as intended"
We serviced a
SAMSUNG DISHWASHER
Model DW80R2031US/AA
Near Colorado Springs, CO 80908
Brandon
Job Details: 03/29/2023
"Found leak coming from 90 on water valve, recommend replacing with brass 90 instead of plastic, also physical damage to base not covered by Samsung"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ03
Near Los Lunas, NM 87031
Larry
Job Details: 03/29/2023
Installed IM and fill tube and tested good - Unit is good to go
We serviced a
WHIRLPOOL WASHER
Model WTW5010LW0
Near Clifton, CO 81520
James R
Job Details: 03/29/2023
Replaced lid strike and motor run capacitor. test op's good. Normal operation. Please filll out whirlpool tech satisfaction survey. Thank You.
We serviced a
AMANA REFRIGERATOR
Model ASI2175GRW00
Near Moriarty, NM 87035
Jason
Job Details: 03/29/2023
installed parts unit checks ok
We serviced a
WHIRLPOOL WASHER
Model WTW5000DW3
Near Albuquerque, NM 87111
Jason
Job Details: 03/29/2023
installed suspension and re-leveled unit unit opperatiopn checks ok
We serviced a
MAYTAG WASHER
Model MVW6230HW3
Near Albuquerque, NM 87111
Jason
Job Details: 03/29/2023
installed latch and strike unit checks ok
We serviced a
MAYTAG REFRIGERATOR
Model MSS25C4MGZ06
Near Colorado Springs, CO 80924
Kris
Job Details: 03/29/2023
installed compressor. ran test op all ok. unit is working to spec at this time.
We serviced a
MAYTAG WASHER
Model MVW6200KW2
Near Albuquerque, NM 87110
Jason
Job Details: 03/29/2023
installed parts did not fix issue updated firmware per service pointer W11624962 unit opperation checks ok
We serviced a
MAYTAG DRYER
Model MGD7230HW1
Near Moriarty, NM 87035
Jason
Job Details: 03/29/2023
installed motor and blower wheel unit checks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHB08
Near Rio Rancho, NM 87144
Joseph
Job Details: 03/29/2023
repaired system with start device. unit tested good. unit is good to go.
We serviced a
BOSCH DISHWASHER
Model SHE65T55UC/02
Near Pueblo, CO 81006
James
Job Details: 03/29/2023
Installed ordered parts all ops test good
We serviced a
GE RANGE
Model JB250DF1CC
Near Pueblo, CO 81003
Ken
Job Details: 03/29/2023
Installed lock and tested
We serviced a
GE WALLOVEN
Model PTS7000SN2SS
Near Avon, CO 81623
Erik
Job Details: 03/29/2023
installed/test: GOODJOB COMPLETE!
We serviced a
SAMSUNG ELECTRON RANGE
Model NE59J7630SS/AA
Near Pueblo, CO 81006
James
Job Details: 03/29/2023
Installed ordered parts. All ops test good.
We serviced a
MIDEA DRYER - ELECTRIC
Model MLE52S7AGS
Near Colorado Springs, CO 80918
Kris
Job Details: 03/29/2023
installed all parts sent ran test op all ok. unit is working to spec at this time.
We serviced a
GE WASHER
Model GFW550SPN1DG
Near Beaver Creek, CO 81620
Erik
Job Details: 03/29/2023
install inverter kit and relocate ground off motor - test:JOB COMPLETE!
We serviced a
MAYTAG WASHER
Model MEDB835DW4
Near Belen, NM 87002
Larry
Job Details: 03/29/2023
CX complaint - Dryer makes a loud squeeling noise - Inspected unit and found the idler failed - Replaced with TS and tested good - Unit is good to go; used 1 W10837240 (Bracket) from stock
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW2
Near Pueblo, CO 81004
James
Job Details: 03/29/2023
"Installed ordered part. Tested ops, all ckok."
We serviced a
MAYTAG DRYER
Model MEDC465HW0
Near Belen, NM 87002
Larry
Job Details: 03/29/2023
CX complaint - dryer has no power - Inspected unit and found the fuse open - replaced with TS and tested good - Unit is good to go; used 1 WP3392519 (Fuse) from stock
We serviced a
MAYTAG RANGE
Model MER6770AAW
Near Pueblo, CO 81004
James
Job Details: 03/29/2023
Found unit with multiple issues. Door switch is faulty causing light to turn off and on repeatedly as well as cntrl malfunctioning and not sending correct voltage to elements. Needs switch and cntl. Both are nla advised cust xcel will reach out to discuss options.
We serviced a
SUB ZERO FREEZER
Model IC-24FI-LH
Near Pueblo, CO 81004
James
Job Details: 03/29/2023
Installed ordered parts tested operations all check OK advised customer 24-48 hours for ice production. Verified full warranty through 6-1-23 via service central
We serviced a
WHIRLPOOL DRYER
Model WED5050LW0
Near Pueblo, CO 81003
James
Job Details: 03/29/2023
Installed preordered parts all ops test good
We serviced a
MAYTAG WASHER
Model MVW7232HW0
Near Belen, NM 87002
Larry
Job Details: 03/29/2023
CX complaint - Washer making loud noise - Inspected unit and found a suspension rod missaligned - realigned and tested goo - Unit is good to go
We serviced a
MAYTAG WASHER
Model MVW7232HW0
Near Edwards, CO 81632
Antonio
Job Details: 03/29/2023
"installed new drive assembly, rotor and stator unit tested good"
We serviced a
SAMSUNG WASHER
Model WF45A6400AV/US
Near Colorado Springs, CO 80915
Jeremy
Job Details: 03/29/2023
Installed new parts. Ran HASS and passed. Unit is no longer shaking. Asked CX to do survey.
We serviced a
MAYTAG WASHER
Model MVW6200KW2
Near Avon, CO 81620
Antonio
Job Details: 03/29/2023
installed new latch and strike unit tested good
We serviced a
ASKO DISHWASHER
Model DBI663IS.U
Near Elbert, CO 80106
Kris
Job Details: 03/29/2023
unit was not mounted under cabinet. ran test op all ok unit is working to spec at this time.
We serviced a
WHIRLPOOL DRYER
Model WED5605MW0
Near Grand Junction, CO 81501
James R
Job Details: 03/29/2023
Tore apart and installed a dryer repair kit. Ran unit for awhile. Operation is good. No unusual noise. Please fill out whirlpool tech satisfaction survey. Thank You. ; used 1 4392067 (Dryer Repair Kit) from stock
We serviced a
WHIRLPOOL MICROWAVE
Model WML35011KW01
Near Grand Junction, CO 81507
James R
Job Details: 03/29/2023
"Removed unit off wall. Replaced PCBA,Thermal and Transformer. Tested. It is heating. Put mug in for a couple of minutes. Water boiling hot. Op's Ok. Reinstalled back on wall.Please fill out whirlpool tech satisfaction survey. Thank You."
We serviced a
MAYTAG DRYER
Model MED7230HW2
Near Grand Junction, CO 81505
James R
Job Details: 03/29/2023
Installed repair kit. Op's Good. Normal operation. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
SAMSUNG WASHER
Model WF45A6400AV/US
Near Colorado Springs, CO 80915
Jeremy
Job Details: 03/29/2023
Installed new parts. Ran HASS and passed. Unit is no longer shaking. Asked CX to do survey.
We serviced a
SAMSUNG WASHER
Model WF42H5000AW/A2
Near Colorado Springs, CO 80911
Jonny
Job Details: 03/29/2023
"Checked filter, filter was clogged, called techline and reset error code, washer is fixed gave custy washer education"
We serviced a
MIDEA DISHWASHER
Model MDT24H3AST
Near Pueblo West, CO 81007
Jessie
Job Details: 03/28/2023
#NAME?
We serviced a
FRIGIDAIRE REFRIGERATOR
Model FFFH20F2QWC
Near Monument, CO 80132
Kris
Job Details: 03/28/2023
cx is going to do repair himself sc 129.95 quote in qp.297309000
We serviced a
GE REFRIGERATOR
Model PGCS1PJZBSS
Near Colorado Springs, CO 80903
Ralph
Job Details: 03/28/2023
Installed part unit checked ok...customer paid total bill AUTHO U3LL3U
We serviced a
WHIRLPOOL DRYER
Model CEM2795JQ0
Near Colorado Springs, CO 80905
Carlos
Job Details: 03/28/2023
Installed parts. Test opp. All ok
We serviced a
WHIRLPOOL WASHER
Model WTW5010LW0
Near Pueblo West, CO 81007
Jessie
Job Details: 03/28/2023
"- no error codes found- verified the unit is getting stuck after wash. - replaced pcb, verfied hot and cold, agitation, and spin. unit passed service test5 star discussed"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ07
Near Pueblo, CO 81005
Jessie
Job Details: 03/28/2023
"- replaced bad listed parts, all ok"
We serviced a
ELECTROLUX WALLOVEN
Model EW30ES65GBC
Near Colorado Springs, CO 80918
Jerimiah
Job Details: 03/28/2023
"After self clean, unit is getting F15 on controller and E15 on surface burners. Door is stuck in locked position. Techline says j4-pin 1-3 black white. No voltage. Cust will hold off on repairs, will need minimally esec, fan, and latch assy. Charged service call $129.95 CC Auth# 94YL4E labor would be $189.95 if chosen.F15 TCO error E15 cooling fan Controller ESEC 316442120 $266.21Cooling fan 318073028 $308.86TCO 318004902 $111.92Lock motor 318261229 $115.38"
We serviced a
SAMSUNG DRYER
Model NX58K9500WG/AA
Near Colorado Springs, CO 80920
Jonny
Job Details: 03/28/2023
"Installed part, hass didn't work tbh, I didn't see where to connect, custy is happy her oven works"
We serviced a
WHIRLPOOL WASHER
Model WTW7340XW0
Near Pueblo, CO 81005
James
Job Details: 03/28/2023
"Found unit needing new bearing kit W10435302 172.66+tax, sc 129.95, labor 205.95, mps 14.50. Total: 537.22, cust declines collected 129.95 $129.95 CK Auth# 9ALYYC"
We serviced a
WHIRLPOOL DRYER
Model WED6120HC0
Near Pueblo, CO 81005
James
Job Details: 03/28/2023
Installed ordered parts all ops test good. Advised cust to wait 24/hr b4 use to allow glue to dry