We serviced a
WHIRLPOOL DISHWASHER
Model JDTSS246GM0
Near Albuquerque, New Mexico 87109
Jason
Job Details:
05/14/2025
Checked unit found drain pump not starting. installed pump ran quick cycle unit opperation checks ok. spoke to cx about review
We serviced a
WHIRLPOOL FREEZER
Model WZF34X18DW01
Near Los Lunas, New Mexico 87031
Larry
Job Details:
05/14/2025
Arrived to find the compressor damaged in shipping and the CX has correspondence from hew warranty company deeming the unit unrepairable and offering her other resolution - Pics in QP
We serviced a
MAYTAG DRYER
Model MEDB855DC4
Near Rio Rancho, New Mexico 87144
Antonio
Job Details:
05/14/2025
"cx complanit - noisy when in spin - used all parts that were shiped to cx home - noise is gone, unit is working properly - survey mentioned"
We serviced a
SAMSUNG DRYER
Model DVE50R5200W/A3
Near Colorado Springs, Colorado 80918
Jerimiah
Job Details:
05/14/2025
"Unit not heating found heater element bad, needs heater assy replaced. Cust will look for new unit. Charging service call $139.95 CC Auth# A9NLUPDc97-14486a heater assy $282.50"
We serviced a
SAMSUNG RANGE
Model NE58K9850WS/AA
Near Monument, Colorado 80132
Brandon
Job Details:
05/14/2025
Replaced regulator and tested operation all checks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRFA32SMHZ02
Near Rio Rancho, New Mexico 87144
Antonio
Job Details:
05/14/2025
cx complanit - contrlo panel not working - replaced cntrl-elec - unit is working properly - called technical support for programming - surevy mentioned - cx will also call back about right door seal gasket (SR#7741572941)
We serviced a
SAMSUNG WASHER
Model WD53DBA900HZA1
Near Colorado Springs, Colorado 80919
Brandon
Job Details:
05/14/2025
"Called tech support, found clog, removed debris from drain system and tested operation hass passed"
We serviced a
SAMSUNG DISHWASHER
Model DW80R9950US/AA
Near Colorado Springs, Colorado 80906
Mathew
Job Details:
05/14/2025
"Document leaking issue with tech line. Agent put ticket under review, will contact cx on how they are moving forward."
We serviced a
SAMSUNG MICROWAVE
Model ME21DG6300SRAA
Near Colorado Springs, Colorado 80907
Mathew
Job Details:
05/14/2025
Replace door and switches. Test op. Unit working as expected. All okay.
We serviced a
SAMSUNG MICROWAVE
Model ME17R7021ES/AA
Near Colorado Springs, Colorado 80906
Mathew
Job Details:
05/14/2025
Replace motor and door switch. Test op on all functions. All okay.
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5201SR/AA
Near Colorado Springs, Colorado 80921
Brandon
Job Details:
05/14/2025
"Replaced compressor and drier, vacuumed and charged unit 75g, hass passed"
We serviced a
LG REFRIGERATOR
Model LFC22770SW/03
Near Colorado Springs, Colorado 80918
Brandon
Job Details:
05/14/2025
"No errors, no cool all rooms, compressor running but not removing heat, need new compressor, svf paid $139.95 CC Auth# T94E4T, quoted $1,167.15, with LG covering compressor cost 10 year warranty"
We serviced a
MIELE COFFEE MACHINE
Model CVA7845
Near Avon, Colorado 81620
Erik
Job Details:
05/14/2025
NOT ON SITEtake data dump - saved - call miele TAG:miele ref#1010310448connect to MDU: reinstall programming/ test: PASS* see quick picsJOB COMPLETECX NOT AVAILABLE FOR SIGNATUE
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRB322DMBM01
Near Colorado Springs, Colorado 80907
Carlos
Job Details:
05/14/2025
"Compressor failure, damaged windings. Need Seal system repair cx will not repair"
We serviced a
MAGIC CHEF MICROWAVE
Model HVO170ST
Near Colorado Springs, Colorado 80907
Jerimiah
Job Details:
05/14/2025
"Unit not heating consistently. Adjusted, switches and door positioning. Unit check ok."
We serviced a
LG FREEZER
Model LHSXS2706S.ASTCNA0
Near Pueblo, Colorado 81003
Domingo
Job Details:
05/14/2025
Replaced compressor with evap replaced and filter check for leaks none and put it on vacuum for 20 min and then charge jt
We serviced a
LG DRYER
Model DLEX4000B.ABLEEUS
Near Colorado Springs, Colorado 80908
Ryan
Job Details:
05/14/2025
Found unit has a pinched exhaust vent causing issues and error codes other wise unit is working fine. Customer says he will contact installers to correct. RK
We serviced a
THERMADOR REFRIGERATOR
Model KBUDT4260A/02
Near Monument, Colorado 80132
Ryan
Job Details:
05/14/2025
Removed and replaced broken filter housing...installed new filter and purged.All checks ok.RK
We serviced a
SAMSUNG REFRIGERATOR
Model MKV190CL2J/SM1
Near Elbert, Colorado 80106
Brandon
Job Details:
05/14/2025
"No errors, inefficient compressor, compressor running not removing heat, cx doesn't want to repair svf paid $139.95 CC Auth# 9T44AR"
We serviced a
BOSCH DISHWASHER
Model SHP65CM5N/25
Near Colorado Springs, Colorado 80919
Ryan
Job Details:
05/14/2025
Installed new lock and door opener to correct problems with intermittent auto dry function. RK
We serviced a
BOSCH DISHWASHER
Model SGE53C55UC/51
Near Colorado Springs, Colorado 80916
Ralph
Job Details:
05/14/2025
"replaced listedf part, but unable to test unit as it currentlyb has no power to the outlet"
We serviced a
BOSCH DISHWASHER
Model shx78cc5uc/48
Near Colorado Springs, Colorado 80921
Mauricio
Job Details:
05/14/2025
Problem verified unit would no dispense soap from soap dispenser ran test cycle with soap out of dispenser and soap pod did not dissolve after further diagnostic notice no hot water was coming into unit verified unit was connected to hot water and hot water was coming out from sink both verified hot water supply in home was good and unit was installed properly to hot water valve in addition unit does not drain properly parts recommend to fix would be a motor for soap dispenser a new drain pump circulation pump and heating element spoke with Bosch triage support was advised that they are working on a return exchange for the customer and NOT TO ORDETparts at this time but to send are diagnostic notes via email to customer-support@bshg.com and subject line should be 4105267282
We serviced a
BOSCH DISHWASHER
Model SHS43CF5N/27
Near Florissant, Colorado 80816
Charles
Job Details:
05/14/2025
"Not filling with enough water, disconnect supply and ran to sink, no pressure. Need new supply line."
We serviced a
SAMSUNG DRYER
Model DVE45A6400V/A3
Near Pueblo, Colorado 81003
Domingo
Job Details:
05/14/2025
Replaced heat element and ran hass and it passed
We serviced a
BOSCH MICROWAVE
Model HMV5053U/03
Near Carbondale, Colorado 81623
Sean
Job Details:
05/14/2025
Checked the package good.Customer signed disclaimer.Removed top panel and removed the screws holding on the Control unit. Removed the wires to control and removed control.Installed the new control unit. Hooked up the wires and mounted it in place. Reassembled the unit.Tested. Unit heated up water good. And unit tested good. Unit operating as designed by factory.Thank you . And If you are satisfied with the service I performed today than please go online and share your experience with othersAnd fill out a technician survey.
We serviced a
WHIRLPOOL WASHER
Model WTW8500DC1
Near Colorado Springs, Colorado 80921
Aaron
Job Details:
05/14/2025
"F0E3F8E1F2E1F6E2 error codes upon arrival, inspected unit, cold water solenoid is not opening, verified power to the valve, gearcase is leaking as well, unit is loud during spin, customer declined gearcase estimate and is aware of situation. Inlet valve $118.02Tax $9.68Supplies $14.50Hc $139.95Labor $179.95Total job $462.1030 day estimate No return on parts Auth $139.95 #YC9P99"
We serviced a
MAYTAG DRYER
Model MED6230HW3
Near Colorado Springs, Colorado 80921
Dvante
Job Details:
05/14/2025
"Checked unit, found not heating and heater has an open line. Replaced heater. Tested unit, unit is heating. Unit is operating as designed."
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Socorro, New Mexico 87801
Larry
Job Details:
05/14/2025
Installed control and tested good - Unit is good to go - Survey mentioned
We serviced a
AMANA DRYER
Model NED5800HW1
Near Bend, Oregon 97702
Levi
Job Details:
05/14/2025
"Replaced heating element, tested, all checks okay"
We serviced a
GE DISHWASHER
Model GDT630PYRFS
Near Pueblo, Colorado 81005
Domingo
Job Details:
05/14/2025
Replaced drain pump test it and it test it good
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5241S
Near Pueblo West, Colorado 81007
Domingo
Job Details:
05/14/2025
Replaced ice maker ran hass and pass
We serviced a
WHIRLPOOL RESIDENTIAL REFR
Model WRF767SDHZ03
Near Colorado Springs, Colorado 80922
Aaron
Job Details:
05/14/2025
"Removed and replaced all modules, working well now, verified by customer, tightened door handles and advised customer of 5 star survey."
We serviced a
WHIRLPOOL WASHER
Model WTW8127LC0
Near Albuquerque, New Mexico 87113
Jason
Job Details:
05/14/2025
Checked unit found pressure hose kinking re routed hose ran quick cycle unit opperation checks ok. spoke to cx about review
We serviced a
WHIRLPOOL WALL OVEN
Model KOCE500ESS20
Near Albuquerque, New Mexico 87123
Jason
Job Details:
05/14/2025
Installed parts listed cx cooked popcorn in unit to check unit opperation checks ok. spoke to cx about review
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5501SR/AA
Near Colorado Springs, Colorado 80921
Dvante
Job Details:
05/14/2025
"Checked unit, found the family hub not turning on. Unplugged and plugged the unit, hub is turning on. Ran the panel function test, no errors. Unit is operating as designed."
We serviced a
FRIGIDAIRE RANGE
Model GCRE3060AFH
Near Colorado Springs, Colorado 80918
Jerimiah
Job Details:
05/14/2025
Installed lamp lenses. Unit check ok.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ08
Near Pueblo West, Colorado 81007
Domingo
Job Details:
05/14/2025
Replace heater and evap fan with harness test it and test it good
We serviced a
WHIRLPOOL WASHER
Model WTW5105HW2
Near El Jebel, Colorado 81623
Josh
Job Details:
05/14/2025
"Customer signed disclaimer. Verified MN SN. Customer states that unit leaks water periodically. Tech performed 2 test cycles, confirming customer concern after second cycle. Further inspection found that the drain pump connector was not fully engaged. Technician corrected and performed test cycle, confirming all functions. Unit is functioning properly within manufacturer specifications."
We serviced a
LG WASHER
Model WM9500HKA
Near Colorado Springs, Colorado 80919
Brandon
Job Details:
05/13/2025
"Replaced pump and tested operation, all checks ok"
We serviced a
WHIRLPOOL DRYER
Model WCD5090JW0
Near Ashland, Oregon 97520
Jeff
Job Details:
05/13/2025
Installed parts tested machine working as should
We serviced a
WHIRLPOOL DISHWASHER
Model WDF341PAPW1
Near Medford, Oregon 97504
Jeff
Job Details:
05/13/2025
Installed sump tested working as should no leaks
We serviced a
WHIRLPOOL RANGE
Model WFES7530RZ0
Near Shady Cove, Oregon 97539
Thomas
Job Details:
05/13/2025
Replaced parts listed. Customer will test later. Advised customer of survey
We serviced a
WHIRLPOOL WASHER
Model WFW5605MW1
Near Bend, Oregon 97702
Levi
Job Details:
05/13/2025
"Checked drain pump to see if issue was coincidence and only found a partial blockage, not enough to cause the issue. Also heard clunking noise during spin and found that cover on control board was not in place and was bumping into tub during spin. Both of these findings may be the cause of the issue so we will try this and see how it goes."
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Medford, Oregon 97501
Jeff
Job Details:
05/13/2025
Customer instruct on proper usage.
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Colorado Springs, Colorado 80923
Aaron
Job Details:
05/13/2025
"F0E5 off balance load error code upon arrival, leveled unit and tested, unit is working well, unit has a pan and is on carpet with cushioning allowing movement. Advised customer of situation and survey."
We serviced a
MAYTAG WASHER
Model MVW7232HW2
Near Pueblo, Colorado 81007
James
Job Details:
05/13/2025
Went through all functions of unit all ops test good. No errors found. Cust is unhappy with unit. Went though operations and cycle selection. Started cycle with customer show proper loading and sorting. Customer instructions.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHV04
Near Colorado Springs, Colorado 80906
David
Job Details:
05/13/2025
"Installed ordered parts, about the same sound level"
We serviced a
MAYTAG DRYER
Model MED6230HW3
Near Colorado Springs, Colorado 80911
Carlos
Job Details:
05/13/2025
Removed debris between tub and bulkhead runs ok
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Monument, Colorado 80132
Dvante
Job Details:
05/13/2025
"Checked unit, found motor not running. Was getting F4E3 error. Replaced pump & motor assembly. Tested diagnostic mode, no error codes or leaks. Unit is running and operating as designed."
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ1
Near Colorado Springs, Colorado 80916
Carlos
Job Details:
05/13/2025
"7741564098, Cx needs to prime hot water at their sink prior to use of dishwasher. On start water on entry reads 89F degrees water needs to runs at minimum of 120F degrees. Recommend also cx does not rinse off plates before using dishwasher."
We serviced a
MAYTAG WASHER
Model MVW6230HW3
Near Colorado Springs, Colorado 80919
Dvante
Job Details:
05/13/2025
"Checked unit, found it wasnt getting power. Went ahead and replaced the wire harness and ui control. Tested diagnostic mode, no error codes or leaks. Unit is turning on properly and operating as designed."
We serviced a
KITCHENAID HEATER
Model KUID508HPS02
Near Breckenridge, Colorado 80424
Antonio
Job Details:
05/13/2025
Disclaimer signed found water line kinked in back of unit corrected issue. Then turned the unit back on and water is now filling the water resovor unit testing good
We serviced a
KITCHENAID WALL OVEN
Model KOES530PPS00
Near Glenwood Springs, Colorado 81601
Josh
Job Details:
05/13/2025
"Customer signed disclaimer. Verified MN SN POP.Customer states that unit displays error code and does not function. After power cycle, unit is functioning properly, within manufacturer specifications. Technician tested bake function at 350 and 500 degrees (maintained for 20 min @500f), broil functions properly with no errors."
We serviced a
KITCHENAID DISHWASHER
Model KDTM404KPS2
Near Glenwood Springs, Colorado 81601
Josh
Job Details:
05/13/2025
"Customer signed disclaimer, verified MN SN POP. Customer states that units top rack does not pull out appropriately. Technician confirmed customer concern, upper rack is misaligned/rt bracket is not functioning. Technician reinstalled the upper rack in track, and confirmed proper operation and alignment. Unit is functioning properly within manufacturer specifications."
We serviced a
WHIRLPOOL WASHER
Model WTW6157PB0
Near Albuquerque, New Mexico 87121
Larry
Job Details:
05/13/2025
Installed control and tested good - Unit is good to go - Repair made at Rent-A-Center
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ11
Near Rio Rancho, New Mexico 87124
Antonio
Job Details:
05/13/2025
"cx complanit - buzzing noise - called technical support to have it documented - adjusted fron two wheels,buzzing noise stopped - survey mentioned - SR# 7741559963"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ19
Near Rio Rancho, New Mexico 87124
Antonio
Job Details:
05/13/2025
cx complanit - led lights are dimming - used part that was shiped to cx home - unit is working properly - survey mentioned
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ11
Near Albuquerque, New Mexico 87104
Larry
Job Details:
05/13/2025
CX complaint - Making buzzig noise - Inspected unit and found it is still over filled with product causing product to vibrate and make noise - Advised cx to thin out product - Unit is operating as designed - COllected SC-auth3CXW4M
We serviced a
MAYTAG WASHER
Model MVW7232HW2
Near Albuquerque, New Mexico 87120
Larry
Job Details:
05/13/2025
CX complaint - Washer not draining - Inspected unit and found the harness to the drain pump loose - Secured harness and tested good - Unit is good to go - Survey Mentioned
We serviced a
KITCHENAID M/W OTR
Model KMHS120ESS11
Near Santa Fe, New Mexico 87505
Jason
Job Details:
05/13/2025
Could not duplicate issue spoke to cx about making sure traavel path of turntable is clean and clear. unit opperation checks ok at this time. spoke to cx about review
We serviced a
SAMSUNG REFRIGERATOR
Model RF28HFEDTSR/AA
Near Colorado Springs, Colorado 80921
Brandon
Job Details:
05/13/2025
"Unit sitting a zero in freezer and 39 in fridge, unit was overcharged with refrigerant, evacuated and charged unit, all checks ok"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ01
Near Madras, Oregon 97741
Richard
Job Details:
05/13/2025
Installed new inlet valve for icemaker in freezer section tested unit all checks good at this time. No leaks at valve.
We serviced a
WHIRLPOOL WASHER
Model MVW7232HW0
Near Santa Fe, New Mexico 87505
Jason
Job Details:
05/13/2025
installed parts listed ran calibration and quick wash cycle unit opperation checks ok. spoke to cx about review
We serviced a
WHIRLPOOL DRYER
Model MED3500FW0
Near Colorado Springs, Colorado 80919
Ryan
Job Details:
05/13/2025
Found rollers and pulley making excess noise. Installed dryer maintenance kit and tested operation all now checks ok. RKPart 77tax 6.31materials 14.50Labor 239.95Service call 139.95Total 477.71Auth 39R3P9
We serviced a
SAMSUNG REFRIGERATOR
Model rf22n9781sg/aa
Near Colorado Springs, Colorado 80908
Brandon
Job Details:
05/13/2025
"Fridge fan is working now no issues error code 40c needs new auger, svf paid $139.95 CC Auth# RFWC93"
We serviced a
WOLF RANGE
Model RS64GLP
Near Larkspur, Colorado 80118
Jerimiah
Job Details:
05/13/2025
"Broil still getting fireball after delayed ignition, called techline. Techline says pressure for NG is 7-14 pressure, LP is 11-14. Orange broil base gasket could be culprit, checked it, did have some leakage around, patched, but no effect at all on fireball issue. Last thing that can be checked is gas pressure, advising @11 pressure. Under grace period. Closing call. 9011512 Orange broil base gasket."
We serviced a
SUB ZERO REFRIGERATOR
Model CL4850SID/O
Near Colorado Springs, Colorado 80919
Ralph
Job Details:
05/13/2025
cycled and filled ice mkr and now cust to monitor
We serviced a
FISHERPAYKEL DISHWASHER
Model DD24DHTI9
Near Colorado Springs, Colorado 80905
Ralph
Job Details:
05/13/2025
"PRISM ON THE SIDE HAD FALLEN OFF, REATTACHED AND UNIT CHECKED OKAY, AUTHO NO. E9WAVL"
We serviced a
KITCHENAID COMPACTOR
Model KUCS03FTSS0
Near Colorado Springs, Colorado 80919
Ralph
Job Details:
05/13/2025
cust is going to replace the unit...autho no. tekk4k
We serviced a
MAYTAG WASHER
Model MVW6500MBK0
Near Ashland, Oregon 97520
Jeff
Job Details:
05/13/2025
Hot water was shut off turned on and tested working as should
We serviced a
PROFILE RANGE
Model PT970B0M1BB
Near Colorado Springs, Colorado 80920
Ryan
Job Details:
05/13/2025
"Unit working fine at this time and temp probe working properly.Unit could have had failure at main control board, but part is no longer available. RKS/C 139.95Auth NR9VVH"
We serviced a
SAMSUNG REFRIGERATOR
Model RF30BB6600QLAA
Near Pueblo West, Colorado 81007
Domingo
Job Details:
05/13/2025
Ran hass and it has code 84c I have already replace compressor so it needs board DA94-05310k but customer decline the service as far as replacing the board everytime I run has overall check it will pass but it shows cod3 84c and compressor wont come on
We serviced a
SAMSUNG REFRIGERATOR
Model RF32CG5400SRAA
Near Colorado Springs, Colorado 80908
Mathew
Job Details:
05/13/2025
"Replace faulty motor. Test op all okay. Cx says unit has gas smell, gurgling noise from back of machine. Gurgling noise is from refrigerant returning to compressor, is normal. No gas smell found. Check sealed system components all ok. Frost pattern in strong on freezer evaporator cover indicates strong cooling system. All okay."
We serviced a
SAMSUNG REFRIGERATOR
Model RF29BB8600QLAA
Near Pueblo West, Colorado 81007
Domingo
Job Details:
05/13/2025
Educated the customer how to put an water filter in ran hass and it pass if the filter leaks it will need a filter housing DA97-23545A
We serviced a
SAMSUNG WASHER
Model WF45T6000AW/A5
Near Colorado Springs, Colorado 80927
Mathew
Job Details:
05/13/2025
Found drain obstruction. Remove obstruction. Test op. All okay.
We serviced a
SAMSUNG DRYER
Model DVE45B6300W/A3
Near Colorado Springs, Colorado 80908
Dvante
Job Details:
05/13/2025
"Checked unit, found the grinding noise coming from the right side of unit. Unit was bulging inwards. Push out the cavity of unit. Also checked under and saw it was bulging. Pushed the frame down. Replaced the motor assembly. Tested unit, no grinding noises. Unit passed HASS and operating as designed."
We serviced a
SAMSUNG MICROWAVE
Model ME17R7021ES/AA
Near Colorado Springs, Colorado 80908
Dvante
Job Details:
05/13/2025
"Checked unit, found the weird noise coming from the transformer. Checked and found the transformer losing power. Replaced transformer, capacitor, and magnetron. Had to have an electrician replace breaker. Tested unit, water is hot. No weird humming noises. Unit is operating as designed."
We serviced a
KITCHENAID RANGE
Model KSDG950ESS0
Near Colorado Springs, Colorado 80919
Jerimiah
Job Details:
05/13/2025
"Installed replacement components, upon testing unit, error code F9E0, Techline says if not miswire, replacement board is bad, cycled power and retested. Cust will try using unit to see if error code comes back, if it does please order listed below. Charged labor as quoted $229.95 CC Auth# V943NXW11100515 control board"
We serviced a
WHIRLPOOL FREEZER
Model WZF34X18DW00
Near Colorado Springs, Colorado 80924
Brandon
Job Details:
05/13/2025
"77415629390 replaced defrost sensor and tested, unit control not working, called tech support troubleshooted getting 120 volts into control not getting 120 volts out of control they said replace main control, possibly may need to just wait like longer for control to turn on, still need to collect for labor"
We serviced a
KITCHENAID DISHWASHER
Model KDTM604KPS0
Near Colorado Springs, Colorado 80927
David
Job Details:
05/13/2025
"Checked dishwasher, water in overflow pan. Dried and ran diagnostics cycle, a lot of foam in dishwasher. Cleaned out, no more foam. Running normal."
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF577KPS02
Near Colorado Springs, Colorado 80927
Aaron
Job Details:
05/13/2025
"Dual water valve is cracked, inlet valve solenoid is not allowing water to pass. Removed and replaced components, tested unit through harvest cycle, working well now, water dispenser working now as well. Advised customer of 5 star survey."
We serviced a
GE WASHER
Model GTW180SSJ0WW
Near Monument, Colorado 80132
Ryan
Job Details:
05/13/2025
Unit not agitating or spinning due to failed drive motor. Estimate for repair declined. RKS/C 149.95Auth MR99XF
We serviced a
LG FREEZER
Model LRFVS3006S
Near Colorado Springs, Colorado 80925
Mathew
Job Details:
05/13/2025
Replace freezer evaporator cover. Test op all okay.
We serviced a
LG RANGE
Model LSGL583CF.BRSELGA
Near Colorado Springs, Colorado 80904
David
Job Details:
05/13/2025
"Checked range, flame too high, adjusted flame hight. Much better"
We serviced a
LG REFRIGERATOR
Model LRFXS2503S.ASTCNA0
Near Colorado Springs, Colorado 80917
Charles
Job Details:
05/13/2025
"Replaced compressor again. Updated software, charged. Compressor running."
We serviced a
IKEA DISHWASHER
Model IDT930SAGX0
Near Colorado Springs, Colorado 80903
Ralph
Job Details:
05/13/2025
"unit has a faulty control panel and will need to be replaced, cust is going to replace the unit. AUTHO NO. HHR944"
We serviced a
GENERAL ELECTRIC WASHER-DRYER COM
Model GUV27ESSM1WW
Near Dillon, Colorado 80435
Erik
Job Details:
05/13/2025
ACCESS WITH DOOR CODEcall GE TAGcase#16609179120V at L1/ L2 until put under load - only 120V to element - need electrician to ceck line and voltage to breakerCX NOT AVAILABLE FOR SIGNATURE
We serviced a
GE RANGE
Model GRF600AV1SS
Near Carbondale, Colorado 81623
Sean
Job Details:
05/13/2025
Pulled unit out and unplugged it removed the oven door and screws for the glass top. Removed glass top and the front left burner. Installed the new burner and reassembled the unit. Plugged the unit in and tested. All burners are working good took pixThank you for letting me provide this service for you today.If you are happy with my service and care I would truly appreciate it if you could go on line and fill out a technician survey to let other people know about your experience.Thank you
We serviced a
GE DRYER
Model GFD14ESSN2WW
Near Aspen, Colorado 81611
Josh
Job Details:
05/13/2025
"Customer representative signed disclaimer. Verified MN SN POP. Customer representative is unable to find/provide necessary components. Technician replaced drum support rollers from truck stock and performed test cycle. Unit is functioning properly, within manufacturer specifications."
We serviced a
PROFILE WASHER
Model PFW955SPW0DS
Near Rifle, Colorado 81650
Josh
Job Details:
05/13/2025
"Customer signed disclaimer. Verified MN SN POP.Customer states that unit vibrates excessively. Customer reloaded problematic load, which appears to be greatly outside the capacity of this unit. Tech removed approximately 1/3 of load and performed test cycle, confirming customer concern of noise during spin start. Technician confirmed that unit is level and feet are properly adjusted, no corner rock/movement. After initiation of spin cycle, all noise was corrected by shimming the front of unit. Small tile ~1.5 floor beneath unit is flexing and allowing vibration/noise. As with last visit, technician recommends reinforcing/supporting unit with solid surface (concrete board) to eliminate the excessive flexing of floor surface currently present to correct vibration or noise during spin (esp. start)."
We serviced a
GE REFRIGERATOR/TOP
Model GFE28GYNKFS
Near Colorado Springs, Colorado 80916
Ralph
Job Details:
05/13/2025
"was having trouble getting the new filter to install in the water filter housing, fter a few tries was able to get it installed and now water is dispensing"
We serviced a
GENERAL ELECTRIC MICROWAVE OVEN
Model PEB7227AN4DD
Near Pueblo, Colorado 81001
James
Job Details:
05/13/2025
Adjusted door latch mech to address sticking button. All ops test good.
We serviced a
SAMSUNG REFRIGERATOR
Model RF24FSEDBSR/AA 09
Near Colorado Springs, Colorado 80906
Mauricio
Job Details:
05/13/2025
$139.95 CC Auth# 3PW93A Czech did not know how to turn off ice maker ice maker was filled with a block of ice due to warm air leaking in from the sealing ice maker showed Czech how to turn off and on the ice maker
We serviced a
MAYTAG DISHWASHER
Model MD8H969AWS5
Near Colorado Springs, Colorado 80919
David
Job Details:
05/13/2025
"Top sprayer not broken, just un-snapped. Put back together. All good."
We serviced a
BOSCH DISHWASHER
Model SHE53C82N
Near Colorado Springs, Colorado 80915
Mauricio
Job Details:
05/13/2025
Not at all customers fault soap dispenser would not open stayed for 2 quick washes soap dispenser was stuck from factory was able to get it open and started dispensing the soap ran a third cycle and soap dispensed properly unit tested to spec after quick repair of the soap dispenser
We serviced a
BOSCH REFRIGERATOR
Model b36cd50sns/08
Near Colorado Springs, Colorado 80904
David
Job Details:
05/13/2025
"Checked refrigerator, refrigerant diverter valves buzzing, called tech line, and he sent me a pdf of the problem and the repair. Has not made the noise for a while. Cx to keep an eye on it."
We serviced a
BOSCH DISHWASHER
Model SHP78CM4N
Near Cañon City, Colorado 81212
Domingo
Job Details:
05/13/2025
Install new part but still did the same Call tech line and they told me this one doesnt have the light at the bottom ask them to see if in the app he said maybe. Try the app and see if it tell her how many min it has but thats the way it works
We serviced a
BOSCH REFRIGERATOR
Model B36FD50SNS/04
Near Carbondale, Colorado 81623
Sean
Job Details:
05/13/2025
"Opened the IM door and removed the ice tray .Unplugged the unit and removed the dispenser cover , screws and the dispenser flapper. Cleaned the inside service for good seal. Installed the new flapped assembly and reassembled the unit Opened the door and removed the inside dispenser seal.Installed the new one and put the ice tray back into place.Plugged the unit in and tested. All functions are working as designed by the factoryThank you for using D-3 Appliance.If you are satisfied with the service I have provided than please go on line and fill out a technician survey and let other people know about you positive experience.Thank you Sean B"
We serviced a
WHIRLPOOL DRYER ELECTRIC
Model WED8127LC2
Near Redmond, Oregon 97756
Richard
Job Details:
05/13/2025
"Installed new control, harness and sensors cycle tested unit all tested good at this time"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ18
Near Colorado Springs, Colorado 80923
Aaron
Job Details:
05/13/2025
"Ice maker has power, not going into harvest cycle removed and replaced ice maker assembly, needs time to cool. Advised customer of situation and survey."