Service History 214 - D3 Appliance

We serviced a

MAYTAG WASHER

Model MVWC565FW2

Near Rocky Ford, CO 81067

James

Job Details: 05/11/2023

Advised survey::Installed preorder parts. Tested ops all ckok. Advised cust on proper loading and sorting and balanced unit. Left litmus (see sd pics)

We serviced a

SAMSUNG WASHER

Model WA45T3200AW/A4

Near Colorado Springs, CO 80919

Jeremy

Job Details: 05/11/2023

Ran HASS. Installed new parts. Ran unit and everything is working. Asked CX to complete the survey. No leaks. Placed leak detection strip under unit.

We serviced a

MAYTAG DRYER

Model MED7000AG0

Near Colorado Springs, CO 80907

Jeremy

Job Details: 05/11/2023

"Installed dryer. Hooked up steam water hose. Had to run to store to pick up vent and power cord, payed for by CX. Service Charge $129.95 Labor $99.95 Total $229.90 Payed via check Auth: 399YX3"

We serviced a

WHIRLPOOL RANGE

Model WFE550S0HZ1

Near Colorado Springs, CO 80920

Glenn

Job Details: 05/11/2023

"Customer reports burning smell from behind oven, Found wire burnt on back. Confirmed Red L2 Harness wires melted off terminal block. Power cord still in good shape, all connections tight, except where missing L2 wires melted. Suggest replace following parts: Main Harness: W11616882 $148.20 , Terminal Block: WPW10245259 $69.02 , Tax $17.81 , MPS $14.50 , Labor $184.95, Declined Estimate for now. Left Unit Unplugged & Breaker turned off for safety.SR #7736393427"

We serviced a

MAYTAG WASHER

Model MVW7232HW0

Near Rio Rancho, NM 87144

Joseph

Job Details: 05/11/2023

Unit not turning on. Inspect unit. Found that the connection going to the main control from the console was not secured. Secured connection. Ran calibration cycle. Unit tested good. Unit is good to go.

We serviced a

MAYTAG DRYER - ELECTRIC

Model MED7230HW2

Near Colorado Springs, CO 80920

Glenn

Job Details: 05/11/2023

"Long Dry Times. Reseat Connections. All OPS Test:OK, Suggest have vent system cleaned once per year."

We serviced a

MAYTAG WASHER

Model MVW5430MW0

Near Colorado Springs, CO 80920

Glenn

Job Details: 05/11/2023

washer not getting hot water. source is good.Hoses installed correctly. Reseated connections to valve assy and PCB. Found unit is alternating btwn hot & cold. Unit is operating as designed. SR#7736390629

We serviced a

MAYTAG RANGE

Model MGR6600FZ2

Near Rio Rancho, NM 87144

Joseph

Job Details: 05/11/2023

Installed parts listed. Unit tested good. Unit is good to go.

We serviced a

WHIRLPOOL RANGE

Model WFG320MOMS0

Near Albuquerque, NM 87106

Larry

Job Details: 05/11/2023

CX complaint - Burner not lighting - Inspected unit and found ignitor grounding to chasis - Secured wire and tested good - Unit is good to go

We serviced a

WHIRLPOOL RANGE

Model JDR8895AAS

Near Santa Fe, NM 87508

Jason

Job Details: 05/11/2023

checked temps in both ovens both temps check ok$140.02 CK Auth# TT9V3C

We serviced a

WHIRLPOOL FREEZER

Model KRFF507HBS03

Near Colorado Springs, CO 80908

Kris

Job Details: 05/11/2023

installed all parts sent ran test op all ok unit is working to spec at this time.

We serviced a

WHIRLPOOL WASHER

Model WFW92HEFW0

Near Santa Fe, NM 87506

Jason

Job Details: 05/11/2023

installed control unit checks ok

We serviced a

BLUESTAR RANGE

Model RND486CBSS

Near Elbert, CO 80106

Kris

Job Details: 05/11/2023

ran test op installed new ignitor. ALL ok unit need gas valve for oven. cx is going to replace gas valve

We serviced a

KITCHENAID RANGE

Model KSGG700ESS2

Near Colorado Springs, CO 80923

Aaron

Job Details: 05/11/2023

"Removed and replaced dual valve, tested and burner levels are transitioning well, knob still will not go to L, called techline and the burner has it's own part number SR7736394415, knob for front left burner was on back right burner, was either manufactured like this or the knobs were swapped at some point, corrected issue and tested, all burners are working well now. Total due was previously paid."

We serviced a

WHIRLPOOL COOKTOP

Model WCG97US6HS00

Near Colorado Springs, CO 80908

Aaron

Job Details: 05/11/2023

"Left front and rear burners are unable to achieve low flame levels, replaced valves and tested, working well now. Advised customer of survey."

We serviced a

SPEEDQUEEN DRYER

Model ADEE9RGS175TW01

Near Elbert, CO 80106

Kris

Job Details: 05/11/2023

ran test op found belt fell off. adjusted all okm unit is working to spec at this time.

We serviced a

WHIRLPOOL REFRIGERATOR

Model KSCS23INSS01

Near Santa Fe, NM 87501

Jason

Job Details: 05/11/2023

checked unit found condensor blocked and items in front of sensor moved items cx to moniterAuth code:R49X9F$140.02

We serviced a

BEKO MICROWAVE

Model MWOTR30200CSS

Near Colorado Springs, CO 80919

Jessie

Job Details: 05/11/2023

"panel was falling off, now good to go. mount looks good, all tests well."

We serviced a

ELECTROLUX VENT HOODS

Model RH30WC60GS

Near Colorado Springs, CO 80921

Jessie

Job Details: 05/11/2023

"replaced blower motor. test op, all okay."

We serviced a

BEKO FREEZER

Model BUFR2715MG

Near Peyton, CO 80831

Kris

Job Details: 05/11/2023

reveresed door ran test op all ok unit is working to spec at this time.

We serviced a

GE DISHWASHER

Model GDT535PSMBSS

Near Woodland Park, CO 80863

Ralph

Job Details: 05/11/2023

installed parts and unit checked okay

We serviced a

WHIRLPOOL DISHWASHER

Model JDB1250AWP

Near Santa Fe, NM 87508

Jason

Job Details: 05/11/2023

checked unit could not verify if link suports are broken unit has trim nailed and grouted in place can not get to unit to diagnose or fix

We serviced a

MAYTAG DRYER

Model MED7230HW2

Near Colorado Springs, CO 80908

Aaron

Job Details: 05/11/2023

"Rollers and idler wheel are making noise, blower wheel is stripped on motor shaft and rattling in housing, replaced parts and lubricated, cleared unit of lint. Tested and working well now. Advised customer of 5 star survey"

We serviced a

KITCHENAID DISHWASHER

Model KDTE204KPS1

Near Carbondale, CO 81623

James R

Job Details: 05/11/2023

Checked for error codes none. Slide unit out. Run unit on a normal wash. So could inspect all the way around unit. Found rail screws loose. Leaking. Tightened. Ok.Removed water catch tray as well so can see under unit. It is dry. Could find no other leaks. All foam under door dry. No water dripping out of rubber hoses in front on either side. Removed outer door panel so can see btm door seal all dry there as well. Op's normal. Reinstalled unit. Customer signed waivers. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

MAYTAG WASHER

Model MVW7230HW1

Near Colorado Springs, CO 80908

Aaron

Job Details: 05/11/2023

"Rotor bolt not fully secure, rotor rattling in agitation and spin cycles, corrected and tested unit, working well now. Advised customer of 5 star survey"

We serviced a

KITCHENAID DISHWASHER

Model KDTM604KPS

Near Colorado Springs, CO 80908

Aaron

Job Details: 05/11/2023

"F9E1 drain error code, upon inspection found excessive debris in the sump and pump, pump is shorted out, replaced pump and cleared debris, tested unit and draining well now. Advised customer of usage and survey."

We serviced a

WHIRLPOOL REFRIGERATOR

Model GS6SHAXMQ00

Near Colorado Springs, CO 80917

Aaron

Job Details: 05/11/2023

"Compressor is overamping, unable to start unit, needs compressor, unit manufactured Sept 2003. Compressor R134A w10309994$528.49Tax $43.34Supplies $14.50Coolant $255.00Hc $129.95Labor 4 hrs $695.95Total job $1,667.23No return on parts30 day estimateAuth 129.95 hc #9K4CUT"

We serviced a

GE DISHWASHER

Model GHDT168V60SS

Near Colorado Springs, CO 80906

Brandon

Job Details: 05/11/2023

"Bad board not sending voltage to water valve Labor $149.95 mps $14.50 tax $6.81 Control assy wd27x10322 discontinued, water valve Wd15x10014 $83.10. cx declined repair buying another unitPaid svf $129.95 Auth# W933JX"

We serviced a

SAMSUNG DRYER ELECTRIC

Model DV350AER XAA03

Near Colorado Springs, CO 80906

Brandon

Job Details: 05/11/2023

"Idler needed adjusted and cleaned all rollers, tested op with load and without no squeaking now all ok"

We serviced a

GE DISHWASHER

Model 665.13039K114

Near Colorado Springs, CO 80906

Brandon

Job Details: 05/11/2023

"Diverter motor are bad not divertering water to spray arms and control isn't se.ding voltage to wash pump after 30 seconds. Cx declined repair at this time.w10595569 $295.97 ctrl, w10537869 diverter $89.19 pump mtr wpw10510667 $144.64, labor $189.95 mps $14.50 tax $43.44Svf paid $129.95 Auth# RV4LN9"

We serviced a

SAMSUNG VENT HOODS

Model MRV3615M

Near Colorado Springs, CO 80906

Brandon

Job Details: 05/11/2023

"Called cx to inform them that we are not able to service the damaged panel, told cx to contact installers because felt was not installed on front side where panel was scratch by metal on metal contact"

We serviced a

WOLF OVEN

Model do3050pe/s/ph

Near Monument, CO 80132

Jerimiah

Job Details: 05/11/2023

"Unit getting 4910, and 6030. Component activation has upper cooling registering 0rpm while lower is @2900. Ran self test and again failed with 4910. Per techline modified pins on upper fan for better connection. Tested several times, component activation is registering. Self test good unit check ok.827048 wire harness 826963 upper fan"

We serviced a

WHIRLPOOL DRYER

Model LSE7806ACE

Near Carbondale, CO 81623

James R

Job Details: 05/11/2023

Tore apart cleaned. Replaced belt and blower. Reassembled. Test run unit. Good. Customer paid $149.95 labor auth code H4V4N9Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

MAYTAG WASHER

Model MHW4200BG0

Near Colorado Springs, CO 80907

Jeremy

Job Details: 05/11/2023

Installed washer. Double checked for leaks and placed leak detection under unit. Switched up the service fees. Other ticket I charged $129.95 Service charge $89.95 Auth: YM493W

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF555SDFZ16

Near Colorado Springs, CO 80915

Jeremy

Job Details: 05/11/2023

Installed all parts. Evap fan is quite. Ice chute door no longer leaking. Placed leak strip under unit. Asked CX to complete the survey.

We serviced a

FRIGIDAIRE ELECTRIC RANGE

Model K60540543A

Near Palmer Lake, CO 80133

Jerimiah

Job Details: 05/11/2023

"Unit not heating, system missing line2 red power. Instructed Cust must have electrician service outlet junction box and circu8t breaker to have dedicated breaker for unit. Must be min dbl 40amp. Closing call."

We serviced a

WOLF RANGE

Model GR364G-LP

Near Colorado Springs, CO 80920

Jerimiah

Job Details: 05/11/2023

"Nothing working on unit, per model number unit is set up as propane, unit is couple weeks old, never worked from the beginning. Unit is also scratched, griddle cover, bullnose, door, and kickplate. Techline is aware of situation and has documentation. Techline suggests to go back to seller for getting resolution. Part number is solely for notes for kit converting unit back to natural gas. 821203 NG conversion kit"

We serviced a

GENERAL ELECTRIC RANGE - GAS

Model JGB660SP1SS

Near Colorado Springs, CO 80910

Jerimiah

Job Details: 05/11/2023

"Unit burning fuel too poorly, flames blowing away from bake pipe. Adjusted shutter closed. Unit check ok."

We serviced a

WHIRLPOOL M/W OTR

Model WMH31017HZ08

Near Colorado Springs, CO 80915

Jerimiah

Job Details: 05/11/2023

"Unit would run for short period of time then cut off as though it were in power mode or defrost. Replaced all components. Unit check ok, disclosed survey to cust 5star FCC."

We serviced a

WHIRLPOOL WASHER

Model MVW6230HW0

Near Colorado Springs, CO 80916

Carlos

Job Details: 05/11/2023

Installed listed parts. Ran test op. All ok. Left leak strip

We serviced a

MAYTAG WASHER

Model MHW5500FW1

Near Colorado Springs, CO 80909

Carlos

Job Details: 05/11/2023

Installed listed parts. Runs all ok. Customer paid labor $189.95 CC Auth# 9X3LKC

We serviced a

WHIRLPOOL DISHWASHER

Model WDTA50SAKZ1

Near Colorado Springs, CO 80910

Carlos

Job Details: 05/11/2023

Installed listed parts. Ran test op all ok. Left leak strip.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF954CIHZ00

Near Albuquerque, NM 87114

Joseph

Job Details: 05/11/2023

Installed parts listed. Also unit was not cooling properly. Inspect unit. Compressor was not over heating but the condenser was. The vent at the condenser was blocked by debris and so was the condenser. Cleaned condenser and the back panel. Let customer know it will take 24 hours for cooling. No further issues.

We serviced a

WHIRLPOOL WASHER

Model WTW5010LW0

Near Albuquerque, NM 87109

Larry

Job Details: 05/11/2023

Installed suspension and tested good - Unit is good to go

We serviced a

WHIRLPOOL WASHER

Model WTW5057LW0

Near Albuquerque, NM 87113

Larry

Job Details: 05/11/2023

Installed parts listed and tested good - Unit is good to go

We serviced a

WHIRLPOOL WALLOVEN

Model WOS51EC0HS20

Near Los Lunas, NM 87031

Larry

Job Details: 05/11/2023

CX complaint - Oven trips breaker when started - Inspected unit and found burtn wire on harness - Repaired harness and tested goold - Unit is good to go

We serviced a

SAMSUNG REFRIGERATOR

Model RS27T5200SR/AA

Near Colorado Springs, CO 80927

Amos

Job Details: 05/11/2023

Replaced all listed parts on the unit. Tested the unit and it it working perfect.

We serviced a

GE DRYER

Model GTD42EASJ2WW

Near Frisco, CO 80443

Erik

Job Details: 05/10/2023

install/test: GOODJOB COMPLETE

We serviced a

JENNAIR WALLOVEN

Model JMW3430IM02

Near Albuquerque, NM 87104

Larry

Job Details: 05/10/2023

Got Parts?

We serviced a

AMANA REFRIGERATOR

Model ASI2175GRS07

Near Albuquerque, NM 87121

Joseph

Job Details: 05/10/2023

Installed parts listed. Unit tested good. Unit is good to go. Let customer know to wait 24 hours for cooling.

We serviced a

WHIRLPOOL DRYER

Model MED5630HC1

Near Edwards, CO 81632

Antonio

Job Details: 05/10/2023

found kinked vent behind dryer pulled unit out cleanred also shortened up vent hose SC$149.00LR$149.00$298.00AUTH#EX934V

We serviced a

GE WASHER

Model PTW700BPT0DG

Near Avon, CO 81620

Erik

Job Details: 05/10/2023

install/test: GOODJOB COMPLETE

We serviced a

MAYTAG DRYER

Model MED7230HW2

Near Albuquerque, NM 87114

Joseph

Job Details: 05/10/2023

Unit making noise. Inspect unit. Adjusted wire harness. Unit tested good. Unit is good to go.

We serviced a

WHIRLPOOL DISHWASHER

Model KUDS230BAL0

Near Albuquerque, NM 87120

Larry

Job Details: 05/10/2023

CX complaint - DW not draining - Inspected unit and found the timer failed - Parts are NLA - Collected $140.18-auth-9MP3VE

We serviced a

WHIRLPOOL DRYER

Model WGD8127LC3

Near Rio Rancho, NM 87124

Joseph

Job Details: 05/10/2023

Installed parts listed. Unit tested good. Unit is good to go.

We serviced a

KITCHENAID REFRIGERATOR

Model KBSD608ESS01

Near Avon, CO 81620

Antonio

Job Details: 05/10/2023

installed new led board unit tested good

We serviced a

WHIRLPOOL WALLOVEN

Model WOS72EC0HS20

Near Rio Rancho, NM 87144

Joseph

Job Details: 05/10/2023

Installed parts listed. Unit tested good. Unit is good to go.

We serviced a

BOSCH DISHWASHER

Model SHP65T55UC/07

Near Edwards, CO 81632

Erik

Job Details: 05/10/2023

install/test: GOODJOB COMPLETE

We serviced a

GENERAL ELECTRIC WASHER-DRYER COM

Model GUD24ESSMWW

Near Pueblo, CO 81008

Amos

Job Details: 05/10/2023

Replaced all listed parts on unit. Unit is good to go.

We serviced a

MAYTAG WASHER TOP LOAD

Model MVW6500MBK0

Near Parachute, CO 81635

James R

Job Details: 05/10/2023

Test faulty water valve does have pwr going to valve but doesnt let cold water in. Replaced water valve test again cold and hot operation is normal. Customer signed waiver for water. Test in diagnostics no error codes. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

GENERAL ELECTRIC WASHER

Model GFW550SSN3WW

Near Pueblo, CO 81008

Amos

Job Details: 05/10/2023

Replaced all listed parts. Washing machine door works fine.

We serviced a

KITCHENAID DISHWASHER

Model KDFE204KPS0

Near Pueblo, CO 81001

James

Job Details: 05/10/2023

"Found loose wire at heater causing poor drying. Also advised cust they have to use rinse aid. Tested all ops, all ckok. Cust is expecting unit to be completely dry."

We serviced a

WHIRLPOOL RANGE

Model WGG745S0FS02

Near Los Lunas, NM 87031

Larry

Job Details: 05/10/2023

Installed membrane and tested good - Unit is good to go

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF767SDHZ03

Near Grand Junction, CO 81503

James R

Job Details: 05/10/2023

"Evac system Replaced compressor,drier and valves. Evac again let set no apparent leaks. Recharge system 56 g 600 starting to cool. compressor amps .95 Operation good. Please fill out whirlpool tech satisfaction survey. Thank You."

We serviced a

GE REFRIGERATOR

Model GYE22KSHDSS

Near Colorado Springs, CO 80923

Jessie

Job Details: 05/10/2023

#NAME?

We serviced a

AMANA WASHER

Model NTW4516FW4

Near Colorado Springs, CO 80903

Amos

Job Details: 05/10/2023

Ran test opp. Replaced part on unit. Unit is filling up normal.

We serviced a

FRIGIDAIRE DISHWASHER

Model FGID2466QF6A

Near Colorado Springs, CO 80923

Jessie

Job Details: 05/10/2023

"Found knockout plug was still in garbage disposal that property owner installed. removed knockout and tested unit, found no leaks. tests well. put leak strip down for customer to moniter. did a vinegar bath."

We serviced a

U-LINE BAR FRIDGE

Model U-2075RFB-00

Near Colorado Springs, CO 80920

Jessie

Job Details: 05/10/2023

"- unit has a sealed system leakevap#80-54275-00 $193.22drier#wpW10143759 $61.53total parts $254.75tax $20.89sc $149.95$14.50labor $795.95refrigerant $255total $1,491.03- customer will think about repair"

We serviced a

GE DRYER

Model GTDP740ED1WW

Near Gypsum, CO 81637

Erik

Job Details: 05/10/2023

install/test: GOODJOB COMPLETE

We serviced a

MONOGRAM REFRIGERATOR

Model ZIDI240HCII

Near Avon, CO 81620

Erik

Job Details: 05/10/2023

install and adjust door panel

We serviced a

SUBZERO REFRIGERATOR

Model IC-36R-LH

Near Colorado Springs, CO 80921

Jessie

Job Details: 05/10/2023

"customer was worried about fridge gasket. i exlpained the break in of the gasket, saw dirt and cleaned gasket. door closes and suctions well."

We serviced a

AMANA WASHER

Model NTW4516FW3

Near Albuquerque, NM 87112

Jason

Job Details: 05/10/2023

installed parts listed and ran a calibration cycle unit checks ok

We serviced a

WHIRLPOOL DISHWASHER

Model WDT750SAKZ1

Near Peyton, CO 80831

Aaron

Job Details: 05/10/2023

"Inspected unit, gasket replaced, tested unit and no leaks, customer mentioned hose from the inlet valve to fill assembly had come off and leaked water all over floor, verified clamp is on and secure, leak would not have been detected by flood switch, verified that switch is operating, no further leaks at time of inspection. Advised customer of 5 star survey."

We serviced a

WHIRLPOOL DRYER

Model WED6605MC0

Near Peyton, CO 80831

Aaron

Job Details: 05/10/2023

"Dent on left side of top panel, replaced panel, no dents, unit is working and heating well. Advised customer of 5 star survey"

We serviced a

WHIRLPOOL WASHER

Model WTW8127LW0

Near Peyton, CO 80831

Aaron

Job Details: 05/10/2023

"Hole in inner tub, removed and replaced basket, working well now. Advised of 5 star survey."

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF535SWHZ07

Near Colorado Springs, CO 80923

Aaron

Job Details: 05/10/2023

"Unit not properly leveled, corrected and verified level unit, tightened door hinges as wel, working well now. Advised of 5 star survey."

We serviced a

ELECTROLUX DRYER

Model EFME517STT0

Near Colorado Springs, CO 80916

Kris

Job Details: 05/10/2023

installed motor ran test op on timed dry for 30 min no issues.

We serviced a

WHIRLPOOL REFRIGERATOR

Model KBRC36FTS06

Near Albuquerque, NM 87111

Jason

Job Details: 05/10/2023

checked unit found clogged defrost drain also a drawer in the freezer section was interfearing with door closing properly corrected issues unit checks okAuth code:9394NE$140.02

We serviced a

JENNAIR RANGE

Model JDRP436HL01

Near Colorado Springs, CO 80921

Glenn

Job Details: 05/10/2023

"Adjust & Clean RF & LF Burner Head Assys, All OPS Test:OK"

We serviced a

MAYTAG WASHER

Model A412A

Near Pueblo, CO 81004

James

Job Details: 05/10/2023

Installed ordered parts all ops test good left litmus (see sd pics)

We serviced a

JENNAIR REFRIGERATOR

Model JFFCC72EHL03

Near Colorado Springs, CO 80921

Glenn

Job Details: 05/10/2023

Install New Door Gaskets & Adjust Gaskets.All OPS Test:OK

We serviced a

KITCHENAID REFRIGERATOR

Model KRSC503EBS01

Near Colorado Springs, CO 80921

Glenn

Job Details: 05/10/2023

Swap out upper freezer drawer. All OPS Test:OK

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRX986SIHV00

Near Albuquerque, NM 87123

Jason

Job Details: 05/10/2023

installed inlet valve unit opperation checks ok

We serviced a

KITCHENAID REFRIGERATOR

Model KRFC704FPS05

Near Colorado Springs, CO 80921

Glenn

Job Details: 05/10/2023

"Actual arrival time 11:40amUI & Dispenser Not working, UI Not responding. Cycled Power & Reset connections. All OPS Test:OK"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS335SDHM06

Near Colorado Springs, CO 80921

Aaron

Job Details: 05/10/2023

"Replaced control, harness and ice maker, put ice maker into harvest cycle and working well, defrosted unit. Working well now. Vacant property so unable to obtain signature or advise of survey."

We serviced a

VIKING REFRIGERATOR

Model VCSB423DSS

Near Monument, CO 80132

Kris

Job Details: 05/10/2023

installed valve unalble to verify unit was in working ordet cx still owes labor

We serviced a

MAYTAG DRYER

Model MED7230HW2

Near Albuquerque, NM 87123

Jason

Job Details: 05/10/2023

installed console unit opperation checks ok

We serviced a

WHIRLPOOL WASHER

Model WTW5057LW0

Near Edgewood, NM 87015

Jason

Job Details: 05/10/2023

installed cam and actuator unit checks ok

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF757SDHZ00

Near Colorado Springs, CO 80920

Kris

Job Details: 05/10/2023

installed fan made sure door seal is seated correctly all ok cx will monitor unit.

We serviced a

WHIRLPOOL RANGE

Model WCG97US6HS00

Near Colorado Springs, CO 80921

Glenn

Job Details: 05/10/2023

"RR Burner not igniting. All others still working.Found RR Switch loose and not snapped into correct position anymore. Re-position switch and clipped in place. All OPS Test:OK. If problem returns, suggest replace switch assy again."

We serviced a

SAMSUNG DISHWASHER

Model DW80R2031US/AA

Near Colorado Springs, CO 80920

Jeremy

Job Details: 05/10/2023

Unit came with new build. Move in date 4/01/23 Not HASS Compatiable.. Installed all new parts and unit is working correctly. Double checked for leaks and placed leak detection strip under unit. Asked Cx to complete survey.

We serviced a

SAMSUNG WASHER

Model WA52A5500AC/US

Near Fountain, CO 80817

Jonny

Job Details: 05/10/2023

"Installed parts, hass passed, custy is happy"

We serviced a

SAMSUNG REFRIGERATOR

Model RF27T5201SR/AA

Near Colorado Springs, CO 80916

Jonny

Job Details: 05/10/2023

"Noticed that the fridge is over congested, I took a pic to show . The vents and airflow is blocked with food in the fridge and freezer. No parts needed, gave custy fridg3 education"

We serviced a

WHIRLPOOL DISHWASHER

Model WDTA50SAKZ1

Near Los Lunas, NM 87031

Larry

Job Details: 05/10/2023

CX complaint - F8E4 on display - Inspected unit and found the floatswitch harness loose - Secured connection and tested good - Unit is good to go

We serviced a

GE FREEZER

Model FUF21SVGRWW

Near Colorado Springs, CO 80906

Ralph

Job Details: 05/10/2023

"UNIT RUNNIING CORRECTLY, CUST TO MONITOR...AUTHO NO. E9FT3M"

We serviced a

SUB ZERO REFRIGERATOR

Model n/a

Near Colorado Springs, CO 80906

Ralph

Job Details: 05/10/2023

INSTALLED PART AND UNIT CHECKED OKAY

We serviced a

SUBZERO REFRIGERATOR

Model BI42SD/S/PH42

Near Colorado Springs, CO 80904

Ralph

Job Details: 05/10/2023

"INSTALLED LISTED PARTS, AND UNIT CHECKED OKAY"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS335SDHM06

Near Colorado Springs, CO 80921

Glenn

Job Details: 05/10/2023

"Frost buildup on Frzr Evap Cover.Techline: Diag Test, Open Thermistor. Defrost icebuild up, verified thermistor was plugged in, Was reading resistance. Checked at 2 pink wires on PCB, does read properly. Diag Mode > Thermistor now passing? Possible loose connection due to ice buildup? All OPS Test:OK at this time. If problem returns, suggest replace thermistor & Main PCB.Thermistor P/N: W10384183 , PCB P/N: W11558182 , SR# 7736370353Thermistor should read 8.75 k ohms in Icewater"

We serviced a

GENERAL ELECTRIC WASHER

Model GTW465ASN1WW

Near Colorado Springs, CO 80904

Jessie

Job Details: 05/10/2023

"replaced shifter, belt and gc. tested unit, all okay, left leak strip."

We serviced a

SAMSUNG WASHER

Model WF45T6000AW/A5

Near Colorado Springs, CO 80916

Jeremy

Job Details: 05/10/2023

All parts installed. Unit is now working. Double checked for leaks. Placed leak detection strip under unit. Asked CX to compplete the survey.