Service History 22 - D3 Appliance

We serviced a

SUB ZERO BI REFRIGERATOR

Model BI-42SID/S/TH

Near Colorado Springs, CO 80906

Ralph

Job Details: 03/03/2025

"installed part and unit checked okay, cust believes that units inverter is under warranty, cust twill call d3 if it is"

We serviced a

SAMSUNG DISHWASHER

Model DW80CG4021SRAA

Near Colorado Springs, CO 80916

Brandon

Job Details: 03/03/2025

"Leaking water valve, replace water valve tested operation all ok"

We serviced a

SAMSUNG REFRIGERATOR

Model RF23R6201SR/AA

Near Colorado Springs, CO 80908

Dvante

Job Details: 03/03/2025

"Checked unit, found the ice maker had built up ice. Went ahead and replaced, ice maker, main pcb, auger motor, and ice tray. Tested unit, passed HASS. Unit is operating as designed."

We serviced a

SAMSUNG REFRIGERATOR

Model RF32CG5300SRAA

Near Colorado Springs, CO 80909

Brandon

Job Details: 03/03/2025

"Loose connections at condenser fan, hass oqc passed"

We serviced a

BLUESTAR RANGE

Model BSP48

Near Colorado Springs, CO 80921

Ralph

Job Details: 03/03/2025

installed lisyed part and unit checked okay

We serviced a

MAYTAG DRYER

Model MEDC465HW0

Near Albuquerque, NM 87105

Larry

Job Details: 03/03/2025

CX complaint - Dryer not stopping - Inspected unit and found the timer and control failed - Replaced with pre-id parts and tested good - Unit is good to go - Survey mentioned

We serviced a

WHIRLPOOL WASHER

Model WTW5000DW3

Near Albuquerque, NM 87107

Larry

Job Details: 03/03/2025

CX complaint - Rattling noise when washing - Inspected unit and found the agitator loose - Secured with loctite and tested good - Unit is operating as designed - Survey mentioned

We serviced a

BOSCH DISHWASHER

Model SHXM78W55N/01

Near Colorado Springs, CO 80919

Charles

Job Details: 03/03/2025

"E15 leak error, infestation of mice chewing everything, leaking from sump assembly and motor. Can not see extent of damage. Would have to separate tub from base. Not worth repair. Service hanger $159.95 paid autho U939WL"

We serviced a

BOSCH DISHWASHER

Model SHXM78W55N/01

Near Colorado Springs, CO 80919

Charles

Job Details: 03/03/2025

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF757SDHZ00

Near Colorado Springs, CO 80920

Dvante

Job Details: 03/03/2025

Replaced led module kit. The lights inside fridge and freezer section now working. Unit is operating as designed. Customer paid labor.SR7741062429$189.95 CC Auth# PC4VT4

We serviced a

WHIRLPOOL DRYER

Model WED6150PB0

Near Albuquerque, NM 87110

Jason

Job Details: 03/03/2025

Installed repair kit ran timed dry cycle unit opperation checks ok. spoke to cx about review

We serviced a

KITCHENAID DISHWASHER

Model KDFE204KPS3

Near Rio Rancho, NM 87144

Antonio

Job Details: 03/03/2025

"cx complaint - beeping,light and clean flashes - went into servivematters,then put unit into diagnostic mode (passed) - survey mentioned6"

We serviced a

WHIRLPOOL WASHER

Model WTW5057LW1

Near Albuquerque, NM 87120

Larry

Job Details: 03/03/2025

Cx complain t - Long cycles - CX instruct - Explained proper use and care - Unit is operating as designed - Survey mentioned

We serviced a

WHIRLPOOL WASHER

Model WTW5010LW0

Near Albuquerque, NM 87108

Jason

Job Details: 03/03/2025

Checked unit found broken wire to drain pump repaired wire and re routed. ran quick was cycle to test function. unit opperation checks ok. spoke to cx about review

We serviced a

WHIRLPOOL DISHWASHER

Model WDT531HAPM0

Near Rio Rancho, NM 87124

Antonio

Job Details: 03/03/2025

cx complaint - dishes are always still wet - box has been picked up

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS588FIHZ06

Near Albuquerque, NM 87114

Larry

Job Details: 03/03/2025

Installed parts listed and tested good - Unit is good to go - Survey mentioned

We serviced a

KITCHENAID DISHWASHER

Model KDFE204KPS2

Near Albuquerque, NM 87120

Larry

Job Details: 03/03/2025

CX complaint - DW dripping - Inspeccted unit and found the tub gasket misaligned - Adjusted gasket and tested good - Unit is good to go - Survey mentioned

We serviced a

MAYTAG DRYER

Model MED7230HC3

Near Los Ranchos de Albuquerque, NM 87107

Larry

Job Details: 03/03/2025

CX making loud scraping noise - Inspected unit and found the blower wheel and rollers failed - Replaced with pre-id parts and tested good - Unit is good to go - Survey mentioned

We serviced a

WHIRLPOOL DISHWASHER

Model WDT750SAKZ3

Near Rio Rancho, NM 87144

Antonio

Job Details: 03/03/2025

cx complaint - dispenser lid will not open - replace soap dispenser - unit is working properly - survey mentioned

We serviced a

WHIRLPOOL RANGE

Model WFG515S0MS1

Near Monument, CO 80132

Dvante

Job Details: 03/03/2025

"Checked unit, found the strong gas smell coming from the loose gas hose. Had tighten the gas hose properly. Turned unit back on and only smell a little bit of gas when preheating which is normal. No strong gas smell. Unit is operating as designed. No parts needed.SR7741035649"

We serviced a

KITCHENAID RANGE

Model KSEG950ESS2

Near Pueblo West, CO 81007

James

Job Details: 03/03/2025

Installed ordered parts. Tested ops all ckok

We serviced a

MAYTAG DRYER

Model MEDX655DW1

Near Pueblo, CO 81001

James

Job Details: 03/03/2025

"Installed ordered part, tested ops all ckok"

We serviced a

MAYTAG WASHER

Model MVWB765FW3

Near Colorado Springs, CO 80910

Carlos

Job Details: 03/03/2025

Installed suspension & calibration cycle all ok

We serviced a

WHIRLPOOL DISHWASHER

Model MDB4949SKZ1

Near Colorado Springs, CO 80904

Carlos

Job Details: 03/03/2025

Installed water valve ran test runs all ok

We serviced a

WHIRLPOOL WASHER

Model WFW5605MW1

Near Edwards, CO 81632

Antonio

Job Details: 03/03/2025

"Installed new dispenser housing, then ran a cycle for proper operation and unit tested good. Also advised cx of whlp survey"

We serviced a

MAYTAG DRYER

Model MED5630HW2

Near Gypsum, CO 81637

Antonio

Job Details: 03/03/2025

Installed new element ran a cycle for proper operation and unit tested good Also advised cx of whlp survey

We serviced a

MAYTAG WASHER

Model MVW4505MW1

Near Grand Junction, CO 81504

Sean

Job Details: 03/03/2025

Checked the unit MN SN POP Customer signed disclaimer.Opened unit unplugged and removed the control and top panel. Removed front right spring and rod set with boot and ball joint. Replaced with new. Repeated steps for all springs and rods.Reassembled the unit and tested.Ran the unit on a quick wash cycle to fill up .Watched unit run through a agitate and spin cycle unit not hitting or banging. Unit tested good.checked unit level good.Please fill out a technician survey. Thank you.

We serviced a

MAYTAG WASHER

Model MVW5430MW1

Near Colorado Springs, CO 80925

Carlos

Job Details: 03/03/2025

Installed harness all ok

We serviced a

WHIRLPOOL DRYER

Model WED560LHW2

Near Colorado Springs, CO 80903

Carlos

Job Details: 03/03/2025

Installed control board runs all ok

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRQA59CNKZ00

Near Colorado Springs, CO 80938

Aaron

Job Details: 03/03/2025

"Removed and replaced sensor and UI control, tested door operation, working and responding well. Advised customer of 5 star survey."

We serviced a

WHIRLPOOL DRYER

Model WED5010LW1

Near Monument, CO 80132

Dvante

Job Details: 03/03/2025

"Checked unit, started the cycle. Nothing is tripping the breaker. Checked the wiring from the power cord and its wired properly. Customer had an electrician replace the gfci breaker. Customer also said the unit hasnt tripped in 3 days. Checked for error codes, none on display. Unit is working as designed."

We serviced a

MAYTAG WASHER

Model MVW4505MW1

Near Colorado Springs, CO 80922

Aaron

Job Details: 03/03/2025

"Capacitor shorted, break in lower harness between control and drain pump, removed and replaced components, tested unit through diagnostics, working well now. Advised customer of 5 star survey."

We serviced a

WHIRLPOOL WALL OVEN

Model WOEC5030LZ00

Near Colorado Springs, CO 80908

Aaron

Job Details: 03/03/2025

"Removed and replaced components, tested unit, working and heating well now. Advised customer of 5 star survey"

We serviced a

KITCHENAID REFRIGERATOR

Model KRSC703HPS05

Near Colorado Springs, CO 80904

Carlos

Job Details: 03/03/2025

Installed fan runs ok

We serviced a

WHIRLPOOL WASHER

Model WFW5605MW1

Near Colorado Springs, CO 80906

Carlos

Job Details: 03/03/2025

Installed control board ran tests all ok.

We serviced a

WHIRLPOOL DRYER

Model WED5010LW1

Near Medford, OR 97504

Jeff

Job Details: 03/03/2025

Installed parts tested machine working as should

We serviced a

WHIRLPOOL DISHWASHER

Model WDT750SAKZ3

Near Prineville, OR 97754

Austin

Job Details: 03/03/2025

Installed parts ordered. Tested unit. All ops sat per factory spec.

We serviced a

WHIRLPOOL DISHWASHER

Model WDF341PAPM2

Near Redmond, OR 97756

Austin

Job Details: 03/03/2025

Cycled power to unit. Tested unit. All ops sat per factory spec.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS315SDHM12

Near Redmond, OR 97756

Austin

Job Details: 03/03/2025

Unit has the wrong water filter installed. Customer will get correct water filter and install it.

We serviced a

KITCHENAID RANGE

Model KSDB900ESS5

Near Ashland, OR 97520

Jeff

Job Details: 03/03/2025

Found lower element blew apart needs replaced called tech line file 7741068195 they told me to give him the number and have him call customer service to see if repair is warranty his proof of purchase shows he paid for a 4 year extended warranty completing wo for today

We serviced a

WHIRLPOOL WASHER

Model WTW4655JW2

Near Grants Pass, OR 97526

Thomas

Job Details: 03/03/2025

Grinding noise during agitation. Agitator not secured to wash plate. Secured both pieces together. Ran agitation and spin in diagnostic mode. No more grinding noise. Advised customer

We serviced a

KITCHENAID DISHWASHER

Model KDFE204KPS3

Near Sunriver, OR 97707

Levi

Job Details: 03/03/2025

Tested and confirm that dispenser was not opening during diagnostics. Replace dispenser and tested. Dispenser is now opening during cycle. Looks like the little lever on the back side disconnected from the solenoid on the old dispenser and that's why It had failed to work

We serviced a

MAYTAG WASHER

Model MVW6230HW3

Near Medford, OR 97504

Jeff

Job Details: 03/03/2025

Installed parts tested machine working as should

We serviced a

MAYTAG REFRIGERATOR

Model MRT311FFFH01

Near Medford, OR 97504

Jeff

Job Details: 03/03/2025

Installed evap and compressor put 47 g r600. Tested good nice frost pattern

We serviced a

LG WASHER

Model WT7305CW

Near Monument, CO 80132

Dvante

Job Details: 02/28/2025

"Checked unit, couldnt find the leak from unit. Checked the water level and pressure switch. Both tested ok. Checked both drain hoses, water lines and inlet valve assembly. No leaks coming from there. Checked the basket and outer tub, no cracks or damages. Unit isnt leaking. Working as designed."

We serviced a

SAMSUNG DRYER

Model DVE45T3200

Near Colorado Springs, CO 80922

Brandon

Job Details: 02/28/2025

"Cleared out venting and straightened venting, tested operation all checks ok"

We serviced a

MAYTAG DRYER

Model MED7230HW1

Near Grand Junction, CO 81504

Sean

Job Details: 02/28/2025

"Checked unit MN SNCustomer signed disclaimer.Opened unit and removed control ,top panel and front door panel.Removed the drum,the rollers and the pulley roller. Installed new rollers all around and secured with clips.Removed the fan cover and removed the blower.Installed new blower and seal.Reassembled the unit. Restored power and tested unit started and heated up. But the unit was still clanking.Opened the top and removed the drum baffles and removed rocks and debris out of them and reassembled the unit and tested unit starts heats and is quite.Tested unit good .Please fill out a May tag technician survey. Thank you."

We serviced a

GE RANGE

Model JB645RK9SS

Near Colorado Springs, CO 80916

Ralph

Job Details: 02/28/2025

replaced listedc parts ande unit checked okay

We serviced a

WHIRLPOOL DISHWASHER

Model DU1055XTVS0

Near Colorado Springs, CO 80915

Charles

Job Details: 02/28/2025

"Leaking wash motor, need motor/sump W10806701 Service fee $139.95 Labor $229.85 MPS $14.50 Part $273.59 Tax $22.43 Total $680.42 declined estimate, will buy new. Paid service fee $139.95 autho 4T444K"

We serviced a

BOSCH DISHWASHER

Model SHX78CM5N/25

Near Silverthorne, CO 80498

Erik

Job Details: 02/28/2025

CX starts cycle before bed and after 8 hours its WETcall BSH TAG: tech explained CX must use delay cycle 2-3 hours for better results or use during the dayCX is using rinse aid and utilzing cycles correctly - unit will condensate when completely cooled - CX informed of home connect page 21 for details

We serviced a

FISHERPAYKEL REFRIGERATOR

Model RF170WLHJX1

Near Colorado Springs, CO 80904

Ralph

Job Details: 02/28/2025

rewimstalloed drawer and unit checked kay

We serviced a

SAMSUNG DRYER

Model DVE50A8600E/A3

Near Pueblo, CO 81008

Domingo

Job Details: 02/28/2025

Running hass overall check it throw a c80 code which mean clogged vent and the dryer is goodSc 139.95 see pic for authorization

We serviced a

WHIRLPOOL DISHWASHER

Model KDTM604KPS0

Near Colorado Springs, CO 80921

Aaron

Job Details: 02/28/2025

"Removed and replaced motor sump assembly, tested unit through diagnostics, working well now, no leaks, installed litmus strip. Auth remaining balance $229.95 #E3F4A9"

We serviced a

PROFILE DRYER

Model PTD70EBPT1DG

Near Colorado Springs, CO 80916

Charles

Job Details: 02/28/2025

"Not drying, no air flow outside, installers pushed to back wall crushing vent. Removed kink and tested airflow. Advised customer on flex vent ride behind dryer."

We serviced a

GE WASHER

Model GTW538ASW0WS

Near Grand Junction, CO 81505

Sean

Job Details: 02/28/2025

Checked the unit MN SN POP Got pictures. Customer signed the disclaimer.Tested the unit. Found that the cold water was not working.Opened up the control panel and found the cold water valve electricals was not connected. Connected the wiring and tested the unit tested good.Cold water is now working.Tested the unit good. Thank you and please fill out a technician survey.

We serviced a

DACOR RANGE

Model ERD48SCP/H

Near Colorado Springs, CO 80908

Jerimiah

Job Details: 02/28/2025

Custs were asking to verify once more where the was coming from and to see if there was any more that can be done. Cust will ultimately look for new unit but wanted a 2nd chance opinion for current. Closing call.

We serviced a

MAYTAG DRYER

Model MEDB835DW4

Near Pueblo West, CO 81007

Domingo

Job Details: 02/28/2025

Put it apart and back together

We serviced a

JENN-AIR COMBINATION OVEN

Model JMW3430LM00

Near Colorado Springs, CO 80906

Ralph

Job Details: 02/28/2025

installed part and unit checked okay

We serviced a

JENN-AIR ICE MACHINE

Model JUIFX15HX01

Near Colorado Springs, CO 80906

Ralph

Job Details: 02/28/2025

"upon arrival unit still not filling correctly with a filter in place and also now the ice is coming out as slivers of ice thinner than 1/16th of an inch, called tech support as cust had water pressure checked and it came up as 55 lbs, which tested good, tech support is submiotting this unit i=to review and will either call me to order more parts or will call cust to replace the unit...file npo. 7739585150"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS321SDHZ11

Near Ashland, OR 97520

Jeff

Job Details: 02/28/2025

Called tech line file 7741052850 and was told to give customer file number and have them call customer service to see if they want to repair machine or replace unit. This is a warranty call.

We serviced a

LIEBHERR REFRIGERATOR

Model n/a

Near Colorado Springs, CO 80906

Charles

Job Details: 02/28/2025

Installed freezer temp sensor

We serviced a

KITCHENAID MICROWAVE

Model KOCE507ESS11

Near Colorado Springs, CO 80918

Dvante

Job Details: 02/28/2025

"Replaced inverter and mag. Tested unit and found the weird noise coming from unit. Stop microwave and checked inside, found the inside and cover plate burned. Called tech support, explained the burned marks inside. The unit is deemed unrepairable. Did give customer the document number to give to customer service. SR7741035717"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF535SWHZ07

Near Grand Junction, CO 81504

Sean

Job Details: 02/28/2025

Checked unit MN SN Customer signed disclaimer.Checked unit turned unit on and removed back panel .Checked compressor. Compressor started and was moving some heat. Removed kick plate and checked the condenser. Found the condenser was plugged took picture.Got my scid guard and pulled out unit.Cleaned off the condenser with brushes and my vacuum.Reassembled unit and checked the compressor. It is running a lot better and sounds better. It is now pulling 0.08 amps . Unit is cooling down and tested unit good.Please fill out a tech servey .Thank you.Customer is responsible for labor @ $159.95.AUTH code 3K4FRX

We serviced a

SAMSUNG RANGE

Model NY58J9850WS/AA

Near Monument, CO 80132

Dvante

Job Details: 02/28/2025

"Checked unit, found the unit to be operating as designed. Called tech support and asked about the cooling fan not staying on. It said it was designed that way. Checked the bake element to make sure it was getting voltage when its on and no voltage when its off. It tested ok. Checked the control panel and main pcb, no damage or burn marks around. Unit is working as designed.Service Fee-$149.95$149.95 CC Auth# ULVXF9"

We serviced a

SAMSUNG WASHER

Model WF45T6000AW/A5

Near Monument, CO 80132

Dvante

Job Details: 02/28/2025

"Replaced diaphragm. Tested diagnostic mode, no error codes or leaks found. Unit is operating as designed. Customer has paid for labor$209.95 CK Auth# 9Y94VU"

We serviced a

SAMSUNG DISHWASHER

Model DW80M9550US

Near Colorado Springs, CO 80906

Mathew

Job Details: 02/28/2025

ReplCed faulty drain pump. Observed unit while in test mode and heavy cycles. All okay. Collect labor. $199.95. $199.95 CC Auth# 49MJ9E

We serviced a

SAMSUNG REFRIGERATOR

Model RF27T5241SR/AA

Near Colorado Springs, CO 80922

Brandon

Job Details: 02/28/2025

Replaced parts and tested on all checks ok

We serviced a

SAMSUNG DRYER

Model DVE52A5500V/A3

Near Colorado Springs, CO 80911

Mathew

Job Details: 02/28/2025

"Found squeaking noise coming from inside dryer case. Motor seized. Replaced motor, belt and rollers. Test op all okay."

We serviced a

SAMSUNG DISHWASHER

Model DW80CG4021SRAA

Near Colorado Springs, CO 80925

Mathew

Job Details: 02/28/2025

"Found obstruction in drain assembly. Removed obstruction, test op 3 times on all cycles. All okay."

We serviced a

SAMSUNG DRYER

Model DVE50BG8300VA3

Near Colorado Springs, CO 80911

Mathew

Job Details: 02/28/2025

"Found belt off of idler pulley, frayed. Install new belt and test op on OQC. All okay."

We serviced a

SAMSUNG DRYER

Model DVE55CG7100VA3

Near Colorado Springs, CO 80916

Mathew

Job Details: 02/28/2025

Found high limit has no continuity. Replace element assy. Test op on OQC. All okay.

We serviced a

SAMSUNG DRYER

Model DVE41A3000W/A3

Near Pueblo, CO 81001

Domingo

Job Details: 02/28/2025

No power coming from plug needs to call an electrician i did not replace parts since machine is not getting power

We serviced a

SAMSUNG REFRIGERATOR

Model RF32CG5100SRAA

Near Colorado Springs, CO 80911

Mathew

Job Details: 02/28/2025

Replace dented fridge door. Test op on OQC. All okay.

We serviced a

SAMSUNG DISHWASHER

Model DW80R9950US/AA

Near Colorado Springs, CO 80924

Dvante

Job Details: 02/28/2025

"Checked unit, found leakage under same spot. Contacted tech support. Was telling to have the unit lean back to make sure the water isnt coming towards the front. Also look at the candy cane extension connected to the drain hose. The extension would have to be modified. Drain hose isnt long enough to reach the pipe, so the extension would have to be installed. Samsung customer support will reach out to customer."

We serviced a

SAMSUNG WASHER

Model WA50R5400AW/US

Near Pueblo, CO 81001

Domingo

Job Details: 02/28/2025

Replaced board and water inlet test it and test it good

We serviced a

SAMSUNG DRYER

Model DVE53BB8700TA3

Near Elbert, CO 80106

Brandon

Job Details: 02/28/2025

"Replaced motor assy and belt, leveled unit, pedestal leg support is broken rear left support and is the reason that belt keeps coming off, secured leg support as best as possible but issue happens again then pedestal needs replaced Samsung does not cover the pedestal"

We serviced a

SAMSUNG REFRIGERATOR

Model RS27T5200SR/AA

Near Colorado Springs, CO 80906

Brandon

Job Details: 02/28/2025

Installed missing micro switch and tested operation all checks ok

We serviced a

SAMSUNG WASHER

Model WD53DBA900HZA1

Near Colorado Springs, CO 80916

Mathew

Job Details: 02/28/2025

Found lint buildup in air channel assembly. Removed and test op. All okay.

We serviced a

SAMSUNG RANGE

Model NE63A6511SG/AA

Near Pueblo, CO 81005

Domingo

Job Details: 02/28/2025

Replaced regulator test it and test it good

We serviced a

SAMSUNG REFRIGERATOR

Model RF28HMEDBWW/AA 17

Near Peyton, CO 80831

Brandon

Job Details: 02/28/2025

"Replaced ice maker and tested operation, cycled ice maker, no errors, all checks ok, svf paid $139.95 Auth# KF99L9"

We serviced a

WHIRLPOOL WASHER

Model MHW5630HW3

Near La Pine, OR 97739

Levi

Job Details: 02/28/2025

"Tested all components, all checks okay. Clear s error codes"

We serviced a

WOLF WALL OVEN

Model SO30PM/S/PH

Near Colorado Springs, CO 80906

Ralph

Job Details: 02/28/2025

replaced lisdted parts and unit checkedf okay

We serviced a

COVE DISHWASHER

Model DW2450

Near Colorado Springs, CO 80904

Charles

Job Details: 02/28/2025

Installed heating element rework kit 830134

We serviced a

MAYTAG DRYER

Model MED9700SB0

Near Colorado Springs, CO 80908

Jerimiah

Job Details: 02/28/2025

Unit screeching when running a dry cycle. Found broke pulley on back of unit. Repaired. Unit check ok disclosed survey to cust fcc 5star chk#6113 $438.50 CK Auth# Y3WYU4Repair kit $77.73Labor $199.95; used 1 4392067 (Belt pulley kit) from stock

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRX735SDHZ08

Near Rio Rancho, NM 87124

Antonio

Job Details: 02/28/2025

cx compaint - ice maker not making ice - called technical support to have it documented - please order ice maker and to cx house and installed ice bin - survey mentioned

We serviced a

KITCHENAID DISHWASHER

Model KDTM404KPS0

Near Tijeras, NM 87059

Jason

Job Details: 02/28/2025

Installed parts listed ran quick cycle unit opperation checks ok. spoke to cx about review

We serviced a

AMANA WASHER

Model NTW4519JW2

Near Albuquerque, NM 87107

Larry

Job Details: 02/28/2025

Installed parts listed and tetsed good - Unit is good to go - Survey mentioned

We serviced a

KITCHENAID DISHWASHER

Model KDTM404KPS0

Near Rio Rancho, NM 87144

Larry

Job Details: 02/28/2025

"Cx complaint - DW beeping noise/not starting - Inspected unit and found F8E4, F10E2, F4E3 errors - Cleared errors and ran diag cycle with no errors - Can not duplicate issue - Called techline to document (SR7741054533) - Unit is operating as designed - Survey mentioned"

We serviced a

WHIRLPOOL WASHER

Model WTW5057LW0

Near Edgewood, NM 87015

Jason

Job Details: 02/28/2025

Installed parts listed ran quick cycle unit checks ok. spoke to cx about review

We serviced a

KITCHENAID DISHWASHER

Model KDFM404KPS3

Near Rio Rancho, NM 87124

Antonio

Job Details: 02/28/2025

"cx complaint - bad smell around dishwasher - unit is working properly - pulled out unit ,there was mold back of cx cabinet from a water leak and not from dishwasher - survey mentioned"

We serviced a

WHIRLPOOL DISHWASHER

Model WDT750SAKZ3

Near Albuquerque, NM 87111

Jason

Job Details: 02/28/2025

Checked unit found upper rack spray arm clips where sticking out causing spray arm to hit them. adjusted fitment of spray arm ran wash cycle unit checks ok. spoke to cx about review

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS325SDHZ08

Near Albuquerque, NM 87106

Larry

Job Details: 02/28/2025

CX complaint - Fridge tripping breaker - Inspected unit and found the compressor pulling 2.31amps at start up then 1.24amps while running - The defrost heater pulling 1.42amps and everything else pulling less than 1amp -Using a blowdryer on high to add load it is pulling 13.62amps with no ill effect - Called Safety to document (SR7740937445)

We serviced a

WHIRLPOOL WASHER

Model WTW8127LC1

Near Rio Rancho, NM 87144

Antonio

Job Details: 02/28/2025

cx complanit - will not turn during washing - went into diagnostic no error codes were found.ran unit in diagnostic mode past uniy is working properly.survey mentioned*

We serviced a

MAYTAG DRYER

Model MVW4505MW1

Near Rio Rancho, NM 87124

Antonio

Job Details: 02/28/2025

"cx complaint - clothes not drying - replace element and cutoff, unit is working properly - survey mentioned"

We serviced a

WHIRLPOOL WASHER/DRYER COM

Model WET4027HW2

Near Grand Junction, CO 81505

Sean

Job Details: 02/28/2025

Checked unit MN SN Customer signed disclaimer.Opened unit and tested unit was not heating.Removed front control panel and the door panel . Removed the supporting shroud and the heating element.Installed new heating element.Removed and installed new cut off switches.Reassembled the unit .Tested. Unit starts and heats up.Unit cycled heat off at 175?f. Unit tested good. Removed a large amount of lint from the cavity. Please fill out a whirlpool service technician survey.Thank you.

We serviced a

MAYTAG WASHER

Model MVW7232HC2

Near Peyton, CO 80831

Aaron

Job Details: 02/28/2025

"Removed and replaced gearcase and washplate, tested unit through DLMS and diagnostic cycles, working well now, no leaks, installed litmus strip and advised customer of survey."

We serviced a

WHIRLPOOL M/W OTR

Model WMH31017HW09

Near Trinidad, CO 81082

James

Job Details: 02/28/2025

Installed ordered parts tested ops all ckok

We serviced a

WHIRLPOOL DISHWASHER

Model WDF332PAMS0

Near Colorado Springs, CO 80903

Carlos

Job Details: 02/28/2025

"Power cord secured, ran test runs ok. Called safety SR 7740997602"

We serviced a

KITCHENAID DISHWASHER

Model KDFM404KPS3

Near Colorado Springs, CO 80907

Carlos

Job Details: 02/28/2025

"Installed diverter disks, and adjusted foot cover at door, runs all ok"

We serviced a

KITCHENAID WALL OVEN

Model KOEC530PSS00

Near Colorado Springs, CO 80908

Aaron

Job Details: 02/28/2025

"F1E5 error code when attempting to use the microwave, no damage in the waveguide, removed and replaced inverter and magnetron, tested unit, working and heating well now, verified by customer. Advised customer of 5 star survey."