We serviced a
SCOTSMAN ICE MACHINE
Model SCCP50MB-1SS
Near Colorado Springs, Colorado 80908
Ralph
Job Details: 09/24/2024
"UNITN HAD A CLOGGED DRAIN HOSE, CLEARED AND UNIT CHECKED OKAY"
We serviced a
JENNAIR REFRIGERATOR
Model JFFCC72EFP02
Near Colorado Springs, Colorado 80904
Ralph
Job Details: 09/24/2024
"INSTALLED PART AND UNIT CHECKED OKAY, CUST OT MONITOR"
We serviced a
BEST VENT HOOD
Model D49M36SB
Near Colorado Springs, Colorado 80906
Eric
Job Details: 09/24/2024
"Could not locate model and serial number, called tech support and with there aid found that lifting motor is failing and will need to be replaced. Customer stated that parts should be covered and is going to call manufacturer to get WO changed. Collected HC $149.95$149.95 CC Auth# R3KWYP"
We serviced a
SAMSUNG REFRIGERATOR
Model RF30BB6200QLAA
Near Colorado Springs, Colorado 80924
Mathew
Job Details: 09/24/2024
Replaced damaged mullion strip. Adjusted door height. Test op all okay.
We serviced a
SAMSUNG WASHER
Model WA55A7300AE/US
Near Colorado Springs, Colorado 80919
Mathew
Job Details: 09/24/2024
Found spin basket wobbling. Tightened Spanner nut under washplate. Educate Cx on washing with new machine.
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5201SR/AA
Near Colorado Springs, Colorado 80910
Brandon
Job Details: 09/24/2024
"Leaking from water connection at door l, tightened and tested op all checks ok hass oqc passed"
We serviced a
SAMSUNG DRYER
Model DV45H7000EW/A2
Near Colorado Springs, Colorado 80921
Mathew
Job Details: 09/24/2024
Replaced element. Test op all okay. $179.95 CC Auth# ML3N33Collect labor $179.95
We serviced a
FRIGIDAIRE REFRIGERATOR
Model LFTR2045ZF3
Near Woodland Park, Colorado 80863
David
Job Details: 09/24/2024
"Checked refrigerator, found plug by compressor loosing contact. Repaired wiring. Refrigerator is running and cooling."
We serviced a
MAYTAG REFRIGERATOR BO
Model MMF2258FEZO2
Near Breckenridge, Colorado 80424
Antonio
Job Details: 09/24/2024
Installed wire back in its proper location unit tested good$149.00 CC Auth# CCU4XY
We serviced a
SAMSUNG WASHER
Model WF45M5500AP/A5
Near Colorado Springs, Colorado 80908
Mathew
Job Details: 09/24/2024
"Inspected all points of failure. Hoses, gaskets, door seal. Inspected drum, water connections, valves all okay. Found water coming from drain filter. Re installed drain filter. Found Water standing underneath drain filter. Hooked unit up to perform test cycle. Ran thru smart install, all okay. Ran quick wash, all okay. Left leak strip."
We serviced a
GENERAL ELECTRIC REFRIGERATOR
Model PFCS1PJZASS
Near Colorado Springs, Colorado 80906
David
Job Details: 09/24/2024
"Water line at water valve seeping, repaired line, placed leak strip. Not leaking now"
We serviced a
SAMSUNG DISHWASHER
Model Dw80m9960ug
Near Colorado Springs, Colorado 80906
Brandon
Job Details: 09/24/2024
"No errors, grinding vane motor, smart install mode passed, Svf paid $129.95 Auth# MHN443"
We serviced a
MONOGRAM RANGE
Model ZDP48N6D
Near Colorado Springs, Colorado 80906
Jerimiah
Job Details: 09/24/2024
"Installed replacement igniter switch, unit check ok. Charged labor as quoted $209.95 CC Auth# AE9WE3"
We serviced a
GE WASHER
Model GTW460ASJ6WW
Near Manitou Springs, Colorado 80829
David
Job Details: 09/24/2024
"Checked washer, washer operating as designed. A little cx education."
We serviced a
MAYTAG WASHER
Model MVW7232HWO
Near Peyton, Colorado 80831
Aaron
Job Details: 09/24/2024
"F7E4 Slider error code upon arrival, inspected unit, have good water pressure, no sign of excessive sediment in inlet valves, built up debris in the wash basket, unable to remove stator bolt to inspect Slider, Slider assembly is engaging tub during diagnostics, wiped up debris in tub. Advised customer on usage. Auth $129.95 #4U44UK"
We serviced a
SCOTSMAN ICE MACHINE
Model DCE33PA-1SSD
Near Colorado Springs, Colorado 80906
Eric
Job Details: 09/24/2024
"Replaced failed items and tested ice maker working properly at this time, customer to monitor."
We serviced a
JENN-AIR ICE MACHINE
Model JUIFX15HX01
Near Carbondale, Colorado 81623
James R
Job Details: 09/24/2024
checked unit found leak on supply line into unit about 18' from back panel. took picturs of leak.called tech support sent them pics. Customer will need to have supply line changed. Water supply is turned off under sink took pic.Also advised to all safety team. SR# 7739981383 Tried to call safety team are closed. Customer not available to sign ticket.
We serviced a
JENN-AIR REFRIGERATOR
Model JF36NXFXDE01
Near Dillon, Colorado 80435
Antonio
Job Details: 09/24/2024
Installed led kit unit tested good $149.95 CC Auth# XMH443
We serviced a
WHIRLPOOL RANGE
Model WEG745H0LZ1
Near Colorado Springs, Colorado 80923
Aaron
Job Details: 09/24/2024
"Center burner clogged with built up debris, cleared and tested, lighting well now, front right gas valve has slight bend, still operational. Rest of burners are lighting well. Center burner head assembly w11435660 $111.86Front right gas valve w11223016 $182.82Total parts $294.68Tax $24.16Supplies $14.50Hc $129.95Labor $219.95Total job $683.2430 day estimate No return on parts Auth $129.95 hc #F9NPKA"
We serviced a
JENN-AIR WALL OVEN
Model JJW3830LL00
Near Colorado Springs, Colorado 80921
Glenn
Job Details: 09/24/2024
"Installed New Controls & Console. Unit appears to be working now w/o errors, however, lower oven lights not working. Found Console was already programmed for different model. reprogrammed console. all ops test ok. Conduit installed by novice apparently, had to loosen junction box to provide slack. All OPS Test:OK"
We serviced a
WHIRLPOOL BEVERAGE CENTER
Model WUB50X24HZ02
Near Colorado Springs, Colorado 80924
Aaron
Job Details: 09/24/2024
"Door strike is not engaging switch properly, corrected and tested unit, working well now. Advised customer of 5 star survey."
We serviced a
BOSCH DISHWASHER
Model SHE3AEM2N/35
Near Pueblo West, Colorado 81007
James
Job Details: 09/24/2024
Found loose wire at cntl secured and tested all test good
We serviced a
JENN-AIR WINE COOLER
Model JUW24FLARS00
Near Santa Fe, New Mexico 87501
Jason
Job Details: 09/24/2024
Checked unit found there is a master switch for lights. switched it off and showed cx where switch is located unit checks okAuth code:MPNEAA$162.70
We serviced a
DACOR WALL OVEN
Model DOB30M977SS
Near Colorado Springs, Colorado 80906
Brandon
Job Details: 09/24/2024
"4219 gate code, possibly tripped breaker, tested bake function broiler is working possible bad bake element cannot confirm because power cord is too short to remove unit to verify, recommend electrician to install longer power cable for unit so it is able to be pulled out and worked on while unit still has power"
We serviced a
SAMSUNG DRYER
Model DVE50R5400V/A3
Near Colorado Springs, Colorado 80924
Mathew
Job Details: 09/24/2024
"Installed Cx provided element, replaced door switch I broke. Test op, all okay. Repair total $309.90Paid $150.00 previously. (Cash)Repair total due $159.90"
We serviced a
GE RANGE
Model JB655YKCFS
Near Dillon, Colorado 80435
Erik
Job Details: 09/24/2024
Install parts on site and test: PASSJOB COMPLETECX not available for signature
We serviced a
MONOGRAM REFRIGERATOR/TOP
Model ZISB420DNEII
Near Glenwood Springs, Colorado 81601
Sean
Job Details: 09/24/2024
customer signed discloseri removed and replaced the ice maker reattached to unit tested still got no water disconnected water and power removed and replaced the water valve. restarted unit.please fill out the tech servey.
We serviced a
PROFILE REFRIGERATOR
Model PFE28KBLRTS
Near Pueblo, Colorado 81001
James
Job Details: 09/24/2024
Installed ordered part tested ops all ckok
We serviced a
THERMADOR VENT HOOD
Model CVS30RW
Near Colorado Springs, Colorado 80906
Eric
Job Details: 09/24/2024
"Down draft no longer going up. Check power and manually moved vent into position, after which the unit began to work properly. Tested and it goes up and down now on its own and fan also works fine. Collected HC $149.95$149.95 CC Auth# FFFM3F"
We serviced a
PROFILE REFRIGERATOR
Model PWE23KMKGES
Near Glenwood Springs, Colorado 81601
Sean
Job Details: 09/24/2024
checked unit found that the cooler compartment was to cold. chatted with suport to find diag none avalible. checked condencer found it plugged . brushed and vacumed off condencer. reset controler. teps set at 39 in box and 0 in freezer. posable defective temp probe.WR55X10025 SENSOR TEMPERATUREREFRIGERATOR TEMPERATURE SENSORtested unit good. Customer signed disclaimer. Customer paid service call $189.95 auth code 93RJ4H.
We serviced a
JENN-AIR WALL OVEN
Model JJW2827DS03
Near Colorado Springs, Colorado 80906
Carlos
Job Details: 09/24/2024
Ran test did a hard cycle ran test runs ok cx will observe Cx paid SC $149.95 CC Auth# 934NUU
We serviced a
SAMSUNG DRYER
Model DV42H5000EW/A3
Near Pueblo, Colorado 81005
James
Job Details: 09/24/2024
Found loose wire at element causing intermittent no heat secured and tested ops on dryer test good advised cust to have licensed electrician out to fix severely loose outlet.
We serviced a
GENERAL ELECTRIC DISHWASHER
Model GDP665SYNF5
Near Pueblo, Colorado 81001
James
Job Details: 09/24/2024
Found loose wire at ui causing intermittent ui failure. Secured and tested all ops test good
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Grants Pass, Oregon 97526
Austin
Job Details: 09/24/2024
Tech line was contacted about the electrical issues. 7739979436 SR.The unit was tested and found to have a loose L1 connection. The unit is getting 234V coming in and was tested after L1 was connected. The unit was producing 155 degrees on the exhaust and appropriately heating afterwards. The customer was provided a business card and advised to contact if there was any other issues.
We serviced a
SAMSUNG DRYER
Model DVE45R6100
Near Peyton, Colorado 80831
Mathew
Job Details: 09/24/2024
Replaced element assy. Test op all okay.
We serviced a
SAMSUNG DRYER
Model DVE45T3200W/A3
Near Colorado Springs, Colorado 80925
Brandon
Job Details: 09/24/2024
Bad hi limit thermostat replaced heater assembly and tested op all checks ok
We serviced a
WHIRLPOOL RANGE
Model WFE535S0LZ0
Near Colorado Springs, Colorado 80911
Carlos
Job Details: 09/24/2024
Found broken wires repaired all ok
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5501SR/AA
Near Pueblo, Colorado 81005
James
Job Details: 09/24/2024
Installed ordered parts tested ops all ckok
We serviced a
SAMSUNG DRYER
Model DVE50R5400
Near Colorado Springs, Colorado 80925
Brandon
Job Details: 09/24/2024
Bad heating element replaced heater assembly and tested op all checks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model KRFC704FPS05
Near Elbert, Colorado 80106
Aaron
Job Details: 09/24/2024
"RC average temperature 35, FC average 0f, and ice box assembly avg 14f, ice box fan is working well, ice maker tray not in position, corrected and tested unit through harvest cycle, working well now. Discussed situation with techline, no further recommendations. SR7739981364"
We serviced a
AMANA DRYER
Model NED7200TW
Near Colorado Springs, Colorado 80911
Carlos
Job Details: 09/24/2024
Installed cx belt back in place runs ok cx paid sc $129.95 CC Auth# E49WCA
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC300ESS10
Near Bend, Oregon 97701
Austin
Job Details: 09/23/2024
Freezer back panel wasnt properly installed correctly causing freezer fan to hit housing cause a loud noise. Reinstalled back panel properly. Tested unit all ops sat per factory spec.
We serviced a
WHIRLPOOL RANGE
Model WEG745H0LZ4
Near Bend, Oregon 97702
Levi
Job Details: 09/23/2024
Checked ignitor to make sure it was properly aligned and found it not quite perfect. Adjusted ignitor then ran a bake cycle to check that unit gets to 350? then starts it's heat cycles. Oven preheated and cycled 4 to 5 times and fired up immediately each time. Turned it off then restarted bake and it still fires up.
We serviced a
WHIRLPOOL DISHWASHER
Model WDF330PAHB4
Near Bend, Oregon 97702
Levi
Job Details: 09/23/2024
"Installed listed parts, tested, all checks okay"
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC704FPS06
Near Powell Butte, Oregon 97753
Austin
Job Details: 09/23/2024
Installed board to unit. Tested all ops sat per factory spec.
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ1
Near Sunriver, Oregon 97707
Levi
Job Details: 09/23/2024
Inspected pump and drain hose. Debris clogged it up so I cleared it. Tested and all checks okay
We serviced a
WHIRLPOOL RANGE
Model WFES3030RS0
Near Colorado Springs, Colorado 80923
Aaron
Job Details: 09/23/2024
"Fuse shorted out, removed and replaced, tested unit for both bake and broil, working and heating well now. Advised customer of 5 star survey."
We serviced a
KITCHENAID RANGE
Model KSEG700ESS7
Near Peyton, Colorado 80831
Aaron
Job Details: 09/23/2024
"Scratch on top right of control panel assembly, removed and replaced control assembly, no scratches or dents, verified by customer. Advised customer of 5 star survey."
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF577KPS02
Near Colorado Springs, Colorado 80917
Glenn
Job Details: 09/23/2024
"Install New Shelf, All OPS Test:OK"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ1
Near Pueblo, Colorado 81006
James
Job Details: 09/23/2024
Found loose wire at main board and damage to console. Replaced preordered facia and secured all wires. Tested ops all ckok left litmus
We serviced a
WHIRLPOOL RANGE
Model WFE550S0LZ3
Near Colorado Springs, Colorado 80925
Carlos
Job Details: 09/23/2024
"Installed bake element, broil element and board ran test all ok"
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC302ESS08
Near Colorado Springs, Colorado 80904
Carlos
Job Details: 09/23/2024
Installed seal and adjusted tracks all ok
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Edwards, Colorado 81632
Antonio
Job Details: 09/23/2024
Installed new
We serviced a
WHIRLPOOL DRYER
Model WGD8127LW3
Near Edwards, Colorado 81632
Antonio
Job Details: 09/23/2024
"Installed motor, housing, and wheel unit tested good"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ13
Near Leadville, Colorado 80461
Antonio
Job Details: 09/23/2024
Install ACU and thermister. Unit tested good.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHW04
Near Fruita, Colorado 81521
James R
Job Details: 09/23/2024
Customer signed disclaimer. Replaced diffuser. Put unit into diagnostics. Tested diffuser operation it is opening and closing as should. Explained to customer about setting items too close to the diffuser the air coming in is frz temp air and items can freeze. Also not to cover temp sensor on the wall. Cleaned condenser. Please fill out tech satisfaction survey. Thank You.
We serviced a
MAYTAG WASHER
Model MVW7230HW1
Near Colorado Springs, Colorado 80918
Glenn
Job Details: 09/23/2024
"makes grinding noise at end of cycle , Found loose motor bolt. Tighten Motor bolt, All OPS Test:OK"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ12
Near Albuquerque, New Mexico 87107
Larry
Job Details: 09/23/2024
CX complaint - Legs not locking in place - Inspected unit and found the leveler bolt came out - Secured leveler and tested good - Unit is good to go - Survey mentioned
We serviced a
MAYTAG WASHER
Model MVW6500MBK0
Near Albuquerque, New Mexico 87109
Jason
Job Details: 09/23/2024
Checked unit found tub sitting forward causing a vibration re-leveled unit ran test unit checks okspoke to cx about review
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHM12
Near Albuquerque, New Mexico 87107
Larry
Job Details: 09/23/2024
Installed door and gasket and tested good - Unit is good to go - Survey mentioned
We serviced a
WHIRLPOOL DISHWASHER
Model WDF341PAPW2
Near Albuquerque, New Mexico 87109
Jason
Job Details: 09/23/2024
Installed pump motor assy unit checks okSoke to cx about review
We serviced a
MAYTAG WASHER
Model MVW6230RHW2
Near Albuquerque, New Mexico 87122
Jason
Job Details: 09/23/2024
found back panel was loose where tabs go against frame bent tabs unit checks okspoke to cx about review
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHW10
Near Albuquerque, New Mexico 87112
Jason
Job Details: 09/23/2024
Checked unit found on/off switch had gotton bumped turning im off. turned on unit checks ok. also made cx aware of location of switch spoke to cx about review
We serviced a
KITCHENAID DISHWASHER
Model KDTM404KPS0
Near Rio Rancho, New Mexico 87144
Joe
Job Details: 09/23/2024
"Cx complaint, Dishwasher won't start. Replaced console ordered last visit. Tested unit. Unit good to go Advised cx about survey"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHZ04
Near Albuquerque, New Mexico 87108
Jason
Job Details: 09/23/2024
found a hole in line near connection point. removed bad part of line and re-connected. also found freezer door was not sealing at top. heated and re-formed gasket unit checks ok. spoke to cx about review
We serviced a
WHIRLPOOL WASHER
Model CAE2745FQ2
Near Colorado Springs, Colorado 80918
Glenn
Job Details: 09/23/2024
"Water leaking from unit, Found water overspray outside of tub ring during fill. Water collecting on inside of cabinet and dripping down to floor. Techline: SR# 7739963234 , Recommended Water Pressure > 20-100PSI , Adjusted front legs slightly, customer may choose to install a water pan under unit, if water pressure checks good & problem continues. Paid SC Fee of $189.95, Autho# 39JX9Y"
We serviced a
SAMSUNG WASHER
Model WA55A7700AV/US
Near Colorado Springs, Colorado 80921
Brandon
Job Details: 09/23/2024
"Replaced cover and tested op all checks ok, Labor paid $189.95 Auth# J4VCY4"
We serviced a
SUB ZERO REFRIGERATOR
Model BI42UFDID
Near Colorado Springs, Colorado 80919
Eric
Job Details: 09/23/2024
"Replaced failed items, light is working in freezer and ice maker called for water after I turned it on. Customer to monitor."
We serviced a
THERMADOR FREEZER
Model T18ID80NLP/42
Near Pueblo, Colorado 81001
James
Job Details: 09/23/2024
Installed ordered parts tested ops all ckok compressor sprang to life and started moving heat.. cold air started blowing into freezer collected 249.95 $287.44 CC Auth# 4KNE4M
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC704FBS03
Near Monument, Colorado 80132
Glenn
Job Details: 09/23/2024
"Neighbor opened house to let me in then left. Texted her when I was done. Install New Icemaker, Cycle Test > Pass, Fill Test > Pass, Allow 24-48 hours for ice production."
We serviced a
SAMSUNG DRYER
Model DVE50R5400V/A3
Near Colorado Springs, Colorado 80924
Brandon
Job Details: 09/23/2024
Bad high limit thermostat replaced heater assembly and tested op all checks ok hass cable broke unable to run hass
We serviced a
SAMSUNG REFRIGERATOR
Model RS27T5200SR/AA
Near Colorado Springs, Colorado 80922
Brandon
Job Details: 09/23/2024
"Cx concerned unit not making enough ice, no errors cycled ice maker found issues with unit, recommend cx remove some items from freezer to allow for better airflow all checks ok"
We serviced a
SAMSUNG DRYER
Model DVE47CG3500VA3
Near Colorado Springs, Colorado 80923
Brandon
Job Details: 09/23/2024
Bad hi limit thermostat replaced heater assembly and tested op all checks ok hass oqc passed
We serviced a
SAMSUNG RANGE
Model NE63A6511SS/AA
Near Colorado Springs, Colorado 80925
Mathew
Job Details: 09/23/2024
Found front two burners not regulating correctly. Replaced assy control panel. Test op all okay.
We serviced a
SAMSUNG DRYER
Model DVE45B6300P/A3
Near Colorado Springs, Colorado 80921
Brandon
Job Details: 09/23/2024
Bad hi limit thermostat replaced heater assembly and tested op all checks ok hass oqc passed
We serviced a
WHIRLPOOL WALL OVEN
Model WOC54EC0HS04
Near Albuquerque, New Mexico 87120
Larry
Job Details: 09/23/2024
CX complaint - Inside MW mwlted - Inspected unit and found the magnatron failed damaging the wave guide - Unit is non-repairable - Collected SC-auth-9944RM
We serviced a
KITCHENAID RANGE
Model KSGG700ESS2
Near Colorado Springs, Colorado 80923
Aaron
Job Details: 09/23/2024
"Inspected unit, burners are good, cleaned electrodes of debris, unit is lighting well, and has a true vent above the unit, customer declined estimate for new burner head assemblies, leveled unit and verified by customer. Oven temperature is good at time of inspection. Working well now. Auth 129.95 hc #YLF94E"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF954CIHZ00
Near Monument, Colorado 80132
Glenn
Job Details: 09/23/2024
"Not make ice. Water flow at dispenser is ok. Ice maker did cycle on its own after turning it on, however no water into IM. Test 97 > Can hear it trying to fill but no water. No 12VDC Pwr 2 Fill Tube,, Heater Ohms at 66 Ohms, Techline: SR# 7739967237 , Also noticed torn Door Gasket Tabs on LS & RS Doors. Dispenser UI > light blu > Continuity is good from Control to Heater. Bad Control. Defost fill tube, Bad Valve as well.Dr Gskts- W10917313 $202.94 (x2) = $405.88,UI CTRL (@ Disp) - W11533212 $270.70, Hous w/ Htr - W11024083 $157.94 , Dual Vlve - W11535162 $109.20 , Tax 77.39, MPS 14.50, SC 129.95, Labor 229.95, Declined Est, Pd SC > Autho#TRFL9C"
We serviced a
KENMORE REFRIGERATOR
Model 363.9554780
Near Colorado Springs, Colorado 80917
Eric
Job Details: 09/23/2024
Got to location and customer stated that refrigerator is actually working properly tested defrost timer and found nothing wrong with defrost timer. Inspected the rest of unit and unit is running properly at this time.
We serviced a
KITCHENAID DISHWASHER
Model KDTE234GPS0
Near Colorado Springs, Colorado 80907
Carlos
Job Details: 09/23/2024
"Ran test found leak at float switch, removed float switch and adjusted seal. Ran test again, found no leaks Cx paid SC $129.95 CC Auth# 93FWXY"
We serviced a
DACOR DOWNDRAFT VENT
Model RV36B
Near Pueblo, Colorado 81008
James
Job Details: 09/23/2024
Found unit with severe grease buildup causing issues raising and dropping. Able to lift and drop with minimal assistance. Cust ok with unit as is to clean unit would have to be completely removed. Collected 149.95 $149.95 CC Auth# C3FY3V
We serviced a
FISHERPAYKEL DISHWASHER
Model 555555555
Near Larkspur, Colorado 80118
Ralph
Job Details: 09/23/2024
"unit had a blockage interferring with the drain, ;cleared and unit checked okay...autho no. T34U33"
We serviced a
SAMSUNG DISHWASHER
Model DW80R9950US/AA
Near Colorado Springs, Colorado 80910
Mathew
Job Details: 09/23/2024
Replaced door spring. Test op all okay. Paid labor 179.95.
We serviced a
SUBZERO REFRIGERATOR
Model 601R/S
Near Colorado Springs, Colorado 80908
Ralph
Job Details: 09/23/2024
INSTALLED PARTS AND CHARGED THE SYSTEM UNIT CHECKED OKAY.........CUST WANTS IT TYPED OUT THAT PARTS FOR THIS UNIT ARE UNDER WARRANTY FOR A YEAR....autho no. AETRNU
We serviced a
WOLF WALL OVEN
Model S030US-2
Near Colorado Springs, Colorado 80908
Ralph
Job Details: 09/23/2024
INSTALLED OART AND UNIT CHECKED OKAY...AUTHO NO. 4X9EJK
We serviced a
WHIRLPOOL REFRIGERATOR
Model 21TFA**(WRT311FZDW00
Near Monument, Colorado 80132
Ralph
Job Details: 09/23/2024
"intalled parts and unit checked okay, cust to monitor...cust paid labor autho no. R3F3R4"
We serviced a
JENNAIR REFRIGERATOR
Model JFX2897DRP02
Near Colorado Springs, Colorado 80920
Eric
Job Details: 09/23/2024
Replaced failed parts and fridge cooling properly at this time.
We serviced a
MAYTAG DRYER
Model MEDB765FC0
Near Peyton, Colorado 80831
Aaron
Job Details: 09/23/2024
"Heating element is shorted out, thermostat checks out okay, needs element. Element wp3387747 $103.58Tax $8.49Supplies $14.50Hc $129.95Labor $199.95Total job $456.4730 day estimate No return on parts Auth 129.95 hc #UA393C"
We serviced a
GE WASHER
Model GTW585BSV2WS
Near Clifton, Colorado 81520
James R
Job Details: 09/23/2024
"customer signed discloserremoved dispencer, auger and agitater.installed new agitator bass auger and then dispenser. reassembled unit and tested unit good.please fill out the tecg servey."
We serviced a
GENERAL ELECTRIC WASHER
Model GUD24ESSM1WW
Near Vail, Colorado 81657
Erik
Job Details: 09/23/2024
install parts on site/ test: PASSJOB COMPLETECX not available for sinature
We serviced a
GE DISHWASHER
Model GDF550PSR3SS2
Near Gypsum, Colorado 81637
Erik
Job Details: 09/23/2024
unit having FTD error *see quick picsbuilder changed breakers and unit started workingconnect to smartHQ service: confirm function and test: PASSJOB COMPLETECX not available for signature
We serviced a
GE DRYER
Model GTD58EBSV0WS
Near Grand Junction, Colorado 81501
James R
Job Details: 09/23/2024
Signed disclaimer. Replaced thermistors and thermal. Reassembled and test operation. Operating asd should. Please fill out tech satisfaction survey. Thank You.
We serviced a
PROFILE DRYER
Model PTD60EBSR0WS
Near Edwards, Colorado 81632
Erik
Job Details: 09/23/2024
bead caught in drum fin * see quick picsJOB COMPLETE
We serviced a
GE WASHER
Model GFW550SSN5WW
Near Pueblo West, Colorado 81007
David
Job Details: 09/23/2024
"Replaced water valve, tested and is operating correctly."
We serviced a
WHIRLPOOL WASHER
Model WFW5605MC0
Near Colorado Springs, Colorado 80906
Carlos
Job Details: 09/23/2024
Ran test 4 towels unit runs ok per tech line SR-7738474000. Cx needs to make sure spin cycle is at fast.
We serviced a
SAMSUNG WASHER
Model WF50BG8300AVUS
Near Colorado Springs, Colorado 80925
Mathew
Job Details: 09/23/2024
"Replaced valve, test op all okay. Also found gasket broken in hose already installed. Replaced hot water hose. Test op all okay."
We serviced a
DACOR DISHWASHER
Model DDW24M999US/DA
Near Colorado Springs, Colorado 80907
Mathew
Job Details: 09/23/2024
"Found 4c error stored. Ran test, detergent drawer opened. Unit passed OQC. Called techline to troubleshoot. Installed updated harness per techline. Test op all okay."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ04
Near Grand Junction, Colorado 81504
James R
Job Details: 09/23/2024
customer signed discloser checked unit found thar the doors where not level with each other. pulled unit out and placed shim under back righr corner of unit pushed unit back in place and adjusted the leveler legs in front. checked unit doors are level with each onther. installed gaskets checked unit seal. unit tested good.please fill out the tech servey.thank you
We serviced a
MAYTAG WASHER
Model MVW7232HW2
Near Colorado Springs, Colorado 80918
Glenn
Job Details: 09/23/2024
"Verified / Tighten Motor Bolt. Reseat connections to PCB. All OPS Test:OK at this time. If problem returns, order new Slider Assy & Clutch."
We serviced a
THERMADOR VENT HOOD
Model VCIN36GWS/02
Near Colorado Springs, Colorado 80921
Eric
Job Details: 09/23/2024
Customer is not happy with the efficiency of the hood vent and will need installation adjustments in order to bring it to their satisfaction. Customer is not satisfied with Control panel cause it is hard to see and suction is not efficient due to the installation. Showed customer how to remove grease filters so they can be cleaned.