We serviced a
GE WASHER
Model GTW465ASN9WW
Near Breckenridge, Colorado 80424
Erik
Job Details:
03/25/2025
connect to smartHQ service: OUT OF BALANCE FINAL SPINLEVEL UNIT / inform CX that washing bath rugs is NOT advised although it is listed in the acceptable loads under the HEAVY DUTY cyclecall GE TAG: unaware that it was listed in the owners manual - advised tha if they wash a rug they need to ensure it is balance with towels or like itemsJOB COMPLETE
We serviced a
GE WASHER-DRYER COM
Model GUD27ESSMWW
Near Keystone, Colorado 80435
Erik
Job Details:
03/25/2025
ACCESS WITH KEY FROM RENTAL OFFICECONNECT TO SMARTHQ SERVICE: F26 OUT OF BALANCE LOADPERFORM SPIN TEST WITH PANEL REMOVED*see quick picsUSER ERROR - OVERLOAD SUSPECTED BY WATER STAINS ON UNIT BASE
We serviced a
LG REFRIGERATOR
Model LMXS28626S/00
Near Colorado Springs, Colorado 80917
Charles
Job Details:
03/25/2025
Replaced defrost heater
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC704FBS03
Near Monument, Colorado 80132
David
Job Details:
03/25/2025
"Delivered door and UI. Unpacked door and inspected, he accepted it. did not want installed."
We serviced a
ZEPHYR VENT HOOD
Model AK9234AS
Near Colorado Springs, Colorado 80908
Jerimiah
Job Details:
03/25/2025
"Unit light not working, found loose connector. Unit check ok charged service call. Chk#913 $159.95 CK Auth# 3TAN3X"
We serviced a
BOSCH DISHWASHER
Model SHP78CF5N/01
Near Pueblo, Colorado 81006
James
Job Details:
03/25/2025
Installed all parts could not test because electrician left no room to plug in unit without removing the backs of cabinets. Customer will need to call the elecrician back and have them address their work
We serviced a
BOSCH WALL OVEN
Model HBL8443UC/05
Near Breckenridge, Colorado 80424
Erik
Job Details:
03/25/2025
CX used self clean - high limit TCOflip breaker - reset TCO/ test: PASSbake 350* - GOODbroil HI -GOODJOB COMPLETE
We serviced a
BOSCH DISHWASHER
Model SHP65CM6N/25
Near Breckenridge, Colorado 80424
Erik
Job Details:
03/25/2025
ACCESS UNIT THROUGH GCINSTALL DISHWASHERCX NOT AVAILALE FOR SIGNATURE
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS555SIHZ06
Near Los Alamos, New Mexico 87544
Jason
Job Details:
03/25/2025
Installed ice maker unit opperation checks ok spoke to cx about review
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Colorado Springs, Colorado 80910
Carlos
Job Details:
03/25/2025
Installed timer all ok
We serviced a
MAYTAG DISHWASHER
Model MDB4949SDE
Near Colorado Springs, Colorado 80918
Mathew
Job Details:
03/25/2025
"Found obstruction on float. Remove obstruction. Test op, all okay."
We serviced a
JENN-AIR WALL OVEN
Model JMW2430IL03
Near Santa Fe, New Mexico 87506
Jason
Job Details:
03/25/2025
Installed console checked opperation of console unit opperation checks okspoke to cx about review Auth code: A93MAC$472.75
We serviced a
MAYTAG WASHER
Model MHW5630HW0
Near Colorado Springs, Colorado 80918
Mathew
Job Details:
03/25/2025
"Found drain pump not moving water, replace drain pump assy. Test op. All okay. Unit working as expected."
We serviced a
SAMSUNG DISHWASHER
Model DW80R7060US
Near Colorado Springs, Colorado 80921
Dvante
Job Details:
03/25/2025
"Checked unit, was able to power on unit. Tested diagnostic mode. Wash pump is running. Water is circulating inside. Checked inside again and found water too cold. Turned hot water on from the sink. Tested unit again, steam was coming out. Advised customer to run the hot water before starting unit due to the water heater being on the other side of residence. Unit is operating as designed."
We serviced a
KITCHENAID RANGE
Model KSDB900ESS9
Near Bend, Oregon 97702
Levi
Job Details:
03/24/2025
"Replaced both sensors, tested, all checks okay"
We serviced a
WHIRLPOOL RANGE
Model WFG505M0MS0
Near Rogue River, Oregon 97537
Thomas
Job Details:
03/24/2025
Replaced ignitor. Ran tested okay with customer present
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF536RPS00
Near Bend, Oregon 97702
Levi
Job Details:
03/24/2025
"Found leak on the high side using. Repaired, tested, and no more leaks found."
We serviced a
KITCHENAID DISHWASHER
Model KDFM404KPS3
Near Bend, Oregon 97701
Levi
Job Details:
03/24/2025
"Replaced sump assembly, tested, all checks okay no leaks at time of service were found"
We serviced a
MAYTAG DRYER
Model MED8630HW2
Near Colorado Springs, Colorado 80904
Carlos
Job Details:
03/24/2025
Cx has very poor air flow needs to replace hose with semi rigid or straight steel pipe. Current hose is foil metal and too long.
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC300ESS12
Near Colorado Springs, Colorado 80904
Carlos
Job Details:
03/24/2025
Installed gasket all ok
We serviced a
WHIRLPOOL DRYER
Model WED6150PB0
Near Fountain, Colorado 80817
David
Job Details:
03/24/2025
"Checked dryer, heating for a couple of seconds, found plug for sensor not plugged onto control board. Reattached and unit is heating as expected."
We serviced a
MAYTAG WASHER
Model MVW5430MW1
Near Colorado Springs, Colorado 80904
Carlos
Job Details:
03/24/2025
"Installed control board, ran diagnostic cycle and calibration cycle."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ11
Near Colorado Springs, Colorado 80920
Dvante
Job Details:
03/24/2025
"Checked unit, found the button for water dispenser stuck. Went ahead and replaced the ice door. Tested dispenser and button isnt getting stuck. Unit is operating as designed."
We serviced a
AMANA DRYER
Model NED4655EW1
Near Colorado Springs, Colorado 80908
Mathew
Job Details:
03/24/2025
Replace blower wheel and motor. Machine working as expected. All noises machine is making are within spec. All okay.
We serviced a
KITCHENAID DISHWASHER
Model KDTE304RPS0
Near Colorado Springs, Colorado 80909
Carlos
Job Details:
03/24/2025
Installed console all ok
We serviced a
KITCHENAID REFRIGERATOR
Model KRSF705HPS04
Near Fruita, Colorado 81521
Sean
Job Details:
03/24/2025
Checked unit MN SN POP Customer signed disclaimer.Installed the new water filter Tested unit good.Water dispensing Please fill out the technician survey Thank you .
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ11
Near Grand Junction, Colorado 81503
Sean
Job Details:
03/24/2025
"Verified MN SN POPTechnician removed failed diffuser assembly and installed replacement, ensuring proper placement of both temp probes. Tech reassembled unit and confirmed proper operation within manufacturer specifications.Thank you for allowing us to service your Refrigerator/freezer today! Please take a moment to let us know how we've done by completing our technician satisfaction survey. Call us anytime with questions or any of your appliance needs, and have a wonderful day!"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS555SIHZ00
Near Colorado Springs, Colorado 80907
Ralph
Job Details:
03/24/2025
installed listed parts and unit checked okay
We serviced a
MAYTAG DISHWASHER
Model MDB9959SKZ0
Near Albuquerque, New Mexico 87120
Larry
Job Details:
03/24/2025
Installed sump and tested good - Unit is good to go
We serviced a
WHIRLPOOL WALL OVEN
Model WOS51EC0HS20
Near Rio Rancho, New Mexico 87144
Antonio
Job Details:
03/24/2025
"cx complanit - panel not working - replaced cntrl-elec and assembly,panel - unit is working properly - survey mentioned"
We serviced a
MAYTAG REFRIGERATOR
Model MSS25C4MGZ06
Near Los Lunas, New Mexico 87031
Larry
Job Details:
03/24/2025
CX complaint - Firdge making buzzing noise - Inspected unit and found the condenser lines touching and vibrating causing buzzing noise - Adjusted lines - Unit is operating as designed - Survey mentioned
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ11
Near Albuquerque, New Mexico 87104
Larry
Job Details:
03/24/2025
CX complaint - Making loud noise - Inspected unit and found debris in the condenser fan - Removed debris and tested good - Unit is good to go - Survey mentioned
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRFF3236RZ00
Near Albuquerque, New Mexico 87120
Larry
Job Details:
03/24/2025
CX complaint - Making sputtering noise - Inspected unit and found condenser lines touching and making noise - Adjusted lines and tested good - Unit is good to go
We serviced a
WHIRLPOOL DISHWASHER
Model WDT970SAKZ2
Near Albuquerque, New Mexico 87112
Jason
Job Details:
03/24/2025
Installed hinges checked function and started a quick cycle unit opperation checks ok. spoke to cx about review
We serviced a
WHIRLPOOL DRYER
Model WED5100HC3
Near Albuquerque, New Mexico 87121
Larry
Job Details:
03/24/2025
Installed parts lsited and tested good - Unit is good to go - Survey mentioned
We serviced a
MAYTAG DRYER
Model MED6230HW2
Near Bend, Oregon 97701
Levi
Job Details:
03/24/2025
Customer is hearing sheet metal vibrations when unit gets warm. No abnormal noises heard at time of service.
We serviced a
AMANA WASHER
Model NTW4519JW2
Near Albuquerque, New Mexico 87105
Larry
Job Details:
03/24/2025
CX complaint - not completing cycles - Inspected unit and found the drain harness failed and the capacitor failed - Replaced with pre-id parts and tested good - Unit is good to go - Survey mentioned
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ08
Near Rio Rancho, New Mexico 87124
Antonio
Job Details:
03/24/2025
cx complanit - ice contnr cracked - replaced ice contnr complete - unit is working properly - survey mentioned
We serviced a
WHIRLPOOL DISHWASHER
Model DU1015XTXB1
Near Albuquerque, New Mexico 87123
Jason
Job Details:
03/24/2025
Installed pump motor assy and inlet valve ran quick cycle unit opperation checks ok. spoke to cx about review
We serviced a
MAYTAG DRYER
Model MEDX655DW1
Near Edgewood, New Mexico 87015
Jason
Job Details:
03/24/2025
checked unit found rollers worn. installed parts listed found vent crushed and made cx aware. spoke to cx about review
We serviced a
MAYTAG WASHER
Model MVW7230HW1
Near Albuquerque, New Mexico 87111
Jason
Job Details:
03/24/2025
Inspected unit found strike broken. installed strike ran quick cycle to test opperation of unit/ unit opperation checks ok. spoke to cx about review
We serviced a
WHIRLPOOL WASHER
Model WTW8800YC0
Near Colorado Springs, Colorado 80904
Carlos
Job Details:
03/24/2025
"Called Techline 7741137000, unit is working properly unable to replicate issue, Ran a load of towels and came out ok not soaking. Per techline recommend cx do not mix sheets and towels and keep the extra rinse option turned off."
We serviced a
LG WASHER
Model WM2277HW
Near Colorado Springs, Colorado 80919
Dvante
Job Details:
03/24/2025
Replaced the drain pump. Tested diagnostic mode and unit is draining the water out. No error codes or leaks. Unit is operating as designed.$199.95 CC Auth# ERX399
We serviced a
SAMSUNG WASHER
Model WF53BB8700AVUS
Near Colorado Springs, Colorado 80908
Mathew
Job Details:
03/24/2025
"Found door switch not engaged when door is shut. Inspect door, all okay. Replace switch and door lever. All okay. Unit working as expected."
We serviced a
SAMSUNG RANGE
Model NSE6DG8300SRAA
Near Colorado Springs, Colorado 80922
Mathew
Job Details:
03/24/2025
"Replace Tstat oven sensor and replace faulty front right regulator. Test op, stovetop cycling as expected. All okay."
We serviced a
SAMSUNG WASHER
Model WA55CG7100AVUS
Near Colorado Springs, Colorado 80904
Brandon
Job Details:
03/24/2025
"Door glass shattered, called tech support did visual inspection, Samsung will contact cx, we can close this ticket"
We serviced a
SAMSUNG WASHER/DRYER COM
Model WD53DBA900HZA1
Near Peyton, Colorado 80831
Mathew
Job Details:
03/24/2025
Found lint buildup inside vent assy. Clean vent assy. Test op on of all okay. Test unit on quick dry cycle.
We serviced a
SAMSUNG DRYER
Model DVE55CG7100WA3
Near Colorado Springs, Colorado 80922
Brandon
Job Details:
03/24/2025
Bad TCO replaced heater assy hass oqc passed
We serviced a
SAMSUNG RANGE
Model NSE6DG8100SRAA
Near Colorado Springs, Colorado 80928
Brandon
Job Details:
03/24/2025
"Both front burners not working properly, replaced control assembly and tested operation all checks ok"
We serviced a
ELECTROLUX DRYER
Model EIED55HIW0
Near Colorado Springs, Colorado 80921
Charles
Job Details:
03/24/2025
Replaced element and tested
We serviced a
WHIRLPOOL DRYER
Model WED8127LW1
Near Beaver Creek, Colorado 81620
Antonio
Job Details:
03/24/2025
"Installed new acu and harness, then ran a cycle for proper operation and unit tested good. Also advised cx of whlp survey"
We serviced a
SAMSUNG DRYER
Model DVE45R6100V/A3
Near Colorado Springs, Colorado 80924
Mathew
Job Details:
03/24/2025
Replace control. Test op all okay. Collect labor 179.95. $179.95 CC Auth# MUWXR4
We serviced a
PROFILE REFRIGERATOR
Model PVD28BYNCFS
Near Colorado Springs, Colorado 80925
David
Job Details:
03/24/2025
"Bumped drawer all the way out to its stop, lubed rails."
We serviced a
MIELE RANGE
Model KMR1136-1G
Near Eagle, Colorado 81631
Erik
Job Details:
03/24/2025
INSTALL PARTS/ TEST: FAILCALL MIELE TAG: ALL PARTS HAVE BEEN EXHAUSTED - TAG WILL CALL TECH BACK WITH COURSE OF ACTION FOR CRJOB COMPLETE
We serviced a
MIELE DRYER
Model TWD360WP
Near Colorado Springs, Colorado 80903
Charles
Job Details:
03/24/2025
"Start light not lite on display when turned on, opened door and start light on. Unit working, is using mobile start app sometimes."
We serviced a
SAMSUNG DRYER
Model DVE45B6300C/A3
Near Pueblo, Colorado 81005
James
Job Details:
03/24/2025
Installed ordered parts tested ops all ckok no network at house had office submit payment autho code in notes
We serviced a
LG REFRIGERATOR
Model LF25H6330S.ASTCNA0
Near Colorado Springs, Colorado 80921
Ryan
Job Details:
03/24/2025
In door icemaker was shut off at control panel.Needs selection of second indicator for upper icemaker to work.Icemaker now cycling and operating properlyRK
We serviced a
WOLF MICROWAVE
Model MDD30TM/S/TH
Near Colorado Springs, Colorado 80906
Ralph
Job Details:
03/24/2025
REPLACED HINGES AND UNIT C HECKED OK...CUST PAID TOTAL BILL AUTHO NO. 3YJ3P9
We serviced a
GE DISHWASHER
Model GDT550PGR7BB
Near Grand Junction, Colorado 81505
Sean
Job Details:
03/24/2025
Verified MN SN POPTech verified that the unit was diagnosed correctly.Checked the package good.Removed the retainer screws and pulled the unit out Removed the old pump and installed a new pump.Reassembled the unit and tested. Unit still not draining as designed.Removed screws pulled unit out and checked drain line.Found that the drain line was run up through the top of counters. Reran drain through the bottom penetration.Reassembled the unit and tested. = Unit drained as designed.Tested good. Kick plate is missing screws and the nuts to attach them to. Can not attach kick plate.Please fill out a technician survey.Thank you.
We serviced a
HOTPOINT REFRIGERATOR/TOP
Model HPS10LGVBRWW
Near Grand Junction, Colorado 81506
Sean
Job Details:
03/24/2025
"Technician verified MN SN POPTechnician removed failed, and installed replacement defrost heater in freezer cabinet. Tech verified unit is cooling properly and operating within manufacturer specifications. Thank you for allowing us to service your freezer today, please take a moment to let us know how we've done by completing our technician satisfaction survey. Call us anytime with questions or any of your appliance needs and have a wonderful day."
We serviced a
HOTPOINT REFRIGERATOR/TOP
Model HPS10LGVBRWW
Near Grand Junction, Colorado 81506
Sean
Job Details:
03/24/2025
"Technician verified MN SN POPTechnician removed failed, and installed replacement defrost heater in freezer cabinet. Tech verified unit is cooling properly and operating within manufacturer specifications. Thank you for allowing us to service your freezer today, please take a moment to let us know how we've done by completing our technician satisfaction survey. Call us anytime with questions or any of your appliance needs and have a wonderful day."
We serviced a
HOTPOINT REFRIGERATOR/TOP
Model HPS10LGVBRWW
Near Grand Junction, Colorado 81506
Sean
Job Details:
03/24/2025
"Technician verified MN SN POPTechnician removed failed, and installed replacement defrost heater in freezer cabinet. Tech verified unit is cooling properly and operating within manufacturer specifications. Thank you for allowing us to service your freezer today, please take a moment to let us know how we've done by completing our technician satisfaction survey. Call us anytime with questions or any of your appliance needs and have a wonderful day."
We serviced a
CAFE RANGE
Model CES700P3M4D1
Near Avon, Colorado 81620
Erik
Job Details:
03/24/2025
ACCESS WITH GARAGE CODEinstall parts/ test: PASSJOB COMPLETECX NOT AVAILABLE FOR SIGNATURE
We serviced a
MONOGRAM RANGE
Model ZGU366NT1SS
Near Colorado Springs, Colorado 80908
Dvante
Job Details:
03/24/2025
"Checked unit, found the front left igniter not clean. Was able to clean the igniter. Tested burner, igniter isnt continuously sparking. Unit is operating as designed."
We serviced a
GE DISHWASHER
Model HDF330PGR6WW
Near Manitou Springs, Colorado 80829
Ralph
Job Details:
03/24/2025
INSTALLED PARTS CUST TO MONITOR
We serviced a
LIEBHERR REFRIGERATOR
Model HCS2062
Near Pueblo, Colorado 81006
James
Job Details:
03/24/2025
Installed ordered parts per liebherr tech line. Collected 285.95 $314.55 CC Auth# X9XA43
We serviced a
MAYTAG DRYER
Model MED7230HW2
Near Colorado Springs, Colorado 80921
Dvante
Job Details:
03/24/2025
"Checked unit, found the unit was pushed too far causing the blockage airflow for the vent hose. Move unit forward. Tested unit, unit is getting hot and drying. Unit is operating as designed."
We serviced a
MAYTAG WASHER
Model MVWX655DW1
Near Cedar Crest, New Mexico 87008
Jason
Job Details:
03/24/2025
Checked unit found control is dead 120vac in no responseSC$174.95MPS$17.50LABOR$179.95CONTROL#W11116592$306.55TX$42.84TOTAL$721.79Auth code: EVC4A9$174.95
We serviced a
BOSCH DISHWASHER
Model SHP65CM5N/25
Near Colorado Springs, Colorado 80919
Ryan
Job Details:
03/24/2025
Door was popping open but not falling the rest of the way open for auto dry.Leveled unit so that its not rubbing anywhere and pitched unit slightly forward. Door is now free of any obstruction and opening and closing properly. RK
We serviced a
THERMADOR DISHWASHER
Model DWHD660EFP/01
Near Colorado Springs, Colorado 80919
Charles
Job Details:
03/24/2025
"Installed mounting brackets and secured to cabinets. Service fee $159.95, Part $6.50, Tax $.53, Total $166.98, paid autho 3JAV4N"
We serviced a
BOSCH DISHWASHER
Model SHP65CM5N/25
Near Avon, Colorado 81620
Erik
Job Details:
03/24/2025
RIGHT SIDE DOOR SPRING CAME OUT OF TRACK* see quick picsreplace and test: PASSJOB COMPLETE
We serviced a
KITCHENAID REFRIGERATOR
Model KRSC700HBS00
Near Roseburg, Oregon 97471
Jeff
Job Details:
03/24/2025
Installed compressor put 5.75oz 134. Gauges holding. Customer to monitor
We serviced a
GE MICROWAVE
Model JVM6175SK2SS
Near Monument, Colorado 80132
Charles
Job Details:
03/24/2025
"Not heating, fan runs when door opened, replaced door secondary interlock switch and tested.; used 1 WB24X829 (Secondary switch) from stock"
We serviced a
MAYTAG WASHER
Model MVW6200KW0
Near Pueblo, Colorado 81005
James
Job Details:
03/24/2025
Found previous tech that replaced actuator did not fully seat power to actuator. Secured wire and actuator and tested. All ops test good.
We serviced a
WHIRLPOOL DRYER
Model WED4815EW
Near Colorado Springs, Colorado 80918
Mathew
Job Details:
03/24/2025
"Found obstruction in felt on machine. Remove obstructions. Install dryer repair kit. Test op, all okay."
We serviced a
SAMSUNG DRYER
Model DV45H6300EW/A3
Near Colorado Springs, Colorado 80921
Ryan
Job Details:
03/24/2025
"Dryer vent restricted behind unit.Advised customer to clean vent and not push unit all the way back to wall. Also advised customer to upgrade vent on exterior of home to a higher flow unit,No error codes and unit now testing ok.RK"
We serviced a
FRIGIDAIRE REFRIGERATOR
Model FRSS26L3AF5
Near Pueblo West, Colorado 81007
Domingo
Job Details:
03/24/2025
Check wires from board to thermistor not ohm call tech line they told me mostly broken wires inside cabin so I Call assurance solutions they told me to close the ticket and tell customer they will contact them in 2 business day
We serviced a
MAYTAG WASHER
Model MVW7232HW1
Near Albuquerque, New Mexico 87104
Larry
Job Details:
03/24/2025
CX complaint - Not spining - Inspected unit and found the slider failed - Replaced with TS and tested good - Unit is good to go - Survey mentioned
We serviced a
WHIRLPOOL WASHER
Model WTW8127LC1
Near Central Point, Oregon 97502
Jeff
Job Details:
03/21/2025
Installed parts tested machine no errors pump working
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Redmond, Oregon 97756
Levi
Job Details:
03/21/2025
"Replace timer, tested all checks okay"
We serviced a
AMANA WASHER
Model NTW4516FW4
Near Redmond, Oregon 97756
Levi
Job Details:
03/21/2025
"Installed all listed parts, tested, recalibrated control board. All tests okay no leaks at time of service. Did not complete install because I'm not sure if the machine is going to stay in this unit or not. Job complete"
We serviced a
KITCHENAID DISHWASHER
Model KDTM405PPS1
Near Grants Pass, Oregon 97527
Thomas
Job Details:
03/21/2025
Replaced dispenser. Ran tested okay with customer present. No leaks. Advised customer of survey
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Medford, Oregon 97504
Jeff
Job Details:
03/21/2025
Installed parts tested machine no leaks
We serviced a
WHIRLPOOL DRYER
Model WET4024HW0
Near Colorado Springs, Colorado 80916
Carlos
Job Details:
03/21/2025
Installed repair kit runs ok
We serviced a
KITCHENAID DISHWASHER
Model KDTE204KPS3
Near Peyton, Colorado 80831
Aaron
Job Details:
03/21/2025
"Normal cycle button is not working on UI console, removed and replaced console, ran unit through diagnostics, working well now, verified by customer, installed litmus strip and advised customer of 5 star survey."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRMF3636RZ00
Near Colorado Springs, Colorado 80919
Ryan
Job Details:
03/21/2025
"Removed and replaced Main control and display.Tested operation and all now checks ok , unit is cooling. RK"
We serviced a
KITCHENAID REFRIGERATOR
Model KRSC703HPS05
Near Colorado Springs, Colorado 80927
Aaron
Job Details:
03/21/2025
"Water filter housing clip is not engaging, removed and replaced housing, purged water line, working well now, verified by customer, installed litmus strip and advised customer of survey."
We serviced a
MAYTAG WASHER
Model MVW7232HW2
Near Pueblo West, Colorado 81007
James
Job Details:
03/21/2025
Installed ordered parts tested ops all ckok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF757SDHZ04
Near Colorado Springs, Colorado 80908
Aaron
Job Details:
03/21/2025
"Damper control is chirping during operation, removed and replaced control assembly, tested unit through diagnostics, working well now, verified by customer. Advised customer of 5 star survey."
We serviced a
MAYTAG WASHER
Model MVW7230HW1
Near Pueblo, Colorado 81006
James
Job Details:
03/21/2025
"Installed ordered parts, tested ops all ckok"
We serviced a
WHIRLPOOL WASHER
Model WET4124HW0
Near Colorado Springs, Colorado 80909
Carlos
Job Details:
03/21/2025
"SR-7741194945, smell is due to overloading machine, unit works ok. Safety team SR-7741144472"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHZ04
Near Colorado Springs, Colorado 80917
David
Job Details:
03/21/2025
"Installed damper, it is quieter."
We serviced a
MAYTAG REFRIGERATOR
Model MFI2570FEZ15
Near Fountain, Colorado 80817
Carlos
Job Details:
03/21/2025
"UI had lock engaged, unlocked runs all ok"
We serviced a
WHIRLPOOL RANGE
Model WFES3530RS0
Near Colorado Springs, Colorado 80903
Carlos
Job Details:
03/21/2025
"Installed bake, broil elements and control board ran oven for 20 mins at 500 degrees runs ok"
We serviced a
WHIRLPOOL RANGE
Model WFES3530RS0
Near Colorado Springs, Colorado 80903
Carlos
Job Details:
03/21/2025
Installed handle all ok
We serviced a
WHIRLPOOL DRYER
Model WED560lHW2
Near Colorado Springs, Colorado 80915
Carlos
Job Details:
03/21/2025
Installed tub ran tests all ok
We serviced a
WHIRLPOOL DRYER
Model WED6150PB0
Near Rifle, Colorado 81650
Sean
Job Details:
03/21/2025
"Customer signed disclaimer Verified MN SN POPTechnician found wires at terminal block to be loose, properly installed wires and power cord to enable testing and performed diag on unit. No error codes are present and unit passed all component tests and is now functioning properly according to manufacturer specifications, noting only that the water valve can be heard when tested without water supplied, but is operating properly.Only time unit beeped was in the test mode to test the moisture sensor or end of cycle. Thank you and please fill out a technician survey"
We serviced a
WHIRLPOOL FREEZER
Model WZF34X16DW10
Near Grand Junction, Colorado 81504
Sean
Job Details:
03/21/2025
"Customer signed disclaimerVerified unit MN SN POPInspected received parts, verified correct parts in good condtition.Tech verified non-functionl compressor on unit. Tech discharged refrigerant, removed failed compressor and components and installed new replacement compressor, filter drier, and start components. System put charged with nitrogen and maintained pressure properly throuought the 30 minute test period. System was placed under vacuum and properly maintained as well. System was charged with 1.45oz R-600 refrigerant. Tech confirmed unit is cooling properly and operating within manufacturer specifications.Thank you for allowing us to service your freezer today! please take a moment and let us know how we did by completing our technician survey. Have a wonderful day!"
We serviced a
WHIRLPOOL RANGE
Model WEG745H0FS0
Near Peyton, Colorado 80831
Aaron
Job Details:
03/21/2025
"Arrived onsite and tested unit, bake cycle began, broil would not start, removed and replaced module control, tested unit and both bake and broil will not light, inspected unit and found mouse droppings in unit behind control, intermittently receiving power at the module. Advised customer of situation and survey. Techline closed at time of inspection."
We serviced a
WHIRLPOOL RANGE
Model WEG745H0FS1
Near Colorado Springs, Colorado 80908
Aaron
Job Details:
03/21/2025
"Removed and replaced switch assembly, tested all burners, working well now. Advised customer of 5 star survey."