Service History 251 - D3 Appliance

We serviced a

WHIRLPOOL DISHWASHER

Model WDT730PAHZ0

Near Colorado Springs, CO 80924

Aaron

Job Details: 04/03/2023

"Blower gasket worn, moisture getting past gasket, moisture rusting bracket and flakes are entering blower housing, removed corrosion and replaced parts, tested and working well now. Advised of 5 star survey"

We serviced a

MIELE COFFEE MACHINES

Model CVA6401

Near Colorado Springs, CO 80907

Jessie

Job Details: 04/03/2023

"- customer made a Cappuccino no milk froth issue as of now. tried milk froth no issue. found gasket not seated in flask fully. instructed customer. recommending a milk valveMilk valve#9657026 $586.60tax $48.10sc $149.95$14.50labor $219.95total $1,019.10customer to think about repair"

We serviced a

GE DISHWASHER

Model GDT655SSJ0SS

Near Colorado Springs, CO 80918

Jessie

Job Details: 04/03/2023

"- unit was stuck in delay hoir mode, checked for error codes and found known. bd was blinking correct symbols. suggest a new controlcontrol#wd21x24901 $205.56tax $16.86sc $129.95$14.50labor $189.95total $556.82customer wants to think about repair"

We serviced a

MIDEA DISHWASHER

Model MDT24H3AST

Near Fountain, CO 80817

Ken

Job Details: 04/03/2023

Installed new wash motor and tested. Motor is running quietly now

We serviced a

AMANA DRYER

Model NED4655EW1

Near Colorado Springs, CO 80920

Aaron

Job Details: 04/03/2023

"Unit does not have proper power to generate heat, only 206v at the wall outlet, thermostats and heating element check out ok. Advised of 5 star survey"

We serviced a

WHIRLPOOL DRYER

Model WED8127LW1

Near Grand Junction, CO 81504

James R

Job Details: 03/31/2023

Put a repair kit in unit. 4392067 checked auto dry cycle and timed dry. Op's is good. Cloths must touch sensing bar in order to dry properly.Please fill out whirlpool tech satisfaction survey. Thank You.; used 1 4392067 (Dryer Repair Kit) from stock

We serviced a

MONOGRAM DISHWASHER

Model ZDT925SIN8II

Near Dillon, CO 80435

Erik

Job Details: 03/31/2023

install/ test: GOODJOB COMPLETE!

We serviced a

GE DISHWASHER

Model GDT550PGR3BB

Near Frisco, CO 80443

Erik

Job Details: 03/31/2023

installed tested - GOODJOB COMPLETE!

We serviced a

KITCHENAID RANGE

Model KGSA906PSS00

Near Peyton, CO 80831

Jerimiah

Job Details: 03/31/2023

"Unit died after self clean, found TCO popped, had spare TCO in trunk, installed. Unit check ok charged service call labor and part $408.10 CC Auth# 43L39M disclos3d survey to cust 5star FCC.; used 1 TCO (Tco) from stock"

We serviced a

WHIRLPOOL FREEZER

Model EV150NXAN00

Near Colorado Springs, CO 80921

Glenn

Job Details: 03/31/2023

"making moaning sounds/ still freezing just making noise. Noise has since stopped as of a few days ago. Current Product Temps 3F, Good Frost pattern on Evap, no ice buildup. Fan Appears to sound normal. Unit is located in garage, and backed up against heater along wall. (So Large Condensor Coil on Back of unit and compressor may be effected by heater. Compressor very hot to the touch, Suggest pull unit away from wall heater.Appears that many parts discontinued on this old 1995 unit. All OPS Test OK at this time."

We serviced a

MAYTAG DISHWASHER

Model MDB4949SHZ1

Near Colorado Springs, CO 80918

Aaron

Job Details: 03/31/2023

"Circulation motor is shorted out, replaced and tested unit, working well now. Advised of 5 star survey"

We serviced a

MAYTAG WASHER

Model MVW6200KW2

Near Colorado Springs, CO 80927

Aaron

Job Details: 03/31/2023

"Capacitor is shorted out, unable to agitate or spin, replaced part and tested unit, working well now. Advised of 5 star survey."

We serviced a

WHIRLPOOL M/W OTR

Model WMH31017HZ07

Near Colorado Springs, CO 80927

Aaron

Job Details: 03/31/2023

"Replaced control and light assembly, tested unit and light, working well now. Advised of survey"

We serviced a

MONOGRAM RANGE

Model n/a

Near Colorado Springs, CO 80906

Ken

Job Details: 03/31/2023

Oven door would not open. Tried several different things with no success. Finally got door unlocked by pressing it closed and toggling on/off clean oven. Tested and unit is working properly now. SC 149.95 auth pn99wm

We serviced a

MAYTAG WASHER

Model MHW6630HW0

Near Colorado Springs, CO 80921

Aaron

Job Details: 03/31/2023

"Tested unit through drain and spin cycle, working well. Discussed with techline, if they continue to have issue with off balance loads unit would need tub assembly. SR7736080449Everything else in regards to tub movement has been replaced. Tub assembly w11378552 $931.04Tax $76.35Supplies $14.50Labor 2 tech's 2 hours 229.95?2hrs?2 tech's = $919.18Total job $1,941.6930 day estimateNo return on partsNo collection for hc due to recall"

We serviced a

WHIRLPOOL WASHER

Model WTW7120HC

Near Colorado Springs, CO 80927

Glenn

Job Details: 03/31/2023

"Install Valve, All OPS Test:OK"

We serviced a

WHIRLPOOL WASHER

Model WTW5000DW1

Near Colorado Springs, CO 80920

Glenn

Job Details: 03/31/2023

"Install New Main Control, Calibration > Failed? Diag Test> Failed? Check Capacitor> OK, ChK Mtr>OK, Techline: Ran Test on PCB, Unit then started Working? Calibration> Pass, Diag Test>Pass. All OPS Test:OK. If problem returns suggest order new Lower Harness, Shifter & Lid Lock Assy. SR#7736079549"

We serviced a

GE DISHWASHER

Model GDT645SYN4FS

Near Elbert, CO 80106

Aaron

Job Details: 03/31/2023

"Drain pump shorted out, replaced and tested unit, draining well now. Advised customer of survey"

We serviced a

SAMSUNG DRYER

Model DVE45B6300C/A3

Near Colorado Springs, CO 80916

Brandon

Job Details: 03/31/2023

Replaced parts and shortened dryer vent line tested op all ok hass passed

We serviced a

SAMSUNG WASHER

Model WF45A6400AV/US

Near Colorado Springs, CO 80916

Brandon

Job Details: 03/31/2023

"7005459851 Samsung submited for replacement due to frame damage, replaced parts tested op all ok hass passed"

We serviced a

JENNAIR COOKTOP

Model JGD3430GS00

Near Peyton, CO 80831

Aaron

Job Details: 03/31/2023

"Replaced switch assembly and tested unit, burners are working well. Tested on low flames with fan on high, no burners extinguished. Advised of 5bstar survey"

We serviced a

MAYTAG DRYER

Model MDE5500AYQ

Near Colorado Springs, CO 80919

Carlos

Job Details: 03/31/2023

Installed listed parts runs all ok

We serviced a

WHIRLPOOL WASHER

Model WFW5620HW3

Near Edgewood, NM 87015

Jason

Job Details: 03/31/2023

"checked unit found f8e1 error for low flow but error was only stored in system one time and can not replicate failure, cx also found detergant dispensor was set for liquid detergant and cx uses powder and was complaining about powder not going out of dispensor. changed dispensor to powder cx to use unit and moniter if changes help wash performance"

We serviced a

KITCHENAID REFRIGERATOR

Model KRMF706ESS01

Near Colorado Springs, CO 80906

Ralph

Job Details: 03/31/2023

installed part and unit chekced ookay...autho no. P3P3R9

We serviced a

MAYTAG WASHER

Model MVW4505MW0

Near Colorado Springs, CO 80919

Carlos

Job Details: 03/31/2023

Customer needed instruction on washer operation. Runs all ok.

We serviced a

WHIRPOOL REFRIGERATOR

Model WRS315SDHZ08

Near Fountain, CO 80817

Carlos

Job Details: 03/31/2023

Installed listed parts. Works all ok. CX will observe.

We serviced a

BOSCH DISHWASHER

Model SHPM88Z75N/20

Near Colorado Springs, CO 80918

Kris

Job Details: 03/31/2023

installed drain pump and water inlet flow meter. ran test op all ok showed cx how to cancel a cycle as well as needing afresh for over sudsing.

We serviced a

KITCHENAID REFRIGERATOR

Model KRFF507HPS00

Near Albuquerque, NM 87120

Larry

Job Details: 03/31/2023

Installed parts listed - unit should be good to go

We serviced a

MAYTAG WASHER

Model MVW4505MW0

Near Grand Junction, CO 81503

James R

Job Details: 03/31/2023

Put into diagnostics test there were no error codes. Put into automatic test. At end of test no error codes. Sounds normal. checked belt is a bit loose. Could here it slip. Replaced W11239857 run again. Op's good. Normal operation. Please fill out whirlpool tech satisfaction survey. Thank You. ; used 1 W11239857 (Belt) from stock

We serviced a

WHIRLPOOL WASHER

Model WTW5010LW0

Near Albuquerque, NM 87120

Larry

Job Details: 03/31/2023

CX complaint - Not draining - Inspected unit and found the wires to rhe drain pump torn - Repaired wires and tested good - Unit is good to go

We serviced a

WHIRLPOOL M/W OTR

Model WMH31017HZ08

Near Albuquerque, NM 87120

Larry

Job Details: 03/31/2023

Installed parts listed and tested good - Unit is good to go

We serviced a

WHIRLPOOL WASHER

Model MVW7232HW0

Near Albuquerque, NM 87120

Larry

Job Details: 03/31/2023

Instlled control and ui and tested good - Unit is good to go

We serviced a

GENERAL ELECTRIC DISHWASHER - BUI

Model GDF535PSR3SS

Near Colorado Springs, CO 80904

Ken

Job Details: 03/31/2023

Could not verify complaint. Dw turns on and operates properly. Advised customer to call in if problem persists

We serviced a

GENERAL ELECTRIC DRYER - ELECTRIC

Model GTD33EASK0WW

Near Colorado Springs, CO 80909

Ken

Job Details: 03/31/2023

Installed button and tested

We serviced a

GE DISHWASHER

Model GTD550PGR0WW

Near Colorado Springs, CO 80916

Ken

Job Details: 03/31/2023

Found pressure switch clogged. Cleaned and tested

We serviced a

WHIRLPOOL M/W OTR

Model WMH31017HZ08

Near Rio Rancho, NM 87144

Joseph

Job Details: 03/31/2023

installed part listed. unit tested good. unit is good to go.

We serviced a

WHIRLPOOL DISHWASHER

Model WDF330PAHS4

Near Rio Rancho, NM 87144

Joseph

Job Details: 03/31/2023

installed parts listed. unit tested good. unit is good to go.

We serviced a

THERMADOR FREEZER

Model T24ID905LP/06

Near Colorado Springs, CO 80921

Kris

Job Details: 03/31/2023

unit needs installers out to replace water line. it is kinked behind unit.

We serviced a

WHIRLPOOL WALLOVEN

Model KOCE500ESS11

Near Rio Rancho, NM 87144

Joseph

Job Details: 03/31/2023

installed parts listed. unit tested good. unit is good to go. extended warranty showing in service bench.

We serviced a

WHIRLPOOL WALLOVEN

Model WOS72EC0HS20

Near Rio Rancho, NM 87144

Joseph

Job Details: 03/31/2023

installed part listed. unit tested good. unit is good to go. unit is in warranty. picture of the invoice is on this ticket.

We serviced a

MAYTAG WASHER

Model MVW5430MW0

Near Colorado Springs, CO 80925

Ken

Job Details: 03/31/2023

Installed parts and tested

We serviced a

PROFILE RANGE

Model JGBS66REK3SS

Near Fountain, CO 80817

Ken

Job Details: 03/31/2023

Installed igniter and tested

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF767SDHZ04

Near Fruita, CO 81521

James R

Job Details: 03/31/2023

Replaced Dampner control asy. Test cycled fan and dampner asy. Op's Good normal operation. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRX735SDHZ07

Near Fruita, CO 81521

James R

Job Details: 03/31/2023

Replaced R.H. F.F. door gasket. Heated so it seals properly. Ok. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

JENNAIR REFRIGERATOR

Model JF42NXFXDE02

Near Colorado Springs, CO 80906

Ralph

Job Details: 03/31/2023

installed listed parts and unirt checked okay

We serviced a

WHIRLPOOL RANGE

Model WFE525S0JZ0

Near Grand Junction, CO 81506

James R

Job Details: 03/31/2023

"Replaced Control,Sensor and bake element. Made sure all functions work. Set to 350 degrees Op's ok. checked broil op's ok. Please fill out whirlpool tech satisfaction survey. Thank You."

We serviced a

WHIRLPOOL WASHER

Model WTW7500GC2

Near Colorado Springs, CO 80920

Glenn

Job Details: 03/31/2023

"Install New Gearcase, Clutch, Slider Kit & Spanner Nut. All OPS Test:OK, No Leaks."

We serviced a

WHIRLPOOL DISHWASHER

Model WDF330PAHW4

Near Albuquerque, NM 87104

Larry

Job Details: 03/31/2023

CX complaint - DW no power - Inspected unit and found L1 pit at the board loose drom connector - Secured connection and tested good - Unit is good to go

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS321SDHV08

Near Colorado Springs, CO 80911

Carlos

Job Details: 03/31/2023

Installed listed parts. Runs all ok.

We serviced a

GE M/W OTR

Model JVM3160RF8SS

Near Frisco, CO 80443

Erik

Job Details: 03/31/2023

installed tested - GOODJOB COMPLETE!

We serviced a

KITCHENAID MICROWAVE

Model KOCE500ESS20

Near Colorado Springs, CO 80927

Jerimiah

Job Details: 03/31/2023

"Installed replacement appl mgr and humidity sensor. Tried another bag of popcorn. Sensor partially worked, then tried another bag on timed and unit worked. Cust will keep track of functionality. Unit check ok ."

We serviced a

KITCHENAID DISHWASHER

Model KDPE334GPS0

Near Vail, CO 81657

Antonio

Job Details: 03/31/2023

installed new despenser uint tested good

We serviced a

WHIRLPOOL DRYER - ELECTRIC

Model NED4655EW1

Near Gypsum, CO 81637

Antonio

Job Details: 03/31/2023

installed new term block and cord unit tested good

We serviced a

SAMSUNG DISHWASHER

Model DW80R9950UG/AA

Near Fountain, CO 80817

Brandon

Job Details: 03/31/2023

Replaced parts tested op all ok hass passed

We serviced a

SAMSUNG REFRIGERATOR

Model RS27T5200SR/AA

Near Colorado Springs, CO 80921

Brandon

Job Details: 03/31/2023

Replace door took pictures customer approved tested op all ok hass passed

We serviced a

SAMSUNG REFRIGERATOR

Model RF28JBEDBSR/AA

Near Calhan, CO 80808

Jonny

Job Details: 03/31/2023

"Installed parts , hass passed, gave custy fridge education"

We serviced a

SAMSUNG WASHER

Model WF-J1254/XAA

Near Colorado Springs, CO 80904

Jonny

Job Details: 03/31/2023

"Noticed washer wasn't draining, didn't see error code, it's a 2007 unit so no self diagnostic or hass, used shop vac to unclog drainhose, needs drain pump assyDrain pump assy dc96-01336h 231.60Tax 18.99Sf 129.95 14.50 Labor 159.95 Autho#4p9c3pCusty wants to thnk on it"

We serviced a

DACOR WALL OVEN

Model HW0230PS

Near Colorado Springs, CO 80906

Ralph

Job Details: 03/31/2023

reinstalled unit nchecked okay

We serviced a

SAMSUNG REFRIGERATOR

Model RF28HFEDBBC/AA

Near Colorado Springs, CO 80919

Jonny

Job Details: 03/31/2023

"Installed parts, fridge is operawtionalAutho#w3xn99"

We serviced a

SUBZERO REFRIGERATOR

Model BI-36U

Near Colorado Springs, CO 80906

Ralph

Job Details: 03/30/2023

"cust may have left freezer door ajar and alarm was going off, autho no. 9J39UH"

We serviced a

GE DISHWASHER

Model GDT630P0RFS

Near Colorado Springs, CO 80919

Ralph

Job Details: 03/30/2023

"unit is leaking from the heater nuts, going to repalce the heater and the nuts, did not reinstall theunit tdue to the mounting device cust has lost its adhesive so the unit willnot install to the top of the granite counter top, if cust has another tech out to install parts wanted to let them know. parts heater WD05X30818 $85.62, nuts x2 (WD01X10070) $13.13, cust paying sc t0day...cust paid sc autho no. M9YWJJ"

We serviced a

WOLF VENT HOODS

Model PWC542418

Near Colorado Springs, CO 80906

Ralph

Job Details: 03/30/2023

"unit has either a faulty motor or the squirrel cage is rubbing on something, although, this motor is on the roof, which is not an area that we work on product, cust to call subzero and CMR."

We serviced a

SAMSUNG REFRIGERATOR

Model RF263BEAESR/AA

Near Colorado Springs, CO 80919

Jonny

Job Details: 03/30/2023

"Installed parts, 2013 so not hass compatible, custy is happynto have ice soon"

We serviced a

WHIRLPOOL DISHWASHER

Model WDF330PAHB4

Near Colorado Springs, CO 80907

Carlos

Job Details: 03/30/2023

Test op. Runs ok. Loose wiring in Circ. Pump. Runs all ok.

We serviced a

WHIRLPOOL MICROWAVE

Model N/A

Near Colorado Springs, CO 80910

Carlos

Job Details: 03/30/2023

Needs ring motor at bottom of microwave. Customer will not repair $149.44 CC Auth# C3A9P9; (serial indicated as 'NotAvailable' so system created UIS w/pseudo #)

We serviced a

CAFE DISHWASHER

Model CDT875P2N7S1

Near Edwards, CO 81632

Erik

Job Details: 03/30/2023

spring rubbing on cab - level unit and wrap insulation (un-bunched) around tub and reinstall - test: NO NOISE!JOB COMPLETE!

We serviced a

FRIGIDAIRE MICROWAVE

Model 318279512B

Near Colorado Springs, CO 80909

Jerimiah

Job Details: 03/30/2023

"Microwave not heating, not spinning no noise, timer only counts down. Switches needed replacing. Done, unit check ok, charged sc labor parts $398.10 chk#14515304493153 primary 5303319559 monitor ; used 2 Microswitch from stock"

We serviced a

KITCHENAID MICROWAVE

Model KEMC308KSS04

Near Colorado Springs, CO 80921

Jerimiah

Job Details: 03/30/2023

"Installed light trans but light was burned out. Replaced light as well. Unit check ok, charged labor. $169.95 CC Auth# R44CRK"

We serviced a

JENNAIR RANGE

Model JGRP548WP01

Near Colorado Springs, CO 80921

Jerimiah

Job Details: 03/30/2023

"Did the check that Techline was suggest, verify that hv lines are separated from the data lines. Yes. Techline deemed unit repairable. As instructed called AIG in next step which I was directed to call claims special number. Gave info to them with SR#. Was instructed to tell Cust to call to cancel and refund warranty renewal due to replacement clause. SR#77336863247735818442 service req. new 7733651096 (AIG. Notes)"

We serviced a

VIKING DOWNDRAFT VENT

Model VGRT48-4GSS NA

Near Colorado Springs, CO 80908

Jessie

Job Details: 03/30/2023

"- found broken wires to the vent control, replaced broken wires.- unit has a bad lift motor. verified 120v.- customer will need to get the false wall removed and send us a model tag to see if parts are available for vent."

We serviced a

SAMSUNG DRYER ELECTRIC

Model DV50F9A7EVP/A2

Near Pueblo West, CO 81007

Brandon

Job Details: 03/30/2023

"Found idler pulley worn out with groove in middle and melted, cleaned back rollers and idler pulley, recommend replacing pulley Dc96-00882c and belt 6602-001655 checked all sensors and heater all good. Cx declined repair at this time but will let us know. Collected svf $129.95 Auth# H9V9TYSvf $129.95 Labor $149.95Parts $187.00Tax $15.33Mps $14.50"

We serviced a

GE RANGE

Model PTD70EBPT0DG

Near Avon, CO 81620

Erik

Job Details: 03/30/2023

installed/tested/GOODJOB COMPLETE

We serviced a

GE DISHWASHER

Model GDF640HSM2SS

Near Vail, CO 81657

Erik

Job Details: 03/30/2023

needs GFCI breaker replacement - test unit with smartHQ service - GOODJOB COMPLETE!Autho#

We serviced a

WHIRLPOOL DISHWASHER

Model WDF310PLAW4

Near Rifle, CO 81650

James R

Job Details: 03/30/2023

hooked up to pwr. lights up but cant start unit. start button doesnt work.Removed control panel tried to activate still wont. Faulty control. They will replace unit. customer paid service call $149.00 auth code M9N349Please fill out whirlpool tech satisfaction survey. Thank you.

We serviced a

WHIRLPOOL RANGE

Model WGG745S0FS02

Near Monument, CO 80132

Glenn

Job Details: 03/30/2023

"Lower Front Door Glass broken (Shattered)Install New Lower Front Door Glass, All OPS Test:OK"

We serviced a

MAYTAG WASHER

Model MVWB766FW1

Near Monument, CO 80132

Glenn

Job Details: 03/30/2023

"Install New Glass Lid, All OPS Test:OK"

We serviced a

MAYTAG DRYER

Model MED7230HW3

Near Pueblo West, CO 81007

James

Job Details: 03/30/2023

Installed ordered parts all ops test good

We serviced a

HOTPOINT DISHWASHER

Model HDF330PGR3WW

Near Rifle, CO 81650

James R

Job Details: 03/30/2023

Here on whirlpool unit. Took a look at this unit. Drain under sink completely plugged. Cleaned out now unit drains properly. op's good. customer paid service call $109.00 auth code 9RJ44M

We serviced a

KITCHENAID DISHWASHER

Model KDFE104KPS0

Near Fraser, CO 80442

Antonio

Job Details: 03/30/2023

insta;;ed new door seal unit tested good

We serviced a

WHIRLPOOL DRYER

Model WED8127LW1

Near Larkspur, CO 80118

Glenn

Job Details: 03/30/2023

"Blower wheel was cracked and had to break wheel off to get to threaded nut, before I could install New Blower. All OPS Test:OK"

We serviced a

JENNAIR REFRIGERATOR

Model JS48NXFXDE01

Near Monument, CO 80132

Glenn

Job Details: 03/30/2023

Replace LED Modules in FF & FRZR All Lights Now working.

We serviced a

WHIRLPOOL WASHER

Model WTW4816FW2

Near Albuquerque, NM 87113

Larry

Job Details: 03/30/2023

Installed spin basket and tested good - Unit is good to go

We serviced a

SAMSUNG REFRIGERATOR

Model RF28K9380SR/AA

Near Colorado Springs, CO 80921

Jonny

Job Details: 03/30/2023

"Installed partsn, hass passed, unit will have ice in 24 hiurs"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRT314TFDW03

Near Cascade-Chipita Park, CO 80809

Ralph

Job Details: 03/30/2023

installed parts cust to monitor

We serviced a

MAYTAG RANGE

Model MER7700LZ0

Near Fraser, CO 80442

Antonio

Job Details: 03/30/2023

installed new element and fuse

We serviced a

WHIRLPOOL COOKTOP

Model WCG55US6HS00

Near Elbert, CO 80106

Glenn

Job Details: 03/30/2023

"Install New Manifold Assy & Switch Harness.All OPS Test:OK, No Gas Leaks."

We serviced a

SAMSUNG WASHER

Model WF45R6100AC/US

Near Colorado Springs, CO 80924

Jonny

Job Details: 03/30/2023

"7005456896, saw counter weight broken and called techline for 7000 number, custy will be getting new unit bcuz this one is unrepairable"

We serviced a

MAYTAG DRYER

Model MEDC465HW0

Near Albuquerque, NM 87109

Larry

Job Details: 03/30/2023

Installed parts listed and tested good - Unit is good to go

We serviced a

MAYTAG WASHER

Model MHW5630HC3

Near Albuquerque, NM 87109

Larry

Job Details: 03/30/2023

Installed parts lsited and tested good - Unit is good to go

We serviced a

KITCHENAID DISHWASHER

Model KDTE234GPS0

Near Colorado Springs, CO 80921

Glenn

Job Details: 03/30/2023

"Customer didnt realize DW door was open and walked into door, causing mis-alignment.Right side skipped a peg and door needs to be corrected at hinge. Corrected door hinge alignment. All OPS Test:OK, Paid SC Fee & LAbor, Total 199.90, Autho#9C33LX"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRX735SDHZ

Near Fountain, CO 80817

Carlos

Job Details: 03/30/2023

"Test op. Ran diagnosis in dispenser, water valves and ice maker. Found debris in dispenser button. All works OK."

We serviced a

WHIRLPOOL WASHER

Model MHW6630HW0

Near Silt, CO 81652

James R

Job Details: 03/30/2023

Put into diagnostics F0E2 over sudsF5E2 lock failure. Lock does seem to work.F0E5 off balanced loadcleared all codes activated test 12 unit will not agitate or spin. Door does lock and unlock.checked harness at ACU to motor 15.2 ohms across all of the windings. So the motor is good. ACU is faulty. W11322883 total estimate to repair. $626.78 customer paid service call $149.00 auth code HU4X99

We serviced a

KITCHENAID REFRIGERATOR

Model KRMF706ESS05

Near New Castle, CO 81647

James R

Job Details: 03/30/2023

Replaced dual water valve and Ice Box fan. Test op's water dispense and ice maker water fill. Op's good. Test op's of ice box fan op's good. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

WHIRLPOOL WALLOVEN

Model WOC54EC0HS20

Near Colorado Springs, CO 80924

Aaron

Job Details: 03/30/2023

"Control panel not responding correctly. Replaced assembly and customer tested, working well now. Advised of 5 star survey"

We serviced a

WHIRLPOOL WASHER

Model WTW8127LC0

Near Colorado Springs, CO 80925

Carlos

Job Details: 03/30/2023

Customer has a warranty from assurant and will send a new work order

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS325SDHZ08

Near Colorado Springs, CO 80924

Aaron

Job Details: 03/30/2023

"Left foam insulation used to support front condenser worn away from vibration, condenser coil vibrating along the frame of the unit, corrected and cleaned condenser, operating well now. Advised of 5 star survey"

We serviced a

MAYTAG DRYER

Model MEDC465HW0

Near Colorado Springs, CO 80915

Carlos

Job Details: 03/30/2023

Test opp found bad element . Installed listed parts.

We serviced a

WHIRLPOOL WASHER

Model MVW6200KW2

Near Fountain, CO 80817

Ken

Job Details: 03/30/2023

Installed cap and tested. Machine is spinning and agitating properly

We serviced a

WHIRLPOOL M/W OTR

Model WMH32519HW2

Near Albuquerque, NM 87109

Larry

Job Details: 03/30/2023

CX Complaint - MW light stays on - Inspected unit and found the light relay is stuck closed - Unit needs a new control - CX doesn't want bear the cost of repair and will replace - Collected $140.18-Auth-YFL9LETrip- $129.95Control - $206.50Labor - $149.95Tax - $38.32Total - $524.96

We serviced a

WHIRLPOOL WASHER

Model WTW5010LW0

Near Basalt, CO 81621

James R

Job Details: 03/30/2023

"replaced belt,drive pulley and shield. test cycle good. Please fill out whirlpool tech satisfaction survey. Thank You."