Service History 278 - D3 Appliance

We serviced a

GE MICROWAVE

Model JVM1870SF02

Near Colorado Springs, CO 80919

Jerimiah

Job Details: 10/06/2023

"Installed replacement vent cover,unit ch3ck ok charged labor as quoted chk#2432 $169.95 CK Auth# XME43W"

We serviced a

MAYTAG DRYER

Model MEDB835DW3

Near Colorado Springs, CO 80951

Carlos

Job Details: 10/06/2023

Installed repair kit. Runs ok

We serviced a

GE STOVE

Model JGBT308EA4AD

Near Colorado Springs, CO 80907

Roman

Job Details: 10/06/2023

When rang is plugged in the timer button sticker is cracked and broken. The sticker is discontinued. It is the only button thats doing it so recommend getting a separate timer. Tested the oven and all four burners. Range working great. Collected sc $129.95 check $129.95 CK Auth# 9U4M4H I put in the wrong invoice number for this payment.

We serviced a

WHIRLPOOL DRYER

Model WHD560CHW2

Near Colorado Springs, CO 80925

Carlos

Job Details: 10/06/2023

Installed pulley and belt. Runs ok. CX will observe

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS315SDHZ08

Near Colorado Springs, CO 80921

Glenn

Job Details: 10/06/2023

Bad Icemaker & Valve. Install New IM & Valve. All OPS Test:OK

We serviced a

KITCHENAID WALL OVEN

Model KEBI101DBLG

Near Colorado Springs, CO 80921

Glenn

Job Details: 10/06/2023

"Unit stopped working after customer was doing canning. However, Its been a week with unit turned off, and now everything is working as designed. Unable to find model in Service matters, may not have parts avail. any longer. All OPS Test:OK , Paid SC fee of 129.95, Check #4070, Autho#4WT94W"

We serviced a

KITCHENAID RANGE ELECTRIC

Model KDRP407HSS4

Near Colorado Springs, CO 80918

Glenn

Job Details: 10/06/2023

"Found broken connector to TOD. Replace connector.Techline: SR#7737497284 , All OPS Test:OK , Paid SC fee $129.95 + Labor $169.95 + Tip $15.72 = $330.12 , Autho# 4LPXH3"

We serviced a

WHIRLPOOL DRYER ELECTRIC

Model WED7500GC0

Near Fountain, CO 80817

Carlos

Job Details: 10/06/2023

Ran test op adjusted springs on hinges. Ran with load all ok Cx will observe

We serviced a

MAYTAG DRYER

Model MEDB835DW4

Near Fountain, CO 80817

Carlos

Job Details: 10/06/2023

Installed Motor and blower. Ran test op. Did not hear any abnormal noise.

We serviced a

THERMADOR REFRIGERATOR

Model T36IT903NP/14

Near Avon, CO 81620

Erik

Job Details: 10/06/2023

UNIT TRIM INSTALLEDJOB COMPLETE

We serviced a

BOSCH RANGE

Model HIIP057U/05

Near Avon, CO 81620

Erik

Job Details: 10/06/2023

INSTALL SLIDE-DRAWER RAILSJOB COMPLETE

We serviced a

MONOGRAM REFRIGERATOR

Model ZISB48DCA

Near Edwards, CO 81632

Erik

Job Details: 10/06/2023

CX explained that she called in to get a refund for the part cost of the service - Tech explained that parts once installed are non-refundable. CX would like a call from a manager/ superviser

We serviced a

BOSCH MICROWAVE

Model HMCP0252UC/05

Near Vail, CO 81657

Erik

Job Details: 10/06/2023

install/ test: no arc/ heat 1 cup water in 1 minJOB COMPLETE

We serviced a

MAYTAG WASHER

Model MHW6630HW3

Near Colorado Springs, CO 80924

Aaron

Job Details: 10/06/2023

"F5E2 lid lock error code upon arrival, accumulated soap and dirt debris between Inner and outer tub, dispenser drawer clean, customer states they have used the 'clean washer' cycle several times. Discussed situation with techline and sent attached photos. Recommend several Affresh cleaning cycles SR7737063727"

We serviced a

KITCHENAID REFRIGERATOR

Model KRMF706ESS01

Near Colorado Springs, CO 80908

Aaron

Job Details: 10/06/2023

"Removed and replaced components, tested evaporator motor in diagnostics, working well now, unit needs time to cool back down. Advised customer of 5 star survey."

We serviced a

MAYTAG WASHER

Model MVW7232HW1

Near Colorado Springs, CO 80908

Aaron

Job Details: 10/06/2023

"F2E2 keypad error code upon arrival, removed and replaced console assembly, programmed and ran unit through DLMS and diagnostic cycles, working well now. Advised customer of 5 star survey."

We serviced a

SAMSUNG REFRIGERATOR

Model RF28HFEDBSG/AA

Near Colorado Springs, CO 80917

Jeremy

Job Details: 10/06/2023

Installed all provided parts. Not HASS compatiable. IM working to the best of my knowledge. Asked CX to complete the survey.

We serviced a

SAMSUNG REFRIGERATOR

Model RF24R7201SR/AA

Near Colorado Springs, CO 80910

Jeremy

Job Details: 10/06/2023

Installed all ordered parts. IM working to the best of knowledge.

We serviced a

MAYTAG DRYER

Model MED4500MW0

Near Colorado Springs, CO 80922

Aaron

Job Details: 10/06/2023

"Thermal cutoff shorted out, replaced cutoff and cycling thermostats, tested and working well now. Advised customer of survey."

We serviced a

WHIRLPOOL RANGE

Model WFG550S0LZ1

Near Colorado Springs, CO 80922

David

Job Details: 10/06/2023

Checked range Cleaned burner portsTested and working good

We serviced a

WHIRLPOOL WASHER

Model WTW4850HW3

Near Colorado Springs, CO 80922

Aaron

Job Details: 10/06/2023

"Water valve solenoid stuck open, removed and replaced valve, tested unit and working well now. Advised customer of 5 star survey."

We serviced a

MAYTAG DRYER

Model MEDB835DW

Near Fountain, CO 80817

Carlos

Job Details: 10/06/2023

Installed repair kit. ran test op all ok

We serviced a

SAMSUNG RANGE

Model NE58R9560WG/AA

Near Colorado Springs, CO 80921

Brandon

Job Details: 10/06/2023

"Replaced pcb and tested op all ok hass failed and wouldn't send, need to bypass, hass not working on unit connects to app but nothing works thru app"

We serviced a

SAMSUNG REFRIGERATOR

Model RF24FSEDBSR/AA

Near Colorado Springs, CO 80921

Brandon

Job Details: 10/06/2023

"Unit leaking in ice room, 40 c error, removed all ice from ice room, sealed Ice room, all components working to spec hass passed"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS321SDHW08

Near Grand Junction, CO 81504

James R

Job Details: 10/06/2023

Replaced icemaker and test cycled. Operation is normal. Also found water leaking down behind fill tube at back wall. Sealed thart area ok. customer signed waiver.Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

SUBZERO REFRIGERATOR

Model IT-36CI-LH

Near Colorado Springs, CO 80907

Jessie

Job Details: 10/06/2023

Replaced evap fan in freezer again. Unit sounds great all ok

We serviced a

MAYTAG REFRIGERATOR

Model MSS25N4MKZ04

Near Grand Junction, CO 81501

James R

Job Details: 10/06/2023

Frz light switch broken. Replaced switch test ok.Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS571CIHZ01

Near Albuquerque, NM 87110

Jason

Job Details: 10/06/2023

Installed Ice maker unit opperation checks ok

We serviced a

GE RANGE - ELECTRIC

Model JS630SF4SS

Near Colorado Springs, CO 80907

Ralph

Job Details: 10/06/2023

installed part and unit checked okay

We serviced a

JENN-AIR COOKTOP

Model JEC3536HB00

Near Grand Junction, CO 81507

James R

Job Details: 10/06/2023

Checked pwr. Removed cover over junction box found black wire not hooked up properly. Reinstalled properly. Put larger wire nuts on black and red wiring. Double checked neutral and grd. were ok. Reinstalled cover. Test operation. Good. Told customer should have a electrician to confirm installation of wiring. Not responsible for anything further. Had customer sign waivers. Customer paid service call. Not covered under warranty. $149.95 auth code. JR3U9NPlease fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

WHIRLPOOL WASHER

Model NTW4519JW2

Near Trinidad, CO 81082

James

Job Details: 10/06/2023

found pulley loose causing noise when running. replaced with preordered cam w10721967 & belt w11239857 tested ops all ckok. left litmus. found linoleum tile damaged on arrival (see sd pics) cust is aware.

We serviced a

MAYTAG WASHER

Model MVW6230HC3

Near Rio Rancho, NM 87124

Larry

Job Details: 10/06/2023

CX instruct - Explained operating - Unit is operating as designed

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS321SDHZ08

Near Albuquerque, NM 87107

Larry

Job Details: 10/06/2023

Installed control and tested good - Unit is good to go

We serviced a

WHIRLPOOL DISHWASHER

Model KDTM404KPS1

Near Tijeras, NM 87059

Jason

Job Details: 10/06/2023

installed drain pump unit checks ok

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF555SDFZ16

Near Fruita, CO 81521

James R

Job Details: 10/06/2023

Replaced icemaker cycled and filled ok. Checked frz temp -1 good F.F. temp 37 degrees good. Unit is cooling properly. The fans she is hearing are the condenser and F.F. area fans and they sound normal. Compressor sounds normal as well. Also adjusted front feet to the floor so the frig wont roll everytime she gets into it. Unit is operating as should. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

WHIRLPOOL DRYER

Model WED8000DW4

Near Colorado Springs, CO 80906

Carlos

Job Details: 10/06/2023

"Installed idler pulley, ran test op. All ok"

We serviced a

WHIRLPOOL WASHER

Model WTW4855HW3

Near Los Lunas, NM 87031

Larry

Job Details: 10/06/2023

Installed valve and tested good - Unit is good to go

We serviced a

KITCHENAID WALLOVEN

Model KOCE500ESS20

Near Monument, CO 80132

Glenn

Job Details: 10/06/2023

"R & R New Turntable motor, adapter, Shaft & Ring. All OPS Test:OK"

We serviced a

SAMSUNG REFRIGERATOR

Model RF28K9070SR/AA

Near Elbert, CO 80106

Brandon

Job Details: 10/06/2023

"Replaced parts and charged unit, temps are dropping fridge got down to temp 37, before I left and freezer lowering hass passed"

We serviced a

GE DISHWASHER

Model DDT700SSN5SS

Near Grand Lake, CO 80447

Erik

Job Details: 10/05/2023

installed/testedJOB COMPLETE

We serviced a

MAYTAG WASHER

Model MVW6500MBK0

Near Rifle, CO 81650

James R

Job Details: 10/05/2023

Printed labels. Took pics ready to send in.

We serviced a

SAMSUNG DRYER

Model DVE45T6000W/A3

Near Colorado Springs, CO 80908

Mathew

Job Details: 10/05/2023

Replaced door. Test op all okay. Unit not compatible with hass wireless.

We serviced a

WHIRLPOOL DRYER

Model WED8127LC1

Near Pueblo, CO 81005

David

Job Details: 10/05/2023

Checked dryer Ran through diagnostics no faults Good air flow from dryer Not very good at outside vent Recommend having vent professionaly cleaned

We serviced a

SAMSUNG DISHWASHER

Model DW80K5050US/AA

Near Colorado Springs, CO 80923

Mathew

Job Details: 10/05/2023

"Unit needs a motor assembly. Called Samsung, they said they would send us another ticket to order parts if approved. Need sump assy. DD82-01353A. Did not run hass as unit is inoperable."

We serviced a

KITCHENAID REFRIGERATOR

Model KRFF577KPS02

Near Colorado Springs, CO 80920

Mathew

Job Details: 10/05/2023

"Replaced evap and damper motor. Test op, unit working as expected."

We serviced a

SAMSUNG WASHER

Model WF330ANW/XAA 02

Near Colorado Springs, CO 80907

Jeremy

Job Details: 10/05/2023

CX claims to have smelled a burnt smell coming from inside of drum after cycle completed. Stacked unit. I ran rinse and spin cycle. No noticable smells. Drum doesnt spin by hand very easily. I inspected the bearing from the back and it looks good. Im covinced that the inside bearing is going out and heating up creating the smell. The suspension is also bad. The unit is over 10 years old . I told CX a round about price of the repair and cx will probably buy new unit.

We serviced a

GE MICROWAVE

Model JVM3160RF8SS

Near Colorado Springs, CO 80923

Jerimiah

Job Details: 10/05/2023

"Installed replacement control panel assy, unit check ok."

We serviced a

BOSCH WALLOVEN

Model HBL8451UC/02

Near Colorado Springs, CO 80918

Jerimiah

Job Details: 10/05/2023

"Installed replacement gasket. Unit check ok, charged labor as quoted $189.95 CC Auth# 33TT4N"

We serviced a

MAYTAG DRYER

Model MDE9316AYW

Near Colorado Springs, CO 80918

Mathew

Job Details: 10/05/2023

"Replaced burnt out door switch, unit still not working. Power is getting to timer, start switch test ok. Called tech line, they suspect wire harness failure. Part NLA. $179.95 CC Auth# AHTR94"

We serviced a

SAMSUNG DRYER

Model DVE45T3400W/A3

Near Colorado Springs, CO 80907

Brandon

Job Details: 10/05/2023

"Bad thermostat, replaced parts and tested op all checks ok hass passed"

We serviced a

KITCHENAID REFRIGERATOR

Model KRMF606ESS01

Near Pueblo, CO 81005

David

Job Details: 10/05/2023

"Checked refrigerator and icemaker Ran diagnostics, ice box fan running, pulled evap cover, evap has full frost pattern, air channels seem to be clear.Freezer was very full and was possibly not fully closing Service fee good for 30 days"

We serviced a

SAMSUNG REFRIGERATOR

Model RF28K9380SG/AA

Near Colorado Springs, CO 80916

Jeremy

Job Details: 10/05/2023

Installed all provided parts. Ran HASS. IM working to the best of my knowledge. I asked CX to complete the survey.

We serviced a

SPEEDQUEEN DRYER

Model ADEE9RYS177TW01

Near Peyton, CO 80831

Kris

Job Details: 10/05/2023

drum was binding causing error code could not get pic of code. pulled unit apart made sure all parts were not binding. ran test op all ok unit is working to spec at this time.

We serviced a

SAMSUNG REFRIGERATOR

Model RF263TEAESG/AA 04

Near Colorado Springs, CO 80925

James S

Job Details: 10/05/2023

"Replaced ice maker, auger Assembly, T clips, and PCB MAIN. Could not run HAAS.Tested for proper operation."

We serviced a

GE STACK UNIT

Model GUD24ESSJ0WW

Near Colorado Springs, CO 80923

Jessie

Job Details: 10/05/2023

Replaced broken suspension. Unit is not hitting the floor anymore. Unit is going into spin. Transmission is very noisey. If customer wants the repair they will get back to us.

We serviced a

GENERAL ELECTRIC DRYER

Model PTD60EBPR0DG

Near Colorado Springs, CO 80915

Roman

Job Details: 10/05/2023

Not squeaking super loudly but sounds off. Took it apart and the top bearing bracket was not clipped in on either side. Little bits of felt were smushed and not in the grooves they are supposed to be in. Put the dryer back together and did not hear the noise again. If noise comes back recommend to customer letting the dryer break in.

We serviced a

SAMSUNG ELECTRON DISHWASHER

Model DW80R9950UG/AA

Near Monument, CO 80132

Brandon

Job Details: 10/05/2023

"Replaced parts and tested op all ok smart Install passed, installed litmus"

We serviced a

WHIRLPOOL RANGE

Model WGE745C0FS01

Near Pueblo, CO 81008

David

Job Details: 10/05/2023

"Checked range Put into diagnostics, no codes Ran ovens through cycles and oven is going into clean All working good Took pics of the papers they have."

We serviced a

SAMSUNG REFRIGERATOR

Model RF28R7201SR/AA

Near Colorado Springs, CO 80925

Jeremy

Job Details: 10/05/2023

Installed new defrost sensor and evap cover. Refridgerator seem to be operating correctly. CX paid $81.56 Cash

We serviced a

MAYTAG REFRIGERATOR

Model MSS25N4MKZ04

Near Colorado Springs, CO 80904

Carlos

Job Details: 10/05/2023

7737493054 Installed compressor and evaporator. Frost patter present when charged. Cx will observe

We serviced a

KITCHENAID DISHWASHER

Model KUDP01ILWH6

Near Colorado Springs, CO 80907

Carlos

Job Details: 10/05/2023

"Installed heater. Ran test op, checked for leaks left leak strip all ok"

We serviced a

WHIRLPOOL DRYER

Model MED5630HC1

Near Colorado Springs, CO 80919

Glenn

Job Details: 10/05/2023

"Not heating.Unit full of lint, Bad Element & ThermostatsElement - WP3387747 $99.68 , Thermostat Kit - 280148 $82.26 , MPS $14.50, Tax $14.92 , Labor $199.95 , Paid in Full $561.26 , Autho# 9X3VHV"

We serviced a

KITCHENAID DISHWASHER

Model KDTM704KPS1

Near Colorado Springs, CO 80908

Kris

Job Details: 10/05/2023

istalled handle ran test op all ok unit is working to spec at this time.

We serviced a

WHIRLPOOL WASHER

Model MVWB765FW3

Near Colorado Springs, CO 80910

Roman

Job Details: 10/05/2023

"Installed new control board and washer lit up. Tested it and it fills, agitates, drains and spins. Washer working great."

We serviced a

BEST DOWNDRAFT VENT

Model D49M36BLS

Near Manitou Springs, CO 80829

Roman

Job Details: 10/05/2023

Installed new control board and made sure the hood and fan both working properly. Vent working great.

We serviced a

BOSCH REFRIGERATOR

Model B36CT80SNS/09

Near Colorado Springs, CO 80906

Roman

Job Details: 10/05/2023

Removed handles and door gasket and installed it on the new door. Made sure fridge door is closing properly. Door working great.

We serviced a

BOSCH DISHWASHER

Model SHV65P03UC/63

Near Colorado Springs, CO 80918

Jessie

Job Details: 10/05/2023

Replaced valve. Tested unit for leaks.

We serviced a

SAMSUNG DRYER

Model DVE50R5200W/A3

Near Colorado Springs, CO 80924

Brandon

Job Details: 10/05/2023

Replaced moving parts and tested op all ok hass passed

We serviced a

DACOR WALL OVEN ELECTR

Model RO230S

Near Colorado Springs, CO 80906

Jerimiah

Job Details: 10/05/2023

"U20 error over temp on upper oven, techline says relay board needs replacing. Labor will be $199.95 upon return service. Board is not available and Cust will look into finding part himself. Charging service call $149.00 CK Auth# P4C34A chk#11219DE81-05671A relay board NLA"

We serviced a

THERMADOR INDUCTION COOKTO

Model CIT36YWBB/01

Near Larkspur, CO 80118

Jessie

Job Details: 10/05/2023

Replaced top. Looks good all ok

We serviced a

KITCHENAID DISHWASHER

Model KDFE204KPS1

Near Elbert, CO 80106

Aaron

Job Details: 10/05/2023

"Circulation motor is weak, removed and replaced sump assembly, corrected unit install mounting tabs, tested unit and working well now. Advised customer of 5 star survey."

We serviced a

JENN-AIR REFRIGERATOR

Model JF42NXFXDE02

Near Colorado Springs, CO 80906

Carlos

Job Details: 10/05/2023

Installed LED lights. All ok.

We serviced a

JENN-AIR WALLOVEN

Model JJW3430DP02

Near Larkspur, CO 80118

Glenn

Job Details: 10/05/2023

"Install New Console, Program to model. All OPS Test:OKPaid remaining SC Fee $149.95 + MPS $14.50 + Labor $209.95 = $374.40 , Autho# AW3L44"

We serviced a

KITCHENAID REFRIGERATOR

Model KRMF706ESS04

Near Monument, CO 80132

Glenn

Job Details: 10/05/2023

"Customer indicates, that water had began to collect around bucket seal to IM & around / under IM face. Also noticed frost buildup in Freezer top drawer. They since turned off the ice maker. No Frost Buildup on either evap. Water hold test on flapper > Failed.Test 56 > No IM Error Codes, Harvest > Pass , Fill Test > Pass. No excessive water? Bucket door seal looks ok, All Door seals < OK, All Fans working. Techline: Possible Bad IM Fan Motor - W10846539 $200.62 + Tax , Most likely freezer door did not close 100% causing frost prob. All OPS Test:OK at this time. Leaving Deli UI disconnected for now. customer will continue to monitor. Placed a cup under dispenser to remind customer to check its status. SR# 7737491992"

We serviced a

KITCHENAID DISHWASHER

Model KDTE234GWH0

Near Colorado Springs, CO 80917

Glenn

Job Details: 10/05/2023

"Bad Wash motor assy.Sump & Motor Assy - W11665769 $217.94 , Tax $17.87 , MPS $14.50 , Labor $319.95 , Declined Estimate. Paid SC fee of $129.95 , Check #4968 , Autho#3WHTUL"

We serviced a

GE DRYER

Model GTD86ESSJ0WS

Near Colorado Springs, CO 80924

Kris

Job Details: 10/05/2023

cleaned out unit for cx.

We serviced a

SAMSUNG REFRIGERATOR

Model RF23R6201SR/AA 53

Near Colorado Springs, CO 80908

Brandon

Job Details: 10/05/2023

"Replaced parts and tested op all checks ok, ice maker cycled ,sealed ice room"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF767SDHZ00

Near Carbondale, CO 81623

James R

Job Details: 10/05/2023

Replaced all lights per S191AQ Operation normal. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

KITCHENAID WALLOVEN

Model KEMS307GBS0

Near Colorado Springs, CO 80918

Glenn

Job Details: 10/05/2023

"Install New Door Hinges. Allowed customer to clean glass panes during repair process. All OPS Test:OKDoor now staying closed on its own, and lights now turns off.Customer had to leave in a hurry, unable to sign after completion."

We serviced a

MIELE RANGE

Model HR1124-3G

Near Colorado Springs, CO 80923

Kris

Job Details: 10/05/2023

ran test op found ignitor was shorted reseated ran test op all ok unit is working to spec at this time.

We serviced a

WHIRLPOOL RANGE

Model WFE515S0JS3

Near Carbondale, CO 81623

James R

Job Details: 10/05/2023

checked unit per service pointr W11525530Removed cover over terminal block. Unplugged unit checked cord for correct installation. Ok. checked L1 L2 for continuity to grd and neutral open circuit good. Polarity is correct. Pwr coming in is 214 vac good. doest pop breaker when plugged in but not on. turned on bake on 9.3 amp draw. Broil 13.2 213 vac with unit on bake. good.Bake element 23.5 ohms good and not to grd. Broil 16.7 ohms good and is not to grd. customer signed waiver. Left infomation with customer on findings of unit and that it is operating as should. Also contact information of the breaker. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

MAYTAG WASHER

Model MVW4505MW0

Near Albuquerque, NM 87110

Jason

Job Details: 10/05/2023

installed valve unit opperation checks ok

We serviced a

WHIRLPOOL WASHER

Model WTW4955HW2

Near Cañon City, CO 81212

James

Job Details: 10/05/2023

Installed ordered parts tested spin and agitate both test good. could not test water because unit in garage with no supply. all mech functions test good

We serviced a

COVE DISHWASHER

Model DW2450

Near Cañon City, CO 81212

James

Job Details: 10/05/2023

installed ordered parts tested ops all ckok

We serviced a

WHIRLPOOL WASHER

Model MHWE300VW12

Near Carbondale, CO 81623

James R

Job Details: 10/05/2023

Replaced bellows. Test run checked for a leak none. Customer paid service call $149.95 auth code 3R3EM3Customer signed waivers. Put leak board under unit. Please fill out whirlpool tech satisfaction survedy. Thank You.

We serviced a

BOSCH FRENCH DOOR REFR

Model B36FD50SNS/01

Near Cañon City, CO 81212

James

Job Details: 10/05/2023

found rear panel not fully seated causing ice to buildup near evap fan. cleared ice and tested. Ops test good.

We serviced a

MAYTAG WASHER

Model MVW6500MBK0

Near Glenwood Springs, CO 81601

James R

Job Details: 10/05/2023

Could hear something in the control. Replace ok. Also the belt was loose could hear a squeak. Replaced and test ok. Could hear rattling Tech service pointer W11695259 adjusted bottom and side of panels so contact good of rear panel ran in spin ok. Also it is normal for drain hose to shake during the spin cycle it is attached to the back panel and tub so as the tub shake so will hose. Put straps on to minimise noise. Customer signed waivers. Please fill out whirlpool tech satisfaction survey. Thank You.; used 1 WPW10006384 (Belt (Washer)) from stock

We serviced a

MAYTAG DISHWASHER

Model MDB8959SKZ0

Near Glenwood Springs, CO 81601

James R

Job Details: 10/05/2023

Put into drain could here nothing pump not coming on. Removed unit and replaced drain pump. Reinstalled unit and test in service diagnostics. Cleared F9E1 code. Went thru just fine no error codes when finished. Put a leak board under unit. Operation normal. Customer signed waivers. Please fill out whirlpool tech satisfaction survey. Thank You

We serviced a

WHIRLPOOL WASHER

Model WTW4816FW2

Near Albuquerque, NM 87109

Jason

Job Details: 10/05/2023

installed capacitor unit checks ok

We serviced a

MAYTAG WASHER

Model MVW4505MW0

Near Rifle, CO 81650

James R

Job Details: 10/05/2023

Put into drain and spin not shifting and just hums when agitates or spins. Replaced actuator and capacitor. Test again. Operation is normal. Operating as should. Customer signed waiver. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS321SDHZ08

Near Albuquerque, NM 87112

Jason

Job Details: 10/05/2023

"installed diffuser, unit opperation checks ok"

We serviced a

MAYTAG WASHER

Model MVW7232HW1

Near Albuquerque, NM 87112

Jason

Job Details: 10/05/2023

installed strike also found rotor had come loose. tightened rotor bolt up unit checks ok

We serviced a

MAYTAG WASHER

Model MVW6230HW3

Near Albuquerque, NM 87111

Jason

Job Details: 10/05/2023

checked unit found cam was worn installed cam unit checks ok; used 1 w10721967 (cam) from stock

We serviced a

SAMSUNG REFRIGERATOR

Model RF28R7351SG/AA

Near Penrose, CO 81240

James

Job Details: 10/05/2023

installed ordered parts tested ops all ckok ran hass and sent report

We serviced a

KITCHENAID DISHWASHER

Model KDFE104KPS0

Near Grand Lake, CO 80447

Antonio

Job Details: 10/05/2023

Installed new door seal unit tested good

We serviced a

GE REFRIGERATOR/TOP

Model GDE21EGKURWW

Near Colorado Springs, CO 80916

Roman

Job Details: 10/05/2023

"Showed up and they had a bin full of ice, had another guy come out through warranty, and he did some things to the fridge. Cx found a part in the bin and it doesnt look like anything to do with an ice maker. Did not install ice maker."

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS315SDHZ08

Near Fraser, CO 80442

Antonio

Job Details: 10/05/2023

adjusted the condencer from vibrating unit tested good

We serviced a

KITCHENAID REFRIGERATOR

Model KSSS48QHB00

Near Woodland Park, CO 80863

Ralph

Job Details: 10/05/2023

made an adjustment to the fan blade cust to monitor

We serviced a

WOLF WALL OVEN

Model SO3050TE/S/T

Near Woodland Park, CO 80863

Ralph

Job Details: 10/05/2023

"replaced cooling fan and seems to have fixed the issue, board was not correct board...Amy 1 hr on this job please"

We serviced a

MAYTAG WASHER

Model MVWX655DW1

Near Albuquerque, NM 87121

Larry

Job Details: 10/05/2023

Installed control and tested good - Unit is good to go