Service History 310 - D3 Appliance

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF535SMHZ02

Near Peyton, CO 80831

Aaron

Job Details: 05/01/2023

"Control is not responding to the UI, settings are at 7 for freezer (coldest), and 4 for refrigerator, temperatures at time of inspection are 1f for freezer and 39.5f for RC, explained to customer how the airflow for the refrigerator works, top back will be coldest area. Wpw10503278 $232.84Tax $19.09Supplies $14.50Hc $129.95Labor $169.95Total job $566.33Approved on site , replaced board and programmed, left settings at 4 and advised customer, confirmed that settings can be adjusted. No return on partsAuth total due $566.33 #3MK3TP"

We serviced a

KITCHENAID WALLOVEN

Model KODE500ESS20

Near Colorado Springs, CO 80908

Aaron

Job Details: 05/01/2023

"Customer states that the unit works fine for quick cooks like pizza etc, has trouble for longer cooks, stated that unit would not go past 365f, tested upper and lower ovens at 400f, upper oven avg temp 376f and lower 393f after 45 minutes of heating, called techline and calibrated upper oven 20 degrees. Unit is working well, blower pushing well, advised customer of calibration."

We serviced a

KITCHENAID RANGE

Model KSDB900ESS5

Near Grand Junction, CO 81507

James R

Job Details: 05/01/2023

Replaced slides and drawer. Slides in and out normally. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

SAMSUNG REFRIGERATOR

Model RF4287HARS/XAA

Near Pueblo West, CO 81007

James

Job Details: 05/01/2023

"Installed ordered part, de-iced defrost drain. Tested ops all ckok. Left litmus (see sd pics)"

We serviced a

MAYTAG WALLOVEN

Model MEW9530DS00

Near Grand Junction, CO 81507

James R

Job Details: 05/01/2023

No pwr. removed control panel. checked thermal fuse it is blown. jumped across and test unit functions bake broil convection op's ok. need to replace fuse and blower. $480.51 plus 298.00 labor to repair. total $778.51 to repair.Paid service call $149.95 auth code 44PCXV

We serviced a

MAYTAG WASHER

Model MED4500MW0

Near Albuquerque, NM 87112

Jason

Job Details: 05/01/2023

checked unit found unit needed calibration re- calibrated unit for wash performance unit checks ok

We serviced a

GE REFRIGERATOR

Model GTE18GTNDRWW

Near Aspen, CO 81611

Erik

Job Details: 05/01/2023

install/test: Rumble is no longer presentJOB COMPLETE!

We serviced a

MIDEA WASHER

Model MLV45N3BWW

Near Pueblo, CO 81003

James

Job Details: 05/01/2023

"Found basket bolts backing out of gc causing basket to wobble. Secured with loctite and tested, ops ckok. Left litmus (see sd pics)"

We serviced a

KITCHENAID REFRIGERATOR

Model KRMF706ESS01

Near Albuquerque, NM 87111

Jason

Job Details: 05/01/2023

checked unit found there was an issue with air folw to condensor corrected issue cx to moniter temps unit seems ok at this time.

We serviced a

GENERAL ELECTRIC WASHER

Model HTW240ASK6WS

Near Colorado Springs, CO 80906

Ken

Job Details: 05/01/2023

Installed lock and tested. Washer is working properly

We serviced a

AMANA REFRIGERATOR

Model ART318FFEW10

Near Albuquerque, NM 87109

Larry

Job Details: 05/01/2023

Installed gaskets and tested good - Unit is good to go

We serviced a

GENERAL ELECTRIC DISHWASHER - BUI

Model GDF550PMR3ES

Near Colorado Springs, CO 80906

Ken

Job Details: 05/01/2023

Inspected drain and made loop under sink to help dw drain properly. Tested and dw operated properly

We serviced a

WHIRLPOOL RANGE

Model WFG550S0LZ4

Near Monument, CO 80132

Glenn

Job Details: 05/01/2023

Bad LS Door Hinge Assy. Install New LS Door Hinge. All OPS Test:OK

We serviced a

JENNAIR COOKTOP

Model JGC7636BS01

Near Monument, CO 80132

Glenn

Job Details: 05/01/2023

Install New Ignitor & Module for RF Burner.All OPS Test:OK

We serviced a

KITCHENAID REFRIGERATOR

Model KRFF507ESS01

Near Colorado Springs, CO 80908

Glenn

Job Details: 05/01/2023

"Install New Icemaker. Error Test> Pass, Cycle Test>Pass, Fill Test>Pass"

We serviced a

BOSCH DISHWASHER

Model SHPM88Z75N/20

Near Colorado Springs, CO 80924

Glenn

Job Details: 05/01/2023

Install New Heat Pump. All OPS Test:OK

We serviced a

MAYTAG WASHER

Model MVWC565FW2

Near Albuquerque, NM 87106

Larry

Job Details: 05/01/2023

Cx complaint - Washer not agitating - Installed parts listed and tested good - Unit is good to go

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS325SDHZ08

Near Colorado Springs, CO 80924

Glenn

Job Details: 05/01/2023

"Install New RS Door, Adjust door. All OPS Test:OK"

We serviced a

SUBZERO REFRIGERATOR

Model 632/02

Near Colorado Springs, CO 80904

Jessie

Job Details: 05/01/2023

"- REPLACED BOTH DOOR GASKETS, REFRIG EVAP AND DRIER, TEST OP, ALL OKUNIT WAS RECOVERED AND THAN CHARGED 5.5 OUNCES"

We serviced a

GENERAL ELECTRIC WASHER

Model PTW600BSRMWS

Near Palmer Lake, CO 80133

Kris

Job Details: 05/01/2023

installed all parts sent ran test op all ok unit is working to spec.

We serviced a

GE REFRIGERATOR

Model DFE29JSDESS

Near Monument, CO 80132

Kris

Job Details: 05/01/2023

installed fan ran test op all ok unit is working to spec at this time cx will monitor unit

We serviced a

WHIRLPOOL M/W OTR

Model WMH31017HS08

Near Colorado Springs, CO 80923

Glenn

Job Details: 05/01/2023

"Install New Control & Bulb, All OPS Test:OK"

We serviced a

MAYTAG WASHER

Model FAV6800AWQ

Near Colorado Springs, CO 80906

Carlos

Job Details: 05/01/2023

"Customer changed their mind on service call, did not want appliance looked at."

We serviced a

WHIRLPOOL WASHER

Model WFW8620HW4

Near Colorado Springs, CO 80906

Carlos

Job Details: 05/01/2023

Cx education. Recirculation pump rinses the clothes. Customer believed a second fill function should take place. Explained to customer that it was not the case. Runs all ok. Recirculation pump runs ok. Customer will monitor.

We serviced a

GENERAL ELECTRIC DRYER - ELECTRIC

Model GTD42EASJWW

Near Colorado Springs, CO 80923

Kris

Job Details: 05/01/2023

house was vacant installed panel ran test op all ok unti is working to spec at this time.

We serviced a

WHIRLPOOL WASHER

Model WTW4855HW2

Near Colorado Springs, CO 80923

Aaron

Job Details: 05/01/2023

"Unit working well at time of inspection, no error codes, ran unit through diagnostic cycle and normal wash, water level sensor filling to appropriate level, no leaks, possible out of balance cycle in rinse. Advised of survey"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF757SDHZ03

Near Peyton, CO 80831

Jessie

Job Details: 05/01/2023

#NAME?

We serviced a

UNKNOWN REFRIGERATOR

Model 736TCI 3

Near Colorado Springs, CO 80903

Ralph

Job Details: 05/01/2023

"unit working correcty at this time, removed some of the lint covering the condenser, and only charging service charge. autho no. UX49A9"

We serviced a

FISHERPAYKEL DISHWASHER

Model D24DCTX9N

Near Manitou Springs, CO 80829

Ralph

Job Details: 05/01/2023

"UNIT WAS HAVING TROUBLE DRAINING, UNIT WAS SET UP SO THAT DRAIN TUBES WERE BOTH GOING TO 'T' THEN INTO THE DRAIN PVC, I REMOVED THE 'T' AND STUCK BOTH HOSES INTO THE DRAIN PVC PIPE, AND UNIT CHECKED OKAY"

We serviced a

ASKO DISHWASHER

Model n/a

Near Colorado Springs, CO 80906

Ralph

Job Details: 05/01/2023

REMOVED GLASS FROM THE DRAIN PUMP AREA UNITN CHECKED OKAY...cust npaid total bill autho no EWNYJY

We serviced a

GE REFRIGERATOR/TOP

Model PWE23KYNGFS

Near Colorado Springs, CO 80906

Ralph

Job Details: 05/01/2023

"replaced listed parts and charged the unit, cust to monitor"

We serviced a

SUB ZERO REFRIGERATOR BOT

Model BI-42UFDID/S/PH

Near Colorado Springs, CO 80906

Ralph

Job Details: 05/01/2023

"installed part and cust to monitor the unit, i also tied down the low voltage wires, so they wont interfere with control functioning"

We serviced a

AMANA DRYER

Model NED4655EW1

Near Colorado Springs, CO 80909

Carlos

Job Details: 05/01/2023

Burned wire in terminal block. Cut and spliced new wire. All ok

We serviced a

MAYTAG WASHER

Model MVW7230HW1

Near Grand Junction, CO 81503

James R

Job Details: 05/01/2023

Put into diagnostics no error codes. Put into spin. normal. Can here some vibration noise. Removed rear panel made sure fit tight to unit cabinet. Put padding on drain tube. put into drain and spin with a load. Sounds much better. op's normal.Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

WHIRLPOOL WASHER

Model WTW8127LC1

Near Grand Junction, CO 81504

James R

Job Details: 05/01/2023

Put unit into diagnostics no error codes. Put into component test spin worked fine. Put load in unit got load wet let agitate and then spin. Load is a bit out of balance not enough to not spin. It is not making any squeaking noise. Am unable to duplicated the issue at this time. checked motor and clutch bolts ok. Stator bolt is tight. checked agitator mounting bolt it is tight. Suspension is good. unbalanced detection ok. Did a DLMS calibration good. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

BOSCH WASHER

Model WFMC5301UC/16

Near Pueblo, CO 81008

James

Job Details: 05/01/2023

Cleared out drain trap and secured loose wire at drain pump. Tested ops all ckok

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF767SDHZ03

Near Albuquerque, NM 87120

Joseph

Job Details: 05/01/2023

Sealed system repair completed. Charged 58g of refrigerant. Let customer know to wait 24 hours for cooling.

We serviced a

SAMSUNG ELECTRON REFRIGERATOR

Model RF27T5201SG/AA

Near Pueblo West, CO 81007

Brandon

Job Details: 05/01/2023

Replaced ice maker reset ice maker it cycled tested op all ok sealed ice room silicone hass passed tests

We serviced a

SAMSUNG DISHWASHER

Model DW80N3030US/AA

Near Florence, CO 81226

Brandon

Job Details: 05/01/2023

"Contacted tech support documneted visual support, Samsung will contact cx"

We serviced a

SAMSUNG DRYER

Model DVE50R5200W/A3

Near Colorado Springs, CO 80923

Jonny

Job Details: 05/01/2023

"Installed part dryer still wouldn't power on, called techline bcuz I noticed it wasn't connected properly, techline said its a installation problem so I took the pcb back out so they wouldn't get charged"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS321SDHZ08

Near Colorado Springs, CO 80920

Jeremy

Job Details: 05/01/2023

Helped KK install new compressor.

We serviced a

WHIRLPOOL RANGE - ELECTRIC

Model WFC150M0EW1

Near Colorado Springs, CO 80911

Carlos

Job Details: 05/01/2023

Installed listed parts. Ran test op. All ok

We serviced a

AMANA WASHER

Model NTW4630YQ0

Near Colorado Springs, CO 80916

Carlos

Job Details: 05/01/2023

"Ran test op, Found codes F7E7- Motor is not reaching adequate RPM- Needs new motor and actuator. Customer will not repair. Cx paid service call $89.95 CC Auth# EX999F"

We serviced a

WHIRLPOOL RANGE

Model WFG550S0LZ1

Near Albuquerque, NM 87121

Larry

Job Details: 05/01/2023

Replaced ignitor and tested good - Unit is good to go

We serviced a

JENNAIR RANGE

Model JDRP436HL01

Near Colorado Springs, CO 80921

Glenn

Job Details: 04/29/2023

R&R New Bullnose (Console Metal)All OPS Test:OK

We serviced a

KITCHENAID REFRIGERATOR

Model KRFF507HBS00

Near Pueblo West, CO 81007

James

Job Details: 04/29/2023

Found comprssor intermittently wobbling as stopping. All measurements check good. Collected 129.95 $129.95 CC Auth# 94W9FK

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF555SDFZ11

Near Colorado Springs, CO 80927

Glenn

Job Details: 04/29/2023

R&R New LS Door. Swap ALL parts off old door. All OPS Test:OK

We serviced a

MAYTAG DRYER

Model MED7230HW2

Near Pueblo West, CO 81007

James

Job Details: 04/29/2023

Installed ordered parts testing operations all check OK. No water hooked to the machine

We serviced a

WHIRLPOOL DRYER

Model LER5636EQ3

Near Pueblo West, CO 81007

James

Job Details: 04/29/2023

Installed ordered parts tested operations all check OK

We serviced a

WHIRLPOOL RANGE

Model WFG320M0BS3

Near Pueblo, CO 81007

James

Job Details: 04/29/2023

Installed ordered part. Tested ops all ckok

We serviced a

GENERAL ELECTRIC DRYER - ELECTRIC

Model GTD42EASJ2WW

Near Pueblo, CO 81008

James

Job Details: 04/29/2023

Sound loose wire at heating element causing unit to not heat secured and tested unit test good

We serviced a

WHIRLPOOL WASHER

Model WTW5057LW0

Near Pueblo, CO 81008

James

Job Details: 04/29/2023

"Installed ordered parts, tested ops all ckok. Left litmus (see sd pics)"

We serviced a

SAMSUNG REFRIGERATOR

Model RF22K9381SR/AA

Near Colorado Springs, CO 80921

Jonny

Job Details: 04/28/2023

"Custy had the hinge covers off and it was alerting the custy hisndoors were open when they were really closed. Custy put them back on and alarm stopped going off. Custy had fridge unplugged until I got here. Ran a forced mode. Evap had frost build up. Got 40c error code, called techline back and ndf told custy to monitor fridge.Autho#49l9ux"

We serviced a

WHIRLPOOL COOKTOP

Model G7CE3635XS01

Near Los Ranchos de Albuquerque, NM 87107

Larry

Job Details: 04/28/2023

CX complaint - Sparking under glass - Inspected unit and could not find any evidence of sharking or arcking - Called Safety Team to document (SR7736261957)

We serviced a

MIELE DRYER

Model TXD160WP

Near Woodland Park, CO 80863

Jessie

Job Details: 04/28/2023

"- connected the mdu and found no error codes. unit filter holder came apart, reasembled, all ok"

We serviced a

WHIRLPOOL WASHER

Model WFW75HEFW0

Near Colorado Springs, CO 80907

Jeremy

Job Details: 04/28/2023

Unit not draining. Drain pump clogged. Took apart pump and cleaned. Ran test cycle. Unit test good. Double checked for leaks. Placed leak detction strip under unit. Service Charge $129.95 Labor $189.95 Total $319.90 Auth: N3YPL4

We serviced a

SAMSUNG ELECTRIC OVEN

Model NE63T8951SS/AA

Near Colorado Springs, CO 80904

Jeremy

Job Details: 04/28/2023

Replaced both PCB's and still getting error code 'C-F0: Main PCB and Sub PBA Communication Error.' I then contacted tech support. TS had me check incoming voltage. Not getting proper voltage to unit. CX is advised to contact electrician. Cant run HASS due to incorrect incoming voltage.

We serviced a

KITCHENAID REFRIGERATOR

Model KRFF507HPS00

Near Albuquerque, NM 87120

Larry

Job Details: 04/28/2023

Installed parts listed and tested good - Unit is good to go

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF736SDAM14

Near Albuquerque, NM 87120

Larry

Job Details: 04/28/2023

CX complaint - Unit making rattling noise - Inspected unit and found the damper motor loud - Replaced with TS and tested good- Unit is good to go; used 1 WPW10479155 (Damper) from stock

We serviced a

SAMSUNG REFRIGERATOR

Model RF27T5241SR/AA

Near Monument, CO 80132

Jonny

Job Details: 04/28/2023

"Custy plugged fridge in 15 mins before I got here, but didn't tell me that until I checked I. And took pics and such so I waited a while and saw the Temps getting colder, ran hass and it passed, check3d all th3 fans and compressor worked, I charged him the 129.95 and told him he can call h3 has to pay it bcuz I op3n3d his unit and let him know next time dnt have the unit unplugged Autho#493nem"

We serviced a

MAYTAG WASHER

Model MVWX655DW1

Near Albuquerque, NM 87120

Larry

Job Details: 04/28/2023

Installed parts listed and tested good - Unit is good to go

We serviced a

KITCHENAID DISHWASHER

Model KDTM404KPS1

Near Albuquerque, NM 87120

Larry

Job Details: 04/28/2023

Installed console and tested good - Unit is good to go

We serviced a

WHIRLPOOL DISHWASHER

Model WDTA50SAKZ0

Near Colorado Springs, CO 80919

Carlos

Job Details: 04/28/2023

installed listed parts. All ok

We serviced a

MAYTAG DISHWASHER

Model MDB4949SHZ0

Near Pueblo, CO 81008

Ken

Job Details: 04/28/2023

Installed motor and tested

We serviced a

SAMSUNG WASHER

Model WA52A5500AV/US

Near Colorado Springs, CO 80923

Jonny

Job Details: 04/28/2023

"Exchanged pcbs, hass passed, gav3 custy washer education"

We serviced a

SAMSUNG REFRIGERATOR

Model RF197ABRS/XAA

Near Colorado Springs, CO 80916

Jonny

Job Details: 04/28/2023

"Ndf, she just wanted to have it checked, didn't like how ice cubes came out, it's dumped the ice and filled with water when I hit the reset button so it works to specs Autho#tc93n9"

We serviced a

KITCHENAID REFRIGERATOR

Model KRMF706ESS01

Near Grand Junction, CO 81505

James R

Job Details: 04/28/2023

When I arrived unit was cooling somewhat both compartments. Removed doors and drawer. checked evaporators in Frz and F.F for a leak could find none. Using a black light. Checked behind unit in compressor area. No leak. could see nothing on the condenser area as well. Put gauges on. called tech line. shut unit down let stabilize. Pressures did not stabilize properly. Could be a restriction in the system.Suggest I evac system in home position. Did so let set for awhile to see if there is a leak as well. Came up a bit. Evac some more. let set again. Seems to be holding. Vacumn did pull down on low and hi sides. Charged system Frz side lo 4 and hi 105 F.f. lo 4 Hi 110 Drier is warm so there is good circulation. Room temp 68 degrees. Please fill out survey.Room temp 64.5 degrees.

We serviced a

WHIRLPOOL WASHER

Model WFW85HEFC1

Near Peyton, CO 80831

Aaron

Job Details: 04/28/2023

"Replaced controls and tested unit, no error codes or door locking, unit is working well now. Advised customer of 5 star survey."

We serviced a

SAMSUNG WASHER

Model WA50M7450AW/A4

Near Colorado Springs, CO 80907

Brandon

Job Details: 04/28/2023

Installed lock washer and dampers ran horizontal diagnostics passed hass OQC passed calibrated unit all ok

We serviced a

SAMSUNG WASHER

Model WA50B5100AV/US

Near Colorado Springs, CO 80905

Jeremy

Job Details: 04/28/2023

Getting 9C8 Error. Replaced PCB. Ran HASS. Unit tested good. Double checked for leaks. Placed leak detection strip under unit. Asked CX to complete survey.

We serviced a

WHIRLPOOL WASHER

Model WTW4955HW3

Near Albuquerque, NM 87123

Jason

Job Details: 04/28/2023

"checked unit ran calibration cycle, unit opperation checks ok"

We serviced a

KITCHENAID DISHWASHER

Model KDTE104KPS1

Near Colorado Springs, CO 80908

Aaron

Job Details: 04/28/2023

"Left hinge came apart, stressed right hinge, replaced both hinges and tested unit, operating well now. Advised of 5 star survey"

We serviced a

AMANA WASHER

Model NTW4516FW4

Near Albuquerque, NM 87111

Jason

Job Details: 04/28/2023

Installed valve unit checks ok

We serviced a

WHIRLPOOL REFRIGERATOR

Model MSB27C2XAM00

Near Albuquerque, NM 87111

Jason

Job Details: 04/28/2023

Checked unit found no power to motor when paddle is pressed motor is locked up suspect motor took control relay outSC$140.02LABOR$160.55MISC$17.50MOTOR#WP2323603$250.78CONTROL#W11088499$290.21TX$44.36TOTAL$903.42CX DOES NOT WANT TO REPAIR AT THIS TIMEAuth code:H394HC$140.02

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRX986SIHZ00

Near Albuquerque, NM 87122

Jason

Job Details: 04/28/2023

checked unit found unit has a leak in ff evap would cost roughly $1500 to repair cx does not wanna repair unit Auth code:TUU93K$140.02

We serviced a

WHIRLPOOL DRYER

Model MEDC465HW0

Near Monument, CO 80132

Glenn

Job Details: 04/28/2023

"Not drying properly. Re-seated connections, All OPS Test:OK, Found slight restriction in vent. Suggest customer have vent system cleaned once per year. Also suggest using Timed Dry Cycle. Signal Alert is working."

We serviced a

KITCHENAID REFRIGERATOR

Model KRMF706ESS01

Near Monument, CO 80132

Glenn

Job Details: 04/28/2023

"Install New Door Gasket, Interior LED Modules.All OPS Test:OK"

We serviced a

MAYTAG DISHWASHER

Model MDB9959SKZ0

Near Colorado Springs, CO 80924

Glenn

Job Details: 04/28/2023

Install New UI Control & Console. All OPS Test:OK

We serviced a

WHIRLPOOL DISHWASHER

Model WDT730PAHZ0

Near Colorado Springs, CO 80924

Aaron

Job Details: 04/28/2023

"Removed and replaced door bracket, no rusted components in the door, fan and unit are working well. Advised customer of 5 star survey"

We serviced a

BOSCH DISHWASHER

Model SHPM65Z55N/01

Near Colorado Springs, CO 80908

Kris

Job Details: 04/28/2023

cleared debris from drain ran test op all ok unit is working to spec at this time.

We serviced a

KITCHENAID REFRIGERATOR

Model KRMF706ESS01

Near Colorado Springs, CO 80908

Kris

Job Details: 04/28/2023

installed fan ran test op all ok cx will monitor unit.

We serviced a

BOSCH REFRIGERATOR

Model B36FD50SNS/01

Near Florence, CO 81226

James

Job Details: 04/28/2023

"Installed ordered parts. Steamed icemaker drain line and cleaned all standing ice. Tested ops, all ckok.no leaks observed. Left litmus (see sd pics)"

We serviced a

AMANA REFRIGERATOR

Model ART318FFDB10

Near Colorado Springs, CO 80903

Carlos

Job Details: 04/28/2023

Small Ice build up in air vent for fresh food side. Clear out ice. All ok

We serviced a

AMANA WASHER

Model NFW5800HW4

Near Colorado Springs, CO 80924

Aaron

Job Details: 04/28/2023

"Installed lower wire harness and all suspension, all suspension has been changed, ran unit through drain and spin cycle, unit is working well, no odd noises from tub bearings, customer to monitor. Advised of 5 star survey"

We serviced a

WHIRLPOOL WASHER

Model WFW5620HW2

Near Colorado Springs, CO 80918

Glenn

Job Details: 04/28/2023

"Customer reports unit worked one time after i left last visit, then started having trouble again. Spin cycle never gets to high speed spin, also has trouble with control not starting cycles. Upon arrival, no error codes found. Techline: Diag Test 012 > Passed. No Errors. UI Control diag Test 1 > All Keys on UI working / responding. Ran another test using 4 large towels. Unit completed spin cycle. Pulled stacked unit out, inspected inside, found mouse droppings inside. no chewed wires, not finding anything other than worn slightly suspension. Told customer could also have pos bad bearing/spider gear. declined further estimate. wants to but new unit. SR#7736283453"

We serviced a

WHIRLPOOL DISHWASHER

Model WDT970SAKZ0

Near Albuquerque, NM 87120

Joseph

Job Details: 04/28/2023

Dishwasher was not leveled. Leveled unit. Unit is good to go.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS315SDHZ08

Near Albuquerque, NM 87114

Joseph

Job Details: 04/28/2023

Installed part listed. Ice maker tested good. Unit is good to go.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRX735SDHZ08

Near Rio Rancho, NM 87124

Joseph

Job Details: 04/28/2023

Installed parts listed. Unit tested good. Unit is good to go.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF535SWHZ07

Near Rio Rancho, NM 87144

Joseph

Job Details: 04/28/2023

Installed parts listed. Unit tested good. Unit is good to go.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRQA59CNKZ

Near Colorado Springs, CO 80916

Carlos

Job Details: 04/28/2023

Ran test op. All sensors test ok. temperature in refrigerator is 37 degrees. Temperature in freezer is 0 degrees. No sign of frost. Instructed customer on defrost cycle temperature shifts and product placement

We serviced a

SAMSUNG REFRIGERATOR

Model RF23HCEDBSR/AA

Near Colorado Springs, CO 80907

Brandon

Job Details: 04/28/2023

"Replaced ice maker kit and pcb, reset ice maker it cycled and sealed ice room silicone tested op all ok hass not compatible"

We serviced a

GE OVEN

Model JGB928SEK4SS

Near Colorado Springs, CO 80921

Jerimiah

Job Details: 04/28/2023

"Self clean does not initiate, door latch assembly needs replacing, part is discontinued. Per emails being exchanged between realtors, owners, and office will be invoicing customer(s). Due amount $89.95.WB02K10011 door latch assy discontinued"

We serviced a

GE MICROWAVE

Model JVM617SSK2SS

Near Colorado Springs, CO 80917

Jerimiah

Job Details: 04/28/2023

"Unit dead no power, verified microswitches, found burned out 20a fuse on noise filter board, replaced. Unit check ok. Charged SC labor part. $331.69 CC Auth# U44RMHFuse $20.00; used 1 Fuse (20a fuse) from stock"

We serviced a

MAYTAG REFRIGERATOR

Model MSS25N4MKZ04

Near Colorado Springs, CO 80909

Carlos

Job Details: 04/28/2023

Customer requires a different Ice maker than they ordered. They will order correct ice maker and call to have us installed

We serviced a

KITCHENAID REFRIGERATOR

Model KRMF706EBS01

Near Albuquerque, NM 87120

Joseph

Job Details: 04/28/2023

Installed parts listed. Customer upset that unit is not cold enough. Checked temperature in freezer and refrigerator. Temperature is good. Found food sitting all the way in the back blocking airflow which can cause cooling issues. Customer also upset about the gap between the right drawer and the right refrigerator door. The gap only gets big when leveling out the left refrigerators door. Let customer know its the way the unit is made. Customer is very upset with the design of the unit and wants the whole unit replaced. Kitchen aid does need to be contacted if customer wants the unit replaced due to the design of the unit.

We serviced a

WHIRLPOOL DRYER

Model WED4950HW0

Near Colorado Springs, CO 80923

Amos

Job Details: 04/28/2023

Ran test opp. Tested the thermal thermal cut off sensor and element all components are working good. Tested temp in unit went up to 153 dropped down to 118 all 3 times. Air duct needs to be cleared out not enough air flow.

We serviced a

JENNAIR WALLOVEN

Model JJW3830DP02

Near Peyton, CO 80831

Jerimiah

Job Details: 04/28/2023

"Installed replacement console, NO NOTES IN ACCOUNT. Called up office to figure out charges. Collected service charge and labor, $319.90 CC Auth# 3WEET4 collected. Disclosed survey to cust 5star fcc."

We serviced a

BOSCH MICROWAVE

Model HMD8451UC/05

Near Colorado Springs, CO 80924

Glenn

Job Details: 04/28/2023

"Customer indicated that unit worked properly for about a day and a half, then problem returned. Techline: Suggest adjust door switch assys as close to front of unit & tighten down. Tested 12X, appears to be working. Customer will monitor and let us know."

We serviced a

SAMSUNG WALLOVEN

Model NV51K7770DS/AA

Near Colorado Springs, CO 80921

Brandon

Job Details: 04/28/2023

"Replaced door lock mechanism, tested op all ok unit working properly, tested both upper and lower both got to temp a d stayed"

We serviced a

SAMSUNG REFRIGERATOR

Model RF25HMEDBSG/AA

Near Colorado Springs, CO 80918

Brandon

Job Details: 04/28/2023

"Replaced ice maker and pcb,reset ice maker it cycled hass passed OQC tested op all ok"