We serviced a
KITCHENAID REFRIGERATOR
Model KFIS29BBMS00
Near Los Lunas, New Mexico 87031
Larry
Job Details:
02/27/2024
Installed parts listed and tested good - Unit is good to go
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ08
Near Rio Rancho, New Mexico 87144
Larry
Job Details:
02/27/2024
CX Complaint - Fridge making noise - Inspected unit and found ice build-up caused by water dripping behind the evap cover/air duct from the IM fill tube - Called techline (SR7738562489) Found crack in liner behind air duct - Unit is un-repairable
We serviced a
MAYTAG DISHWASHER
Model MDB8959SFH4
Near Albuquerque, New Mexico 87120
Larry
Job Details:
02/27/2024
Installed gasket and tested good - Unit is good to go
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Albuquerque, New Mexico 87121
Larry
Job Details:
02/27/2024
Installed gear case and tested good - Unit is good to go
We serviced a
WHIRLPOOL WASHER
Model WTW5105HC3
Near Albuquerque, New Mexico 87121
Larry
Job Details:
02/27/2024
Arrived to house and found it gated and derelict with all the windows broken out. I am not comfortable going to this house and will not be returning
We serviced a
GLADIATOR REFRIGERATOR
Model GARF30FDGB04
Near Aspen, Colorado 81611
James R
Job Details:
02/27/2024
Customer signed disclaimer. Replaced pedal had gotten bent. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
KITCHENAID REFRIGERATOR
Model KRSC703HPS01
Near Santa Fe, New Mexico 87508
Jason
Job Details:
02/27/2024
checked unit found there was an item blocking airflow to sensor causing unit to not properly sense temp in ff section removed item also spoke with cx on loading in the future
We serviced a
KITCHENAID COOKTOP
Model KICU569XBL00
Near Santa Fe, New Mexico 87508
Jason
Job Details:
02/27/2024
Installed part found fuse on other IPC blew. part is discontinued spoke with techline to verify SR7738562173 RESOLUTION TEAM WILL CONTACT CX IN 2-3 BUSINESS DAYS FOR A RESOLUTION
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT318FMDB09
Near Albuquerque, New Mexico 87105
Larry
Job Details:
02/27/2024
Installed door and tested good - Unit is good to go
We serviced a
BOSCH DISHWASHER
Model SHPM78Z55N/20
Near Aspen, Colorado 81611
Erik
Job Details:
02/27/2024
install/ test: GOODJOB COMPLETE
We serviced a
BOSCH REFRIGERATOR
Model B36CL80ENS/09
Near Carbondale, Colorado 81623
Erik
Job Details:
02/27/2024
floor/walls uneven *see quick picsinstall/ builder to address level flooring (back legs do NOT level on unit) and wall out of level on the right hand sideattempt ot level unit with no success - impossible to level rear legs - no parts can reconcile floor levelCX does not want to sign for JOB 517307JOB COMPLETE
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017HS10
Near Santa Fe, New Mexico 87507
Jason
Job Details:
02/27/2024
installed motor unit checks ok
We serviced a
GE WASHER-DRYER COM
Model GUD24ESSM1WW
Near Silt, Colorado 81652
Erik
Job Details:
02/27/2024
EH to return extra motorinstall motor and switch/ test: GOODHEAT: GOODJOB COMPLETE
We serviced a
GE DRYER
Model PTD70EBPTDG
Near New Castle, Colorado 81647
Erik
Job Details:
02/27/2024
idler pulley binding and squealing - pull drum and reset idler pulleytest with CX: sounds normal - CX will test fully loaded and C/B may be requiredC/B will need: WE03X33642 &WE03X33643CX will call back if needed
We serviced a
SAMSUNG DRYER
Model DVE50BG8300VA3
Near Colorado Springs, Colorado 80904
Mathew
Job Details:
02/27/2024
"Found dent in side of machine, barrel rubbing against case. Found bad roller. Replaced all rollers and straightened out case, Cx happy with operation of dryer."
We serviced a
WHIRLPOOL RANGE
Model WFE515S0JS1
Near Aspen, Colorado 81611
James R
Job Details:
02/27/2024
Customer signed disclaimer. Replaced cooktop operating as should. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Carbondale, Colorado 81623
James R
Job Details:
02/27/2024
Signed disclaimer. Customer had issues several times with unit not starting. No apparent error codes. Replaced control. Calibrated unit and did a service diagnostics test operating as should. Please fill out whirlpool tech satisfaction survey. Thank You. Unit leased 12/4/2023
We serviced a
SAMSUNG REFRIGERATOR
Model RF23CB9900QKAA
Near Colorado Springs, Colorado 80921
Brandon
Job Details:
02/27/2024
"Blank screen, checked connections all ok, replaced parts and tested op all checks ok hass oqc passed"
We serviced a
WHIRLPOOL DISHWASHER
Model WDF520PADM9
Near Rio Rancho, New Mexico 87144
Joe
Job Details:
02/27/2024
cx complaint - dishes are still dirty after - replaced parts ordered last visit - tested unit - unit good to go
We serviced a
DACOR OVEN
Model HWO130FS
Near Monument, Colorado 80132
Brandon
Job Details:
02/27/2024
"Replaced hinges and dampers, door is flush now all checks ok"
We serviced a
SAMSUNG DRYER
Model DVE45R6300/A3
Near Colorado Springs, Colorado 80908
Brandon
Job Details:
02/27/2024
Replaced heater and tested op all checks hass oqc passed
We serviced a
KITCHENAID MICROWAVE OVEN
Model KOCE500EBS22
Near Santa Fe, New Mexico 87505
Jason
Job Details:
02/27/2024
installed support unit checks ok
We serviced a
AMANA DRYER
Model NED4655EW1
Near Colorado Springs, Colorado 80927
Aaron
Job Details:
02/27/2024
"Thermostat shorted out, replaced heating element and thermostat, tested unit, good temperature wavelengths, vent hose crushed and lint in hose, cleared lint and placed unit in proper location to allow best airflow. Recommend rigid vent hose. Advised customer of 5 star survey."
We serviced a
MAYTAG DRYER
Model MGD6200KW0
Near Carbondale, Colorado 81623
James R
Job Details:
02/27/2024
"Customer signed disclaimer. Unit will ignite and heat for a bit and then quit. Removed control panel. Checked igniter relay checked good. Removed rear panel. Checked wire harness and thermals all ok. Reassembled then removed top,front of unit checked connections at coils ok. checked motor ok. checked igniter connector found it not snapped in properly. Connected right. Reassembled unit test run is operating as should. Please fill out whirlpool tech satisfaction survey. Thank You. Customer paid Service call $99.00 auth code. A9TXY9"
We serviced a
SAMSUNG RANGE
Model NE63A6511SG/AA
Near Fountain, Colorado 80817
Mathew
Job Details:
02/27/2024
Replaced bulb assembly. Test op all okay.
We serviced a
SAMSUNG MICROWAVE
Model ME19R7041FS
Near Fountain, Colorado 80817
Mathew
Job Details:
02/27/2024
"Replaced all high voltage side components and wire harness. Test op all okay but strong smell from charred inner cabinets persist. Called techline to document, agent sent this ticket for review, will contact Cx when decision is made."
We serviced a
SAMSUNG DISHWASHER
Model DW80R2031UG/AA
Near Fountain, Colorado 80817
Mathew
Job Details:
02/27/2024
"Found bad touch control. Replaced main pcb and touch control, tightend wire nut at terminal block. Test op all okay."
We serviced a
SUBZERO FREEZER
Model IC-30FI-RH
Near Colorado Springs, Colorado 80904
Ralph
Job Details:
02/27/2024
"unit has a broken wire on the control. will need to be replaced, cust is going to call subzero to get assistance on this part, part 7041813 $266.65, tax 21.87, labor 189.95, other 14.50, total remaining 492.47, cust paying service charge today. cust paid service fee autho no. 4RU4UN"
We serviced a
ZEPHYR RANGE HOOD
Model ALU-E63CWX
Near Colorado Springs, Colorado 80922
Jessie
Job Details:
02/27/2024
Replaced control. Unit works much better all ok
We serviced a
WHIRLPOOL DISHWASHER
Model WDTA50SAKZ1
Near Colorado Springs, Colorado 80906
Carlos
Job Details:
02/27/2024
"Found water in bottom tray, cleaned out, made sure water supply line was tighten, cx education on loading dishes, installed new seal"
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Monument, Colorado 80132
Glenn
Job Details:
02/27/2024
"Found worn teeth on Motor cam (Splutch Assy) Installed New Splutch Assy. P/N: W10721967 , Had Logan in Office add part to ticket, I will pick up in office for tomorrows job I borrwed it from. If problem returns, order new Shifter - W11481722 , And re-order cam kit. , ALL OPS TEST:OK"
We serviced a
WHIRLPOOL DRYER
Model WED6620HW1
Near Colorado Springs, Colorado 80921
Glenn
Job Details:
02/27/2024
Bad Element & T-stats. Install New Element & T-stat kit. All OPS Test:OK
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ
Near Colorado Springs, Colorado 80906
Carlos
Job Details:
02/27/2024
"Ran test, found debris in drain pump, removed, runs all ok"
We serviced a
MAYTAG WASHER
Model MHW5630HC2
Near Pueblo, Colorado 81001
James
Job Details:
02/27/2024
found loose wire at Main board causing ui to not respond. secured wire and tested all ops test good. left litmus
We serviced a
MAYTAG DRYER
Model MED7230HW3
Near Colorado Springs, Colorado 80906
Carlos
Job Details:
02/27/2024
"Installed control board and U, ran test, runs ok. Cx will observe"
We serviced a
MIELE FRONT-LOAD WASHE
Model WWH860
Near Manitou Springs, Colorado 80829
Roman
Job Details:
02/27/2024
Removed hoses off the washer and dryer and removed the stacked kit. Zip tied everything down that needs to be and installed the shipping struts. Made sure tub is secure. SC $149.95Labor $99.95Total cost $249.90
We serviced a
JENNAIR REFRIGERATOR
Model JF42NXFXDE02
Near Colorado Springs, Colorado 80921
Glenn
Job Details:
02/27/2024
"Verified W/ Scott in office, all covered under warranty, Install New LED Module Kit, All OPS Test:OK. All Lights Now Working."
We serviced a
MAYTAG WASHER
Model MHW5630HW3
Near Divide, Colorado 80814
David
Job Details:
02/27/2024
"Replaced tub, shocks, springs, and stator Ran diagnostics test, and a quick cycle Appears to be better, washer is on a pedestal Cx will run for a week or 2 to see how it does"
We serviced a
WOLF RANGE GAS
Model DF304
Near Colorado Springs, Colorado 80918
Jessie
Job Details:
02/27/2024
Customer states unit is 50 - 100 degrees off. Using spring style thermo. Oven door not sealing. Very noisey convection fan. Unit reached temp with np issues. Took average on unit. Taking a long time to rebound temps.Temps. unit inner and out bake element no op. Bad relay bdCw fan#809820 $284.34Ccw fan 809818 $245.62Logo#815575 $44.15Hydraulic hinge#812273 $177.70Spring hinge# 812271 $187.56Gasket#816658 $43.03Relay bd#807052 $231.65Total parts $1214.05Tax $99.55Sc $149.95Msrp $14.50Labor 399.95Total $1878.00Customer will think about repair. 2 hours on jon
We serviced a
GE DRYER
Model GTD58GBSV0WS
Near Colorado Springs, Colorado 80906
Roman
Job Details:
02/27/2024
Installed new belt and yes yes s the dryer. Dryer working great and heating up.
We serviced a
CAFE RANGE - GAS
Model C2Y366P2TS1
Near Colorado Springs, Colorado 80904
Ralph
Job Details:
02/27/2024
"made an adjustment to the postion of the valve so it wouldnt drag on the bezel, cust happy with adjustment"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ04
Near Colorado Springs, Colorado 80920
Glenn
Job Details:
02/27/2024
"Diffuser / Damper part defective again.Techline: Indicates they have seen several reports issues of this type, and Engineering is currently looking into it, however, no resolution as of yet. SR# 7738565575Called Tradecare for Additional Labor Autho# W1AHC30DL1 , Since part is defective, not actually a callback due to tech service provided was accurate."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ18
Near Florissant, Colorado 80816
David
Job Details:
02/27/2024
Replaced evap motor and control board. Ran diagnostics and operation Running good
We serviced a
MIDEA DISHWASHER
Model MDT24H2AST
Near Colorado Springs, Colorado 80923
Jessie
Job Details:
02/27/2024
Replaced bad latch. Test op. Leak strip added. All.ok
We serviced a
WHIRLPOOL RESIDENTIAL REFR
Model WRS588FIHZ04
Near Colorado Springs, Colorado 80918
Glenn
Job Details:
02/27/2024
"Install New Icemaker & Shelf. Cycle Test IM > Pass, Fill Test> Pass"
We serviced a
GE COOKTOP - ELECTR
Model PP9030SJ1SS
Near Colorado Springs, Colorado 80924
Kris
Job Details:
02/27/2024
installed element ran test op all ok at this time.
We serviced a
KITCHENAID WALLOVEN
Model KSGG700ESS2
Near Colorado Springs, Colorado 80924
Aaron
Job Details:
02/27/2024
"LF and LR burner orifices clogged, cleared orifices and electrodes of debris, tested and lighting well now, educated customer of burner difference between single and double orifice burners. Advised customer of 5 star survey."
We serviced a
MAYTAG DRYER ELECTRIC
Model MED8200FC1
Near Colorado Springs, Colorado 80908
Aaron
Job Details:
02/27/2024
"Rollers and idler have worn from use, unit is heating well. Needs repair kit. Approved onsite. Removed and replaced components. Tested unit, working and heating well. Repair kit 4392067 $76.48Tax $6.27Supplies $14.50Hc $129.95Labor $199.95Total job $427.15No return on parts Auth total job $427.15 #34VJLY"
We serviced a
WHIRLPOOL DRYER
Model WED495HW0
Near Peyton, Colorado 80831
Aaron
Job Details:
02/27/2024
"Heating element is shorted out, thermostats check out okay, Needs element. Approved onsite. Removed and replaced element. Tested and heating well now. Element 279838 $99.28Tax $8.14Supplies $14.50Hc $129.95Labor $179.95Total job $431.82No return on parts Auth total due $431.82 #94FW3U"
We serviced a
KITCHENAID DISHWASHER
Model KDTE204KPS2
Near Colorado Springs, Colorado 80909
Carlos
Job Details:
02/27/2024
"Installed sump assembly and control board, runs all ok, left leak strip."
We serviced a
SAMSUNG WASHER
Model WA50R5200AW/US
Near Colorado Springs, Colorado 80925
Mathew
Job Details:
02/27/2024
"Replaced clutch assy. Test op, all okay."
We serviced a
ASKO DISHWASHER
Model D5654
Near Colorado Springs, Colorado 80906
Ralph
Job Details:
02/27/2024
"wash pump is leaking, saw a couple drops of water coming off of it. part 700244 $539.00, tax $44.20, labor 259.95, other 14.50, sc 149.95, total cost 1007.60, cust paying service fee which will leave a remainder balance of 857.65...autho no. for SC, NRR43E"
We serviced a
FRIGIDAIRE DISHWASHER
Model FGIP2468UF0A
Near Colorado Springs, Colorado 80925
Ralph
Job Details:
02/27/2024
"tub is warped and causing unit to leak, tub is discontinued, autho no. 99CPKL"
We serviced a
VIKING RANGE
Model VDR5304BCB01
Near Colorado Springs, Colorado 80921
Jerimiah
Job Details:
02/27/2024
"Bullnose knob lighting not working. Techline says 12v toggle power supply red black 12VDC or blk wht 120VAC. When the bullnose was removed the lights activated. Unknown where problem lies but could not get unit to fail again, more than likely somewhere in wiring, good known part numbers listed. Charging service call. $172.44 CC Auth# E43EH3Power supply 069993-000Toggle 046283-000"
We serviced a
FRIGIDAIRE MICROWAVE
Model n/a
Near Colorado Springs, Colorado 80925
Ralph
Job Details:
02/27/2024
"too costly to repair, cust to replace,,,,cust paid total autho no. 9ME3LT"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHW08
Near Colorado Springs, Colorado 80911
Ralph
Job Details:
02/27/2024
replaced heater harness and cust to monitor the unit
We serviced a
MAYTAG WASHER
Model MVWB765FW3
Near Colorado Springs, Colorado 80906
Roman
Job Details:
02/27/2024
"Ran the washer and it will agitate, drain and spin. Washer will not fill with water, checked the voltage and its good, also checked the screens on the inlet valve. Bad inlet valve. Recommend replacing it. Return later in the day and installed new valve. Checked for leaks and made sure hot and cold are working. Washer working great. Inlet valve #W11165546 $ $77.05Tax $6.32Parts total $83.37MPs $14.50Labor 159.95Sc $129.95Total cost $387.77"
We serviced a
SUB ZERO REFRIGERATOR
Model BI-42UFD/S/PH
Near Monument, Colorado 80132
Jessie
Job Details:
02/27/2024
Unit still in garage. Replaced top and grill. All ok
We serviced a
GE REFRIGERATOR/TOP
Model GNE25JYKHFFS
Near Pueblo, Colorado 81005
Domingo
Job Details:
02/27/2024
Install ice maker and water valve test it okay
We serviced a
ZLINE REFRIGERATOR
Model RFMW36
Near Monument, Colorado 80132
Jessie
Job Details:
02/27/2024
Replaced filter head. All ok
We serviced a
JENN-AIR RANGE
Model JDRP548HL01
Near Colorado Springs, Colorado 80908
Jessie
Job Details:
02/27/2024
"Upon arrival checked unit over with gas sniffer before playing with any operations. Checked valves, burners inside cavity, rear, orfice area, around parameter of unit. Customer has carbon monoxide detectors in the home that have never gone off. Ran all operations on unit with gas sniffer on, sniffer did not detect anything. Turned off the unit and rechecked all listed parts. Customer should run vent during cooktop use."
We serviced a
GE STACK UNIT
Model GUD27ESSM1WW
Near Colorado Springs, Colorado 80916
Roman
Job Details:
02/27/2024
Installed new doors latch and lock. Made sure washer locked and worked properly. Washer working great.
We serviced a
MIELE WASHER
Model WXR860
Near Colorado Springs, Colorado 80909
Roman
Job Details:
02/27/2024
"Ran washer in diagnostics and found it was not heating, pulled the u it apart and found a short wire on the heater. Need to splice in a new connector. Came back later in the day and spliced in new connector and added extra protection around other wires, tested the washer on a cycle and water got hot so it is heating up. Calibrated the washer. Left washer on a high temp wash. Labor 219.95MPs $14.50Total $234.45Paid labor MPs $234.45 CK Auth# NW4NW9Reference number #1008850940"
We serviced a
BOSCH WALLOVEN
Model HMC80252UC/05
Near Colorado Springs, Colorado 80924
Jerimiah
Job Details:
02/27/2024
"Found TCO, wire and noise filter fuse burned out, repaired/replaced. Unit check ok charged sc part labor chk#6083 $386.46 CK Auth# 4LLPT3TCO $4020a fuse $40Labor $149.95; used 1 20a fuse (20a fuse), and 1 TCO (Mag TCO) from stock"
We serviced a
SAMSUNG WASHER
Model WF45R6300AV/US
Near Colorado Springs, Colorado 80925
Mathew
Job Details:
02/27/2024
"Found 5c code stored, drain pump getting power but not moving water. Vacuumed out water, checked pump filter. Nothing clogging drain pump filter. Took apart drain pump, found a clog in housing. Reassemble, test op all okay. Paid svf 129.95 $129.95 CC Auth# 3N9APJ"
We serviced a
MAYTAG WASHER
Model MVW5035MW0
Near Albuquerque, New Mexico 87105
Jason
Job Details:
02/27/2024
installed part unit checks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF535SWHZ02
Near Colorado Springs, Colorado 80920
Aaron
Job Details:
02/27/2024
"Unit pulled out upon arrival. Unit is unable to defrost, heater shorted out, control is not sending power. Tested other components through diagnostics. Thermistor kit w10316760 $93.02Control wpw10503278 $266.48Heater wp12729123 $143.84Total parts $503.34Tax $41.27Supplies $14.50Hc $149.95Labor $229.95Total job $939.0130 day estimate No return on parts Auth 149.95 hc #KH94LX"
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Rifle, Colorado 81650
James R
Job Details:
02/27/2024
Printerd labels took pics ready to send.
We serviced a
SAMSUNG REFRIGERATOR
Model RF28K9380SR
Near Colorado Springs, Colorado 80917
Brandon
Job Details:
02/27/2024
"No errors, ice route seal is bad, need ice route assy, cleared ice from ice room, sealed ice room, ice maker is making ice, cycled ice maker ok, all other checks ok, cx has to advise warranty company about repair before moving forward,Svf paid $129.95 Auth# CJ4YPW, Ice route Da97-13829c $235.90, Labor $199.95, Svf $129.95, Mps $14.50, Tax $19.34"
We serviced a
SAMSUNG RANGE
Model NE63A6511SG/AA
Near Fountain, Colorado 80817
Mathew
Job Details:
02/27/2024
Replaced bulb assembly. Test op all okay.
We serviced a
BOSCH MICROWAVE
Model HMC80151UC/01
Near Colorado Springs, Colorado 80903
Ralph
Job Details:
02/26/2024
"unit had a broken or burnt wire, replaced and unit checked okay"
We serviced a
MAYTAG WASHER
Model MVW4505MW0
Near Pueblo, Colorado 81004
James
Job Details:
02/26/2024
found loose wire to drain pump causing no drain. secured and addrssed. tested ops all ckok left litmus
We serviced a
FISHERPAYKEL REFRIGERATOR
Model RF170BRPUX6
Near Colorado Springs, Colorado 80909
Ralph
Job Details:
02/26/2024
"upon arriaval found water off turned it on and water started dispensing,may have been frozen water line, but currently unit is working correctly...cust paid total bill autho no, C93AJ3"
We serviced a
GE DRYER
Model GTD58GBSVWS
Near Gypsum, Colorado 81637
Erik
Job Details:
02/26/2024
CX cancelled service call
We serviced a
GE WASHER
Model GTW540ASPWS
Near Pueblo, Colorado 81001
Domingo
Job Details:
02/26/2024
Broken outer tub a part is not repairable customer needs to call consumer relations Called GE case number 12358213 consumer relations number 18003861215
We serviced a
SAMSUNG REFRIGERATOR
Model RF26J7500SR/AA
Near Colorado Springs, Colorado 80922
Brandon
Job Details:
02/26/2024
"Error 40c, auger clip broke, replaced all parts and tested op all checks ok installed leak strip"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF535SWHZ10
Near Grand Junction, Colorado 81505
James R
Job Details:
02/26/2024
Customer signed disclaimers. Replaced dampner control and evap fan motor unit sounds normal operating as should. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKB2
Near Colorado Springs, Colorado 80922
Aaron
Job Details:
02/26/2024
"Dispenser motor is not properly opening for soap to dissolve, removed and replaced dispenser assembly, tested unit through diagnostics, working well now, door opening. Installed litmus strip and advised customer of 5 star survey."
We serviced a
WHIRLPOOL DRYER
Model WGD9470WL1
Near Edwards, Colorado 81632
Antonio
Job Details:
02/26/2024
Installed new dryer kit unitvtested good Sc $149.95Lb $189.95Pt $76.48$416.38 CC Auth# J3NJ44; used 1 4392067 (Dryer kit) from stock
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT518SZFM02
Near Edwards, Colorado 81632
Antonio
Job Details:
02/26/2024
Checed unit unit us working properly fridge 35? and frizer -10?
We serviced a
MAYTAG WASHER
Model MVWX655DW1
Near Belen, New Mexico 87002
Larry
Job Details:
02/26/2024
Called AIG for parts approval for additional parts - Repair was denied - SR7738248751
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ2
Near Los Lunas, New Mexico 87031
Larry
Job Details:
02/26/2024
Installed control and tested good - Unit is good to go
We serviced a
BOSCH DISHWASHER
Model SHXM88Z75N/20
Near Eagle, Colorado 81631
Erik
Job Details:
02/26/2024
e24 Failure check drain *see quick pics drain kinkcontractor responsible for install to address part replcementDRAIN LINE 00744881autho# 999XYN
We serviced a
BOSCH DISHWASHER
Model SHPM78Z55N/22
Near Edwards, Colorado 81632
Erik
Job Details:
02/26/2024
install parts on site/ test: GOODJOB COMPLETE
We serviced a
THERMADOR RANGE
Model PRD486WDGU/05
Near Avon, Colorado 81620
Erik
Job Details:
02/26/2024
install innr doors on pro 48JOB COMOPLETECX not avaialable for signature
We serviced a
SAMSUNG WASHER
Model WF45R6100AC/US
Near Colorado Springs, Colorado 80915
Mathew
Job Details:
02/26/2024
Replaced pump and pcb. Test op all okay.
We serviced a
SAMSUNG DRYER
Model DVE45T6000W/A3
Near Colorado Springs, Colorado 80909
Mathew
Job Details:
02/26/2024
"Found belt shredded inside of machine. Replaced motor, belt and all rollers. Test op all okay."
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5201SR/AA
Near Colorado Springs, Colorado 80910
Mathew
Job Details:
02/26/2024
Replaced all icemaker parts and defrosted/ sealed room. Test op all okay.
We serviced a
SAMSUNG REFRIGERATOR
Model RF28R7351SR/AA
Near Peyton, Colorado 80831
Brandon
Job Details:
02/26/2024
"Error 39c, replaced parts and tested op all checks ok hass oqc passed"
We serviced a
KITCHENAID DISHWASHER
Model KDFE104KPS2
Near Albuquerque, New Mexico 87107
Larry
Job Details:
02/26/2024
CX canceled call
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ04
Near Albuquerque, New Mexico 87114
Joe
Job Details:
02/26/2024
cx complaint - freezer ice maker over filling - inspected unit - needs water valve and ice makerice maker / W1578780/ $224.02water valve / W11482025 / $185.64misc / $17.50
We serviced a
WHIRLPOOL RANGE
Model WFG505M0MS0
Near Albuquerque, New Mexico 87120
Larry
Job Details:
02/26/2024
Installed control and tested good - Unit is good to go
We serviced a
WHIRLPOOL REFRIGERATOR BOT
Model WRF736SDAM12
Near Albuquerque, New Mexico 87120
Larry
Job Details:
02/26/2024
CX complaint - Not making ice and frost built up in freezer - Inspected unit and found the unit is not going into defrost - Unit needs freezer harness and control - CX doesn't want to bear the cost of repair and will replaced unit.Control - $360.05Harness - $314.22MSP - $17.50Labor - $209.95Tax - $74.39
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHM08
Near Albuquerque, New Mexico 87121
Larry
Job Details:
02/26/2024
CX complaint - humming noise - side by side refrigerator - rc - all the time - not dispensing water - Inspected unit and found the ice door failed causing frost to build up caust the fan to fail - Installed pre-id parts and tested good - Unit is good to go
We serviced a
KITCHENAID DISHWASHER
Model KDFE204KBL0
Near Grand Junction, Colorado 81507
James R
Job Details:
02/26/2024
Replaced dispenser test operation. Is working as should. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
SAMSUNG DRYER
Model DVE45T3200W/A3
Near Colorado Springs, Colorado 80917
Brandon
Job Details:
02/26/2024
"Found loose connection from sub to main PCB, reseated connections and tested op all checks hass oqc passed"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF535SWHZ11
Near Grand Junction, Colorado 81505
James R
Job Details:
02/26/2024
Customer signed disclaimer. Replaced inlet water valve. Test operation of unit. Dispensing and icemaker both working good. Operating as should. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
SAMSUNG DISHWASHER
Model DW80R5060UG/AA
Near Colorado Springs, Colorado 80909
Mathew
Job Details:
02/26/2024
"Checked all connection points, no signs of leak but leak error still present. Replaced pcb and leak sensor, ran through diag cycle, all good."
We serviced a
WHIRLPOOL DISHWASHER
Model KDTM404ESS1
Near Albuquerque, New Mexico 87111
Jason
Job Details:
02/26/2024
Checked unit found control smoked and damaged wiring harness and control would be neededSC$151.85MISC$17.50LABOR$162.70CONTROL#W10854228$248.28HARNESS#W10868082$157.92TX$34.53TOTAL$772.78CK AUTHO#JH344W$151.85
We serviced a
BOSCH FRENCH DOOR REFR
Model B36CL80SNS/10
Near Colorado Springs, Colorado 80908
Jessie
Job Details:
02/26/2024
Replaved door. Looks good all ok

