Service History 331 - D3 Appliance

We serviced a

MAYTAG WASHER

Model MVWB765FC3

Near Albuquerque, NM 87120

Larry

Job Details: 01/13/2023

Installed Lid and tested good - Unit is good to go

We serviced a

WHIRLPOOL WASHER

Model WFW9150WW01

Near Belen, NM 87002

Larry

Job Details: 01/13/2023

CX complaint - Not turning on - Unit needs controls - CX doesn't want to bear the cost of repair - Collected $129.95 Auth-R9UJUT

We serviced a

JENN-AIR MICROWAVE

Model JMW2430DP01

Near Colorado Springs, CO 80921

Kris

Job Details: 01/13/2023

ran test op could not get microwave to function. unit was not programmed correctly. reprogrammed correct model number ran test op all ok. cx is aware of 5 star survey.

We serviced a

MIDEA FREEZER

Model MRU17F6AWW

Near Colorado Springs, CO 80906

Ralph

Job Details: 01/13/2023

replaced listed part and cust to monitor the unit

We serviced a

FRIGIDAIRE REFRIGERATOR

Model FPRU19F8RFF

Near Colorado Springs, CO 80906

Ralph

Job Details: 01/13/2023

this sensor is badf as well ordering another and will install once we get it. cust payiong ...cust paid in full autho no. c3k4y4

We serviced a

JENN-AIR MICROWAVE

Model JMC2430DS01

Near Colorado Springs, CO 80921

Kris

Job Details: 01/13/2023

installed console. ran test op with cx unit is working to spec.

We serviced a

KITCHENAID REFRIGERATOR

Model KRSC503ESS01

Near Colorado Springs, CO 80918

Kris

Job Details: 01/13/2023

just want it noted cx stated when she turned off unit to defrost. freezer section was defrosting ice bin was not frozen and sausage was no longer frozen. installed ui set for 8 hiour defrost. all ok cx will monitor unit for 24 hours.

We serviced a

WHIRLPOOL RANGE

Model WFE320M0JS3

Near Colorado Springs, CO 80916

Ken

Job Details: 01/13/2023

Installed panel

We serviced a

GENERAL ELECTRIC REFRIGERATOR/TOP

Model CYE22TP2MGS1

Near Pueblo, CO 81008

James

Job Details: 01/13/2023

Installed previous techs ordered parts all ops test good

We serviced a

GENERAL ELECTRIC MICROWAVE OVEN

Model JVM3160DF8BB

Near Colorado Springs, CO 80915

Jim

Job Details: 01/13/2023

replaced the 160 thermostat and the 110 thermostat unit test ok

We serviced a

MAYTAG DRYER

Model MED6230HW1

Near Rio Rancho, NM 87144

Joseph

Job Details: 01/13/2023

installed parts listed.un it tested good. unit is good to go.

We serviced a

KITCHENAID VENT HOODS

Model KVUB400GSS0

Near Colorado Springs, CO 80906

Ralph

Job Details: 01/13/2023

"installed part and unit checked okay, told cust avbout the survey"

We serviced a

SAMSUNG DISHWASHER

Model DW80R2031US/AA

Near Colorado Springs, CO 80908

Brandon

Job Details: 01/13/2023

"Ran service mode test all ok, everything working as it should no issues found, recommended cx open door after cycle to help with drying. Tech line had me check temp of water after running unit for 15 minutes all ok hass not compatible cx not available to discuss survey"

We serviced a

WHIRLPOOL DRYER

Model WED4850HW0

Near Colorado Springs, CO 80916

Ken

Job Details: 01/13/2023

Installed rear panel

We serviced a

KITCHENAID DISHWASHER

Model KDTE204KPS1

Near Colorado Springs, CO 80917

Kris

Job Details: 01/12/2023

ran test op. unit is getting power. pulled door ui was unplugged from contriol. reseated connections ran test op all ok unit is working to spec. did not talk with cx about 5 star survey. unit was at a business.

We serviced a

WHIRLPOOL WASHER

Model WTW5057LW0

Near Pueblo, CO 81003

Jeremy

Job Details: 01/12/2023

"Installed new gearcase and feet. Tested unit. Everything up to munufacturer specs.; (created new UIS, deleted prior attachment to UisID 194146)"

We serviced a

GENERAL ELECTRIC RANGE

Model JGS760EP3ES

Near Grand Lake, CO 80447

Erik

Job Details: 01/12/2023

installed orifice holder and convert to LP -test - good

We serviced a

MAYTAG DRYER

Model MEDC465HW0

Near Colorado Springs, CO 80911

Jim

Job Details: 01/12/2023

"found the timer not advancing, replaced the timer unit test ok"

We serviced a

WHIRLPOOL DISHWASHER

Model WDT750SAKZ0

Near Colorado Springs, CO 80924

Aaron

Job Details: 01/12/2023

"No power coming from the board to drain pump or water inlet valve. Needs board. Board acu w11462458 $262.78Tax $21.55Hc $129.95Labor $169.95Total job $584.2330 day estimateNot home to advise of 5 star surveyCc on file not charged 129.95 as of yet, cx not home for approval"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRX986SIHZ00

Near Peyton, CO 80831

Kris

Job Details: 01/12/2023

installed ice maker. ran test op all ok unit is working to spec. freezer temp@2.5 ref temp@41.9

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF757SDHZ00

Near Colorado Springs, CO 80920

Kris

Job Details: 01/12/2023

found bad led. installed all ok cx is aware of 5 star survey.

We serviced a

GENERAL ELECTRIC DISHWASHER

Model PDT715SBNTS

Near Green Mountain Falls, CO 80819

Ralph

Job Details: 01/12/2023

"found a loose screw on the upper part of the tub that had loosined, tightened itg and unit chekced okay"

We serviced a

VIKING DISHWASHER

Model UE9

Near Woodland Park, CO 80863

Ralph

Job Details: 01/12/2023

"looks like unit had reg dish soap in the unit, added oil and it desolved the soap, cust to monitor"

We serviced a

WHIRLPOOL WASHER

Model MVWB765FW3

Near Peralta, NM 87042

Larry

Job Details: 01/12/2023

Unit needs drain pump - CX doesn not want to bear the cost of repair - Collected $129.95 - Auth-4U9R9H

We serviced a

SAMSUNG RANGE - GAS

Model NX58F5700WS/AA

Near Colorado Springs, CO 80926

Brandon

Job Details: 01/12/2023

Replaced ignitor and tested op all okCollected labor $169.95 check Auth# 3H44A9

We serviced a

SAMSUNG WASHER

Model WF45T6000AW/A5 53

Near Yoder, CO 80864

Glenn

Job Details: 01/12/2023

"Install New Valve, Ran HASS Diagnostics. >PASSNo Internet, so unshure if report sent."

We serviced a

MAYTAG DRYER

Model MEDC215EW1

Near New Castle, CO 81647

James R

Job Details: 01/12/2023

replaced heat element and cutout. Heat element was bad. checked vent it was pinched not much air flow. corrected. and connected vent. airflow is better. cycling on and off for heat on all cycles. op's of unit is good. repair complete.Suggested to customer to have venting of home cleaned. Please fill out whirlpool customer satisfaction survey. Thank You.

We serviced a

WHIRLPOOL WASHER

Model WTW5057LW0

Near Albuquerque, NM 87113

Larry

Job Details: 01/12/2023

CX complaint - Makes loud grinding - Inspected unit and found the shifter was misaligned -mAdjusted shifter and tested good - Unit is good to go

We serviced a

KITCHENAID DISHWASHER

Model KDPM604KPS0

Near Colorado Springs, CO 80908

Aaron

Job Details: 01/12/2023

"Circulation motor vibrating on back bracket, corrected motor and grommet, tested unit and working well, no leaks.Advised of survey"

We serviced a

WHIRLPOOL WALLOVEN

Model WOC54EC0HS04

Near Rio Rancho, NM 87144

Joseph

Job Details: 01/12/2023

installed parts listed. unit tested good. unit is good to go.

We serviced a

MAYTAG WASHER

Model MVW7232HW0

Near Albuquerque, NM 87109

Larry

Job Details: 01/12/2023

Installed parts listed and tested good - Unit is good to go

We serviced a

WHIRLPOOL WALLOVEN

Model WOC54EC0HS04

Near Rio Rancho, NM 87144

Joseph

Job Details: 01/12/2023

installed parts listed. unit tested good. unit is good to go.

We serviced a

GENERAL ELECTRIC RANGE

Model JS645SL6SS

Near Granby, CO 80446

Erik

Job Details: 01/12/2023

remove door - replace inner glass

We serviced a

GENERAL ELECTRIC DRYER

Model GTD33GASK1WW

Near Fraser, CO 80442

Erik

Job Details: 01/12/2023

check vent - clearckeck gas connection -ok cable jumper disconnected at switch - re-connect and test - good

We serviced a

GENERAL ELECTRIC DISHWASHER - BUI

Model GDT550PYR3FS

Near Winter Park, CO 80482

Erik

Job Details: 01/12/2023

"connect to SmartHQ diagnosticALERT: failure to drain on at least 1 of the last 5 cycles - check F56 error code diagnostic actionsF56 failure to drain - physically check unit for drain kinks/sump check valve obstructions - none present - replace pumpclear f codes, install pump and test - good"

We serviced a

MAYTAG WASHER

Model MHW6630HW0

Near Santa Fe, NM 87507

Jason

Job Details: 01/12/2023

checked unit found control is not supplyong voltage to motor and snutting down SC$140.02LABOR$160.55MISC$17.50CONTROL#W11322883$287.69TX$23.59TOTAL$629.35Auth code:LECH94$140.02

We serviced a

JENN-AIR REFRIGERATOR

Model JFFCC72EHL03

Near Aspen, CO 81611

James R

Job Details: 01/12/2023

Seal that was on door inside outer lip came loose. replaced R.H. fresh food door seal. customer had opened box and layed out flat. seal fit really well. checked for sealing all the way around. Looks good. when try to open door can feel that the magnet is holding well. please fill out customer satisfaction survey. Thank You.

We serviced a

MAYTAG DRYER - ELECTRIC

Model MEDB855DC4

Near Colorado Springs, CO 80919

Jim

Job Details: 01/12/2023

found the unit would not heat in the normal setting replaced the control board unit test ok T A S

We serviced a

WHIRLPOOL DISHWASHER

Model WDF520PADM9

Near Calhan, CO 80808

Glenn

Job Details: 01/12/2023

"Install New Sump & Motor Assy, All OPS Test:OK, No Leaks, Installed Leak detector for safety."

We serviced a

WHIRLPOOL DRYER

Model WED4815EW1

Near Santa Fe, NM 87507

Jason

Job Details: 01/12/2023

installed part unit checks ok

We serviced a

SAMSUNG DRYER

Model DV42H5600EP/A3

Near Pueblo, CO 81005

Jonny

Job Details: 01/12/2023

"Noticed belt was off, put it back on, not hass com4, custy is nappy"

We serviced a

KITCHENAID REFRIGERATOR

Model KRFC704FBS01

Near Santa Fe, NM 87506

Jason

Job Details: 01/12/2023

installed gasket unit checks ok

We serviced a

FISHER & PAYKEL DISH DRAWER

Model DD24DV2T9 N

Near Woodland Park, CO 80863

Ralph

Job Details: 01/12/2023

"installed new rotor, still a little loud but the clicking noise has stopped, unit checked okay"

We serviced a

MAYTAG WASHER

Model MVW6230HW2

Near Albuquerque, NM 87110

Larry

Job Details: 01/12/2023

Installed parts listed and tested good - Unit is good to go

We serviced a

WHIRLPOOL DISHWASHER

Model WDF520PADM9

Near Rio Rancho, NM 87124

Joseph

Job Details: 01/12/2023

smell coming from dishwasher. customer only uses machine 3 times a month. leaves old water at the bottom of the filter. found debree inside filter. cleaned filter. machine is working as designed. unit tested good. unit is good to go.

We serviced a

WHIRLPOOL WASHER

Model WTW8500DC5

Near Los Alamos, NM 87544

Jason

Job Details: 01/12/2023

checked unit found unit was out of level causing unit to vibrate leveled unit. operation checks okAuth code:A94CM4 /for $129.25

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS315SDHZ08

Near Albuquerque, NM 87105

Larry

Job Details: 01/12/2023

Found the evap therm not in correct place - Defrosted evap and secured therm - Unit should be good to go

We serviced a

SAMSUNG ELECTRON REFRIGERATOR

Model RF28R7201SG/AA

Near Woodland Park, CO 80863

Ralph

Job Details: 01/12/2023

installed part and unit checked okay

We serviced a

MAYTAG WASHER

Model MVW7230HW0

Near Los Lunas, NM 87031

Larry

Job Details: 01/12/2023

Installed UI and tested good - Unit is good to go

We serviced a

SAMSUNG WASHER TOP LOAD

Model WA52A5500AC/US

Near Colorado Springs, CO 80925

Brandon

Job Details: 01/12/2023

Replaced pcb and tested op all ok hass passed and sent asked cx to complete survey

We serviced a

WHIRLPOOL MICROWAVE

Model KMHC319EBS3

Near Pueblo, CO 81001

James

Job Details: 01/12/2023

"Found door separating from frame causing short in ui. Needs door W11205125 501.61+tax, sc 89.95, labor 139.95, mps 14.50. Total : 787.14 cust declines at this time"

We serviced a

SUBZERO REFRIGERATOR

Model IC-24R

Near Colorado Springs, CO 80921

Jessie

Job Details: 01/12/2023

"Customer refrigerator door sticks out slightly. See quick pics. Customer says unit doesn't have suction like the freezer does. I explained why freezer has more.Had to call techline, for any recommendations for the door slightly sticking out. And there are none as of now. No adjustment #$149.95 CK Auth# MTM994"

We serviced a

JENNAIR OVEN

Model JDRP430WP01

Near Colorado Springs, CO 80908

Jerimiah

Job Details: 01/12/2023

"Installed replacement UI board, collected remainder per note. Unit check ok. Returning both cores in as of 1-13-23. $205.17 CC Auth# X9H9WM"

We serviced a

JENN-AIR WALLOVEN

Model JMW2430LL00

Near Colorado Springs, CO 80906

Ken

Job Details: 01/12/2023

Installed console and tested. Advised customer to call back if they have anymore issues

We serviced a

GE DRYER

Model GTD65EBSJ3WS

Near Colorado Springs, CO 80903

Ken

Job Details: 01/12/2023

Tightened up the screw on the back of the drum and tested sc+100 for labor 229.95 auth a4ju9e

We serviced a

GE COOKTOP

Model JP930K0C1CC

Near Elbert, CO 80106

Glenn

Job Details: 01/12/2023

"RF Burner not working, also LF Burner not working properly. Parts No Longer Available.Paid for both tickets on this job.129.95 1st appliance + 89.95 2nd Appliance = $219.90Tried to use customers cell phone, but it was unclear for them to procees app. Bypassed Sign on App, had sign on ticket. Autho#WYTHN9719-339-8854"

We serviced a

BIG CHILL REFRIGERATOR

Model G91629NW

Near Colorado Springs, CO 80908

Jessie

Job Details: 01/12/2023

Replaced icemaker sent to customer. Test op. All on

We serviced a

WHIRLPOOL RANGE

Model KSEG700EBS2

Near Pueblo, CO 81001

James

Job Details: 01/12/2023

"Found unit with f2e1 code indicating TouchPad issue, needs control assem W11091880 491 71+tax, sc 129.95, labor 169.95, mps 14.50. total: 846.43 cust declines at this time"

We serviced a

MAYTAG WASHER

Model MVW6200KW2

Near Pueblo, CO 81004

James

Job Details: 01/12/2023

"Found strike damaged causing unit to not advance cycle. Could not test drain pump but based on customers description most likely will need a drain pump as well. Need strike W11457841 +tax, sc 129.95, labor 149.95, mps 14.50. Total (pre pump) 331.17. If pump W11399437 is needed additional 183.52+tax. Cust declines at this time collected 129.95"

We serviced a

KITCHENAID DISHWASHER

Model KDFE204KPS0

Near Pueblo West, CO 81007

James

Job Details: 01/12/2023

Found element open causing no heat. Replaced with pre-ordered parts. All ops test good.

We serviced a

INSINKERATOR DISPOSAL

Model 79051

Near Pueblo West, CO 81007

James

Job Details: 01/12/2023

Installed preordered part. All ops test good no leaks found.

We serviced a

ASKO DISHWASHER

Model DF1664XXL.U

Near Pueblo, CO 81007

James

Job Details: 01/12/2023

Installed ordered parts all ops test good no leaks found

We serviced a

SUBZERO REFRIGERATOR

Model 690/S

Near Larkspur, CO 80118

Kris

Job Details: 01/12/2023

pulled im drilled out screws. cut bracket per tech sheet. cycled ice maker cx will monitor unit for 72 hours.

We serviced a

GENERAL ELECTRIC RANGE - ELECTRIC

Model JB735SP3SS

Near Palmer Lake, CO 80133

Kris

Job Details: 01/12/2023

replaced infinate switch ran test op with cx. cx is aware of 5 star survey.

We serviced a

WHIRLPOOL DRYER

Model WED4850HW0

Near Colorado Springs, CO 80923

Jeremy

Job Details: 01/12/2023

Burning smell may be coming out of back of dryer. Installlers taped vent to dryer leaving gaps for dryer vent air to escape into laundry room. Checked heating coil and nothing burning on it. Recommend CX to use duct clamp to replace foil tape. This is the same dryer as job#491898

We serviced a

WHIRLPOOL WASHER

Model WTW4855HW3

Near Colorado Springs, CO 80923

Jeremy

Job Details: 01/12/2023

Installe new cabinet. Test ran unit and double checked for leaks. Emailed athompson@classichomes.com about survey.

We serviced a

WHIRLPOOL DISHWASHER

Model WDT750SAKW0

Near Colorado Springs, CO 80907

Jim

Job Details: 01/12/2023

replaced the heat element as per project # 17304 unit test okT A S

We serviced a

WHIRLPOOL WASHER

Model WET4027HW1

Near Colorado Springs, CO 80907

Jim

Job Details: 01/12/2023

found the drain pump inop replaced the drain pump unit test ok

We serviced a

WHIRLPOOL FREEZER

Model WZF34X16DW06

Near Peyton, CO 80831

Jessie

Job Details: 01/12/2023

"- replaced evap and uv drier. test op, all ok5 star survey discussed"

We serviced a

GENERAL ELECTRIC WASHER

Model GTW335ASN1WW

Near Colorado Springs, CO 80911

Ken

Job Details: 01/12/2023

Installed basket and agitator

We serviced a

SAMSUNG RANGE - GAS

Model NX58H5600SS/AA

Near Colorado Springs, CO 80909

Jerimiah

Job Details: 01/12/2023

Installed replacement griddle burner valve. Unit check OK

We serviced a

MAYTAG DRYER - ELECTRIC

Model MED5500FW2

Near Colorado Springs, CO 80917

Jeremy

Job Details: 01/12/2023

installed new heating element and repair kit. Dryer is working as designed.

We serviced a

WHIRLPOOL REFRIGERATOR

Model KRFF507HPS03

Near Cripple Creek, CO 80813

Ralph

Job Details: 01/12/2023

installed part and unit chekcded okay

We serviced a

MAYTAG DISHWASHER

Model MDB8959SKB0

Near Colorado Springs, CO 80908

Aaron

Job Details: 01/12/2023

"Circulation pump hose clamps not firm, leaking water, loss of water in tub doesn't allow proper cleaning, inlet water hose dripping as well causing leak code. Corrected all and tested unit. Working well now. Advised of 5 star survey"

We serviced a

SAMSUNG DISHWASHER

Model DW80R5061US/AA00

Near Colorado Springs, CO 80922

Aaron

Job Details: 01/12/2023

"Tested unit through two Express cycles, small leak coming from inlet valve and tripping leak code Inlet valve DC62-30314L $147.64Tax $12.11Hc $129.95Labor $169.95Total job $459.6530 day estimateAuth 129.95 hc #94h3ew"

We serviced a

WHIRLPOOL DISHWASHER

Model WDF330PAHW4

Near Colorado Springs, CO 80918

Aaron

Job Details: 01/12/2023

"Circulation motor is shorted out, needs sump assem. Rest of unit is in good condition. Sump/motor assem. W11025157 $288.78Tax $ 23.68Hc $129.95Labor $169.95Total job $612.3630 day estimateAdvised of 5 star surveyAuth hc 129.95 #9xk3t4"

We serviced a

WHIRLPOOL WASHER

Model WTW5057LW0

Near Albuquerque, NM 87114

Joseph

Job Details: 01/12/2023

installed parts listed. unit tested good. unit is good to go.

We serviced a

SAMSUNG MICROWAVE

Model ME21M706BAG/AA

Near Colorado Springs, CO 80910

Brandon

Job Details: 01/12/2023

Replaced parts and tested op all ok asked cx to complete survey

We serviced a

SAMSUNG WASHER

Model WA50R5200AW/US

Near Colorado Springs, CO 80904

Brandon

Job Details: 01/12/2023

Replaced parts tested op all ok hass passed and sent asked cx to complete survey

We serviced a

SAMSUNG DRYER

Model DVE54R7600C/A3

Near Colorado Springs, CO 80915

Aaron

Job Details: 01/12/2023

"Thermal cut out is shorted out, not allowing unit to heat. Recommend having the vent professionally cleaned as well. Samsung techline believes check vent will reset after replacing the tco. Unit has good airflow at the back of the unit. Tco dc96-00887c $88.86Tax $7.29Hc $129.95Labor $169.95Total job $396.0530 day estimateAdvised of surveyAuth 129.95 hc # 9ty494"

We serviced a

MAYTAG WASHER

Model MVWB835DW4

Near Colorado Springs, CO 80916

Jim

Job Details: 01/11/2023

"placed unit in normal cycle to test with a towel, unit filled, agitated, spin out and drained unit test ok"

We serviced a

SAMSUNG DRYER

Model DV40J3000EW/A2

Near Colorado Springs, CO 80919

Aaron

Job Details: 01/11/2023

"Motor binding sound, took apart the unit and found zipper tag/debris in the blower wheel, cleared and checked over motor, starting fine now, if problem persists a motor and blower would be needed. Motor and blower assem dc93-00101uTotal parts $380.22Tax $31.18Hc $129.95Labor $169.95Total job $711.30No return on parts30 day estimateAdvised of survey hc 129.95 check auth #p39al4"

We serviced a

GENERAL ELECTRIC DISHWASHER

Model GDT695SSJ2SS

Near Colorado Springs, CO 80908

Glenn

Job Details: 01/11/2023

"Installed new Diverter Assy, In the process of re-installing manifold tube, Upper Spray Arm Clip fell off. Supposed to be welded to tub. Entire Tub would need to be replaced to fix unit. Tub Not Available, As confirmed w/ Marcone. Spoke w/ Scott in office, also informed customer."

We serviced a

SAMSUNG DRYER - ELECTRIC

Model DV45K6500E

Near Colorado Springs, CO 80911

Jim

Job Details: 01/11/2023

replaced the rear drum support wheels unit test ok

We serviced a

WHIRLPOOL DRYER

Model WED5050LW0

Near Colorado Springs, CO 80904

Jim

Job Details: 01/11/2023

"replaced the drum support wheels, the idler pulley and the drive belt unit test ok T A S"

We serviced a

MAYTAG WASHER

Model MVW4505MW0

Near Los Lunas, NM 87031

Larry

Job Details: 01/11/2023

CX complaint - Washer won't finish cycle - Inspected unit and found the washer aou of calibration - recalibrated and tested good - Unit is good to go

We serviced a

WHIRLPOOL COOKTOP

Model WCG97US6HS00

Near Colorado Springs, CO 80924

Jim

Job Details: 01/11/2023

replaced the center burner valve unit test ok

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRX735SDHZ07

Near Los Lunas, NM 87031

Larry

Job Details: 01/11/2023

Installed gasket and tested good - Unit is good to go

We serviced a

KITCHENAID REFRIGERATOR

Model KRSC700HPS04

Near Belen, NM 87002

Larry

Job Details: 01/11/2023

Installed reservoir

We serviced a

WHIRLPOOL DISHWASHER

Model WDF520PADM5

Near Pueblo, CO 81005

James

Job Details: 01/11/2023

Installed ordered parts all ops test good.

We serviced a

FISHER & PAYKEL RANGE

Model RGV2-305NN

Near Colorado Springs, CO 80922

Jerimiah

Job Details: 01/11/2023

Installed replacement power relay board. Unit check ok. Charged labor as quoted $199.45 CC Auth# 4X3WCT

We serviced a

MAYTAG REFRIGERATOR

Model MFI2269FRZ02

Near Belen, NM 87002

Larry

Job Details: 01/11/2023

Installed IM and tested good - Unit is good to go

We serviced a

JENNAIR MICRO DRAWER

Model JMDFS24JL00

Near Colorado Springs, CO 80919

Jerimiah

Job Details: 01/11/2023

"Unit not consistently heating, found switches misaligned. Adjusted switches to proper setting. Unit check ok. Disclosed survey to cust fcc."

We serviced a

AMANA WASHER

Model NTW4516FW3

Near Colorado Springs, CO 80915

Ken

Job Details: 01/11/2023

Installed basket and tested. Advised customer that issue was likely due to over loaded or unbalanced loads and to lighten the loads of heavier items so the machine will last longer.

We serviced a

GENERAL ELECTRIC MICROWAVE OVEN

Model JNM3163RJ5SS

Near Colorado Springs, CO 80916

Ken

Job Details: 01/11/2023

Installed cb and tested found loose connection on switch. Remove crimped and replaced. Unit is operating properly

We serviced a

VIKING RANGE ELECTRIC

Model VDSC485

Near Colorado Springs, CO 80906

Jerimiah

Job Details: 01/11/2023

Installed replacement bake element. Was unable to locate data plate. Charged service call and labor $339.90 CC Auth# 4LC9AT

We serviced a

SUBZERO REFRIGERATOR

Model BI48SD-0

Near Colorado Springs, CO 80906

Ralph

Job Details: 01/11/2023

"todd from subzero is diagnosing dirty electricty, suggested ordering a noise filter and plugging it in...cust paid total bill autho no. V493J3"

We serviced a

WHIRLPOOL COOKTOP

Model WCG97US6HS00

Near Monument, CO 80132

Kris

Job Details: 01/11/2023

installed gas covers all ok. cx is aware of 5 star survey.

We serviced a

GE WALL OVEN

Model CTS90DP3N1D1

Near Colorado Springs, CO 80904

Ken

Job Details: 01/11/2023

Installed ui and tested. Unit appears to be working properly advised customer to call us if she has anymore issues

We serviced a

MAYTAG DRYER

Model MEDC465HW0

Near Colorado Springs, CO 80909

Ken

Job Details: 01/11/2023

Completing out order. Customer said issue is resolved in precall