We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ01
Near Albuquerque, NM 87113
Larry
Job Details:
04/24/2023
Installed Kit and tested good - Unit is good to go
We serviced a
WHIRLPOOL WASHER
Model MVW7232HW0
Near Pueblo West, CO 81007
Brandon
Job Details:
04/24/2023
Replaced control and water valve tested op service diagnostics test passed components all ok also tightened loose rotor bolt
We serviced a
KENMORE REFRIGERATOR
Model 25360722000
Near Pueblo, CO 81001
James
Job Details:
04/24/2023
Found evap heater tie-down broken causing element to sag and melt plastic peg for bottom rack. Secured element with tie-down and tested. Ops ckok
We serviced a
SAMSUNG REFRIGERATOR
Model RF28R7351SR/AA
Near Pueblo West, CO 81007
Brandon
Job Details:
04/24/2023
Replaced ice maker parts and tested op all ok hass passed
We serviced a
SAMSUNG REFRIGERATOR
Model RF23J9011SR/AA
Near Pueblo, CO 81008
James
Job Details:
04/24/2023
Cust stated that unit ran fine for until they went to bed. When they woke up they found refrigerator leaking substantially from ice compartment down front of unit and to the floor. Upon arrival tested unit throughly could find no leak present once water turned back on. Left litmus (see quickpicks) and advised cust to monitor and take video if leak reappears
We serviced a
SAMSUNG WASHER
Model WA50M7450AW/A4
Near Colorado Springs, CO 80927
Jeremy
Job Details:
04/24/2023
Installed new gearcase. Ran test cycle with no issues. Ran HASS and gat a pass. Unable to ask home owner to complete survey.
We serviced a
SAMSUNG DRYER
Model DVE45R6100
Near Colorado Springs, CO 80907
Jeremy
Job Details:
04/24/2023
Outlet miss wired. CX will have electrician fix it. SC $129.95 Auth:NVFHU3
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ0
Near Colorado Springs, CO 80906
Carlos
Job Details:
04/24/2023
Loose hose on Circ pump. Reattached and tighten with new clamp. Runs ok
We serviced a
SAMSUNG DISHWASHER
Model DW80M9550UG
Near Colorado Springs, CO 80918
Jeremy
Job Details:
04/24/2023
Door seal wasnt aligned. Fixed and isnt leaking.
We serviced a
JENNAIR RANGE
Model JGRP436HL01
Near Colorado Springs, CO 80908
Aaron
Job Details:
04/24/2023
"Scratches on front panel, removed and inspected new panel, no scratches or dents, replaced and tested, unit is working well. Property is vacant, unable to obtain signature or advise of survey."
We serviced a
WHIRLPOOL RANGE
Model WFG320M0MS0
Near Los Lunas, NM 87031
Larry
Job Details:
04/24/2023
CX complaint - Oven too cold - Inspected unit and found the oven would heat up but would not cycle back on - Checked and found the air mixture wide open - Adjusted mixture and tested good - Uniy is good to go
We serviced a
SAMSUNG DRYER
Model DVE45T6000W/A3
Near Colorado Springs, CO 80908
Jeremy
Job Details:
04/24/2023
Helped JB with stacked dryer.
We serviced a
JENNAIR WALLOVEN
Model JJW2730WS02
Near Colorado Springs, CO 80919
Aaron
Job Details:
04/24/2023
"Replaced appliance control, tested and not heating, discussed with techline, believed to have a damaged UI control as well, needs UI control, verified that door switches and correct power are present.W10617330 ui control $1432.15Tax $117.44Total job $1,549.5930 day estimateNo return on parts"
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS01
Near Colorado Springs, CO 80924
Aaron
Job Details:
04/24/2023
"Replaced parts and ran unit through diagnostics, ice maker harvested and filled, water dispenser working, and deli drawer control is working now. Advised of survey"
We serviced a
SAMSUNG DRYER
Model DVE45T6000W/A3
Near Colorado Springs, CO 80908
Jonny
Job Details:
04/24/2023
"Installed parts, gave her dryer education, hass passed"
We serviced a
SUBZERO REFRIGERATOR
Model 736TCI3
Near Colorado Springs, CO 80906
Jessie
Job Details:
04/24/2023
"- pulled the unit, and left on the mat. waiting on floors to be done"
We serviced a
WOLF STOVE
Model DF366
Near Colorado Springs, CO 80906
Jessie
Job Details:
04/24/2023
- hinges are bad on the door.hinge#812272 $119.06hinge#812274 $213.96logo#815575 $70.32total parts $403.34tax $33.07sc $99.95$14.50labor $189.95total $740.81- customer wants to think about repair.
We serviced a
WHIRLPOOL WASHER
Model WFW6620HW2
Near Albuquerque, NM 87106
Larry
Job Details:
04/24/2023
Installed console and tested good - Unit is good to go
We serviced a
WHIRLPOOL RANGE
Model KFGC500JSS01
Near Albuquerque, NM 87110
Joseph
Job Details:
04/24/2023
CX WORRIED ABOUT THE KNOBS BEING VERY EASY TO TURN. INSPECT UNIT. UNIT IS WORKING AS DESIGNED BUT THE THE TWO FEONT BURNERS TAKE TO LONG TO IGNITE AND JUST LETS THE GAS OUT. I DID LET THE CUSTOMER KNOW THE FRONT IGNITERS DO NEED TO BE REPLACED. CUSTOMER DENIED REPAIR. THE CUSTOMER IS VERY DISAPPOINTED WITH THE DESIGN AND JUST WANTS HER MONEY BACK. CALLED SAFETY TEAM AND LET THEM KNOW WHAT I FOUND AND HAVE EVERYTHING DOCUMENTEDWPL SAFETY REFERENCE NUMBER: 7736091231
We serviced a
SUBZERO REFRIGERATOR
Model ID-30CI
Near Colorado Springs, CO 80906
Jessie
Job Details:
04/24/2023
"- replaced compressor, charged unit, ran diagnostics, all ok"
We serviced a
MAYTAG WASHER
Model MVW6200KW2
Near Albuquerque, NM 87112
Jason
Job Details:
04/24/2023
installed strike unit checks ok
We serviced a
GE DISHWASHER
Model GDF535PSR0SS
Near Colorado Springs, CO 80926
Jessie
Job Details:
04/24/2023
"- customer has poured bleach into the unit to try and get rid of smell. THEY ARE VERY WARNED THAT THIS COULD HAVE CAUSED FURTHER ISSUES (SEALS, MOTORS, ECT) CONTROL#WD21X31740 $204.72TAX $16.79SC $129.95$14.50LABOR $179.95TOTAL $545.91CUSTOMER DECLINES AT THE MOMENT."
We serviced a
SAMSUNG REFRIGERATOR
Model RF28N9780SG/AA
Near Pueblo West, CO 81007
Kris
Job Details:
04/24/2023
installed all parts sent ran test op all ok unit is working to spec at this time.
We serviced a
MAYTAG WASHER
Model MVWC565FW1
Near Colorado Springs, CO 80906
Carlos
Job Details:
04/24/2023
installed parts runs ok. Customers cold supply valve leaks. Needs plumber
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ04
Near Colorado Springs, CO 80906
Carlos
Job Details:
04/24/2023
Install Listed parts all ok
We serviced a
MAYTAG WASHER
Model MVW7230HW1
Near Albuquerque, NM 87111
Jason
Job Details:
04/24/2023
checked unit found unit was not adding enough water before agitating causing agitator to be extra noisy. ran calibration cycle unit checks ok
We serviced a
GE REFRIGERATOR
Model GWE19JSLNFSS
Near Colorado Springs, CO 80910
Jessie
Job Details:
04/24/2023
"- customer has the correct filter, but its differemt from what is in the unit. filter snaps correctly in place but has no water flow, put old filter in and we have water flow. called techline to see if any changes. customer needs to reach out to consumer relations. 800-386-1215."
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706EBS01
Near Colorado Springs, CO 80921
Jessie
Job Details:
04/24/2023
"- replaced evap fan again due to sitting in ice and control, test op, all ok"
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF507HPS03
Near Manitou Springs, CO 80829
Carlos
Job Details:
04/24/2023
Installed listed parts runs ok.
We serviced a
GENERAL ELECTRIC RANGE - ELECTRIC
Model PB935YP5FS
Near Colorado Springs, CO 80919
Ken
Job Details:
04/24/2023
Installed new top and tested. Advised customer to call back right away if the white marks come back
We serviced a
WHIRLPOOL DRYER
Model WED5605MW0
Near Colorado Springs, CO 80906
Ken
Job Details:
04/24/2023
Breaker was tripped. Tested dryer for 15 mins to make sure it would not trip breaker again. Charge is 89.95 combining pay to customers second order 499552 auth 43n34j
We serviced a
SAMSUNG REFRIGERATOR
Model RF25HMEDBBC/AA
Near Colorado Springs, CO 80919
Jonny
Job Details:
04/24/2023
"Installed parts, not hass compatible, gave custy fridge education"
We serviced a
WHIRLPOOL M/W OTR
Model WMH53521HZ06
Near Albuquerque, NM 87122
Jason
Job Details:
04/24/2023
SR7736248933INSTALLED BOTH PARTS UNIT CHECKS OK
We serviced a
WHIRLPOOL WASHER
Model WFW5620HW3
Near Edgewood, NM 87015
Jason
Job Details:
04/24/2023
checked unit found unit opperation is as designed cx to use extra rinse and fabric softener also to use dryer to help reduce lint SR7736253100
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHV08
Near Eagle, CO 81631
Antonio
Job Details:
04/24/2023
insatalled new icemaker unit tested good
We serviced a
BOSCH DISHWASHER
Model SHV68T53UC/04
Near Colorado Springs, CO 80906
Ken
Job Details:
04/24/2023
Customer had e15 unplugged it for the last 4 weeks. Tested and dw operated properly. Obstruction softened and cleared itself tested on different cycles to make sure operation is good. Collecting 149.95 + 89.95 for order 500244 for a total of 239.90 auth 43n34j
We serviced a
JENNAIR WALLOVEN
Model JJW2830DP01
Near Albuquerque, NM 87110
Larry
Job Details:
04/24/2023
Installed console and tested good - Unit is good to go - Collected $301.94-Auth- VW4MH3Trip-$129.95Labor-$149.95Tax-$22.04
We serviced a
SAMSUNG DRYER
Model DVE55A7700V/A3
Near Colorado Springs, CO 80908
Jonny
Job Details:
04/24/2023
"Installed part, called the help line for hass"
We serviced a
SAMSUNG REFRIGERATOR
Model RF263BEAESR/AA
Near Colorado Springs, CO 80916
Jonny
Job Details:
04/24/2023
"Handle was broke, had to adjust and reset it, gave her fridge education, custy is pleased"
We serviced a
SAMSUNG DRYER - ELECTRIC
Model DVE45N5300F/A3
Near Pueblo West, CO 81007
Brandon
Job Details:
04/24/2023
Replaced pcb and sub pcb tested op all ok hass passed
We serviced a
SAMSUNG DRYER
Model DVE45T6000V/A3
Near Colorado Springs, CO 80925
Jonny
Job Details:
04/24/2023
"This is a electrical issue, gave custy dryer education"
We serviced a
WHIRLPOOL M/W OTR
Model WMH32519HZ7
Near Grand Junction, CO 81507
James R
Job Details:
04/24/2023
Unit has pwr. checked service matters wire diagram pwr comes directly from control. Issue is the control. Relay on control is stuck and wont open when shut off. Customer will replace unit. Customer paid service call $149.00 Auth code 4RKH43
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT112CZJW00
Near Colorado Springs, CO 80904
Carlos
Job Details:
04/24/2023
Called tech line Austin 7736253280. Tilt filter drier to 45 degree angle per tech line customer will observe.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHM05
Near Clifton, CO 81520
James R
Job Details:
04/24/2023
replaced connectors at the water line to door under frig. Ran water several glasses full. Could see no dripping. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ15
Near Rio Rancho, NM 87144
Joseph
Job Details:
04/24/2023
Installed part listed. Unit tested good. Unit is good to go.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ02
Near Eagle, CO 81631
Antonio
Job Details:
04/24/2023
installed new acu and ui board unit tested good
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHM08
Near Parachute, CO 81635
James R
Job Details:
04/24/2023
Installed a checked valve connector 8201815 in dispenser water line in place of the one that is usually there. Ran several glasses of water thru and did not drip. Put foam padding between card board and condenser and condenser and upper wall in the front behind kick plate. To limit the noisy vibration. Ok.Please fill out whirlpool tech satisfaction survey. Thank You.; used 1 8201815 (connector) from stock
We serviced a
THERMADOR DISHWASHER
Model DWHD650WFP/15
Near Aspen, CO 81611
Erik
Job Details:
04/24/2023
installJOB COMPLETE!
We serviced a
GE WASHER
Model PTW600BSR1WS
Near Glenwood Springs, CO 81601
Erik
Job Details:
04/24/2023
install part/test: GOODJOB COMPLETE!
We serviced a
GE WASHER
Model PTW600DSRN1WS
Near Silt, CO 81652
Erik
Job Details:
04/24/2023
ui not respondingconnect to smartHQ service:F10 ACTIVE: mode shift feedback monitor (cancels cycle)firmware update appliedspin test: passerror does NOT return after updateJOB COMPLETE!
We serviced a
WHIRLPOOL WASHER
Model MVW7232HW0
Near Colorado Springs, CO 80924
Jeremy
Job Details:
04/24/2023
PCB was supposed to be at CXs house but CX did not recieve. Replaced UI. Selector knob is now working correctly. Repair is complete.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ01
Near Albuquerque, NM 87113
Larry
Job Details:
04/24/2023
Installed Kit and tested good - Unit is good to go
We serviced a
WHIRLPOOL WASHER
Model MVW7232HW0
Near Pueblo West, CO 81007
Brandon
Job Details:
04/24/2023
Replaced control and water valve tested op service diagnostics test passed components all ok also tightened loose rotor bolt
We serviced a
KENMORE REFRIGERATOR
Model 25360722000
Near Pueblo, CO 81001
James
Job Details:
04/24/2023
Found evap heater tie-down broken causing element to sag and melt plastic peg for bottom rack. Secured element with tie-down and tested. Ops ckok
We serviced a
SAMSUNG REFRIGERATOR
Model RF28R7351SR/AA
Near Pueblo West, CO 81007
Brandon
Job Details:
04/24/2023
Replaced ice maker parts and tested op all ok hass passed
We serviced a
SAMSUNG REFRIGERATOR
Model RF23J9011SR/AA
Near Pueblo, CO 81008
James
Job Details:
04/24/2023
Cust stated that unit ran fine for until they went to bed. When they woke up they found refrigerator leaking substantially from ice compartment down front of unit and to the floor. Upon arrival tested unit throughly could find no leak present once water turned back on. Left litmus (see quickpicks) and advised cust to monitor and take video if leak reappears
We serviced a
SAMSUNG WASHER
Model WA50M7450AW/A4
Near Colorado Springs, CO 80927
Jeremy
Job Details:
04/24/2023
Installed new gearcase. Ran test cycle with no issues. Ran HASS and gat a pass. Unable to ask home owner to complete survey.
We serviced a
SAMSUNG DRYER
Model DVE45R6100
Near Colorado Springs, CO 80907
Jeremy
Job Details:
04/24/2023
Outlet miss wired. CX will have electrician fix it. SC $129.95 Auth:NVFHU3
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ0
Near Colorado Springs, CO 80906
Carlos
Job Details:
04/24/2023
Loose hose on Circ pump. Reattached and tighten with new clamp. Runs ok
We serviced a
SAMSUNG DISHWASHER
Model DW80M9550UG
Near Colorado Springs, CO 80918
Jeremy
Job Details:
04/24/2023
Door seal wasnt aligned. Fixed and isnt leaking.
We serviced a
JENNAIR RANGE
Model JGRP436HL01
Near Colorado Springs, CO 80908
Aaron
Job Details:
04/24/2023
"Scratches on front panel, removed and inspected new panel, no scratches or dents, replaced and tested, unit is working well. Property is vacant, unable to obtain signature or advise of survey."
We serviced a
WHIRLPOOL WASHER-DRYER COM
Model WET4027HW1
Near Colorado Springs, CO 80908
Aaron
Job Details:
04/21/2023
"Replaced suspension and tested unit, working well now. Advised customer of 5 star survey"
We serviced a
WHIRLPOOL DRYER
Model MEDB765FC0
Near Los Ranchos de Albuquerque, NM 87114
Joseph
Job Details:
04/21/2023
Unit turning on but wont start. Ran diagnostics. Unit displaying F2E1 error code which means a signal issue from the console to the control. A simple hard reset was performed. Dryer is now working properly and is good to go. Charged customer 129.95 for service charge$141.38 CC Auth# LK9R3T
We serviced a
GENERAL ELECTRIC MICROWAVE OVEN
Model PEB9159SJ3SS
Near Peyton, CO 80831
Aaron
Job Details:
04/21/2023
"Unit was replaced, picked up parts that were shipped to the customer."
We serviced a
MAYTAG WASHER
Model MVWC565FW2
Near Colorado Springs, CO 80918
Glenn
Job Details:
04/21/2023
"washer sensor water level issues.Reseat connections, All OPS Test:OK"
We serviced a
GENERAL ELECTRIC DISHWASHER - BUI
Model CDT845P4NW2
Near Yoder, CO 80864
Kris
Job Details:
04/21/2023
checked for leaks installed leak strip all ok cx will monitor.
We serviced a
BOSCH DISHWASHER
Model SHPM65Z55N/20
Near Cañon City, CO 81212
James
Job Details:
04/21/2023
Installed parts tested ops all ck ok
We serviced a
WHIRLPOOL PEDESTAL
Model WFP2715HC0
Near Grand Junction, CO 81505
James R
Job Details:
04/21/2023
"It is normal for the pedistal to be shorter than the washer. loosened the front mounting screws and did find screw holes in washer that line up with pedistal. In the rear. 2 were missing, installed 4 screws so unit is mounted properly. Right side of drawer rail not on properly. Installed right.Please fill out whirlpool tech satisfaction survey. Thank You."
We serviced a
MAYTAG WASHER
Model MVW4505MW0
Near Cañon City, CO 81212
James
Job Details:
04/21/2023
"Found control mounting screws backed out causing problems when trying to press start button. Secured screw, leveled unit and tested unit. No issues found. All ops test good."
We serviced a
UNIQUE OVEN
Model UGP-24CR B
Near Cañon City, CO 81212
James
Job Details:
04/21/2023
Adjusted temperature bulb Position and tested temperatures all check OK
We serviced a
BOSCH DISHWASHER
Model SHPM65Z55N/20
Near Cañon City, CO 81212
James
Job Details:
04/21/2023
Found loose clamp on drain pump causing small leak. Also found stand pipe backing up. Secured clamp on drain hose and advosed cust to have licensed plumber out to address stand pipe. All ops test good
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRQA59CNKZ01
Near Florence, CO 81226
James
Job Details:
04/21/2023
Talked survey. Found ice maker not installed properly causing water buildup in tray that froze into supply line cleared out and thawed ice buildup. Tested. All ops test good.
We serviced a
KITCHENAID WALLOVEN
Model KOCE500ESS09
Near Albuquerque, NM 87111
Jason
Job Details:
04/21/2023
checked unit found wave guide is damaged causing mag to get damaged and take inverter out. wave guide wave guide is non repairableAuth code:W4E939$140.02
We serviced a
KITCHENAID DISHWASHER
Model KDTE254ESS2
Near Colorado Springs, CO 80910
Carlos
Job Details:
04/21/2023
Installed listed parts. All ok.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF757SDHV00
Near Colorado Springs, CO 80926
Carlos
Job Details:
04/21/2023
INSTALLED LISTED PARTS. ALL OK
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ0
Near Colorado Springs, CO 80906
Carlos
Job Details:
04/21/2023
Installed parts customer paid labor $218.44 CC Auth# 3RU3VJ
We serviced a
MAYTAG WASHER
Model MVWB850YG1
Near Colorado Springs, CO 80906
Carlos
Job Details:
04/21/2023
Needs a new tub and drive assembly. Customer will not repair $149.44 CC Auth# Y34U3J
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Albuquerque, NM 87122
Jason
Job Details:
04/21/2023
"checked unit found actuator failed causing cam to grind again installed actuator and cam unit checks ok; used 1 w10721967 (cam), and 1 w11481722 (actuator) from stock"
We serviced a
KITCHENAID RANGE
Model KFGD500EBL03
Near Albuquerque, NM 87112
Jason
Job Details:
04/21/2023
installed ignitor unit checks ok
We serviced a
WHIRLPOOL WASHER
Model wfw88heawo
Near Albuquerque, NM 87123
Jason
Job Details:
04/21/2023
checked unit found upper led on display is dead causing an issue with reading display cx does not want to repair display ck 04/21/23 $140.02 AUTHO#JP3LX3
We serviced a
WHIRLPOOL DRYER
Model WED6120HW0
Near Colorado Springs, CO 80904
Carlos
Job Details:
04/21/2023
Installed listed parts runs all ok
We serviced a
THERMADOR WALL OVEN
Model CM302US
Near Colorado Springs, CO 80906
Jerimiah
Job Details:
04/21/2023
"Oven beeps during and after use, sometimes has had f24 error code, most likely due to moisture. Found scorch marks on oven door frame due to heat loss, bad gaskets on both doors and hinges on upper door are bad, hinges are discontinued, told cust if he can find parts that labor can still be done on unit within 30 days no service charge. Labor will be $169.95 for one door $189.95 for both doors. Charged service call $149.95 CC Auth# C4494U00414543 gasket $139.1200488417 hinge x2 discontinued."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRV986FDEM01
Near Albuquerque, NM 87120
Larry
Job Details:
04/21/2023
Installed gasket and tested good - Unit is good to go
We serviced a
MAYTAG WASHER
Model MVW4505MW0
Near Albuquerque, NM 87120
Larry
Job Details:
04/21/2023
CX complaint - Lid won't lock - Inspected unit and found the latch failed - Replaced with pre-id parts and tested good - Unit is good to go
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ0
Near Colorado Springs, CO 80917
Glenn
Job Details:
04/21/2023
"Error f2e2 > UI cannot communicate with maincontrol. Loose UI connection. Bad UI Control, Install New UI Control, All OPS Test:OK"
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ1
Near Peyton, CO 80831
Aaron
Job Details:
04/21/2023
"Water valve not fully opening, circulation motor is shorted out as well, replaced parts and tested unit, working well now. Advised customer of 5 star survey."
We serviced a
KITCHENAID WALLOVEN
Model KOCE900HSS02
Near Colorado Springs, CO 80920
Glenn
Job Details:
04/21/2023
Install New TOD Themostat & Blower. Had to pull unit out a few times to correct fan noise. All OPS Test:OK
We serviced a
JENNAIR RANGE
Model JDRP436HL01
Near Monument, CO 80132
Glenn
Job Details:
04/21/2023
"Valves were sticking, but now working as designed. Able to break controls free."
We serviced a
JENNAIR RANGE
Model JGC3536GS00
Near Colorado Springs, CO 80919
Glenn
Job Details:
04/21/2023
LR Burner broken. Install New LR Ignitor & Burner Head. All OPS Test:OK
We serviced a
WHIRLPOOL WASHER
Model WFW5605MW0
Near Rio Rancho, NM 87144
Joseph
Job Details:
04/21/2023
Unit making clicking noise when in spin cycle. Inspect unit and ran diagnostics. Moved drain hose away from unit and had to level the unit again. Noise has stopped. Unit tested good. Unit is food to go
We serviced a
WHIRLPOOL DRYER - ELECTRIC
Model WED5620HW1
Near Colorado Springs, CO 80919
Glenn
Job Details:
04/21/2023
"Reseat connections to PCB. All OPS Test:OK, No Burning Smells. Slight restriction in vent system, suggest customer have vent system cleaned once per year. Also suggest using Timed Dry cycle to void possibilty of moisture sensor issue."
We serviced a
WHIRLPOOL WASHER
Model MVW7232HW0
Near Albuquerque, NM 87120
Larry
Job Details:
04/21/2023
Installed cantrol and watched an entire Quick Wash cycle complete - Unit is operating as designed
We serviced a
MAYTAG WASHER
Model MVW6230HW0
Near Pueblo, CO 81001
Ken
Job Details:
04/21/2023
Tested washer all ops were good. Factory calibrated and did factory cycle. Advised customer to run clean washer twice a month as recalibration is built in to that cycle
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHZ04
Near Grand Junction, CO 81506
James R
Job Details:
04/21/2023
Replaced Ice contriner and chute. Test op's good. Please fill whirlpool tech satisfaction survey. Thank You.
We serviced a
SAMSUNG REFRIGERATOR
Model RF28R7201SG/AA
Near Monument, CO 80132
Amos
Job Details:
04/21/2023
Ran Hass replaced all new parts customer is satisfied.
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5241SR/AA
Near Colorado Springs, CO 80920
Jeremy
Job Details:
04/21/2023
Installed new parts. I then identified a leak at back top right side (see pic) and called tech support. TS declared unit non repariable and provided this #7005493541 (sra exchange). I gave CX provided number and told CX that Samsung would contact them.
We serviced a
SAMSUNG DISHWASHER
Model DW80R5060UG/AA
Near Colorado Springs, CO 80923
Jeremy
Job Details:
04/21/2023
Issue is that metal frame that holds door seal in place is detaching from tub. Cannot run HASS because unit is uninstalled with no water or electric. Tech support declared unit unrepairable. 7005493871 Asked CX to complete survey.
We serviced a
MAYTAG WASHER
Model MVW6230HW2
Near Grand Junction, CO 81503
James R
Job Details:
04/21/2023
F7E1 Tach missing or wrong signal Motor just hums.F7E6 Motor circuit open. Motor is ok. Cleared codes. Capacitor bad replaced.Test run in diagnostics. agitate and spins op's good.Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
WHIRLPOOL DRYER
Model WED5605MW0
Near Colorado Springs, CO 80908
Jeremy
Job Details:
04/21/2023
Installed new parts and unit still isnt powering on so I Contacted tech support F# 7736237140. Issue is incoming voltage related and CX is recommended to contact electrician.
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Grand Junction, CO 81503
James R
Job Details:
04/21/2023
F7E6 Motor circuit open. Test in service diagnostics when goes in to agitate or spin just hums. Replaced capacitor. W11395618 Test again in diagnostics op's good no codes at end of cycle. Customer paid $297.57 auth code MP9VUN Please fill out whirlpool tech satisfaction survey. Thank You.; used 1 W11395618 (Capacitor) from stock