We serviced a
WHIRLPOOL RANGE
Model WFG505M0MS0
Near Albuquerque, New Mexico 87108
Jason
Job Details:
03/13/2024
checked unit found gas line going to burners was loose at reggulator tightened connection unit checks oksr7738677471
We serviced a
MAYTAG WASHER
Model MHW5630HW3
Near Colorado Springs, Colorado 80911
Carlos
Job Details:
03/13/2024
"Installed door latch ran test, all ok"
We serviced a
MAYTAG WASHER
Model MVW7232HW0
Near Pueblo West, Colorado 81007
James
Job Details:
03/13/2024
installed ordered part. tested ops all ckok. collected 159.95 $179.95 CC Auth# 3W49NH
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Glenwood Springs, Colorado 81601
James R
Job Details:
03/13/2024
Customer signed disclaimer. F3E1 Pressure system faultF8E1 no fill long fillF2E1 stuck keyF9E1 long drain Cleared codes. Checked pressure tube to tub and control. Was kinked at tub cut out kinked area and reattach hose properly. Test unit rinse and spin. Operating as should. Please fill out whirlpool tech satisfaction surv ey. Thank You.
We serviced a
WOLF RANGE
Model GR486G
Near Colorado Springs, Colorado 80920
Jessie
Job Details:
03/13/2024
Replaced fr burner assy. Teat ops on all. Ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHZ05
Near Monument, Colorado 80132
Glenn
Job Details:
03/13/2024
Install New LS Freezer Door. Swap parts from old door to new door. All OPS Test:OK
We serviced a
MAYTAG DRYER ELECTRIC
Model MED6230HW1
Near Colorado Springs, Colorado 80921
Glenn
Job Details:
03/13/2024
"No power at UI, no light on iside either. Breaker not tripped. SRC 244VAC, Power good at Main PCB, Door Switch > Good, 12VDC from Main PCB to UI Control, Bad Control. Techline: Bad Main PCB & UI Control , SR #7738676366 , Main PCB - W11406681 $298.67 , UI Control - W11413566 $336.55 , Tax $52.09 , MPS $14.50 , SC Fee $129.95 , Labor $169.95 , Declined Estimate, Wants to buy new unit. Paid SC Fee of $129.95 via check #3446 , Autho # CHXCU3 , Customer said don't bother securing lid on top of unit, since they are getting rid of unit."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ04
Near Colorado Springs, Colorado 80921
Glenn
Job Details:
03/13/2024
"Install New LS Door, Swap parts from old door to new door. Adjust Door Gasket, Apply vinyl repair kit for crack repair. All OPS Test:OK , Customer satisfied with New door and end results."
We serviced a
GE DISHWASHER
Model GDT550PYR3FS
Near Pueblo, Colorado 81005
James
Job Details:
03/13/2024
Installed ordered parts tested operations I'll check OK left litmus
We serviced a
SAMSUNG DRYER
Model DV48H7400EW/A2
Near Colorado Springs, Colorado 80918
Jessie
Job Details:
03/13/2024
Unit has bad statt winding on motorMotor#DC31-00055G $353.02Tax $28.95Sc $129.95Msrp $14.50Labor $189.95Total $716.36Customer wants to think about repair
We serviced a
WOLF VENT HOOD
Model PL341912
Near Colorado Springs, Colorado 80906
Ralph
Job Details:
03/13/2024
"replaced part and unit checked okay, dealing with the builder no POP"
We serviced a
SUB ZERO REFRIGERATOR
Model BI48S/
Near Pueblo, Colorado 81005
James
Job Details:
03/13/2024
found unit leaking from work that previous plumber did to shut off. cust wants plumber out to fix their previous work. reset icemaker and advised cust to get leaks sorted and see if ice production begins collected 149.95 $149.95 CC Auth# LU4NY3
We serviced a
WHIRLPOOL DRYER
Model WED4950HW0
Near Rifle, Colorado 81650
James R
Job Details:
03/13/2024
Customer signed disclaimer. Installed a dryer kit. 4392065 Did find vent crushed did adjust and test run ok there is still restriction. But customer needs to have vent of home cleaned and vent behind properly done. Please fill out whirlpool tech satisfaction survey. Thank You. ; used 1 4392065 (Dryer Kit (2 Roller)) from stock
We serviced a
SUB ZERO FREEZER
Model IC-24FI-LH
Near Pueblo, Colorado 81004
James
Job Details:
03/13/2024
found unit not making ice. replaced with preordered icemaker. tested ops all ckok left litmus
We serviced a
AMANA DRYER
Model NED4655EW1
Near Pueblo, Colorado 81003
Domingo
Job Details:
03/13/2024
Replace heat element with cut off and dryer is heating
We serviced a
KITCHENAID WALL OVEN
Model KOSE500ESS20
Near Colorado Springs, Colorado 80924
Jerimiah
Job Details:
03/13/2024
"Tested unit, unit was previously repaired by installers/builders. Cleared error code F9E0 in diags, ran bake/broil. Unit check ok"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ18
Near Colorado Springs, Colorado 80925
Carlos
Job Details:
03/13/2024
"Removed ice bin, too many ice cubes in chute, removed. All ok"
We serviced a
MIDEA DRYER
Model MLE45N3BWW
Near Colorado Springs, Colorado 80925
Roman
Job Details:
03/13/2024
"Installed safety switch, thermostat and temps sensor. Ran the dryer and made sure dryer is working properly. Dryer working great."
We serviced a
MAYTAG DRYER
Model MED6230HW0
Near Colorado Springs, Colorado 80927
David
Job Details:
03/13/2024
Heater element burned-out Replaced element Tested and is working good Let them know that a restricted vent is the main cause for element failure.
We serviced a
WHIRLPOOL DRYER
Model WHD862CHC2
Near Rifle, Colorado 81650
James R
Job Details:
03/13/2024
Printed labels took pics ready to send.
We serviced a
BOSCH DISHWASHER
Model SHXM98W75N/01
Near Colorado Springs, Colorado 80904
Ralph
Job Details:
03/13/2024
"appears the mounting screw on the left side was not screwed in correctly so the door was not closiing correctly and just kept popping open, screwed ion the scrrew and seemedd to fix issue"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHB05
Near Aspen, Colorado 81611
James R
Job Details:
03/12/2024
Replaced diffuser makes a terrible clicking noise. Replaced evporator motor and blade due to vibration. Also sealer melted off of evaporator tubing. Replaced. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
SHARP MICROWAVE DRAWER
Model F7DMW24S2
Near Colorado Springs, Colorado 80904
Jerimiah
Job Details:
03/12/2024
Unit is a SHARP microwave. Cust will have to contact sharp and get them to dispatch repairs for correct unit. Took QP pic of Sharp unit well be expecting to service. Closing call
We serviced a
MAYTAG WASHER
Model MVW7232HC2
Near Belen, New Mexico 87002
Larry
Job Details:
03/12/2024
Installed UI and tested good
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Albuquerque, New Mexico 87120
Larry
Job Details:
03/12/2024
CX complaint - Drum not turning - Inspected unit and found the belt failed - REplaced with TS and tested good - Unit is good to go; used 1 4392065 (Dryer Kit (2 Roller)) from stock
We serviced a
MAYTAG TOP-LOAD WASHER
Model MVWB865GW1
Near Colorado Springs, Colorado 80917
Glenn
Job Details:
03/12/2024
"Install New Lid, Hinges & Bearings. All OPS Test:OK"
We serviced a
SAMSUNG REFRIGERATOR
Model RF28JBEDBSR/AA
Near Peyton, Colorado 80831
Brandon
Job Details:
03/12/2024
Replaced ice maker parts and tested op all checks ok hass not compatible
We serviced a
GE REFRIGERATOR/TOP
Model GYE22GENGDS
Near Carbondale, Colorado 81623
Erik
Job Details:
03/12/2024
"install compressor ,charge system verify operation,using smartHQ service app.CX not available for signature"
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near Santa Fe, New Mexico 87507
Jason
Job Details:
03/12/2024
installed parts unit checks ok
We serviced a
BOSCH REFRIGERATOR
Model B36CT80SNS/09
Near Carbondale, Colorado 81623
Erik
Job Details:
03/12/2024
install door.jobcomplete.CX not available for signature
We serviced a
MAYTAG WASHER
Model MVWC565FW1
Near Los Alamos, New Mexico 87544
Jason
Job Details:
03/12/2024
Installed parts unit opperation checks ok
We serviced a
GE REFRIGERATOR
Model GZS22IYNXHFS
Near Glenwood Springs, Colorado 81601
Erik
Job Details:
03/12/2024
connect to smartH service:NO ERROR CODEStest compressor using GE smartHQ app - NORMAL OPERATING NOISE AND VOLUMECX must call GE 1-800-432-2737 for instruction/ use and care educationcase # 12486832
We serviced a
BOSCH REFRIGERATOR
Model B36CT81ENS/02
Near Glenwood Springs, Colorado 81601
Erik
Job Details:
03/12/2024
replace freezer door parts already on site . customer verbally confirmed signature
We serviced a
KITCHENAID REFRIGERATOR
Model KRSC700HPS06
Near Santa Fe, New Mexico 87501
Jason
Job Details:
03/12/2024
installed valve unit checks ok
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF507HPS00
Near Santa Fe, New Mexico 87508
Jason
Job Details:
03/12/2024
installed led modules unit checks ok
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Albuquerque, New Mexico 87121
Larry
Job Details:
03/12/2024
Installed parts listed and tested good - Unit is good to go
We serviced a
MAYTAG DRYER
Model MGDB835DC4
Near Albuquerque, New Mexico 87121
Larry
Job Details:
03/12/2024
CX complaint - Dryer making squeeling noise - Inspected unit and found the idler failed - REplaced with TS and tested good - Unit is good to go - Servey Mentioned; used 1 W10837240 (Idler) from stock
We serviced a
MAYTAG TOP-LOAD WASHER
Model MVWX655DW0
Near Carbondale, Colorado 81623
James R
Job Details:
03/12/2024
Customer signed disclaimer. Agitator and transmission are shot splines are worn out. Customer will replace unit too costly to repair. Customer paid Service call $149.95 auth code 3VN333
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Colorado Springs, Colorado 80920
Glenn
Job Details:
03/12/2024
Installed New Motor & Main PCB. All OPS Test:OKMarked parts as defective.
We serviced a
MAYTAG DRYER ELECTRIC
Model MED3500FW1
Near Colorado Springs, Colorado 80920
Glenn
Job Details:
03/12/2024
"Unit makes squeeling noises once warmed up.Suggest replace the following: Idler Pulley Assy - W10837240 $68.50 , Belt - WPW10112954 $116.74 , Support Roller (s) - WPW10314173 $57.02 X4 = $228.08 , Tax $33.89 , MPS $14.50 , SC $129.95 , Labor $219.95 = $811.61 (Commercial building) Declined Estimate for now. Cell used for CC Charge: 719 464-4792 , Paid SC fee of $129.95 + Tip $19.49 = $149.44 , Autho# A4R44W"
We serviced a
SAMSUNG DISHWASHER
Model DW80CG4021SRAA
Near Colorado Springs, Colorado 80922
Mathew
Job Details:
03/12/2024
"Found control issue. Replaced pcb, test op all okay. Not hass compatible."
We serviced a
GE REFRIGERATOR/TOP
Model PYE22KYNFS
Near New Castle, Colorado 81647
Erik
Job Details:
03/12/2024
"CX turned down service . they sasy they have handled all issues. CX not on site , no data plate intel available . no signature available"
We serviced a
JENNAIR TRASH COMPACTOR
Model TC607X4
Near Woodland Park, Colorado 80863
David
Job Details:
03/12/2024
Delivered and installed trash compactor. Tested again and is working good.
We serviced a
SAMSUNG MICROWAVE
Model MC17T8000CG/AA
Near Colorado Springs, Colorado 80927
Brandon
Job Details:
03/12/2024
"Sticker on transformer was peeling off and the fan was hitting it, removed sticker and tested op all checks ok hass oqc passed"
We serviced a
SAMSUNG RANGE
Model NX60A6311SS/AA
Near Colorado Springs, Colorado 80908
Mathew
Job Details:
03/12/2024
"Replaced electrode, spark module and ignition switch. Test op, unit working as expected. Cx is builder, not home to sign ticket."
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017HZ09
Near Colorado Springs, Colorado 80922
Jerimiah
Job Details:
03/12/2024
"Installed replacement components, unit check ok."
We serviced a
KITCHENAID WALLOVEN
Model KOCE500ESS11
Near Colorado Springs, Colorado 80908
Jerimiah
Job Details:
03/12/2024
"Unit saying again F1E5 inverter issue, mag and inverter were previously replaced in December 23. Mylar shield now damaged, SSBed stock, unit check ok $418.26 CC Auth# 4TKRAFW10915651 mylar shield $81.66W11346197 magnetron under warrantyW11325604 inverter under warranty"
We serviced a
BOSCH DISHWASHER
Model SHPM78W54N/11
Near Colorado Springs, Colorado 80908
Jessie
Job Details:
03/12/2024
Replaced sound damper. Assembled unit. Checked for leaks. All ok
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ0
Near Colorado Springs, Colorado 80920
Glenn
Job Details:
03/12/2024
"Install New Main PCB, Diag Test > Pass , All OPS Test:OK"
We serviced a
SAMSUNG WASHER
Model WA50R5200AW/US
Near Colorado Springs, Colorado 80927
Brandon
Job Details:
03/12/2024
"Tested all unit operations, all checks ok, informed cx the unit is programmed to add both hot and cold on all cycles it can't be changed, Svf paid $129.95 Auth# F39TXV"
We serviced a
SAMSUNG COOKTOP
Model NA36N6555TS/AA
Near Colorado Springs, Colorado 80908
Mathew
Job Details:
03/12/2024
"Adjusted burners to operate as expected. Test op, all okay. Replaced reg."
We serviced a
WHIRLPOOL DRYER
Model WED8500DC4
Near Colorado Springs, Colorado 80921
Glenn
Job Details:
03/12/2024
"Install New Control, All OPS Test:OK"
We serviced a
KITCHENAID MICRO DRAWER
Model KMBD104GSS01
Near Colorado Springs, Colorado 80908
Jerimiah
Job Details:
03/12/2024
"Installed replacement console, tested unit, drawer pops back open intermittently and unexpectedly. Happens every other cook cycle if not more. Called techline was given SR#7738582101, unit frame damaged, deemed unrepairable. Gave info to cust to give info to cust for warranty replacement. Closing call"
We serviced a
WHIRLPOOL DRYER
Model WED5010LW
Near Albuquerque, New Mexico 87120
Joe
Job Details:
03/12/2024
cx complaint - drum not turning - replaced motor and pulley ordered last visit - tested unit - unit good to go
We serviced a
SAMSUNG REFRIGERATOR
Model RZ11M7074SA/AA
Near Colorado Springs, Colorado 80923
Brandon
Job Details:
03/12/2024
"7005981983, replaced parts and unit did same thing 82 error code, called tech support tech gave me 7000#"
We serviced a
SAMSUNG DRYER
Model DVE50M7450W/A3
Near Colorado Springs, Colorado 80923
Brandon
Job Details:
03/12/2024
"Steamer spray nozzle was loose, tightened nozzle and tested op all checks ok, Svf paid"
We serviced a
SAMSUNG DRYER
Model DVE50M7450W/A3
Near Monument, Colorado 80132
Mathew
Job Details:
03/12/2024
"Found burned out drive motor. Teplace fan motor assy, test op."
We serviced a
MAYTAG WASHER
Model MHW5630HW3
Near Divide, Colorado 80814
David
Job Details:
03/12/2024
"Checked washer, put into diagnostics, no codes, spinning up smooth without clothes. Cx says the machine walks 7 out of 10 times. Called tech line RS# 773866395He believes it is a loading issue and possibly the pedestal. Suggested trying without the pedestal. I asked if it could be the control, he said since there are no codes, he said no. He also checked to see if there are any software issues, none known of.Cx not happy that issue is not resolved. Suggested calling customer relations."
We serviced a
WHIRLPOOL WASHER
Model WTW6157PB0
Near Albuquerque, New Mexico 87121
Larry
Job Details:
03/12/2024
CX complaint - Lid not locking - Inspected unit and found the latch failed - Replaced with pre-id part and tested good - Unit is good to go - Servey mantioned
We serviced a
WHIRLPOOL WASHER
Model WFW560CHW4
Near Monument, Colorado 80132
Glenn
Job Details:
03/12/2024
Install New Dispenser cover. All OPS Test:OK
We serviced a
AMANA DRYER
Model NED4655EW
Near Colorado Springs, Colorado 80925
Carlos
Job Details:
03/12/2024
"Ran test, found broken wire in heating element, repair runs all ok, recommend cx have vents cleaned"
We serviced a
MAYTAG WASHER
Model MVW4505MW0
Near Colorado Springs, Colorado 80904
Carlos
Job Details:
03/12/2024
"Installed door latch, ran test all ok"
We serviced a
MIDEA REFRIGERATOR
Model MRF29D6AST
Near Colorado Springs, Colorado 80906
Ralph
Job Details:
03/12/2024
"dont believe the lower ice mkr was cycled and filled, i did and unit cycled and filled, cust to monitor the unit"
We serviced a
KITCHENAID RANGE
Model KFDD500ESS11
Near Colorado Springs, Colorado 80907
Roman
Job Details:
03/12/2024
"Plugged the unit in and the range will not turn on, checked the wall outlet and it is getting 240 veils, checked the terminal and the black wire is getting 25 V white and red are getting 240V. Cx mentioned the plugged was only set up for a 3 prong plug. Recommend calling an electrician to see whats going on with the plug."
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Rio Rancho, New Mexico 87144
Joe
Job Details:
03/12/2024
cx complaint - off balance alert - cleared debris from pump - tested unit - unit good to go
We serviced a
MAYTAG WASHER
Model MVW7232HW0
Near Colorado Springs, Colorado 80919
Glenn
Job Details:
03/12/2024
Install New Slider kit. All OPS Test:OK
We serviced a
WHIRLPOOL DRYER
Model WED4950HW
Near Colorado Springs, Colorado 80908
Kris
Job Details:
03/12/2024
installed all parts sent all ok at this time.
We serviced a
JENN-AIR DISHWASHER
Model JDPSS244LL1
Near Colorado Springs, Colorado 80908
Kris
Job Details:
03/12/2024
ran test op unit is working to spec at this time. suggest cleaning unit regularly.
We serviced a
JENN-AIR RANGE
Model JDS1750FS0
Near Colorado Springs, Colorado 80909
Ralph
Job Details:
03/12/2024
replced listed part and unti checked okaay
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF577KPS02
Near Colorado Springs, Colorado 80919
Ralph
Job Details:
03/12/2024
replaced listed parts and unit checked okay
We serviced a
WOLF STEAMER
Model CSO30PM/S/PH
Near Colorado Springs, Colorado 80908
Kris
Job Details:
03/12/2024
installed all boards ran test op all ok at this time.
We serviced a
SHARP MICROWAVE
Model SMD2470ASYE
Near Colorado Springs, Colorado 80920
Kris
Job Details:
03/12/2024
unit is working to spec drawer makes a noise from left side of unit nothing out of the ordinary. all ok at this time.
We serviced a
WHIRLPOOL DRYER
Model WED5100HW3
Near Colorado Springs, Colorado 80922
Jessie
Job Details:
03/12/2024
"Replaved maint kit, motor and blower. All ok"
We serviced a
WHIRLPOOL WALLOVEN
Model WOC54EC0HS20
Near Rio Rancho, New Mexico 87144
Joe
Job Details:
03/12/2024
"cx complaint - f1e6 error - inspected unit - installed inverter, sensor, and magnetron - tested unit - unit good to go - advised about survey - extra yr warranty by builder"
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC704FPS06
Near Colorado Springs, Colorado 80907
Carlos
Job Details:
03/12/2024
Installed ice maker ran test all ok
We serviced a
GENERAL ELECTRIC REFRIGERATOR/TOP
Model GFE28GYNJFS
Near Colorado Springs, Colorado 80916
Roman
Job Details:
03/12/2024
"Installed new flap, motor and spring. Tested the dispenser and its working better. Made sure fridge is working properly. Fridge working great."
We serviced a
GENERAL ELECTRIC STACK UNIT
Model GUD27ESSM1WW
Near Pueblo, Colorado 81001
Domingo
Job Details:
03/12/2024
Water was leaking from the house right the hose and run a diagnostic and it pass
We serviced a
MIDEA WASHER
Near Pueblo, Colorado 81006
James
Job Details:
03/12/2024
"found unit with 120vac to drain pump with no response. needs drain. pump WH11X34742 182.90+tax, sc 149.95, labor 159.95, mps 14.50. total; 525.54/365.59. cust declined repair collected 149.95 $149.95 CC Auth# NWAF9Y"
We serviced a
HOTPOINT WASHER
Model HTW240ASK6WS
Near Pueblo, Colorado 81001
Domingo
Job Details:
03/11/2024
Replace water valve inlet and test it okay
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF535SWHZ10
Near Grand Junction, Colorado 81505
James R
Job Details:
03/11/2024
Signed disclaimer. Replaced evap fan motor and blade. Started unit sounds good. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ0
Near Grand Junction, Colorado 81507
James R
Job Details:
03/11/2024
F7E1 not heating.Put into service diagnostics. Checked heat cycle. Pwr is put to heater 125 vac good but no amp draw heater is faulty. Will need to replace it and thermostat. W10518394 and WP661566 estimate to repair. $466.24 customer paid $149.95 service call. Auth code 44PM3Y will owe if repairs #316.79
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ08
Near Grand Junction, Colorado 81503
James R
Job Details:
03/11/2024
Customer signed disclaimers. No water coming into icemaker. Replaced water valve. Icemaker wont cycle. Unplugged unit. Replaced icemaker and test cycled operating as should. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
JENNAIR RANGE
Model JDSP536HL01
Near Wolcott, Colorado 81655
Antonio
Job Details:
03/11/2024
Installed new sensor and acu unit tested good
We serviced a
PROFILE REFRIGERATOR/TOP
Model PWE23KYNGFS
Near Eagle, Colorado 81631
Erik
Job Details:
03/11/2024
remove compressor and install replacement compressor - add R600 charge *see quick picstest: GOODJOB COMPLETECX not available for signature
We serviced a
GE REFRIGERATOR
Model GYE22GYNJFS
Near Eagle, Colorado 81631
Erik
Job Details:
03/11/2024
install board/test: GOODJOB COMPLETE
We serviced a
SUB ZERO REFRIGERATOR
Model CL4850SID/S/P
Near Monument, Colorado 80132
Kris
Job Details:
03/11/2024
installed door ran test op all ok at this time.
We serviced a
WHIRLPOOL WASHER
Model WTW5105HW3
Near Pueblo West, Colorado 81007
James
Job Details:
03/11/2024
"found belt slipping on pylly during heavy loads replaced preordered cam and belt, tested ops all ckok."
We serviced a
MAYTAG DRYER
Model MED5030MW0
Near Grand Junction, Colorado 81504
James R
Job Details:
03/11/2024
"Customer signeed disclaimer, Replaced control and temp encoder switch. Started unit is operating as should. Please fill out whirlpool tech satisfaction survey. Thank You."
We serviced a
WHIRLPOOL DISHWASHER
Model WDF518SAHM
Near Vail, Colorado 81657
Antonio
Job Details:
03/11/2024
Installed gasket drain hosevand float unit tested good
We serviced a
WHIRLPOOL DRYER
Model WED5010LW1
Near Fountain, Colorado 80817
Carlos
Job Details:
03/11/2024
"Blow thermal fuse, replaced heating element and fuse, runs all ok, recommend cx have vents cleaned to avoid issue from repeating."
We serviced a
SAMSUNG REFRIGERATOR
Model RF28HMEDBSR/AA
Near Colorado Springs, Colorado 80922
Brandon
Job Details:
03/11/2024
Replaced parts and tested op all checks ok
We serviced a
PROFILE DRYER
Model PTD70EBPT0DG
Near Avon, Colorado 81620
Erik
Job Details:
03/11/2024
CX not available for signatureinstall/test: GOODJOB COMPLETE
We serviced a
MAYTAG DRYER
Model MEDB765FW0
Near Albuquerque, New Mexico 87107
Larry
Job Details:
03/11/2024
Installed parts isted and tested good - Unit is good to go
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS331SDHM06
Near Rio Rancho, New Mexico 87124
Larry
Job Details:
03/11/2024
Installed parts listed and getting goof heat exchange - Unit should be good to go
We serviced a
WHIRLPOOL WASHER
Model WTW8127LC2
Near Albuquerque, New Mexico 87121
Larry
Job Details:
03/11/2024
Installed parts listed and tested gppd - Unit is good to go
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKZ0
Near Monument, Colorado 80132
Glenn
Job Details:
03/11/2024
"Install New Console, Swap UI Control from old console to new console. All OPS Test:OK, Also tightend door handle."
We serviced a
WHIRLPOOL RANGE
Model WFC150M0JW3
Near Santa Fe, New Mexico 87507
Joe
Job Details:
03/11/2024
cx complaint - left front burner not working - inspected unit - replaced element - tested unit - - unit good to go
We serviced a
SAMSUNG REFRIGERATOR
Model RF28HMEDBSR/AA
Near Peyton, Colorado 80831
Brandon
Job Details:
03/11/2024
"Replaced Ice maker parts and cycled ice maker, all checks ok"
We serviced a
SAMSUNG M/W OTR
Model ME16A4021AS/AA
Near Colorado Springs, Colorado 80925
Mathew
Job Details:
03/11/2024
Replaced door and adjusted case. Test op all okay.
We serviced a
SAMSUNG ELECTRIC OVEN
Model NE63T8711SS/AA
Near Colorado Springs, Colorado 80919
Brandon
Job Details:
03/11/2024
"Bad lock motor after self clean, replaced parts and tested op all checks ok hass oqc could not be preformed"