We serviced a
JENN-AIR WALLOVEN
Model JJW2430DS02
Near Rio Rancho, New Mexico 87124
Joe
Job Details:
06/10/2024
"Cx complaint. F2E1 error. Inspected unit, found ui bad. Replaced ui. Tested unit. Unit good to go"
We serviced a
JENN-AIR ICE MACHINE
Model JUIFX15HX01
Near Colorado Springs, Colorado 80906
Carlos
Job Details:
06/10/2024
Installed drain pump. Runs ok.
We serviced a
KITCHENAID REFRIGERATOR
Model KRSC703HPS01
Near Colorado Springs, Colorado 80921
Scott
Job Details:
06/10/2024
help roman install parts
We serviced a
MAYTAG DISHWASHER
Model MDB7959SHK0
Near Grand Junction, Colorado 81504
James R
Job Details:
06/10/2024
error code f5e1 and f7e1 and f6e1after diagnostic we found that theacu boardv had a bad connection on the power out to the mian circulation p
We serviced a
GE DRYER
Model GTD42EASJ2WW
Near Grand Junction, Colorado 81503
James R
Job Details:
06/10/2024
installed new belt tested unit dryer working properly at this timepleasew fill tech satisfaction surveythanmk you
We serviced a
FISHERPAYKEL DISHWASHER
Model n/a
Near Monument, Colorado 80132
Roman
Job Details:
06/10/2024
Removed the bottom panel and the pump is not in the correct place. Put it back together and tested the unit. Unit making a screeching noise from the pump. Took it apart and found a piece of plastic stuck inside. Removed it and the dw started draining. Dw fills and sprays. Dw is about 20+ years old and doesnt have a model number so it will b very hard to find parts for it in the future. Paid sc $149.95 CC Auth# 3FW3C4
We serviced a
DACOR COOKTOP
Model DTT36T960GM/DA
Near Colorado Springs, Colorado 80919
Mathew
Job Details:
06/10/2024
Adjusted burners to allow lower flame. Unit working as expected.
We serviced a
THERMADOR DISHWASHER
Model DWHD760CPR/23
Near Vail, Colorado 81657
Erik
Job Details:
06/10/2024
unit is unrepairable - contact BSH TAG:case# 4104343536inner 00770025 and outer 00779118 door panels damaged and hinge system damagedsend quick pics to:customer-support@bshg.comCX needs POP sent to BSH
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW2
Near Colorado Springs, Colorado 80924
Aaron
Job Details:
06/10/2024
"F7E5 shifter faultF2E1 keypadF7E1 motor error codes upon arrival, tested unit, found capacitor is shorted out, removed and replaced, tested unit through diagnostics, working well now. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRQA59CNKZ
Near Peyton, Colorado 80831
Aaron
Job Details:
06/10/2024
"Removed and replaced module assembly, working well now, verified by customer. Advised customer of 5 star survey."
We serviced a
SAMSUNG REFRIGERATOR
Model RF28T5001SR/AA
Near Colorado Springs, Colorado 80909
Brandon
Job Details:
06/10/2024
"No errors, tray on ice maker is broken so it won't release the ice, replaced ice maker and cycled all checks ok"
We serviced a
MAYTAG DRYER
Model MED7230HW1
Near Colorado Springs, Colorado 80909
Carlos
Job Details:
06/10/2024
"Installed motor & blower runs ok, cx need to replace hose, it is broken"
We serviced a
GE DRYER
Model GTD42EASJ2WW
Near Colorado Springs, Colorado 80909
David
Job Details:
06/10/2024
"Checked dryer, found a piece of metal in in the front slide causing the squeaking noise, removed and is normal sounds now."
We serviced a
WHIRLPOOL DRYER
Model WED8127LC1
Near Colorado Springs, Colorado 80908
Aaron
Job Details:
06/10/2024
"Dryer blower wheel is stripped on motor shaft, ineffectivly pushing air, unit is still heating well at time of inspection. Needs motor and blower wheel.Motor assembly w11549461 $255.76Blower wheel wp697772 $82.24Total parts $338.00Tax $27.72Supplies $14.50Hc $149.95Labor $229.95Total job $760.1230 day estimate No return on parts Auth 149.95 hc #3UECLC"
We serviced a
SAMSUNG DRYER
Model DV328AEW/XAA
Near Colorado Springs, Colorado 80919
Brandon
Job Details:
06/10/2024
"Bad heating element, replaced heating element and tested op all checks ok"
We serviced a
SAMSUNG WASHER
Model WA54R7600
Near Colorado Springs, Colorado 80921
Brandon
Job Details:
06/08/2024
DC97-16350V
We serviced a
SUB ZERO REFRIGERATOR
Model 532
Near Colorado Springs, Colorado 80919
Ralph
Job Details:
06/08/2024
"REPLACED C0MPRESSOR, STERLING APPROVED PARTNCOST...AUTHO NO. LLK4EH"
We serviced a
SAMSUNG WASHER TOP LOAD
Model n/a
Near Colorado Springs, Colorado 80920
Brandon
Job Details:
06/08/2024
Cx cancelled they got a new unit
We serviced a
SAMSUNG DISHWASHER
Model DW80B7070US/AA
Near Elbert, Colorado 80106
Brandon
Job Details:
06/08/2024
"Cx concerned about door not being parallel to the ground when opened, adjusted springs so door is parallel to the ground and showed cx, cx approved the result of the adjustment, tested op all checks ok hass oqc passed"
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5201SR
Near Colorado Springs, Colorado 80922
Brandon
Job Details:
06/07/2024
"Removed all ice from ice room and sealed completely, replaced ice maker and tray, tested op all checks ok"
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMW4
Near Colorado Springs, Colorado 80915
Carlos
Job Details:
06/07/2024
Installed dispenser all ok
We serviced a
WHIRLPOOL WASHER
Model WTW4850HW3
Near Colorado Springs, Colorado 80922
Aaron
Job Details:
06/07/2024
"Actuator is not fully engaging, causing cam to rub, removed and replaced actuator, tested unit through diagnostics, working well now. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT318FZDB09
Near Rocky Ford, Colorado 81067
James
Job Details:
06/07/2024
Found door seal not seating correctly replaced with pre-ordered part. Tested ops all ckok
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Colorado Springs, Colorado 80915
Carlos
Job Details:
06/07/2024
"Installed harness & Capacitor ran test, ran ok cx will observe"
We serviced a
WHIRLPOOL WASHER
Model WET4027HW2
Near Pueblo, Colorado 81005
Domingo
Job Details:
06/07/2024
Replace motor and capacitor and button with water valve test it and it pass and it wash and spin and drain everything pass if customer complaints about noises when spinning please order gear case W11454741. Right now machine is working correctly
We serviced a
KITCHENAID DISHWASHER
Model KDFE204KPS3
Near Monument, Colorado 80132
Glenn
Job Details:
06/07/2024
"Install New Dispenser & Vent, Customer will put blue rinse aid product sample recvd w/ unit for further testing. Once they have tried running it w/o rinse aid product. Ran Diag Cycle Test > All OPS Test:OK"
We serviced a
WHIRLPOOL WASHER
Model WFW560CHW4
Near Colorado Springs, Colorado 80908
Aaron
Job Details:
06/07/2024
"Inlet hose not secure, corrected and tested unit, working well now, installed litmus strip and advised customer of survey."
We serviced a
WHIRLPOOL WASHER
Model WFW560CHW4
Near Colorado Springs, Colorado 80921
Aaron
Job Details:
06/07/2024
"Debris binding pump, cleared and tested unit, working and draining well now. Stacked unit. Advised customer of 5 star survey."
We serviced a
MAYTAG DRYER
Model MED6630HC2
Near Albuquerque, New Mexico 87108
Jason
Job Details:
06/07/2024
Installed parts listed unit Checks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHZ04
Near Colorado Springs, Colorado 80917
Glenn
Job Details:
06/07/2024
Took almost 30 minutes to get ahold of Paul to get inside apt's. Dent in RS FF Door. Install New Door. Installed: Nameplate 2-1/2' down / 2- 3/4' from RS.Swap door handle & shelves from old door to new door. Note - Floor appears to be un-level and makes doors appear to be un-level. Suggest customer adjust RF leg to accomodate floor issue and straighten doors to alignmnet. No One available to sign.
We serviced a
KITCHENAID DISHWASHER
Model KDTE204KPS1
Near Glade Park, Colorado 81523
James R
Job Details:
06/07/2024
circ pump not running repaced circ pump assembly check for error codesno error codes during terst mode placed leak board under unit and took picturehad client sign disclaimer please fill out whirl
We serviced a
WHIRLPOOL DRYER
Model WED5010LW1
Near Pueblo, Colorado 81008
Domingo
Job Details:
06/07/2024
Dryer was not receiving power from breaker reset breaker and test dryer make sure the heat element wasnt the cause of tripping the breaker and the dryer work correctly at this time dryer is good to go
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Albuquerque, New Mexico 87123
Jason
Job Details:
06/07/2024
INSTALLED PARTS UNIT CHECKS OK
We serviced a
MAYTAG WASHER
Model MHW5630HW3
Near Albuquerque, New Mexico 87120
Larry
Job Details:
06/07/2024
Installed Drain pump and tested good - Unit is good to go
We serviced a
KITCHENAID WALLOVEN
Model KOCE500ESS22
Near Rio Rancho, New Mexico 87144
Joe
Job Details:
06/07/2024
Cx complaint. F1E5 error. Inspected unit. Replaced magnetron and inverter board. Tested unit. Unit good to go
We serviced a
WHIRLPOOL DISHWASHER
Model WDF760SADB0
Near Parachute, Colorado 81635
James R
Job Details:
06/07/2024
.Replaced dispenser test run unit outer door off. Ran quite awhile and did not leak. looked and tested all possible leak points could not find a leakunit running to manufacturer specs at this time thank you for your paitience
We serviced a
MAYTAG WASHER
Model MHW5630HW3
Near Albuquerque, New Mexico 87123
Jason
Job Details:
06/07/2024
checked unit found broken wire going to door lock repaired wire unit checks okAuth code:4M49KK$159.44
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF535SWHZ04
Near Albuquerque, New Mexico 87121
Larry
Job Details:
06/07/2024
Installed filter plate and tested good - Unit is good to go
We serviced a
WOLF MICROWAVE
Model MWC24
Near Colorado Springs, Colorado 80903
Jerimiah
Job Details:
06/07/2024
"Unit dead, found noise filter fuse open, replaced. Unit check ok labor was $199.95 chk#1083 $404.00 CK Auth# PYE939; used 1 Noise fuse (Noise filter fuse) from stock"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX986SIHZ03
Near Colorado Springs, Colorado 80924
Aaron
Job Details:
06/07/2024
"Inspected unit, found main control is not sending power to the inverter, compressor is not coming on . Needs controlSR7739255984. Approved onsite. Removed and replaced control, working well now, needs time to cool. Control w10843055 $307.79Tax $25.24Supplies $14.50Hc $129.95Labor $199.95Total job $677.43Approved onsite No return on parts Auth total job $677.43 #FJH93H"
We serviced a
SAMSUNG WASHER
Model WF45K6500AV/A2
Near Colorado Springs, Colorado 80911
Brandon
Job Details:
06/07/2024
"Error 4c, intermittent error, cleaned valve screens and checked temp sensor, all checks ok smart installed mode passed l, do t recommend any parts at this time, Svf $129.95, $219.90 Auth# K494P3"
We serviced a
SAMSUNG DRYER
Model DV45K6500EV/A3
Near Colorado Springs, Colorado 80911
Brandon
Job Details:
06/07/2024
"Rollers are worn out and idler pulley, drum oblonged, removed lint from blower, cleaned sensors,Svf paid $89.95, $219.90 Auth# K494P3Dc97-16782A $240.52, Dc93-00634a $97.56, Labor $209.95, Svf $89.95, Mps $14.50, Tax $27.72"
We serviced a
SAMSUNG REFRIGERATOR
Model RF30BB620012AA
Near Monument, Colorado 80132
Mathew
Job Details:
06/07/2024
"Found water pitcher over filling, water in overflow assy. Replaced faulty water pitcher housing. Test op."
We serviced a
SAMSUNG REFRIGERATOR
Model RF260BEAESG/AA
Near Colorado Springs, Colorado 80924
Brandon
Job Details:
06/07/2024
"Errors 22c, 25c, evap cover ice buildup, drain clogged, removed all ice, cleared drain and installed new evap cover and defrost sensor, tested op all checks ok"
We serviced a
SAMSUNG REFRIGERATOR
Model RF28JBEDBSG/AA
Near Colorado Springs, Colorado 80921
Mathew
Job Details:
06/07/2024
"Found ice room frozen, defrosted and installed ice maker service kit. Replaced cracked ice bin. Sealed room, test op."
We serviced a
SAMSUNG WASHER
Model WF45R6100AC/US
Near Colorado Springs, Colorado 80922
Brandon
Job Details:
06/07/2024
Replaced diaphragm a d tested op all checks ok hass oqc passed
We serviced a
SAMSUNG AIR DRESSER
Model DF60A8500CG/A1
Near Monument, Colorado 80132
Mathew
Job Details:
06/07/2024
"Verified hc3 error. Found steam assy getting 120v, no operation from assy. ReplCed faulty steam assy, test op."
We serviced a
SAMSUNG REFRIGERATOR
Model RF23J9011SR/AA
Near Colorado Springs, Colorado 80924
Mathew
Job Details:
06/07/2024
"Found icemaker iced up, bin cracked. Defrosted and sealed room, replaced icemaker, installed drain line, replaced clips and control. Test op all okay."
We serviced a
SAMSUNG REFRIGERATOR
Model RF23J9011SR/AA
Near Colorado Springs, Colorado 80909
Brandon
Job Details:
06/07/2024
"No errors, ice build up in ice room and leaking from tray, verified all parts are working, called Samsung tech support to see what to do, checked ice route water test passed, was advised to seal ice completely, sealed ice room inside and out, tested on all checks ok"
We serviced a
ELECTROLUX DRYER
Model EIGD50LIW1
Near Colorado Springs, Colorado 80904
David
Job Details:
06/07/2024
"Checked dryer, found lint screen clogged, could not see through it. Cleaned and has very good air flow now, temperatures are cycling as they should."
We serviced a
MAYTAG DRYER
Model MDET336AYW
Near Colorado Springs, Colorado 80919
Eric
Job Details:
06/07/2024
Replaced failed and tested. Unit working properly.
We serviced a
SAMSUNG DRYER
Model DV42H5000EW/A3
Near Colorado Springs, Colorado 80922
Eric
Job Details:
06/07/2024
"Customer stated dry runs whenever you close the door. Inspected unit and found control board has failed, even with the user interface off relay is still causing dryer to run. Recommend replacing main PCB. Part $324.88 DC92-00669WTax$26.64Supplies$14.50HC $129.95Labor $199.95Total$695.9230 day estimate No return on partsPaid HC $129.95Balance $565.97$129.95 CC Auth# 44H9A9"
We serviced a
GENERAL ELECTRIC OTR MICROWAVE
Model JVM6175SK3SS
Near Fountain, Colorado 80817
Jerimiah
Job Details:
06/07/2024
"Replaced broken door, but unit is still not heating, mtn high will need to be contacted to see if they will take care of this billing or just will be responsible for the door replacement. Labor to install mag will be $189.95 if chosen to do so. WB27X11079 magnetron $257.26"
We serviced a
SAMSUNG WASHER
Model WV60M9900AV/A5I
Near Colorado Springs, Colorado 80920
Eric
Job Details:
06/07/2024
Customer complaint that accessory washer not filling. Tested accessory washer drain pump did start unit did not fill nor proceed on with washing process. Check with tech-support verified that water valves are working properly. because water valves are working properly tech-support recommends replacing main PCB. Part $155.26 PCB DC92-02007ATax$12.73Supplies $14.50HC $129.95Labor$199.95Total$512.3930 day estimate No return on partsPaid HC 129.95Balance$382.44$129.95 CC Auth# MMJP9A
We serviced a
KITCHENAID REFRIGERATOR
Model KSSP48QMS00
Near Colorado Springs, Colorado 80904
Carlos
Job Details:
06/07/2024
7739252872 called tech line reinforced chute seal with permagum per WPL TL.
We serviced a
SUB ZERO REFRIGERATOR
Model 542
Near Colorado Springs, Colorado 80906
Ralph
Job Details:
06/07/2024
"unit was leaking out of the leftside of the drip tray inside the fridge section, manipulated the evap to get it to drip furtner away from the edge,also put some mastic at the corners of the tray...autho no. FV9H9N"
We serviced a
WHIRLPOOL REFRIGERATOR
Model GC5SHGXLS01
Near Colorado Springs, Colorado 80918
Glenn
Job Details:
06/07/2024
"Install New Bracket, All OPS Test:OK, Dispenser working again. Paid Remaining labor balance of $199.95 , Autho# 44P9HN"
We serviced a
SAMSUNG DRYER
Model DV48H7400EW/A2
Near Colorado Springs, Colorado 80919
Eric
Job Details:
06/07/2024
Customer stated that dryer will not start. Upon inspection found tensioner pulley broke causing arm to turn on motor kill switch. Need to replace tensioner pulley. Part $97.56 tensioner DC93-00634ATax$8.00Supplies14.50HC $129.95Labor$199.95Total$449.96Paid full$449.96 CC Auth# 93T9M9
We serviced a
WHIRLPOOL DISHWASHER
Model KDFE204KPS1
Near Grand Junction, Colorado 81507
James R
Job Details:
06/07/2024
arrived and found unit without powerran extension cord to test diagnostic and found error codes f7e2 circulation motor f8e4 drain pan not installed properly wich set off overflow switch f10e2 vent wax motor tested and cleared codes unit working fine atb this timehad client sign disclameralso please fill out tech safitacation surveythank you
We serviced a
SUBZERO ICE MACHINE
Model UC-15I
Near Colorado Springs, Colorado 80906
Roman
Job Details:
06/07/2024
"Installed water valve and checked for leaks, no leaks out of the valve. Tested the unit and made sure pumps kicked on and put the drain hose down inside the crawl space plumbing. Waited for unit to make ice. Ice maker is working great. Paid labor $459.95 CC Auth# UE9KJ9"
We serviced a
JENNAIR COOKTOP
Model JED8130ADB
Near Colorado Springs, Colorado 80906
Roman
Job Details:
06/07/2024
"Burner is burnt out, cx couldnt get it out. Pulled it out for them. Cx was going to replace themselves. Paid sc check #7059"
We serviced a
KITCHENAID DISHWASHER
Model KUDS30FXSS4
Near Albuquerque, New Mexico 87111
Jason
Job Details:
06/07/2024
checked unit found control has burnedSC$151.85MPS$17.50LABOR$162.69CONTROL#WPW10380685$282.41TX$24.00TOTAL$638.45Auth code:WE3P34$151.85
We serviced a
HOTPOINT DRYER
Model HTX24GASK1WS
Near Silverthorne, Colorado 80498
Erik
Job Details:
06/07/2024
install/ test: GOODJOB COMPLETE
We serviced a
GE DISHWASHER
Model GDP670SYV0FS
Near Silverthorne, Colorado 80498
Erik
Job Details:
06/07/2024
install/test: FAIL call GE tag: run through DC load check and check continuity of the harnesses - ALL NOMINAL!?GE TAG has rendered the unit unrepairablecase#13136862 CX not available for signature/ please allow 3-5 bus days for customer relations to process
We serviced a
GE REFRIGERATOR/TOP
Model GNE27JYMFS
Near Dillon, Colorado 80435
Erik
Job Details:
06/07/2024
install doorJOB COMPLETECX not available for signature
We serviced a
MONOGRAM RANGE
Model ZDP486NDT1SS
Near Breckenridge, Colorado 80424
Erik
Job Details:
06/07/2024
super low pressure on ignition - check shut off valve - low gas inlet pressure GC is aware - no action needed as inlet gas supply needs to be addressed firstCX not available for signature
We serviced a
GENERAL ELECTRIC WASHER
Model GTW500ASN5WS
Near Peyton, Colorado 80831
David
Job Details:
06/07/2024
"Checked washer from top to bottom, ran a complete cycle of towels and sheets, no out of the ordinary sounds for this model. Made sure all screws are tight. Top did have a little sneak where it attaches to the base wrap, made an adjustment and is not squeaking."
We serviced a
MONOGRAM MICROWAVE OVEN
Model ZWL1126SR1SS
Near Colorado Springs, Colorado 80904
David
Job Details:
06/07/2024
Picked up part
We serviced a
SAMSUNG MICROWAVE
Model ME21M706BAG/AA
Near Colorado Springs, Colorado 80925
Jerimiah
Job Details:
06/07/2024
"Unit stopped heating, mag needs replacing, mag has separate 10 year warranty. Grabbed part from marcone, labor was $189.95. $334.40 CC Auth# MTNK99OM75P-21-ESGN mag"
We serviced a
DACOR REFRIGERATOR SID
Model DRR36980RAPI
Near Colorado Springs, Colorado 80924
Brandon
Job Details:
06/07/2024
"Error 23c, condenser fan was blocked by water line, moved and secured water line, fan is running now and temps are dropping all other checks ok"
We serviced a
KITCHENAID RANGE
Model KOCE500ESS
Near Pueblo West, Colorado 81007
Domingo
Job Details:
06/07/2024
File number 7739252364 it was shorting out at the junction box re install wire and everything work
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Colorado Springs, Colorado 80907
Carlos
Job Details:
06/07/2024
"Found debris, lodged into shield, removed runs ok"
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Monument, Colorado 80132
Glenn
Job Details:
06/06/2024
"Verified water supply hoses installed correctly, Pointed out water dripping from Water supply valvees into drain cubby. Suggest plumber replace packings. Reseat all connections to PCB, All OPS Test:OK"
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706EBS05
Near Monument, Colorado 80132
Eric
Job Details:
06/06/2024
"Replaced part, customer will monitor if drip comes back."
We serviced a
MAYTAG REFRIGERATOR
Model MSS25N4MKZ09
Near Fountain, Colorado 80817
Carlos
Job Details:
06/06/2024
"Installed compressor, charged runs ok, cx will observe"
We serviced a
MAYTAG WASHER
Model MVW7232HW2
Near Colorado Springs, Colorado 80924
Aaron
Job Details:
06/06/2024
"Slider is not engaging, removed and replaced, tested unit, placed drain hose to proper depth, educated customer on usage and advised of survey. Working well now."
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ2
Near Colorado Springs, Colorado 80917
Glenn
Job Details:
06/06/2024
"Install New Sump & Motor Assy, All OPS Test:OK, No Leaks, Installed Leak Detector Strip for safety."
We serviced a
WHIRLPOOL WASHER
Model WTW4655JW2
Near Colorado Springs, Colorado 80918
Glenn
Job Details:
06/06/2024
"R&R New Tub overhaul, including Outer Case and braces, Suspension, Harness, Tub Seal. All OPS Test:OK, No Leaks."
We serviced a
MAYTAG WASHER
Model MVWP586GW0
Near Monument, Colorado 80132
Glenn
Job Details:
06/06/2024
"Silk Sweat pants caught under agitator. (This is the Remove agitator to release stuck garment. (Hidden bolt on lower wash plate, not listed in parts breakdown. Techline: insisted there wasn't any hidden bolt!) No Error Codes, Instpected underside of washplate, no defectes. Diag Test:OK , Suggest customer use a garment bag for item of delicate materials, as they will get caught under wash plate. All OPS Test:OKSR#7739249676"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ
Near Colorado Springs, Colorado 80925
Ralph
Job Details:
06/06/2024
INSTALLED PART AND UNIT CHECKED OKAY
We serviced a
WHIRLPOOL WASHER
Model WFW5605MW1
Near Basalt, Colorado 81621
James R
Job Details:
06/06/2024
Replaced valve .test operation working as should.
We serviced a
MAYTAG DRYER
Model MED5100DW0
Near Colorado Springs, Colorado 80920
Glenn
Job Details:
06/06/2024
"Install New Control, All OPS Test:OK"
We serviced a
WHIRLPOOL WASHER
Model MVWX655DW1
Near Colorado Springs, Colorado 80915
David
Job Details:
06/06/2024
"Checked washer, basket drive hub stripped out. Had to cut wash plate to replace drive hub. Replaced basket drive hub and wash plate. Ran calibration and diagnostic cycles. All ran as expected."
We serviced a
KITCHENAID DISHWASHER
Model KDFE204KPS1
Near Santa Fe, New Mexico 87508
Joe
Job Details:
06/06/2024
"Cx complaint. Unit not starting. Replaced fill valve ordered last visit, full of sand. Tested unit. Unit good to go. Leak strip still in place"
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ2
Near Albuquerque, New Mexico 87121
Larry
Job Details:
06/06/2024
Installed parts listed and tested good - Unit is good to go
We serviced a
MAYTAG WASHER
Model MVW5430MW0
Near Albuquerque, New Mexico 87105
Larry
Job Details:
06/06/2024
Installed valve and tested good - Unit is good to go
We serviced a
JENN-AIR WALLOVEN
Model JJW2830IL01
Near Albuquerque, New Mexico 87120
Larry
Job Details:
06/06/2024
CX complaint - Controls caught fire - Inspected unit and found the control board caught fire - Called techline to document (SR7739248003)
We serviced a
MAYTAG WASHER
Model MHW6630HW3
Near Albuquerque, New Mexico 87120
Larry
Job Details:
06/06/2024
Installed control and tested good - Unit is good to go
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near Santa Fe, New Mexico 87506
Joe
Job Details:
06/06/2024
Cx complaint. Unit leaking and not completing cycle. Replaced tub ring and control. Tested unit. Unit good to go
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Albuquerque, New Mexico 87111
Jason
Job Details:
06/06/2024
re-calibrated unit for wash performance. unit opperation checks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT311FZDW02
Near Los Ranchos de Albuquerque, New Mexico 87107
Larry
Job Details:
06/06/2024
Installed fan and tested good - Unit is good to go
We serviced a
MAYTAG WASHER
Model MHW5630HW0
Near Glenwood Springs, Colorado 81601
James R
Job Details:
06/06/2024
moved and un stacked unit vacuumed out drain line and debrisinstalled new stater and control boardtested diagnostic #12unit now running properly put a leal board underneeth unit and took a pickplease fill whirlpool tech satisfaction surveythank you
We serviced a
WHIRLPOOL DRYER
Model WED9750WW1
Near Albuquerque, New Mexico 87104
Larry
Job Details:
06/06/2024
Installed element and tested good - Unit is good to go
We serviced a
WHIRLPOOL DISHWASHER
Model WDTA50SAKZ0
Near Colorado Springs, Colorado 80918
Eric
Job Details:
06/06/2024
"Dishwasher showing error code E4F8. Checked under unit found overflow tray had some water in it, causing overflow. Switch to actuate dried up tray and ran unit. No leaks under unit at this time. Inspected and noticed a lot of debris. Educated customer on cleaning of door seal and recommend replacement if error occurs. Tub gasket W11483553Collected HC $129.95$129.95 CK Auth# 3P3KPU"
We serviced a
FISHERPAYKEL RANGE INDUCTION
Model OR30SDI6X1
Near Colorado Springs, Colorado 80920
Jerimiah
Job Details:
06/06/2024
"Unit getting F103, called techline. Was told general software fault needs parts below if power cycle fails. Labor is being quoted as $269.95. Cycled power unit is functioning now. Problem 2 is that Cust has to justify food baking to bottom of cavity since foods are burned elsewhere. Issue could lie as smaller element that doesnt get as hot as 36 models. Cust will watch for further issues, unit Check ok currently. Charging service call $172.44 CC Auth# JLAC3C578257 temp switch $250.14578058 function switch $209.74578057 mode encoder kit $209.56"
We serviced a
SUB ZERO FREEZER
Model DEC1850FIL
Near Colorado Springs, Colorado 80906
Ralph
Job Details:
06/06/2024
"a screw needed to be screwed in all the way, tookcare of the issue, unit checked okay"
We serviced a
SUB ZERO REFRIGERATOR
Model DEC2450R/L
Near Colorado Springs, Colorado 80906
Ralph
Job Details:
06/06/2024
"UNIT WAS MAKING SOME VIBRATION NOIISE, MANIPULAGTED SOME OF THE COPPER ANDE NOISE SUBSIDED"
We serviced a
KITCHENAID REFRIGERATOR
Model KSSO48QMB01
Near Carbondale, Colorado 81623
James R
Job Details:
06/06/2024
Customer signed disclaimer. Unit is cooling some. Removed cover over compressor area. There is a previouly installed bpv 31 valve. Condenser is not plugged and fan is running. Put gauges on system pressure is in a vacumn. Recharged. Checked for leaks where ever we could. Could find none. Would need a complete rebuild. Made customer aware that this charge may last abit or a few month can not tell for sure. Suggest customer replace unit. Customer paid. $693.95 auth code. 39Y9HTPlease fill out whirlpool tech satisfaction survey.
We serviced a
SAMSUNG REFRIGERATOR
Model RF18HFENBSG
Near Colorado Springs, Colorado 80904
Mathew
Job Details:
06/06/2024
"Replaced washer lid, could not test op as unit is on display in Home Depot."
We serviced a
SAMSUNG REFRIGERATOR
Model RF18HFENBSG
Near Colorado Springs, Colorado 80904
Mathew
Job Details:
06/06/2024
"Replaced washer lid, could not test op as unit is on display in Home Depot."