We serviced a
SAMSUNG REFRIGERATOR
Model RF22R7351SR/AA
Near Colorado Springs, Colorado 80918
Brandon
Job Details:
03/22/2024
Replaced parts and tested op all checks ok hass oqc passed
We serviced a
MAYTAG DRYER ELECTRIC
Model MEDC465HW0
Near Colorado Springs, Colorado 80918
Glenn
Job Details:
03/22/2024
"Install New Shaft, Support Rollers, Idler pulley assy. & Belt. All OPS Test:OK"
We serviced a
BOSCH DISHWASHER
Model SHPM78Z55N/01
Near Colorado Springs, Colorado 80911
Ralph
Job Details:
03/22/2024
installed liisyed parts and unit checked okay
We serviced a
HOTPOINT REFRIGERATOR
Model HPS10LGVRW
Near Pueblo, Colorado 81004
Domingo
Job Details:
03/22/2024
Customer says compressor was loud check compressor everything test it within spec check the refrigerator temp and it was 40? so I lower to 37? and the freezer was at 5? I lower it to 0 I have customer monitor noise
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF757SDHZ04
Near Colorado Springs, Colorado 80921
Kris
Job Details:
03/22/2024
ran test op unit has ice clumping normal whirlpool suggest emptying every 2 weeks.
We serviced a
WHIRLPOOL DRYER
Model WED8200YW2
Near Colorado Springs, Colorado 80916
Glenn
Job Details:
03/22/2024
"making a wicked noise , Locked up Idler Pulley, Torn Seal, Worn Belts. , idler pulley assy - WPW10547292 $64.03 , Belt (Drive) - WP8547157 $78.30 , Belt (Blower) - WP8544742 $82.14 , Seal Kit (Drum) - 280140 $100.88 , Tax $26.68 , MPS $14.50 , SC $129.95 , Labor $209.95 , Total Estimate $706.43 , Declined Estimate, wants to buy new dryer. Paid SC Fee of $129.95 , Autho# 994Y4U"
We serviced a
WHIRLPOOL REFRIGERATOR
Model GB2FHDXWS07
Near Pueblo, Colorado 81006
Domingo
Job Details:
03/22/2024
When arrive the ice maker was making ice but not enough check tube was clog I unclog it and test it okay S/c is waived is a called back
We serviced a
KITCHENAID WALL OVEN
Model KODE500ESS04
Near Falcon, Colorado 80831
Aaron
Job Details:
03/22/2024
"Customer states both ovens were on , they opened the door after preheat, and the unit popped and will not reset. Loose connection in junction box arched and damaged wiring, unable to test power to the unit or controls, recommend electrician to correct/ensure proper power to the unit. Auth 129.95 #KLP493"
We serviced a
SUB ZERO REFRIGERATOR
Model 700TC12
Near Colorado Springs, Colorado 80904
Ralph
Job Details:
03/22/2024
reinstalled drawer autho no 33Y9J9
We serviced a
MAYTAG FREEZER
Model MZF34X16DW04
Near Colorado Springs, Colorado 80918
Glenn
Job Details:
03/22/2024
"Not Cooling properly, Current product temp at 28F - 30FSR# 7738741325Sealed System Leak, Suggest Estimate would be between $800-$1200 Avg, Declined further estimate, will purchase new Freezer. Paid SC Fee $149.95 , Autho# K393J9"
We serviced a
JENNAIR MICROWAVE
Model JMW2427WS02
Near Colorado Springs, Colorado 80919
Glenn
Job Details:
03/22/2024
"Blown fuse again.. Techline: (Same SR#)Possible Door Switches causing unit to blow fuse. however; may also be bad Appliance Manager, Power Supply PCB.. Or unknown short causing issue. , Fuse - WP4375321 $62.33 , Interlock Switch Assy - 461968971522 $166.22 , Switch - W10211972 $75.46 ???Light Transformer - W11238401 $247.20 , Bulb - W10886919 $69.41 , Tax $ , MPS $14.50 , Labor $209.95 , Declined Estimate, Unit is 10 years old, and they prefer to buy new unit."
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW
Near Leadville, Colorado 80461
Antonio
Job Details:
03/22/2024
Installed stiker and lid lock unit tested good
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ03
Near Grand Junction, Colorado 81507
James R
Job Details:
03/22/2024
customer installed part.
We serviced a
WOLF RANGE
Model DF486G
Near Colorado Springs, Colorado 80908
Jerimiah
Job Details:
03/22/2024
"Installed replacement control board. Unit check OK, charged labor as quoted $208.95 CC Auth# L34P34"
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5201WW
Near Colorado Springs, Colorado 80919
Brandon
Job Details:
03/22/2024
"Error 21, freezer fan motor not working, getting voltage but not working, need freezer EVAP assy, Svf paid $129.95 Auth# UM4R4P, Da97-21002a $265.58, Labor $199.95, Svf $129.95, Mps $14.50, Tax $21.78"
We serviced a
WHIRLPOOL WASHER
Model WTW8500DC2
Near Rifle, Colorado 81650
James R
Job Details:
03/22/2024
Replaced slider.W10734521 Paid part auth code 3334FX
We serviced a
MAYTAG WASHER
Model MVW7232HW1
Near Peyton, Colorado 80831
Aaron
Job Details:
03/21/2024
"F6E3 ACUF7E4 motor error codes upon arrival, gearcase is noisy in spin, slider tabs are broken, still engaging tub at this time. Needs gearcase, slider, and washplate. Gearcase w11449841 $351.60Slider assembly w10734521 $76.02Washplate w10902814 $139.44Total parts $567.06Tax $46.50Supplies $14.50Hc $149.95Labor $229.95Total job $1,007.9630 day estimate No return on parts Auth 149.95 hc #P4E4LW"
We serviced a
MAYTAG WASHER
Model MVW5430MW1
Near Belen, New Mexico 87002
Larry
Job Details:
03/21/2024
CX complaint - Washer fills and drains continuously - Inspected unit and found the valve failed - REplaced with TS and tested good - Unit is good to go; used 1 W11513255 (Valve) from stock
We serviced a
MONOGRAM DISHWASHER
Model ZDT985SPNBSS
Near Fraser, Colorado 80442
Erik
Job Details:
03/21/2024
install door and test: GOODJOB COMPLETECX not available for signature
We serviced a
MONOGRAM REFRIGERATOR
Model ZWE23NSTBSS
Near Tabernash, Colorado 80478
Erik
Job Details:
03/21/2024
door hitting base of inner FZ cavity: adjust drawer height leveler * see quick picsTEST: DOOR CLOSURE SMOOTHJOB COMPLETECX not available for signature
We serviced a
WHIRLPOOL WASHER
Model WFW6620HC3
Near Fraser, Colorado 80442
Antonio
Job Details:
03/21/2024
Installed new ui panel unit tested good
We serviced a
WHIRLPOOL WASHER
Model WFW6620HW3
Near Fraser, Colorado 80442
Antonio
Job Details:
03/21/2024
Installed ned drain pump unitvtested good
We serviced a
WHIRLPOOL WASHER
Model CAE2745FQ1
Near Colorado Springs, Colorado 80906
Roman
Job Details:
03/21/2024
"Called tech support and since the lights arent working the control board is bad. Removed a wire a wire harnes between the 2 boards And the washer is running for free, there is another board the coin operator needs to be replaced.Main cpu #W11368855 $298.36Coin slide interface board #WPW10491734 $83.72Tax $31.33Parts total $413.41MPs $14.50Labor $229.95Sc $89.95Total cost $747.31Paid sc $219.90 CC Auth# V3H394"
We serviced a
SAMSUNG REFRIGERATOR
Model RF32CG5900SRAA
Near Colorado Springs, Colorado 80927
Brandon
Job Details:
03/21/2024
"Replaced compressor and dryer, vacuumed and charged unit to spec, all checks ok hass oqc passed"
We serviced a
SAMSUNG REFRIGERATOR
Model RF28JBEDBSR/AA
Near Colorado Springs, Colorado 80924
Brandon
Job Details:
03/21/2024
Replaced parts and tested op all checks ok hass oqc passed
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706EBS01
Near Granby, Colorado 80446
Antonio
Job Details:
03/21/2024
Installed new modules and led board unit tested good
We serviced a
SAMSUNG RANGE
Model NE63A6111SS/AA
Near Pueblo, Colorado 81007
Mathew
Job Details:
03/21/2024
"Cx states oven smoked excessively on initial two preheat cycles. Cycled oven to 325, brought temp up to 375, 450. Called techline high risk to document. No smoke found. Unit was grounded wrong, tech support recommended fixing grounding. Re test unit to 450. All good no smoke. Tech support agent decided smoke was from initial burn off of elements."
We serviced a
SAMSUNG RANGE
Model NX60A6511S
Near Peyton, Colorado 80831
Kris
Job Details:
03/21/2024
installed ignitor and safety valve ran test op all ok at this time cx will monitor unit.
We serviced a
FRIGIDAIRE REFRIGERATOR
Model FFTR1835VB3
Near Cripple Creek, Colorado 80813
Ralph
Job Details:
03/21/2024
installed parts and unit checked okay
We serviced a
BOSCH REFRIGERATOR
Model BCL80ENS/06
Near Peyton, Colorado 80831
Kris
Job Details:
03/21/2024
ran test op units ice maker is stuck. in position. cx does not want to go through with repair.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT311FZDW02
Near Larkspur, Colorado 80118
Jessie
Job Details:
03/21/2024
Replaced evap and filter drier. Ran vacuum and charged unit r600. All.ok
We serviced a
PROFILE DRYER
Model PTD70EBPT0DG
Near Grand Lake, Colorado 80447
Erik
Job Details:
03/21/2024
install belt and idler/test: GOODJOB COMPLETE
We serviced a
WHIRLPOOL RANGE
Model WEG745H0LZ1
Near Colorado Springs, Colorado 80908
Jerimiah
Job Details:
03/21/2024
"Installed replacement controller, unit check ok."
We serviced a
GE FREEZER
Model ZIK303NPPBII
Near Larkspur, Colorado 80118
Jessie
Job Details:
03/21/2024
Replaced icemaker per techline. Test op unit fills all.pk
We serviced a
SAMSUNG REFRIGERATOR
Model RF28JBEDBSG/AA
Near Pueblo West, Colorado 81007
Mathew
Job Details:
03/21/2024
"Defrosted ice room, installed ice room parts and sealed room. Replaced control. Cycled icemaker, all okay."
We serviced a
WOLF RANGE
Model SRT366-LP
Near Woodland Park, Colorado 80863
Ralph
Job Details:
03/21/2024
"units gas line was not tightened enough, tightened the connector and unit checked okay, cust to monitor"
We serviced a
SAMSUNG REFRIGERATOR
Model RF18HFENBSR/US
Near Pueblo, Colorado 81007
Mathew
Job Details:
03/21/2024
"Sealed system issue. Unit has a bad frost pattern. Will need compressor, evap, dye drier, process stub and r-600a refrigerant. Cx could not find POP to prove start date on warranty for SSW. Collect svf 129.95. $129.95 CC Auth# 9X4HHT"
We serviced a
WHIRLPOOL RANGE
Model WFE515S0JS3
Near Basalt, Colorado 81621
James R
Job Details:
03/21/2024
customer signed disclaimer. Perform SP W11490386 Cut pwr to unit disconnect grd wire reapply pwr and test bake and broil get elements red hot. Checked top burners as well. Cut pwr again and reattach grd wire then test bake and broil again. Operating as should. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
MAYTAG WASHER
Model MVW6230HW3
Near Rifle, Colorado 81650
James R
Job Details:
03/21/2024
Customer signed disclaimer. Replaced housing. test run in service diagnostics. Ok. Put into a regular max fill deep water wash. With control panel removed.watched for leaks as unit filled. cold and hot. Could see none. Tilted unit back could find none underneath. Checked pressure tube from tub to control is in good shape.Installed correctly. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
SAMSUNG DISHWASHER
Model DW80R9950US/AA
Near Monument, Colorado 80132
Brandon
Job Details:
03/21/2024
"Drain pump clogged, removed soda pop tab, tested op all checks ok, installed leak strip, Svf paid $129.95 Auth# FE9WN9"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ08
Near Albuquerque, New Mexico 87120
Larry
Job Details:
03/21/2024
CX complaint - Not making enough ice - Inspected unit and IM would not go into test cycle - Replaced valve and IM with pre-id parts and tested good - Unit is good to go
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Albuquerque, New Mexico 87120
Larry
Job Details:
03/21/2024
CX canceled - She thought we were coming to look at her tankless water heater
We serviced a
JENNAIR MICROWAVE
Model JMC8130DDS
Near Albuquerque, New Mexico 87122
Jason
Job Details:
03/21/2024
checked unit found burned wire repaired wire unit checks okAuth code:93C33N$335.80
We serviced a
KITCHENAID COOKTOP
Model 654654
Near Elbert, Colorado 80106
Kris
Job Details:
03/21/2024
ran test op found left burner potentiometer causing power light to short out.
We serviced a
BOSCH DISHWASHER
Model SHX3AR76UC/28
Near Peyton, Colorado 80831
Kris
Job Details:
03/21/2024
installed handle all ok at this time. found 2 plastic pieces inside door. could not verify part position from diagram. also i have never seen these parts on any bsh dishwasher
We serviced a
WHIRLPOOL DRYER
Model CEM2745FQ
Near Colorado Springs, Colorado 80906
Roman
Job Details:
03/21/2024
Dryer needs a new element and timer adjusted. I adjusted the timer and let the maintenance guy to run the dryer and see if it will stop like it should. Heating element #W10864898 $236.56Tax $19.40Total parts $255.96MPs $14.50Labor $189.95Sc $129.95Total cost $590.36Paid sc $219.90 CC Auth# V3H394
We serviced a
MAYTAG DRYER
Model MED7230HC3
Near Los Alamos, New Mexico 87544
Joe
Job Details:
03/21/2024
cx complaint - clothing wet at end of cycle - inspected dryer - found cut off failed - replaced cugt off fuse - tested unit - unit good to go; used 1 280148 (cut off) from stock
We serviced a
VIKING RANGE
Model VGIC3054BSS
Near Woodland Park, Colorado 80863
Ralph
Job Details:
03/21/2024
cust is going to order part and call back once its in to be installed....autho no. VKM39M
We serviced a
JENNAIR REFRIGERATOR
Model JFFCC72EFS00
Near Colorado Springs, Colorado 80927
Jessie
Job Details:
03/21/2024
Unit ui no operation. Reset the unit and all operations came back. Forced test the icemaker. No errors and did fill. Customer to monitor may need a bd
We serviced a
MAYTAG DRYER
Model MED7230HW3
Near Albuquerque, New Mexico 87105
Larry
Job Details:
03/21/2024
CX complaint - Not heating - Inspected unit and found the element and TCOs check good - Checked power at the wall and am getting a good 122vac L1-Gnd but only 36vac L2-Gnd - Advised cx to call a certified electrician - servey mentioned
We serviced a
GE DISHWASHER
Model GDT635HMJ2ES
Near Colorado Springs, Colorado 80905
Roman
Job Details:
03/21/2024
Did not diagnose
We serviced a
SAMSUNG REFRIGERATOR
Model RF28R7351SR/AA
Near Pueblo, Colorado 81003
Mathew
Job Details:
03/21/2024
"Replaced all icemaker parts. Replaced pcb. Ran test cycle on icemaker, test op all okay."
We serviced a
JENN-AIR WALLOVEN
Model JMW2427WS02
Near Colorado Springs, Colorado 80919
Glenn
Job Details:
03/21/2024
"F6E8 - Lost Com w/ MW , Resetting power no longer resolves issue. , P1 Brn > P2 Blu 120VAC , P5 / P6 - 120VAC , SR #7738727369 , Brn / Brn 120vac , Red / Red 45 ohm , Brn >.6ohm , Bad Fuse - WP4375321 62.33 , Installed New Fuse, All OPS Test OK, ----------------------------- Light in MW not working. Bad Light Transformer - W11238401 $247.20 & Bulb - W10886919 $69.405. + Tax + MPS $14.50 , Labor $209.95 , Customer will decide on the additional repair within 30 days. Paid 461.84 , Autho# FPW3Y4"
We serviced a
KITCHENAID REFRIGERATOR
Model KBSD602ESS01
Near Albuquerque, New Mexico 87122
Jason
Job Details:
03/21/2024
installed led modules unit checks ok
We serviced a
MAYTAG WASHER
Model MHW8630HC4
Near Monument, Colorado 80132
Glenn
Job Details:
03/21/2024
"Unit has physical damage to top left corner of cabinet / Shell, and front panel. Would require stripping down entire machine to swap all parts from old cabinet to new cabinet. Helper required and 2 hours minimum. Would need to order outer shell, front panel & 4 shocks. Any further physical damage is unknown. Techline suggest customer call customer service, since already beyond 30 days. Or contact Seller. SR# 7738730061"
We serviced a
SPEEDQUEEN DRYER
Model 654654654
Near Peyton, Colorado 80831
Kris
Job Details:
03/21/2024
installed element ran test op all ok at this time cx will monitor unit.
We serviced a
WHIRLPOOL WASHER
Model WTW5000DW3
Near Colorado Springs, Colorado 80907
Roman
Job Details:
03/21/2024
"Installed new belt and cam, calibrated the washer, ran a test cycle and washer is working great."
We serviced a
GE DRYER
Model GTDP490ED2WS
Near Colorado Springs, Colorado 80907
Roman
Job Details:
03/21/2024
"Checked the dryer knob and it was broken, recommend replacing the knob with a different knob from the unit. Paid sc $129.95 CC Auth# EXN393"
We serviced a
SAMSUNG WASHER
Model WF45R6100AP/US
Near Colorado Springs, Colorado 80909
Roman
Job Details:
03/21/2024
"Ran the washer and no error codes came up, washer was taking a while for it to drain. Checked the drain pump filter and it was full of stuff. Recommend checking the filter every month and making sure theres nothing stuck inside. Labor $99.95Sc $129.95Total cost $229.90"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ18
Near Colorado Springs, Colorado 80925
Carlos
Job Details:
03/21/2024
Installed ice maker. Runs ok
We serviced a
MAYTAG WASHER
Model MVW7230HW1
Near Colorado Springs, Colorado 80921
Glenn
Job Details:
03/21/2024
"washer makes a terrible clicking noise at the end of the cycle , Found loose motor bolt was laying on floor under unit. Install Bolt, all OPS Test:OK"
We serviced a
KITCHENAID REFRIGERATOR
Model KSRS25IHBL02
Near Colorado Springs, Colorado 80921
Glenn
Job Details:
03/21/2024
"Shelf which drawer slides into is broken - 2206346 NLA , Paid SC Fee of $129.95 , Autho# J99HHY"
We serviced a
MAYTAG DRYER
Model MED6500MBK0
Near Colorado Springs, Colorado 80911
Carlos
Job Details:
03/21/2024
Called techline SR# 7738728138 .Dryer heats up ok 145 degrees to 119 on and off. Recommend cx have vent replaced with heavy metal hose.
We serviced a
AMANA DRYER
Model NED4655EW1
Near Colorado Springs, Colorado 80906
Carlos
Job Details:
03/21/2024
"Installed element, runs all ok"
We serviced a
KITCHENAID REFRIGERATOR
Model KRSC503EBS01
Near Colorado Springs, Colorado 80920
Glenn
Job Details:
03/21/2024
"Same issue as last repair 3 years ago. Ice buildup in FF Evap. Door Seals OK, Defrost Circuit > OK, Suggest Possible issue caused by door being left open. Customer will attempt a manual defrost over night w/ doors open & power off. Then will let us know if problem returns. Paid SC fee of $129.95, Autho# T4P9TN"
We serviced a
WHIRLPOOL WASHER
Model CAE2745FQ1
Near Colorado Springs, Colorado 80918
Glenn
Job Details:
03/21/2024
"Unit was stuck on drain cycle. Diag Test > Pass, Reseat Connections on MAin PCB, Turn water supply on to full open position. Ran Normal Cycle using Coin operated Mech. Unit Fill and Began Washing. Appears to be ok at this time. If problem returns, suggest order new Main PCB & Lower Harness w/ pressure hose. Since water water supply drips from shut-off valve when fully opened, turned it off, and let customer know they need to repair the valve seal. Also need to open this valve to full open position when running unit. (Same for Hot water supply, needs 2 be open all the way during machine operation.) Called Landlord to let her know."
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ0
Near Albuquerque, New Mexico 87109
Jason
Job Details:
03/21/2024
installed lh annd rh tracks unit checks ok
We serviced a
KITCHENAID DISHWASHER
Model KDTE104ESS4
Near Colorado Springs, Colorado 80920
Glenn
Job Details:
03/21/2024
"Bad Element & T-stat, Power Good at PCB.Element (Comes w/ Nuts) 119.56 , T-stat 77.82 , Retainer Clip (For Kickplate) 61.11 , Tax $21.20 , MPS $14.50 , SC $129.95 , Labor $199.95 , Declined Estimate for now. Paid SC Fee of $129.95 + Tip $20.00 = $149.44, Autho# 4WMK3E"
We serviced a
SAMSUNG REFRIGERATOR
Model RF323TEDBSR/AA
Near Colorado Springs, Colorado 80919
Brandon
Job Details:
03/21/2024
"Michael.kouhestani@comcast.net, Inefficient compressor and compressor fan, no frost pattern on evaporator, needs sealed system repair, need compressor, drier, stub, and compressor fan, Svf paid $129.95 Auth# F3FJCE, Da81-06007b $200.08, Da81-01184a $119.78, Da31-00146b $208.96, Mkv190cl2b/e01 $362.17, Labor $825.60, Svf $129.95, Mps $14.50, Tax $73.06"
We serviced a
WHIRLPOOL RANGE
Model WFG550S0LZ5
Near Kiowa, Colorado 80117
Aaron
Job Details:
03/21/2024
"Module is not sending power, replaced module, harness, and ignitor, tested both bake and broil, working well now, raised legs of unit to customer's preference, top burners are lighting well. Unit operating on propane. Customer believes orifice kit w11560165 was used for burners upon installation. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL RANGE
Model WFG550S0LZ4
Near Colorado Springs, Colorado 80918
Jessie
Job Details:
03/21/2024
Replaced spark module. Tested oven to 350. Tested broil. All ok
We serviced a
MAYTAG DRYER
Model MEDC465HW0
Near Colorado Springs, Colorado 80922
Aaron
Job Details:
03/21/2024
"Heating element and thermostat are shorted out, removed and replaced components, tested and heating well now. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ11
Near Colorado Springs, Colorado 80923
Aaron
Job Details:
03/21/2024
"Dent top right of RC door, removed and replaced door, no scratches or dents, verified by customer. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL M/W OTR
Model WMMF5930PZ00
Near Colorado Springs, Colorado 80923
Aaron
Job Details:
03/21/2024
"Dent center of vent grill cover, removed and replaced grill, no scratches or dents, verified by customer. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF757SDHZ03
Near Colorado Springs, Colorado 80927
Aaron
Job Details:
03/21/2024
"Removed and replaced ice maker and ice box fan assembly, tested unit with harvest and fill cycles, working well now, Needs time to cool. Advised customer of 5 star survey."
We serviced a
MAYTAG DRYER ELECTRIC
Model MED6630HW0
Near Peyton, Colorado 80831
Aaron
Job Details:
03/21/2024
"Heating element and thermostat are shorted out, removed and replaced components, tested unit, working and heating well now. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ05
Near Grand Junction, Colorado 81505
James R
Job Details:
03/21/2024
Replaced evap fan motor and cover gaskets. Ok.
We serviced a
GE REFRIGERATOR
Model GSS25IMNZHES
Near Pueblo West, Colorado 81007
James
Job Details:
03/20/2024
found door seal sticking out from door causing units door to not close properly. secured door seal and tested. all ops test good. left litmus
We serviced a
SAMSUNG DRYER
Model DV42H5000EW/A3
Near Colorado Springs, Colorado 80927
Kris
Job Details:
03/20/2024
ran test op unit has bad element dc97-14486a 282.50
We serviced a
SAMSUNG DRYER
Model DV331AER/XAA
Near Pueblo, Colorado 81008
James
Job Details:
03/20/2024
found disconnected wire interfering with dryer drum causing unit to not start. secured wire and tested all ops test good. pics in qp
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Socorro, New Mexico 87801
Larry
Job Details:
03/20/2024
"CX complait - Dryer not heating enough - Inspected unit and found High temp heating between 142 and 215 degrees, med temp between 120 and 193 degrees and low temp between 104 and 180 degrees - Unit is operating as designed - Servey mentioned"
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017HS09
Near Los Lunas, New Mexico 87031
Larry
Job Details:
03/20/2024
"Installed control, housing and lamp and tested good - Unit is good to go - Servey mantioned"
We serviced a
WHIRLPOOL WASHER
Model WTW8127LW1
Near Los Lunas, New Mexico 87031
Larry
Job Details:
03/20/2024
CX complaint - right before the final spin cycle- whirling noise loud noise - Inspected unit and found the retaining bolt that holds the rotor on cameout - Applied loc-tite and secured bolt - advised cx to wait 24 hours before using unit - Unit should be good to go
We serviced a
WHIRLPOOL WASHER
Model WTW6157PW0
Near Los Lunas, New Mexico 87031
Larry
Job Details:
03/20/2024
Installed washplate and agitator and tested good - Unit is good to go - Servey mentioned
We serviced a
KITCHENAID RANGE
Model KFGC506JMH05
Near Eagle, Colorado 81631
Antonio
Job Details:
03/20/2024
Adjusted valves to each burnner unit tested good
We serviced a
MAYTAG WASHER
Model MVW7230HW1
Near Rio Rancho, New Mexico 87124
Joe
Job Details:
03/20/2024
cx complaint - agitator cap keeps coming off - replaced cap ordered last visit - tested unit - unit good to go - advised about survey
We serviced a
SAMSUNG WASHER
Model WF45B6300AP/US
Near Colorado Springs, Colorado 80925
Mathew
Job Details:
03/20/2024
"Replaced spin basket, rear and front tub. Test op, all okay."
We serviced a
SAMSUNG REFRIGERATOR
Model RF28HMEDBSR/AA
Near Colorado Springs, Colorado 80923
Brandon
Job Details:
03/20/2024
Replaced parts and tested op all checks ok hass oqc passed
We serviced a
SUBZERO REFRIGERATOR
Model 590
Near Colorado Springs, Colorado 80907
Ralph
Job Details:
03/20/2024
"UNITN HAD A BROKEN WATER LINE, CUT AND RESEATED AND UNIT CHECKED OK, CUST PAID TOTAL BILL AUTHO NO, AF93XV"
We serviced a
WHIRLPOOL WASHER
Model MVW6200KW1
Near Monument, Colorado 80132
Glenn
Job Details:
03/20/2024
"washer turns on but does not spin, All OPS Test:OK, Ran Several Tests, including running load of towels. Motor & Capacitor also checks good. Customer will continue to monitor. Paid SC Fee of $129.95 , Autho# 9WHV9P"
We serviced a
GE REFRIGERATOR
Model GLE12HSPARSS
Near Glenwood Springs, Colorado 81601
Erik
Job Details:
03/20/2024
install/test: PASSjob complete
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT518SZFM02
Near Los Lunas, New Mexico 87031
Larry
Job Details:
03/20/2024
Installed control and tested good - unit is good to go
We serviced a
WHIRLPOOL RANGE
Model WFE505W0HW5
Near Colorado Springs, Colorado 80923
Jerimiah
Job Details:
03/20/2024
"Installed replacement parts, unit check ok"
We serviced a
SAMSUNG RANGE ELECTRIC
Model NE63A6311SG/AA
Near Colorado Springs, Colorado 80920
Jerimiah
Job Details:
03/20/2024
"Both front left and front right infinite switches not cycling and need replacing, Cust going to talk it over, labor would be $189.95 upon return service if chosen to do so. Charging service call $142.95 CC Auth# K3PRJWDG44-01006D front right/left $215.68"
We serviced a
FRIGIDAIRE WALLOVEN
Model FCWD2727AWD
Near Cañon City, Colorado 81212
Jessie
Job Details:
03/20/2024
Replaced listed parts. Preheated both ovens. All operations good. All ok
We serviced a
WHIRLPOOL RANGE
Model WFE515S0JS3
Near Carbondale, Colorado 81623
James R
Job Details:
03/20/2024
"Customer signed disclaimer. Perform SP W11490386Cut pwr then removed grd wire. Test in bake,broil 350 degrees burners red hot. Also did top burners as well. Then reattached grd wire and test again. Operating as it should. Please fill out whirlpool tech satisfaction survey. Thank You."
We serviced a
SAMSUNG DRYER
Model DVE45T3200W/A3
Near Colorado Springs, Colorado 80925
Mathew
Job Details:
03/20/2024
Unit shutting off prematurely on sensed cycle. Found bad control board. Replaced board and test op all okay.
We serviced a
SAMSUNG REFRIGERATOR
Model RF28HFEDBSG/AA
Near Colorado Springs, Colorado 80925
Mathew
Job Details:
03/20/2024
"Defrosted ice room, replaced all icemaker parts. Sealed room. Test op all okay."
We serviced a
SAMSUNG REFRIGERATOR
Model RF4287HARS/XAA
Near Colorado Springs, Colorado 80905
Mathew
Job Details:
03/20/2024
"Inspected fridge, cleared dust from condenser. Fridge is operating as expected. Svf 129.95 $129.95 CC Auth# U9H3N4"
We serviced a
SAMSUNG DRYER
Model DVE53BB8700VA3
Near Peyton, Colorado 80831
Brandon
Job Details:
03/20/2024
Replaced parts and tested op all checks ok hass oqc passed