We serviced a
SAMSUNG DISHWASHER
Model DW80R9950UG/AA
Near Colorado Springs, Colorado 80924
Mathew
Job Details:
01/22/2024
Found defective switch in assy motor holder. Replaced switch and control. Test op all okay. If issue persists unit will need sub wire harness (T) dd39-00013t and cover dd63-00151a
We serviced a
SAMSUNG GAS RANGE
Model NX60A6511SS/AA
Near Colorado Springs, Colorado 80924
Mathew
Job Details:
01/22/2024
Replaced faulty spark module. Test op all okay.
We serviced a
SAMSUNG REFRIGERATOR
Model RF28K9070SG/AA
Near Colorado Springs, Colorado 80908
Brandon
Job Details:
01/22/2024
"Replaced ice maker, tray, PCB and auger assy, all checks ok hass oqc passed, seal"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHW00
Near Elbert, Colorado 80106
Aaron
Job Details:
01/22/2024
"Unit's settings upon arrival 0f and 38f, as was set last time, tested product temperatures for both cavities, 1.4f for FC and 35.6-38.3f for RC, doors are sealing well, product is well placed on the shelves, discussed situation with techline once more, unit working as designed and no further recommendations. SR7738290070. Advised customer of 5 star survey."
We serviced a
KITCHENAID WALLOVEN
Model KOCE500ESS11
Near Colorado Springs, Colorado 80908
Aaron
Job Details:
01/22/2024
"F1E5 inverter error upon arrival, waveguide cover and cavity burnt, unspected waveguide and damaged waveguide, discussed with techline, deemed non repairable. SR7738291445Advised customer of 5 star survey."
We serviced a
BOSCH REFRIGERATOR
Model B36FD50SNS/01
Near Colorado Springs, Colorado 80921
Jessie
Job Details:
01/22/2024
Replaced icemaker components. Ran test. Cudtomer to monitor. All okk i
We serviced a
BOSCH DISHWASHER
Model SHP78CM5N/22
Near Colorado Springs, Colorado 80921
Jessie
Job Details:
01/22/2024
Leak coming from left hand corner front of dw. Unit is not hitting flood sensor. Noticed unit is not secured to cabinets and the door was hitting when I got here. Took apart door and found insulation fallen in door. Secured door components. All ok
We serviced a
SAMSUNG DISHWASHER
Model DW80CG4021SRAA
Near Pueblo, Colorado 81008
James
Job Details:
01/22/2024
found loose wire at ui causing intermittent touch loss. secured and tested ops ckok. advised cust on proper ops
We serviced a
BOSCH RANGE
Model HDIP056U/06
Near Pueblo West, Colorado 81007
James
Job Details:
01/22/2024
found loose wire at ui panel causing panel to be unresponsive secured wire and tested. advised cust on proper use of unit.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHV08
Near Colorado Springs, Colorado 80915
Carlos
Job Details:
01/22/2024
Installed water valve ran test all ok
We serviced a
SAMSUNG DISHWASHER
Model DW80R9950US/AA
Near Colorado Springs, Colorado 80908
Brandon
Job Details:
01/22/2024
"Replaced inner door and tested op all checks ok, checked for leaks all ok, dispenser opened with hass oqc passed"
We serviced a
AMANA WASHER
Model NTW4516FW4
Near Colorado Springs, Colorado 80923
Aaron
Job Details:
01/22/2024
"F7E6 motor error code upon arrival, tested unit through diagnostics, found 2 small holes in drainline, removed and replaced drain hose, draining well now. Advised customer of 5 star survey."
We serviced a
SAMSUNG WASHER
Model WF220ANWXAA 01
Near Colorado Springs, Colorado 80926
Roman
Job Details:
01/22/2024
"Ran the washer and it seemed to drain and spin, checked the filter and it was cleaned out. Ran diagnostics and washer seemed to run through it okay. Drain pine was far down the drain tube, raised it and ran washer again, washer draining out faster but still sounds like it backing up in the pipe. Recommend getting it cleaned out. Cx mentioned it happens every once and a while and that indicates a control board issue, took the board out and did notice a couple of areas that are starting to turn black, Part has been discontinued. Paid check #3246 $129.95 CK Auth# NL33H3"
We serviced a
MARVEL ICE MACHINE
Model MP15CPP3RP
Near Colorado Springs, Colorado 80921
Jessie
Job Details:
01/22/2024
Replaced broken grid.unit passed self test. Customer to.monitor ice prpduction.
We serviced a
GE RANGE
Model JTD5000EN3ES
Near Silt, Colorado 81652
Erik
Job Details:
01/22/2024
install/test: GOODJOB COMPLETE
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017HW09
Near Colorado Springs, Colorado 80925
Carlos
Job Details:
01/22/2024
"Ran test op unable to determine noise, fan, magnetron and turn table motor run ok (cx will observe, and make a recording if it happens again ). Cx education cx was getting door message because Cx was setting timer without opening door first."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ08
Near Colorado Springs, Colorado 80923
Aaron
Job Details:
01/22/2024
"Unit's temperatures upon arrival 16f and 56f, upon inspection found the control is not sending power to defrost assembly, element resistance is low, thermistor has open reading. Needs element, thermistor, and control. Control w11558182 $274.02Element w11650662 $139.76Thermistor wpw10384183 $99.56Total parts $513.34Tax $42.09Supplies $14.50Hc $149.95Labor $249.95Total job $969.8330 day estimate No return on parts Auth 149.95 ck #5123 #K4UM93"
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ1
Near Grand Junction, Colorado 81504
James R
Job Details:
01/22/2024
Signed disclaimer. Not circulating water replaced sump motor assy. Finish asy. Test in service diagnostics operation normal and no error codes when done. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF757SDHZ00
Near Peyton, Colorado 80831
Aaron
Job Details:
01/22/2024
"Removed and replaced ice box fan, ice maker, and module kit, tested through harvest and fill cycles, working well now. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHV00
Near Grand Junction, Colorado 81503
James R
Job Details:
01/22/2024
Replaced icemaker sealed cover with silver tape to be sure had no leaks. Reinstalled icemaker housing assy. Replaced electronic control. Started unit and put in diagnostics. Test 56 no errors 57 and 59 checked good cycled good. test 45 icemaker filled operating as should. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
WHIRLPOOL DRYER
Model WED5605MW0
Near Fountain, Colorado 80817
Carlos
Job Details:
01/22/2024
"Installed control board, and UI, ran test, all ok, cx will observe"
We serviced a
JENNAIR REFRIGERATOR
Model JFX2897DRM
Near Colorado Springs, Colorado 80924
Kris
Job Details:
01/22/2024
installed all parts sent ran test op all ok at this time.
We serviced a
SAMSUNG WASHER
Model WF45R6300AW/US
Near Colorado Springs, Colorado 80924
Kris
Job Details:
01/22/2024
cx deciding on repairsran test op fond latch not engaging will need listed parts before I can make a determiation if any other issues.door latch dc34-00028a 207.94
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS01
Near Colorado Springs, Colorado 80906
Ralph
Job Details:
01/22/2024
"cust concerned about the noise coming from the fridge, i explained that this unit has four fans and a compressor and yes there may be one on at all times and not to worry, dont know how the other pars were orderedsince i installed them on previous visit, may be my screw up"
We serviced a
MAYTAG RANGE
Model MER6600FZ2
Near Colorado Springs, Colorado 80919
Glenn
Job Details:
01/22/2024
"All OPS Test:OK , Unit has hidden Bake Element which is accessed via RS of Unit. Ohms good, Good Power to Bake Element. Broil also working. Techline: Called as it appeared Bake Element was missing, since cavity had place for where it should be.. SR# 7738297718 , Paid SC fee of $129.95 , Autho# VMA49U"
We serviced a
WHIRLPOOL DISHWASHER
Model WDTA50SAKZ1
Near Peyton, Colorado 80831
Aaron
Job Details:
01/22/2024
Unit uninstalled in living room with another unit installed. Removed and replaced motor sump assembly. Advised customer of 5 star survey.
We serviced a
SAMSUNG DRYER
Model DV45H7000EW/A2
Near Colorado Springs, Colorado 80920
Kris
Job Details:
01/22/2024
cx deciding on repairs.heater assy dc97-14486a 282.50rollers idler dc97-16782e all 4 164.34idler dc96-00882f 200.46
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017HZ09
Near Grand Junction, Colorado 81504
James R
Job Details:
01/22/2024
Customer signed disclaimer.Checked fuse was blown. Checked for a short none. Checked for proper Checked door switches all checked ok. checked wiring all looks good. Checked light and turntable all looks good. Checked amperage draw with unit heating 15.96 good. Ran unit for at least 10 minutes no issues. Replaced fuse. WPM0805101 Called tech line. 7738294755 Agrees with findings. Unit is working as should. Please fill out whirlpool tech satisfaction survey. Thank You.; used 1 WPM0805101 (20A Fuse) from stock
We serviced a
KITCHENAID WALLOVEN
Model KODE500ESS02
Near Colorado Springs, Colorado 80906
Carlos
Job Details:
01/22/2024
"Installed UI and control board. Ran test, runs ok UI registers inputs ok. Cx paid Labor $209.95 CC Auth# 4N39C9"
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Grand Junction, Colorado 81504
James R
Job Details:
01/22/2024
Signed disclaimer. Put into service diagnostics no error codes. Tilted unit back Removed cover from pulleys belt is loose slipping. Squeals replaced. W11239857 Calibrated unit. Did a quick service diagnostics came back with no errors. Ok. Unit is draining good. Lid lock is working. Unit is operating as should.; used 1 W11239857 (Belt (Washer)) from stock
We serviced a
KITCHENAID REFRIGERATOR
Model KBFN506ESS01
Near Colorado Springs, Colorado 80906
Roman
Job Details:
01/22/2024
Installed new board and all leds are lit in ff and freezer. Fridge fans and compressor kicked on and working. Paid labor $$169.95 CC Auth# LF9M3N
We serviced a
SAMSUNG MICROWAVE
Model ME19CB704112AA
Near Colorado Springs, Colorado 80923
Mathew
Job Details:
01/22/2024
"Replaced door. No longer binds up but microwave door is misaligned, called techline to troubleshoot."
We serviced a
MAYTAG DISHWASHER
Model MDB6000AWB
Near Colorado Springs, Colorado 80904
Carlos
Job Details:
01/22/2024
"Installed Door links, all ok cx paid labor $179.95 CK Auth# 494HL4"
We serviced a
MAYTAG WASHER
Model MVW7230HW0
Near Colorado Springs, Colorado 80903
Carlos
Job Details:
01/22/2024
"Installed UI, Control Board and Water valve. All codes are clear, hot water works, runs cycle ok."
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Colorado Springs, Colorado 80903
Roman
Job Details:
01/22/2024
Hot and cold water lines are not on the correct valves. Swapped them and ran diagnostics on the washer. Washer filling and running correctly. Washer working great.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT518SZFM02
Near Colorado Springs, Colorado 80903
Roman
Job Details:
01/22/2024
"Installed new back cover, sealant and air duct, ran fridge through diagnostics and it did not make the noise. Ran it in during the regular cycle and listened for a noise and it did not make noise other then the compressor and fans."
We serviced a
WHIRLPOOL WASHER TOP LOAD
Model WTW4816FW
Near Pueblo, Colorado 81003
James
Job Details:
01/22/2024
unit is being used in commercial setting. unit has been abused. no model or serial number present on unit. talked with AR and found out whirlpool has extremely limited warranty on commercial use residential appliances. advised cust that no repair could be done and walked away per AR
We serviced a
BOSCH FRENCH DOOR REFR
Model B36CD50SNS/02
Near Pueblo, Colorado 81006
James
Job Details:
01/22/2024
"installed ordered parts tested ops all ckok, no errors, ice fan is operating and ice fill works with no leaks."
We serviced a
WHIRLPOOL WASHER
Model WET4027HW1
Near Avon, Colorado 81620
Antonio
Job Details:
01/22/2024
Found cut wirers at capacitor spliceded back together unit tested good Sc$14995Lb$189.95$489.85 CC Auth# R93XA9
We serviced a
WHIRLPOOL DRYER
Model WHD560CHW2
Near Vail, Colorado 81657
Antonio
Job Details:
01/22/2024
Found air cartridge not properly installed removed lint installed cartridge right unit tested good
We serviced a
SAMSUNG DRYER ELECTRIC
Model dve45n5300w/a3I
Near Colorado Springs, Colorado 80922
Jessie
Job Details:
01/22/2024
Bad heater.Heater#dc97-14486a$282.50Tax $23.17Sc $129.95$14.50Labor $189.95Total $640.07No return on partsCustomer declines
We serviced a
WHIRLPOOL REFRIGERATOR
Model GD5SHAXLQ01
Near Colorado Springs, Colorado 80907
David
Job Details:
01/22/2024
"Checked refrigerator Refrigerator Working, cooling good.Good frost pattern, good air flow condenser, very plugged with lint, vacuumed and now has much better air flow Called customer and explained what I done. Somebody in the past had put a Supco hard start device on."
We serviced a
SAMSUNG DISHWASHER
Model DW80B7070US/AA
Near Monument, Colorado 80132
Mathew
Job Details:
01/22/2024
Replaced wire harness and test op all okay.
We serviced a
KITCHENAID REFRIGERATOR
Model KSSS42QDX04
Near Colorado Springs, Colorado 80904
David
Job Details:
01/22/2024
Found leak in water line to icemaker Repaired water line
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHV00
Near Rifle, Colorado 81650
James R
Job Details:
01/22/2024
Printed labels took pics ready to send.
We serviced a
SAMSUNG GAS RANGE
Model NX60A6511SS/AA
Near Colorado Springs, Colorado 80924
Mathew
Job Details:
01/22/2024
Replaced faulty spark module. Test op all okay.
We serviced a
BOSCH RANGE
Model HII8057U/05
Near Peyton, Colorado 80831
Jerimiah
Job Details:
01/19/2024
Installed all replacement parts. Unit check ok.
We serviced a
BOSCH WALL OVEN
Model HBL8453UC/05
Near Colorado Springs, Colorado 80919
Jerimiah
Job Details:
01/19/2024
Installed replacement relay board and thermal sensor. Adjusted +5 calibration. Unit check ok
We serviced a
WHIRLPOOL DISHWASHER
Model WDF331PAHS1
Near Belen, New Mexico 87002
Larry
Job Details:
01/19/2024
Installed Control and tested good - Unit is good to go
We serviced a
JENNAIR RANGE
Model JES9800CAB00
Near Colorado Springs, Colorado 80904
Roman
Job Details:
01/19/2024
Installed new control board and tested the broil and bake and both are working when they are supposed too. Convection working as well. Made sure all burners are working properly. Range working great. Paid check #5735 $199.95 CK Auth# A4LAKK
We serviced a
WHIRLPOOL REFRIGERATOR
Model KRFC704FPS05
Near Colorado Springs, Colorado 80921
Kris
Job Details:
01/19/2024
unit has bad ui will need listed parts before i can make a determination of any other issues.1 sc 129.952 msp 14.503 labor 209.954 parts w11574766 252.745 total 628.09
We serviced a
MAYTAG WASHER
Model MHW6630HC3
Near Gypsum, Colorado 81637
Antonio
Job Details:
01/19/2024
Found over sudsing cleared pressure sensor hose unit tested good
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF535SMBM00
Near Avon, Colorado 81620
Antonio
Job Details:
01/19/2024
Installed new door seal unit tested good
We serviced a
JENN-AIR RANGE
Model JGRP436HM05
Near Beaver Creek, Colorado 81620
Antonio
Job Details:
01/19/2024
Installed new knob and lock unitvtested good
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHZ08
Near Loma, Colorado 81524
James R
Job Details:
01/19/2024
"Signed disclaimer. Replaced diffuser,evaporator motor and Blade. Ok but complaint as well is that when push on side and interior of frig unit squeaks badly. Called tech line. Sent a video of situation. Has been submitted for a lead review. Will take up to three days for a update SR# 7738277780 Please fill out whirlpool tech satisfaction survey. Thank You."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT348FMDSE0
Near Avon, Colorado 81620
Antonio
Job Details:
01/19/2024
Found frezzer drain line frozen over thawed unit tested good Sc$149.95Labor189.95$339.90 CC Auth# 4EK39X
We serviced a
JENN-AIR DISHWASHER
Model JDPSS245LX0
Near Vail, Colorado 81657
Antonio
Job Details:
01/19/2024
Installed new door seal and inlet initvtested good also advised of water strips
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ
Near Colorado Springs, Colorado 80915
Carlos
Job Details:
01/19/2024
Installed water valve ran test all ok
We serviced a
WHIRLPOOL RANGE
Model WEG745H0LZ1
Near Colorado Springs, Colorado 80923
Aaron
Job Details:
01/19/2024
"Console bottom trim came off, uses three screw and inserts to hold plastic up, corrected and secure, if problem reoccurs, would need new plastic inserts. Insert W11025100 $47.67 x3 inserts = $143.01Tax $11.73Supplies $14.50Hc $149.95Labor $189.95Total job $509.1430 day estimate No return on parts Auth 149.95 #3MUP44"
We serviced a
MAYTAG FREEZER
Model MZF34X18FW06
Near Monument, Colorado 80132
Glenn
Job Details:
01/19/2024
"Unit is in garage which is not climate controlled. Temp in Garage is approx 38F at this time, perhaps way colder overnight. Frzr Product at: 17F > 19F , Reset connections to control. Techline: Suggest move unit inside to temps above 40F constantly. Otherwise, we cannot make proper diagnosis. Allow 4 days for unit to settle after it has been brought inside, before calling, if unit still having trouble, customer will then call back. SR# 7738278491"
We serviced a
KITCHENAID COOKTOP
Model KCGS356ESS05
Near Larkspur, Colorado 80118
Glenn
Job Details:
01/19/2024
"Attempted installing switch assy twice, as I've ordered 6 of these with hope I can get one installed w/o it breaking. Both broke. Called Techline once again, referred to SR #7738087274. Sent multiple pics and suggested I try forcing the center switch on from the side. I was then successful in getting center switch in place, however one of the other switches was defective, as did not stop clicking once ignited and turned past ignite! Tried others. 4th attempted part install finally worked. (Note - previous visits were failed attepts with anoth 2 bad parts!) All OPS Test:OK"
We serviced a
WHIRLPOOL WASHER
Model WFW560CHW4
Near Rocky Ford, Colorado 81067
James
Job Details:
01/19/2024
installed ordered parts tested ops all ckok. left litmus
We serviced a
SAMSUNG DRYER
Model DV42H5200EW/A3
Near Colorado Springs, Colorado 80915
Mathew
Job Details:
01/19/2024
Found roller clogged with hair. Cleaned all rollers and test op all okay. Svf 129.95 $129.95 CC Auth# XVM99R
We serviced a
WHIRLPOOL DISHWASHER
Model WDF520PADM7
Near Albuquerque, New Mexico 87105
Larry
Job Details:
01/19/2024
Installed parts listed and tested good - Unit is good to go
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF757SDHZ02
Near Albuquerque, New Mexico 87105
Jason
Job Details:
01/19/2024
Installed parts listed unit checks ok
We serviced a
MAYTAG WASHER
Model MHW5500FW1
Near Albuquerque, New Mexico 87106
Jason
Job Details:
01/19/2024
Installed control and pressure sensor unit checks ok
We serviced a
WHIRLPOOL WALLOVEN
Model WOD52ES4MB0
Near Albuquerque, New Mexico 87110
Jason
Job Details:
01/19/2024
installed console and fan motor unit checks ok
We serviced a
KITCHENAID WALLOVEN
Model KOCE500ESS20
Near Albuquerque, New Mexico 87120
Larry
Job Details:
01/19/2024
CX complaint - Oven making weird noise - Inspected unit and found the cx is concerned about the sound of the fan kicking into high speed at the end af a baking cycle - Explained this is normal operation - Unit is operating as designed
We serviced a
SAMSUNG DISHWASHER
Model DW80R2031US/AA
Near Fountain, Colorado 80817
Brandon
Job Details:
01/19/2024
"Replaced water valve and tested op checked for leaks all ok, installed leak detection strip all checks ok hass not compatible"
We serviced a
GE RANGE
Model JBS86SP1SS
Near Leadville, Colorado 80461
Erik
Job Details:
01/19/2024
GE TAG : 'replace cooktop and move forward with repair'please allow 24 hours (GE CX SERVICE TO APPLY CASE #)CX understands they maybe responsible for SC and/or LABOR costinstall cooktop $99.00service $189.95case#11758066
We serviced a
SAMSUNG WASHER
Model WF50BG8300AVUS
Near Colorado Springs, Colorado 80907
Brandon
Job Details:
01/19/2024
Replaced weights and tested op all checks ok hass oqc passed
We serviced a
GE REFRIGERATOR/TOP
Model GSS25GYPFCFS
Near Silverthorne, Colorado 80498
Erik
Job Details:
01/19/2024
refused service - already scheduled with Peak Appliance for Feb. 1stdidnt want me to service CANCEL SERVICE
We serviced a
KITCHENAID DISHWASHER
Model KDTM604KPS0
Near Colorado Springs, Colorado 80922
Aaron
Job Details:
01/19/2024
"Left door hinge is not properly engaging spring, corrected and tested unit. Advised customer of situation and survey."
We serviced a
SAMSUNG WASHER
Model WA52A5500AV/US
Near Colorado Springs, Colorado 80910
Mathew
Job Details:
01/19/2024
"Found valves filling machine on test run, wires have continuity, main pcb test ok. Checked pressure sensor hose, found it not plugged in all the way to sensor. Test operated as expected. $129.95 CC Auth# ALL49VIf issue persists unit will need DC96-01703N"
We serviced a
DACOR MICROWAVE OVEN
Model DCM24S
Near Colorado Springs, Colorado 80906
Mathew
Job Details:
01/19/2024
"Installed new outer panel of door. Reinstalled and test op, door still not aligned. Called dacor support. Sent agent pictures of issue, agent told me he will submit for review."
We serviced a
SAMSUNG MICROWAVE
Model ME17R7021EB/AA
Near Colorado Springs, Colorado 80906
Mathew
Job Details:
01/19/2024
Cx did not want me to perform any repairs on product. Got model/serial but Cx made it clear she only wanted a refund of faulty microwave. Microwave making buzzing noise indicative of bad transformer/ magnatron.
We serviced a
MAYTAG WASHER
Model MHW5630HC2
Near Colorado Springs, Colorado 80922
Aaron
Job Details:
01/19/2024
"Debris clogging inlet valve, cleared and tested unit, working well now. Advised customer that water supply to unit is on an outside wall as well, potentially freezing the lines in extreme cold. Advised customer of 5 star survey."
We serviced a
JENNAIR REFRIGERATOR
Model JFX2897DRP02
Near Grand Junction, Colorado 81507
James R
Job Details:
01/19/2024
Replaced all lights some of the lights on F.F. area were glued in was quite a ordeal to remove. All are working. Customer paid $149.95 Labor auth code VPP3JY Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
SAMSUNG DISHWASHER
Model DW80R2031UG/AA
Near Fountain, Colorado 80817
Mathew
Job Details:
01/19/2024
Found bad seal on drain pump causing leak and LC code. Replaced drain pump and test op all okay.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS331SDHM06
Near Colorado Springs, Colorado 80922
Aaron
Job Details:
01/19/2024
"Dents on both doors, removed and replaced doors, no scratches or dents, verified by customer. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHV08
Near Albuquerque, New Mexico 87123
Jason
Job Details:
01/19/2024
installed door unit checks ok
We serviced a
WHIRLPOOL RANGE
Model WFE320M0JS3
Near Colorado Springs, Colorado 80922
Aaron
Job Details:
01/19/2024
"Large scratch on cooktop, removed and replaced top, no scratches or dents, verified by customer. Advised customer of 5 star survey."
We serviced a
KITCHENAID RANGE
Model KFGD500ESS00
Near Colorado Springs, Colorado 80905
Carlos
Job Details:
01/19/2024
"Installed igniter, ran test op all ok cx paid labor $189.95 CC Auth# 9LLPE4"
We serviced a
WHIRLPOOL WASHER
Model WTW7120HW0
Near Colorado Springs, Colorado 80910
Carlos
Job Details:
01/19/2024
"Installed control board, ran test, runs ok."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS331SDHM06
Near Colorado Springs, Colorado 80922
Aaron
Job Details:
01/19/2024
"Dent and scratches on RC door, removed and replaced door, no scratches or dents, verified by customer. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL DRYER
Model WED49STBW
Near Peyton, Colorado 80831
Aaron
Job Details:
01/19/2024
"Thermal fuse shorted out, removed and replaced fuse, tested, working and heating well now. Advised customer of 5 star survey."
We serviced a
COVE DISHWASHER
Model DW2450WS
Near Colorado Springs, Colorado 80906
Roman
Job Details:
01/19/2024
"Error code is for a fill issue, ran the dw and it started filling slowly and then fully started filling indicating the pipes were slightly frozen. Recommend keeping an eye on it when running in cold temperatures. Dw is working fine otherwise all three spray arms are spinning."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDBM00
Near Grand Junction, Colorado 81507
James R
Job Details:
01/19/2024
Checked freezer temp. Unit is -6 plenty cold enough to make ice. Removed icemaker dumped old ice then reinstalled ice tray unit cycled out ice and filled with water. Is indicating that icemaker cycles and puts in water. May have been that icemaker bale arm was hitting what ice was in the tray. So the arm was up so it wouldnt make ice. At this point unit appears to be working properly. Customer will let us know if further issues. Paid service call $149.95 auth code. C44KR3Please fill out whirlpool tech satisfaction survey. Thank You. Put into diagnostics test 36 icebox fan comes on test 37 icebox thermistor passes shows good. Test 3 indicates fan motor and air baffle motor are working.
We serviced a
MAYTAG WASHER
Model MVWB865GW0
Near Grand Junction, Colorado 81505
James R
Job Details:
01/19/2024
F0E3 overloadF0E5 off balanced loadF7E9 lock rotorCleared all codes. Run service diagnostics test no error codes returned. test 51 Found something between agitatitor. Removed. Test agitate cycle grinding gone. ok. Checked under unit. Looks good. Also did test 52 load size calibration cycle ok. Put into test 14 agitate sounds fine. Test 12 high speed spin ok. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Colorado Springs, Colorado 80923
Glenn
Job Details:
01/19/2024
"Install New Gearcase, Block, Spanner Nut, Cam Kit, Shifter & Belt. Calibrate Unit, Diag Test:OK , Ran Quick Cycle > Pass"
We serviced a
KITCHENAID RANGE
Model KSEG700ESS6
Near Colorado Springs, Colorado 80917
Glenn
Job Details:
01/19/2024
"f8e0 - Cooling Fan Speed Too LowFound both connections to cooling motor unplugged and harness laying completely on opposite side of unit?! Appears that it was never plugged in? Re-assembled unit, All OPS Test:OK. Pre-heated oven to 325F Convection Bake. All OPS Test:OK"
We serviced a
KITCHENAID OTR MICROWAVE
Model KMHS120ESS-09
Near Colorado Springs, Colorado 80907
Ralph
Job Details:
01/19/2024
"rocker narm did not reset when door was open , remeedied the issue and unit checked okay...,autho no. N939KK"
We serviced a
GE DRYER
Model HTX24EASKWSMTM
Near Colorado Springs, Colorado 80906
Roman
Job Details:
01/19/2024
"Removed the old heater and heater wire, installed thermostats onto the new heater and installed upgraded wire. Put the dryer back together and tested it. Dryer is heating up and working great."
We serviced a
MAYTAG DRYER
Model MED5030MW0
Near Grand Junction, Colorado 81504
James R
Job Details:
01/19/2024
Replaced white console and elec. contol assy. operation is normal. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
SHARP MICROWAVE
Model R-530ES-T
Near Colorado Springs, Colorado 80904
David
Job Details:
01/19/2024
Installed turn table motor Tested and working good
We serviced a
WHIRLPOOL WASHER
Model WFW5620HW2
Near Colorado Springs, Colorado 80921
Kris
Job Details:
01/19/2024
units ui doesn not respond load and go dispenser sensor is not registering. will need listed parts befroe i can make a determination if unit has any other issues.W11322903 298.67W11458345 194.44
We serviced a
SAMSUNG MICROWAVE
Model ME21A706BQN/AA
Near Colorado Springs, Colorado 80905
David
Job Details:
01/19/2024
Replaced magnetronTested and heating good
We serviced a
WHIRLPOOL WASHER TOP LOAD
Model WTW8000BW0I
Near Colorado Springs, Colorado 80906
Roman
Job Details:
01/19/2024
"Noticed the washer was way out of balance, ran it and the lid lock was not locking the first try, ran it a few more times and washer did not squeak or have an issue with the lid lock. Cx mentioned they had water line freezing and freezing inside the washer. Would not recommend using the washer when its really cold without making sure the lines and anything else is not frozen. Adjusted the washer and leveled it. Ran it again and did not have any other issue happen. Drain pump is making a rattling noise and could have been damaged when it froze but is pumping out water very well. Lid lock #WPW10619844 $138.96Card for sc did not go through"
We serviced a
SUBZERO REFRIGERATOR
Model IC-30RID-RH
Near Colorado Springs, Colorado 80906
Ralph
Job Details:
01/19/2024
"unit is still under full warranty, cust says unit popping breaker, this is a fridge and nex to it is thefreezwee, both units are plugged into the same breaker and breaker is either a gfci or anarc fault, so will cust ccould here bill from tech support say bboth units need to have its own outlet and on dedicated breakers, we also checked for errors and found no errors, complerted call"
We serviced a
SAMSUNG GAS RANGE
Model NX60A6511SS/AA
Near Colorado Springs, Colorado 80907
Jerimiah
Job Details:
01/19/2024
"Display is dead, techline says needs display and control board replaced, Cust will look for new appliance. Labor would have been $169.95. $142.95 CC Auth# NRYC49DG94-04041B control board $272.06DG92-01232A display $269.58"