We serviced a
WHIRLPOOL WALLOVEN
Model WOC54EC0HS04
Near Albuquerque, New Mexico 87120
Joseph
Job Details: 02/10/2023
installed parts listed. unit tested good. unit is good to go.
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5201SG/AA
Near Peyton, Colorado 80831
Jonny
Job Details: 02/10/2023
Got c-39 error code icemaker is an issuePcb da92-01199b 270.26IM da97-15217d 189.00Auger da97-12540g 323.94Tax 64.22qsf 129.95 14.50 Labor 159.95 Autho#t4x494Will think on it
We serviced a
FRIGIDAIRE REFRIGERATOR
Model FFHB2740PSBA
Near Colorado Springs, Colorado 80907
Ralph
Job Details: 02/10/2023
INSTALLED PART CUST TO MONITOR...CUST PAID TOTAL AUTHO NO. HKXAEE
We serviced a
WHIRLPOOL DRYER ELECTRIC
Model WED9750WW0
Near Colorado Springs, Colorado 80905
Jeremy
Job Details: 02/10/2023
Noise coming from grim stuck between rollers/ pulley and pins. Cleaned inside of dryer including rollers and pins. Noise issue is gone. Service Charge $129.90 Labor $159.95 Total $289.90 Auth:TCV4Y9
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ0
Near Albuquerque, New Mexico 87109
Larry
Job Details: 02/10/2023
Installed sump and tetsted good - Unit is good to go
We serviced a
SAMSUNG REFRIGERATOR
Model RF28JBEDBSG/AA
Near Colorado Springs, Colorado 80920
Brandon
Job Details: 02/10/2023
"Ice maker and pcb needs replaced, ice maker frozen thawed out for cx and reset ice maker, cx would like to wait on repair, da97-15217a Im, da92-00591c pcb, da97-14474a ice trayCollected $129.95 Auth# M9A4WHLabor $169.95Parts $578.22Tax $47.41Mps $14.50"
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS01
Near Colorado Springs, Colorado 80919
Jim
Job Details: 02/10/2023
replaced the top left led light unit test ok
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ0
Near Albuquerque, New Mexico 87109
Larry
Job Details: 02/10/2023
CX complaint - Not draining completely - Inspected unit and found the drain hose didn;t have a high loop - Installed high loop and tested good - Unit is good to goCollected $301.94-Auth-KW349L
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Albuquerque, New Mexico 87105
Larry
Job Details: 02/10/2023
Cx complaint - Washer wont finish load - Inspected unit and found the unit out of calibration - Recalibrated unit and tested good - Unitis good to go
We serviced a
SUBZERO REFRIGERATOR
Model 532
Near Colorado Springs, Colorado 80904
Ralph
Job Details: 02/10/2023
"was not the fan i thought it was, i made an adjustement to the freezer evap unit checked okay"
We serviced a
MAYTAG WASHER
Model MVW6200KW2
Near Rifle, Colorado 81650
James R
Job Details: 02/10/2023
printed labels and ready to ship.
We serviced a
SAMSUNG REFRIGERATOR
Model DRF427500AP
Near Colorado Springs, Colorado 80909
Jonny
Job Details: 02/10/2023
"Gave custy fridge education, she didn't kno she could change her flex zone, custy is happy"
We serviced a
GE REFRIGERATOR
Model PTS25LHSARCC
Near Colorado Springs, Colorado 80922
Kris
Job Details: 02/10/2023
parts nla
We serviced a
WHIRLPOOL DRYER
Model MED7230HC0
Near Grand Lake, Colorado 80447
Antonio
Job Details: 02/09/2023
found burnt wires harness and acu customer is going to call whlp for assasitance with parts service call $149.99AUTH#U9XR94
We serviced a
KITCHEN AID REFRIGERATOR
Model KRBR109ESS01
Near Tabernash, Colorado 80478
Antonio
Job Details: 02/09/2023
installed new sliders tested unit uint tested good
We serviced a
MAYTAG DRYER
Model MED7230HC2
Near Colorado Springs, Colorado 80927
Aaron
Job Details: 02/09/2023
"Unit is working as designed, error does not appear when the unit is disconnected from the wall vent, temperatures are good and unit has good push, techline states that unit works as designed, the longer the vent line, the longer it will take to dry and can cause the code. Vent line goes up 10 ft, 90 degree turn and then across the house. Same SR number used as before. Advised of 5 star survey"
We serviced a
SAMSUNG DRYER ELECTRIC
Model DVE50M7450W/A3
Near Colorado Springs, Colorado 80925
Ken
Job Details: 02/09/2023
Installed element and tested. Collecting labor and sc 324.40 auth jukaxr
We serviced a
WOLF RANGE
Model IR365PE/S/PH
Near Monument, Colorado 80132
Jessie
Job Details: 02/09/2023
"- replaced cavity, test all functions. all ok"
We serviced a
SUBZERO REFRIGERATOR
Model 700TR2
Near Colorado Springs, Colorado 80908
Jessie
Job Details: 02/09/2023
"- replaced drawer evap and filter drier. unit charged 5 ounces. monitored temps. both sections all ok$1,150.95 autho#cxa49p"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ08
Near Colorado Springs, Colorado 80919
Kris
Job Details: 02/09/2023
installed all parts sent ran test op all ok
We serviced a
MAYTAG WASHER
Model MVWB835DW4
Near Colorado Springs, Colorado 80907
Jeremy
Job Details: 02/09/2023
Installed both new parts. Secured PCB for core. Ran Service Diagnostics Verification Cycle. Unit is working to specifications.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ08
Near Florissant, Colorado 80816
Ralph
Job Details: 02/09/2023
INSTALLED LISTED PARTS AND UNIT CHECKED OKAY
We serviced a
SAMSUNG WASHER
Model WF45A6400AV/US
Near Pueblo, Colorado 81003
Jonny
Job Details: 02/09/2023
"Installed parts hass passed, drain tub3 was in too far so adjusted it and gave custy washer education"
We serviced a
BLUESTAR COOKTOP
Model RBCT365BSSBSS
Near Monument, Colorado 80132
Jerimiah
Job Details: 02/09/2023
"4 of 5 burner heads continually clicked after ignition. Cleaned one igniter, reset spark gap for another, 2 other burner heads need bases replaced. Charging service call BR Burner head CSK-600173FR Burner head CSK-600174"
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017FB0
Near Colorado Springs, Colorado 80917
Kris
Job Details: 02/09/2023
unit has bad control. light relay is stuck on. will need to replace. cx does not want to do repair.
We serviced a
KITCHENAID RANGE
Model KSGG700ESS2
Near Fowler, Colorado 81039
James
Job Details: 02/09/2023
"Talked survey. Installed pre ordered door glass, ops ckok"
We serviced a
KITCHEN AID DISHWASHER
Model KDTE334GPSO
Near Colorado Springs, Colorado 80920
Kris
Job Details: 02/09/2023
installed pump ran test op all ok unit is working to spec.
We serviced a
KITCHENAID REFRIGERATOR
Model KSSC42FMS02
Near Colorado Springs, Colorado 80908
Kris
Job Details: 02/09/2023
pic of quote in quick pics colected scfc temp@38.9 rc temp @49.2 unit is set to 0 on freezer and 34 on ref. checked all fans all ok. compressor is not running checked power to inverter. power in7735697143
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC704FPS05
Near Colorado Springs, Colorado 80921
Kris
Job Details: 02/09/2023
unit had locked display showed cx how to unlock. reseated connections all ok.
We serviced a
BOSCH DISHWASHER
Model FHPM78Z55N/20
Near Colorado Springs, Colorado 80921
Kris
Job Details: 02/09/2023
ran test op could not get unit to duplicate problem. reseated terminals all ok. unit is working to spec at this time.
We serviced a
KITCHENAID DISHWASHER
Model n/a
Near Larkspur, Colorado 80118
Kris
Job Details: 02/09/2023
reinstalled door spring. all ok cx is aware of 5 star survey.
We serviced a
ZLINE COOKTOP - ELECTR
Model RA30
Near Colorado Springs, Colorado 80919
Jerimiah
Job Details: 02/09/2023
"Cust saying temp is 50 too low. Bake and broil elements heat up, high bake unit preheated to 350 in 15 minutes, high bake represents preheat functions only, and should not be used in cooking food. Low bake should be used only once preheat is reached. Convection fan is utilized in convection modes and high bake but does not run in low bake."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS555SIHZ06
Near Carbondale, Colorado 81623
James R
Job Details: 02/09/2023
Evaporator is completely frozen over. Thawed out. Put into diagnostics. defrost sensor test checked ok. put into defrost. Not heating. checked connections to heater. Found one not snapped into place. As soon as I put in the proper place. Heater started heating. Repositioned wiring. Was between evap and cover. Put plastic tie around thermistor to hold in place. Wiped up floor behind unit and vac out water in drain tray. Condenser and evap fans working good. Unit op's good. Please fill out customer satisfaction survey. Thank You.
We serviced a
KITCHEN AID REFRIGERATOR
Model KUIX335HPS01
Near Carbondale, Colorado 81623
James R
Job Details: 02/09/2023
"Installed pump asy. Found reservoir back screw mount out of back wall. Reinstalled so could mount it to hold in place. Is working for now but no garentee. unit started. filled, drain pump works. circulating water water is getting cold. customer paid Labor $149.00 Auth code HR3XWM Please fill out customer satisfaction survey. Thank You."
We serviced a
WHIRLPOOL WASHER
Model MHWE300VW00
Near Aspen, Colorado 81611
James R
Job Details: 02/09/2023
replaced drain pump Install kick plate and test in diagnostics. Ok. customer paid $209.00 labor Auth code 43T49R Please fill out customer satisfaction survey.Thank You.
We serviced a
GE MICROWAVE
Model JVM7195SF1SS
Near Colorado Springs, Colorado 80920
Aaron
Job Details: 02/09/2023
"Door has a piece broken off, door tabs are broken as well. Door assem stainless steel WB56X20717 $707.91Tax $58.05Hc $129.95Labor $169.95Total job $1065.86No return on parts30 day estimateAuth hc $129.95 #93XX93"
We serviced a
WHIRLPOOL RANGE
Model WFE320M0JS3
Near Colorado Springs, Colorado 80921
Aaron
Job Details: 02/09/2023
"Unit does not have proper voltage for the unit, tried resetting the breaker, no luck, needs electrician. Property is vacant so couldn't discuss survey or get signature."
We serviced a
WHIRLPOOL OVEN
Model KODE500ESS01
Near Colorado Springs, Colorado 80921
Aaron
Job Details: 02/09/2023
"Both upper and lower ovens are heating well at time of inspection, upper oven has a mat on the bottom of cavity, unit does not have a vent to outside. Cavity has some cooked food debris in the cavity of the unit; however, not smoking at time of inspection. Advised customer on usage. Advised of survey129.95 hc auth #"
We serviced a
MAYTAG WASHER
Model MVWC565FW3
Near Albuquerque, New Mexico 87105
Larry
Job Details: 02/09/2023
CX instruct - Explained operating and proper use and care - Unit is operqting as designed
We serviced a
MAYTAG WASHER
Model MVW4505MW0
Near Albuquerque, New Mexico 87105
Larry
Job Details: 02/09/2023
"CX complaint - Making a loud screaching noise - Inspected unit and found the shifter failed causing the splutch to grind down - Replaced both with ts and tested good - Unit is good to go - Could not called techline to document (SR-7735697020); used 1 W11481722 (Shifter), and 1 W10721967 (CAM) from stock"
We serviced a
WHIRLPOOL OVEN
Model ABC123
Near Albuquerque, New Mexico 87107
Larry
Job Details: 02/09/2023
CX complaint - Sparks and fire inside oven - Inspected unit and found the element failed - There is no M/S# on the unit the data tag has completely faded - Advised cx that i cannot look up parts for the unit - CX is going to replace it because it is like 30 years old - Called safety and they are closed - Unit is unrepairable
We serviced a
WHIRLPOOL DRYER
Model MED5630HC0
Near Aspen, Colorado 81611
James R
Job Details: 02/09/2023
"Tore apart unit needed ca repair kit 4392067,bracket W10837240 and a Element WP3387747paid $489.85 auth code394C9H Please fill out customer satisfaction survey Thank You.; used 1 W10837240 (Bracket), 1 WP3387747 (ELEMENT), and 1 4392067 (Dryer Repair Kit) from stock"
We serviced a
WHIRLPOOL WASHER
Model MVW7232HW0
Near Peyton, Colorado 80831
Aaron
Job Details: 02/09/2023
Replaced parts and ran unit through DLMS and diagnostic cycles. Working well now. Advised customer of survey
We serviced a
MAYTAG WASHER
Model MVWX700XL2
Near Colorado Springs, Colorado 80907
Jim
Job Details: 02/09/2023
"found the washplate is inop, replaced the washplate unit test ok pd master card; pckd up 1 WPW10553968 (washplate)"
We serviced a
WHIRLPOOL WALLOVEN
Model WOC54EC7AS01
Near Los Alamos, New Mexico 87544
Jason
Job Details: 02/09/2023
checked unit found wide innerface board is bad and appliance manager may also be badSC$140.02LABOR$160.55MISC$17.50WIDE INNERFACE#WPW10412514$240.80M/W APPLIANCE MANAGER#WPW10486188$270.44FUSE#WP4375321$26.22TX$44.07TOTAL$899.60CK AUTHO#N9RWA9$140.02
We serviced a
GENERAL ELECTRIC DRYER - ELECTRIC
Model GTD42EASJ2WW
Near Colorado Springs, Colorado 80907
Jim
Job Details: 02/09/2023
found the voltage to the dryer was not 240 volts reccommend a license electrician for the repair
We serviced a
WHIRLPOOL DISHWASHER
Model WDF330PAHB4
Near Santa Fe, New Mexico 87507
Jason
Job Details: 02/09/2023
"Installed element, ran diagnostic cycle unit checks ok"
We serviced a
WHIRLPOOL WASHER
Model WTW8127LC1
Near Rocky Ford, Colorado 81067
James
Job Details: 02/09/2023
Installed pre ordered parts. ops all ckok advised cust on proper loading and sorting
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW2
Near Santa Fe, New Mexico 87508
Jason
Job Details: 02/09/2023
installed drain pump unit checks ok
We serviced a
KITCHENAID WALLOVEN
Model KOSE500ESS20
Near Albuquerque, New Mexico 87107
Larry
Job Details: 02/09/2023
Installed door glass ans tested good - Unit is good to go
We serviced a
WHIRLPOOL RANGE
Model WFC315S0JS3
Near Albuquerque, New Mexico 87114
Joseph
Job Details: 02/09/2023
install part listed. unit tested good. unit is good to go.
We serviced a
MAYTAG DRYER
Model MED6200KW0
Near Colorado Springs, Colorado 80911
Brandon
Job Details: 02/09/2023
Replaced parts and tested op all ok unit has no errors service mode passed all components
We serviced a
KITCHEN AID WALL OVEN
Model KODE500ESS20
Near Colorado Springs, Colorado 80922
Jerimiah
Job Details: 02/09/2023
Installed replacement TCO. Unit check ok. Disclosed survey to cust. 5 star FCC.
We serviced a
MAYTAG DRYER - ELECTRIC
Model MEDB835DW4
Near Fountain, Colorado 80817
Ken
Job Details: 02/09/2023
Installed heater and fuse and tested. Advised customer to change vent hose to rigid if possible. Wash room is tight and accordion style hose has to turn 90 degrees and is collapsing and not letting air flow correctl
We serviced a
SAMSUNG REFRIGERATOR
Model RF265BEAESG/AA
Near Colorado Springs, Colorado 80911
Brandon
Job Details: 02/09/2023
Replaced parts reset ice maker it cycled sealed Ice room hass passed told cx about survey
We serviced a
SAMSUNG WASHER
Model WF45T6000AW/A5
Near Fountain, Colorado 80817
Brandon
Job Details: 02/09/2023
I leveled unit completely did horizontal test with weights calibrated unit washed a load and unit is much better but main issue I believe Is the floor gives just enough to cause the violent shaking I observed the floor flexing while unit was in spin mode I informed cx of my findings hass passed unit is working as it should
We serviced a
MAYTAG DRYER
Model MEDC465HW0
Near Rio Rancho, New Mexico 87144
Joseph
Job Details: 02/09/2023
unit making buzzing noise. replaced rollers and idler. test unit after repair. unit ested good. unit is good to go.; used 1 4392067 (Dryer Repair Kit) from stock
We serviced a
SAMSUNG RANGE
Model NE63B8211SS/AA
Near Pueblo, Colorado 81005
Jonny
Job Details: 02/09/2023
"Installed parts, called techline, hass wouldn't work"
We serviced a
AMANA DISHWASHER
Model ADB1400AGS3
Near Rio Rancho, New Mexico 87124
Joseph
Job Details: 02/09/2023
installed parts listed. unit tested good. unit is good to go.
We serviced a
SAMSUNG DISHWASHER - BUI
Model DW80R5060US
Near Fountain, Colorado 80817
Brandon
Job Details: 02/09/2023
Removed debris from bottom spray and found upper spray arm not connected I reconnected and tested op ran smart install mode passed all ok
We serviced a
MAYTAG DISHWASHER
Model MDB9979SKZ0
Near Colorado Springs, Colorado 80918
Jeremy
Job Details: 02/09/2023
Installed new parts. Test ran unit. Everything working as designed. Explained why and asked CX to do survey.
We serviced a
SAMSUNG REFRIGERATOR
Model RF23R6201SR/AA
Near Colorado Springs, Colorado 80925
Brandon
Job Details: 02/09/2023
Replaced parts reset ice maker it cycled told cx about survey
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5201SR/AA
Near Pueblo, Colorado 81006
Jonny
Job Details: 02/09/2023
"Installed part, hass wouldn't connect"
We serviced a
SAMSUNG WASHER
Model WF45B6300AW/US 01
Near Colorado Springs, Colorado 80923
Jeremy
Job Details: 02/09/2023
Installed new parts. Washer is now correctly proceeding though cycle. Ran HASS diagnostics and gat a pass.Informed CX about the survey.
We serviced a
BOSCH FRENCH DOOR REFR
Model B36CD50SNS/02
Near Fraser, Colorado 80442
Erik
Job Details: 02/09/2023
install parts and load test - goodcustomer education: allow 24 hr for ice production
We serviced a
SAMSUNG REFRIGERATOR
Model RS25H5111SR/AA
Near Colorado Springs, Colorado 80918
Jonny
Job Details: 02/09/2023
Gave the piece to them on the porch
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS01
Near Elbert, Colorado 80106
Glenn
Job Details: 02/09/2023
"Unit making Fan Noise, Found torn RS Door Gasket. P/N: W10846057 $375.00 + Tax $30.75, MPS $14.50, Labor $184.95, Ice build up in Freezer & FF Evap. Also Has Bad Deli UI / Harness issue. Customer declined further repairs, wants to buy new unit. Cell Used for charge: 303 981-9251, Paid $244.95, Autho#99KCT9"
We serviced a
WHIRLPOOL RANGE
Model WFG510S0HS1
Near Clifton, Colorado 81520
James R
Job Details: 02/09/2023
started oven. could hear it try to lite. Gas came in but no spark. removed cover over bake burner. Tried to start oven again. This time it lit. turned off. checked igniter wire is loose where it connects. Removed and crimped connection. put back on it is tight. Tried again. lit good. let unit heat up to 350 degrees and let cycle on and off several time. Bake burner lit every time. Op's ok. Please fill out customer satisfaction survey. Thank You.
We serviced a
AMANA RANGE
Model ARR-405-L
Near Colorado Springs, Colorado 80909
Ken
Job Details: 02/08/2023
Parts are nla unit is from early 80s collected sc 129.95 auth fy4hjl
We serviced a
WHIRLPOOL M/W OTR
Model WMH78019HV2
Near Edgewood, New Mexico 87015
Jason
Job Details: 02/08/2023
Checked unit found wave guide/ cavity got damaged part is not serviceable cx to call extended warranty company with file number7735683964
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKZ0
Near Vail, Colorado 81657
Antonio
Job Details: 02/08/2023
installed new ui baord and panel tested unit unit tested good
We serviced a
WHIRLPOOL WASHER
Model MEDB835DW4
Near Colorado Springs, Colorado 80923
Aaron
Job Details: 02/08/2023
"Idler and tub rollers have worn, comes as a kit, rest of unit is in good condition. Approved on site. Replaced parts and tested unit, working well now. Repair kit 4392067 $74.75Tax $6.13Hc $129.95Labor $159.95Total job $370.78Auth $370.78 #3499HENo return on parts Advised of 5 star survey"
We serviced a
WHIRLPOOL WASHER
Model WFW85HEFW1
Near Colorado Springs, Colorado 80923
Aaron
Job Details: 02/08/2023
"Drain catch full of debris, not allowing water to pass, cleared and tested, draining well now. Advised of 5 star survey Auth $129.95 check #H9W3RA"
We serviced a
SAMSUNG REFRIGERATOR
Model RF28K9380SG/AA
Near Colorado Springs, Colorado 80922
Jeremy
Job Details: 02/08/2023
Installed all parts. HASS passed. Everything seems to be working as designed.
We serviced a
MAYTAG DRYER
Model MGD5500FW0
Near Colorado Springs, Colorado 80905
Jim
Job Details: 02/08/2023
"replaced the drum rollers, idler pulley and the drive belt unit test ok; pckd up 1 4392067 (dryer repair kit)"
We serviced a
JENN-AIR RANGE
Model JDS9865BDP
Near Colorado Springs, Colorado 80906
Jim
Job Details: 02/08/2023
"found the unit will not light all burners until 90 seconds, the pressure regulator is inop, reccommend replace the pressure regulator, pressure regulator is discontinued by whirpool,collecting service call"
We serviced a
BOSCH DISHWASHER
Model SHPM98W75N/10
Near Colorado Springs, Colorado 80906
Jim
Job Details: 02/08/2023
"E15 error leak detection, pulled unit from under counter inspect no water in bottom, ran unit in auto cycle, no leaks during cycle, having customer moniter for leak pd service call"
We serviced a
WHIRLPOOL WASHER
Model n/a
Near Colorado Springs, Colorado 80938
Aaron
Job Details: 02/08/2023
"Control board is shorted out, not sending power to components, pump filter clear of debris, dryer is stacked on washer, unable to get door lock free. Needs control board and door lock. Two technicians needed for repair. Control w11322879 $287.69Door lock w11316250 $160.78Total parts $448.47Tax $36.77Supplies $14.50Hc $129.95Labor $189.95?2= $379.90Total job $1,009.5930 day estimateNo return on partsAuth hc $129.95 #N49N9X"
We serviced a
ZEPHYR RANGE HOOD
Model AK9246BS
Near Monument, Colorado 80132
Jerimiah
Job Details: 02/08/2023
Installed replacement boards. Unit check ok.Mod
We serviced a
JENN-AIR MICROWAVE
Model JMW2430IL02
Near Monument, Colorado 80132
Jerimiah
Job Details: 02/08/2023
Installed replacement broil element. Unit check ok. Charged service call and labor. Disclosed survey to cust 5star FCC.
We serviced a
MAYTAG WASHER
Model MVWC416FW1
Near Colorado Springs, Colorado 80927
Aaron
Job Details: 02/08/2023
"Suspension has worn over time, tub pushed against a piece of plastic under the unit, belt and drive pulley are rubbing against belt guard. Suspension w10780045 $121.50Drive pulley assem w10721967 $74.70Belt guard wpw10550173 $23.42Total parts $219.62Tax $18.01Hc $129.95Labor $189.95Total job $557.5330 day estimateNo return on partsAuth hc $129.95 #44H493"
We serviced a
BLUESTAR FREEZER
Model BIF30R0
Near Colorado Springs, Colorado 80907
Ralph
Job Details: 02/08/2023
"INSTALLED DOOR PANEL, UNIT CHEKCED OKAY"
We serviced a
WHIRLPOOL WASHER
Model WTW7120HW0
Near Colorado Springs, Colorado 80939
Aaron
Job Details: 02/08/2023
"Control board is shorted out, not sending power to components, rest of unit is in good condition. Control w11419051 $287.69Tax $ 23.59Hc $129.95Labor $159.95Total job $601.1830 day estimate No return on parts Auth $129.95 hc#THK3W9"
We serviced a
VIKING MICROWAVE
Model VMOC205SS
Near Colorado Springs, Colorado 80908
Jessie
Job Details: 02/08/2023
- unit had bad bottom switch with melted contacts. $374.40 autho#449t93
We serviced a
MIELE DISHWASHER
Model G6665SCVI
Near Colorado Springs, Colorado 80920
Jessie
Job Details: 02/08/2023
"- door cable isnt broken. the base that holds the spring has snapped. i tried to make a fix but this will not work. will need to replace right side plynth. door is hanging below 90, could be bent. customer has no incidences of door dropping issues or anything falling on it. plinth right side#9958321 $165.22tax $13.55sc paidlabor $225total $403.77customer will think about repair. 30 days estimate"
We serviced a
WHIRLPOOL WALL OVEN
Model WOC54EC0HS20
Near Monument, Colorado 80132
Jessie
Job Details: 02/08/2023
"- replaced door, test op, all okdiscussed 5 star survey over phone"
We serviced a
MAYTAG WASHER
Model MVW6230RHW2
Near Los Lunas, New Mexico 87031
Larry
Job Details: 02/08/2023
Installed parts listed and tested good - Unit is good to go
We serviced a
KITCHENAID REFRIGERATOR
Model KRSF705HBS04
Near Colorado Springs, Colorado 80924
Kris
Job Details: 02/08/2023
installed cover all ok. cx is aware of 5 star survey.
We serviced a
WOLF RANGE
Model DF48650G/S/P
Near Colorado Springs, Colorado 80908
Jerimiah
Job Details: 02/08/2023
Installed replacement DSI board and griddle thermostat. Unit check ok.
We serviced a
BOSCH DISHWASHER
Model SHP878ZD5N/18
Near Colorado Springs, Colorado 80908
Kris
Job Details: 02/08/2023
installed door panel all ok. cx was not home for survey
We serviced a
WHIRLPOOL WASHER
Model WTW4955HW3
Near Monument, Colorado 80132
Jessie
Job Details: 02/08/2023
"- replaced listed parts, test op, unit passed service test. calibrated the unit. all ok5 star survey discussed"
We serviced a
GE STOVE
Model PGB916SEM1SS
Near Colorado Springs, Colorado 80917
Jerimiah
Job Details: 02/08/2023
"Cust complaint of gas smell when unit is off, intermittent, and gas smell near front door when unit is in back of house. Verified bake and broil are calibrated properly, adjusted needed surface burners to proper height. Suggested Cust call utilities and have them do a sniffer test to find and verify culprit. Charged service call. $142.95 CC Auth# 4NW44K"
We serviced a
GE DISHWASHER
Model PDT785SYN8FS
Near Vail, Colorado 81657
Erik
Job Details: 02/08/2023
connect to SmartHQ service:F34 leak pan detected - run test cycle for leak check: CLEAR ERROR CODES - water stains found in drain pan - RUN HEAVY CYCLE (red dye test) NO LEAKS FOUND!!!Installed on snowy day - suspect snow got into drain pan and melted
We serviced a
WHIRLPOOL DISHWASHER
Model WDF540PADW3
Near Colorado Springs, Colorado 80918
Glenn
Job Details: 02/08/2023
"Install New Sump & Motor Assy, Clip.All OPS Test:OK, No Leaks. Installed Leak Detector for safety."
We serviced a
MAYTAG WASHER
Model MHW3505FW0
Near Los Lunas, New Mexico 87031
Larry
Job Details: 02/08/2023
Installed pressure switch and tested good - Unit is good to go
We serviced a
MAYTAG DISHWASHER
Model MDB8989SHZ
Near Colorado Springs, Colorado 80908
Kris
Job Details: 02/08/2023
installed boards ran test op all ok. unit is working to spec.
We serviced a
MAYTAG WASHER
Model MVW7232HW0
Near Bosque Farms, New Mexico 87068
Larry
Job Details: 02/08/2023
CX instruct - Explained proper use and care - Unit is operatnig as designed
We serviced a
WHIRLPOOL REFRIGERATOR
Model JF36NXFXDE01
Near Leadville, Colorado 80461
Antonio
Job Details: 02/08/2023
found unit rear leg damaged also foam is coming threw on inner linnig walls called whlpSR#7735690111 is going up for review.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS335SDHM06
Near Colorado Springs, Colorado 80921
Jessie
Job Details: 02/08/2023
- adjusted fan assy and blade. fan was hitting. took a sound meter reading of 38.6 less than a library. all ok5 star survey discussed
We serviced a
MAYTAG WASHER
Model MED5630HW2
Near Colorado Springs, Colorado 80915
Jessie
Job Details: 02/08/2023
"- replaced repair kit, test op, all ok5 star survey discussed"