Service History 501 - D3 Appliance

We serviced a

WHIRLPOOL WALLOVEN

Model WOS31ES0JS01

Near Rio Rancho, New Mexico 87124

Joseph

Job Details: 01/13/2023

install part listed unit tested good. unit is good to go.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRT318FMDW09

Near Rio Rancho, New Mexico 87124

Joseph

Job Details: 01/13/2023

installed parts listed. unit tested good. unit is good to go. let customer know to wait 24 hours for cooling.

We serviced a

WHIRLPOOL WASHER

Model MVWB865GW0

Near Albuquerque, New Mexico 87114

Joseph

Job Details: 01/13/2023

door is cracked at the left hinge. door wont close right. customer will need new door. unit is out of warranty. customer denied repair due to cost of repair but we did collect service charge of 129.95.Auth code:4TY34J

We serviced a

SAMSUNG WASHER

Model WA55A7700AV/US

Near Colorado Springs, Colorado 80910

Jonny

Job Details: 01/13/2023

"Installed part, unit works, custy is happy"

We serviced a

SAMSUNG OVEN

Model NE63A6511SS/AA

Near Colorado Springs, Colorado 80920

Aaron

Job Details: 01/13/2023

Samsung tech support called as requested. Samsung will not cover warranty on a melted terminal block. Estimate approved on site. Replaced parts and tested unit. Heating well. Terminal block dg96-00173a $95.36Screws ea ?6 de60-10199a $13.50?6Total parts $176.36Tax $14.46Hc $129.95Labor $ 159.95Total job $480.72No return on parts

We serviced a

WHIRLPOOL WASHER

Model WFW6620HC3

Near Grand Junction, Colorado 81507

James R

Job Details: 01/13/2023

Install pads under rear and front adjustment feet. To try to keep it from moving around.Run unit with a load of towels. Quick wash. Unit still seems to shake quite abit with a load in it. customer will need to call whirlpool and request a different service company with two men to do repairs on unit. It will need a stand and may even need a basket tub asy.

We serviced a

JENN-AIR WALLOVEN

Model JJW2827IM01

Near Grand Junction, Colorado 81507

James R

Job Details: 01/13/2023

replaced lower oven bake element. replaced thermostat lower oven. replaced lower oven cooling fan. powered on. unit came up with F9E0 code Miswire issue and F2E0 UI not connected. pulled bottom drawer out below wall oven and found that the electrical wiring is oiutside of the electrcal box. believe drawer was hitting the wiring. cut pwr and tightened some of the connectors. oven is now working. customer needs to have an electrician come out and redo the electrical wiring. tested all functions. op's ok. normal operation. Please fill out whirlpool customer satisfaction survey. Thank You.

We serviced a

GENERAL ELECTRIC RANGE

Model PHS930YP7FS

Near Frisco, Colorado 80443

Erik

Job Details: 01/13/2023

remove ui control panel and inspect harness(es) - comm cable fell out of harness - reconnect harness and reinstall ui control panel - test - goodcustomer education on proper pan sizing and cleaning cook top

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF736SDAW10

Near Albuquerque, New Mexico 87113

Jason

Job Details: 01/13/2023

installed gasket unit checks okAuth code:WFXA94/$149-

We serviced a

WHIRLPOOL WASHER

Model WTW7120HW0

Near Albuquerque, New Mexico 87122

Jason

Job Details: 01/13/2023

installed console unit opperation checks ok

We serviced a

SAMSUNG REFRIGERATOR

Model RF28HMEDBSR/AA

Near Manitou Springs, Colorado 80829

Brandon

Job Details: 01/13/2023

Replaced parts and reset ice maker it cycled hass passed and sent asked cx to complete survey

We serviced a

MAYTAG WASHER

Model MVW4505MW0

Near Albuquerque, New Mexico 87111

Jason

Job Details: 01/13/2023

installed lid lock unit checks ok

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRT311FZDB02

Near Albuquerque, New Mexico 87112

Jason

Job Details: 01/13/2023

installed door gasket and sealed cabinet to liner gaps unit checks ok

We serviced a

WHIRLPOOL DRYER

Model WED4815EW1

Near Albuquerque, New Mexico 87123

Jason

Job Details: 01/13/2023

"checked unit found roller keeper had come off, re secured roller unit checks ok"

We serviced a

SAMSUNG DISHWASHER

Model DW80M9960UG/AA

Near Colorado Springs, Colorado 80906

Brandon

Job Details: 01/13/2023

"Lc error during cycle, could not locate active leak, took pictures of error codes, cx says this is the third repair and they are going thru their warranty to have replaced, found water marks on drain pump hose and leak sensor may be faulty"

We serviced a

WHIRLPOOL DISHWASHER

Model WDT730PAHV0

Near Colorado Springs, Colorado 80927

Aaron

Job Details: 01/13/2023

"Water inlet valve hose clamp was not secured, cx states someone else had replaced the inlet valve. Tested unit, board keeping valve open too long on second fill, tub is overflowing. Needs board. Control board w11131683 $264.44Tax $21.68Hc $129.95Labor $159.95Total job$576.0230 day estimateAdvised of surveyAuth hc 129.95 #4LA9RU"

We serviced a

SAMSUNG WASHER

Model WV55M9600AW/A5

Near Colorado Springs, Colorado 80909

Jim

Job Details: 01/13/2023

found the top drain pump is inop reccommend replace the drain pump customer declined repair

We serviced a

WHIRLPOOL WASHER

Model WTW4816FW3

Near Colorado Springs, Colorado 80927

Aaron

Job Details: 01/13/2023

"Unit was not level, drain hose not tied, corrected issues and advised customer of usage of the unit. Explained high efficiency units. Working well now.Advised of 5 star survey"

We serviced a

FRIGIDAIRE WALLOVEN

Model FEB27S6DCB

Near Colorado Springs, Colorado 80907

Jerimiah

Job Details: 01/13/2023

"Wasnt able to remove unit from wall, there is no slack on the incoming power cable, must access junction box in crawlspace underneath house in order to do so. However unit is stuck inside and cannot be released. Customer is going to contact CMR or possibly A&E factory to either get the unit removed and/or repaired.. Closing call. No charge due to inability to access unit."

We serviced a

SAMSUNG DRYER

Model DVE45T3400V/A3

Near Colorado Springs, Colorado 80910

Jonny

Job Details: 01/13/2023

"Took dryer apart bcuz I didn't hear any noise, put unit back together, hass passed, gave custy dryer education."

We serviced a

SAMSUNG DRYER

Model DVE54R7600C/A3

Near Colorado Springs, Colorado 80915

Aaron

Job Details: 01/12/2023

"Thermal cut out is shorted out, not allowing unit to heat. Recommend having the vent professionally cleaned as well. Samsung techline believes check vent will reset after replacing the tco. Unit has good airflow at the back of the unit. Tco dc96-00887c $88.86Tax $7.29Hc $129.95Labor $169.95Total job $396.0530 day estimateAdvised of surveyAuth 129.95 hc # 9ty494"

We serviced a

SAMSUNG WASHER

Model WA50R5200AW/US

Near Colorado Springs, Colorado 80904

Brandon

Job Details: 01/12/2023

Replaced parts tested op all ok hass passed and sent asked cx to complete survey

We serviced a

SAMSUNG MICROWAVE

Model ME21M706BAG/AA

Near Colorado Springs, Colorado 80910

Brandon

Job Details: 01/12/2023

Replaced parts and tested op all ok asked cx to complete survey

We serviced a

WHIRLPOOL WASHER

Model WTW5057LW0

Near Albuquerque, New Mexico 87114

Joseph

Job Details: 01/12/2023

installed parts listed. unit tested good. unit is good to go.

We serviced a

WHIRLPOOL DISHWASHER

Model WDF330PAHW4

Near Colorado Springs, Colorado 80918

Aaron

Job Details: 01/12/2023

"Circulation motor is shorted out, needs sump assem. Rest of unit is in good condition. Sump/motor assem. W11025157 $288.78Tax $ 23.68Hc $129.95Labor $169.95Total job $612.3630 day estimateAdvised of 5 star surveyAuth hc 129.95 #9xk3t4"

We serviced a

SAMSUNG DISHWASHER

Model DW80R5061US/AA00

Near Colorado Springs, Colorado 80922

Aaron

Job Details: 01/12/2023

"Tested unit through two Express cycles, small leak coming from inlet valve and tripping leak code Inlet valve DC62-30314L $147.64Tax $12.11Hc $129.95Labor $169.95Total job $459.6530 day estimateAuth 129.95 hc #94h3ew"

We serviced a

MAYTAG DISHWASHER

Model MDB8959SKB0

Near Colorado Springs, Colorado 80908

Aaron

Job Details: 01/12/2023

"Circulation pump hose clamps not firm, leaking water, loss of water in tub doesn't allow proper cleaning, inlet water hose dripping as well causing leak code. Corrected all and tested unit. Working well now. Advised of 5 star survey"

We serviced a

WHIRLPOOL REFRIGERATOR

Model KRFF507HPS03

Near Cripple Creek, Colorado 80813

Ralph

Job Details: 01/12/2023

installed part and unit chekcded okay

We serviced a

MAYTAG DRYER - ELECTRIC

Model MED5500FW2

Near Colorado Springs, Colorado 80917

Jeremy

Job Details: 01/12/2023

installed new heating element and repair kit. Dryer is working as designed.

We serviced a

SAMSUNG RANGE - GAS

Model NX58H5600SS/AA

Near Colorado Springs, Colorado 80909

Jerimiah

Job Details: 01/12/2023

Installed replacement griddle burner valve. Unit check OK

We serviced a

GENERAL ELECTRIC WASHER

Model GTW335ASN1WW

Near Colorado Springs, Colorado 80911

Ken

Job Details: 01/12/2023

Installed basket and agitator

We serviced a

WHIRLPOOL FREEZER

Model WZF34X16DW06

Near Peyton, Colorado 80831

Jessie

Job Details: 01/12/2023

"- replaced evap and uv drier. test op, all ok5 star survey discussed"

We serviced a

WHIRLPOOL WASHER

Model WET4027HW1

Near Colorado Springs, Colorado 80907

Jim

Job Details: 01/12/2023

found the drain pump inop replaced the drain pump unit test ok

We serviced a

WHIRLPOOL DISHWASHER

Model WDT750SAKW0

Near Colorado Springs, Colorado 80907

Jim

Job Details: 01/12/2023

replaced the heat element as per project # 17304 unit test okT A S

We serviced a

WHIRLPOOL WASHER

Model WTW4855HW3

Near Colorado Springs, Colorado 80923

Jeremy

Job Details: 01/12/2023

Installe new cabinet. Test ran unit and double checked for leaks. Emailed athompson@classichomes.com about survey.

We serviced a

WHIRLPOOL DRYER

Model WED4850HW0

Near Colorado Springs, Colorado 80923

Jeremy

Job Details: 01/12/2023

Burning smell may be coming out of back of dryer. Installlers taped vent to dryer leaving gaps for dryer vent air to escape into laundry room. Checked heating coil and nothing burning on it. Recommend CX to use duct clamp to replace foil tape. This is the same dryer as job#491898

We serviced a

GENERAL ELECTRIC RANGE - ELECTRIC

Model JB735SP3SS

Near Palmer Lake, Colorado 80133

Kris

Job Details: 01/12/2023

replaced infinate switch ran test op with cx. cx is aware of 5 star survey.

We serviced a

SUBZERO REFRIGERATOR

Model 690/S

Near Larkspur, Colorado 80118

Kris

Job Details: 01/12/2023

pulled im drilled out screws. cut bracket per tech sheet. cycled ice maker cx will monitor unit for 72 hours.

We serviced a

ASKO DISHWASHER

Model DF1664XXL.U

Near Pueblo, Colorado 81007

James

Job Details: 01/12/2023

Installed ordered parts all ops test good no leaks found

We serviced a

INSINKERATOR DISPOSAL

Model 79051

Near Pueblo West, Colorado 81007

James

Job Details: 01/12/2023

Installed preordered part. All ops test good no leaks found.

We serviced a

KITCHENAID DISHWASHER

Model KDFE204KPS0

Near Pueblo West, Colorado 81007

James

Job Details: 01/12/2023

Found element open causing no heat. Replaced with pre-ordered parts. All ops test good.

We serviced a

MAYTAG WASHER

Model MVW6200KW2

Near Pueblo, Colorado 81004

James

Job Details: 01/12/2023

"Found strike damaged causing unit to not advance cycle. Could not test drain pump but based on customers description most likely will need a drain pump as well. Need strike W11457841 +tax, sc 129.95, labor 149.95, mps 14.50. Total (pre pump) 331.17. If pump W11399437 is needed additional 183.52+tax. Cust declines at this time collected 129.95"

We serviced a

WHIRLPOOL RANGE

Model KSEG700EBS2

Near Pueblo, Colorado 81001

James

Job Details: 01/12/2023

"Found unit with f2e1 code indicating TouchPad issue, needs control assem W11091880 491 71+tax, sc 129.95, labor 169.95, mps 14.50. total: 846.43 cust declines at this time"

We serviced a

BIG CHILL REFRIGERATOR

Model G91629NW

Near Colorado Springs, Colorado 80908

Jessie

Job Details: 01/12/2023

Replaced icemaker sent to customer. Test op. All on

We serviced a

GE COOKTOP

Model JP930K0C1CC

Near Elbert, Colorado 80106

Glenn

Job Details: 01/12/2023

"RF Burner not working, also LF Burner not working properly. Parts No Longer Available.Paid for both tickets on this job.129.95 1st appliance + 89.95 2nd Appliance = $219.90Tried to use customers cell phone, but it was unclear for them to procees app. Bypassed Sign on App, had sign on ticket. Autho#WYTHN9719-339-8854"

We serviced a

GE DRYER

Model GTD65EBSJ3WS

Near Colorado Springs, Colorado 80903

Ken

Job Details: 01/12/2023

Tightened up the screw on the back of the drum and tested sc+100 for labor 229.95 auth a4ju9e

We serviced a

JENN-AIR WALLOVEN

Model JMW2430LL00

Near Colorado Springs, Colorado 80906

Ken

Job Details: 01/12/2023

Installed console and tested. Advised customer to call back if they have anymore issues

We serviced a

JENNAIR OVEN

Model JDRP430WP01

Near Colorado Springs, Colorado 80908

Jerimiah

Job Details: 01/12/2023

"Installed replacement UI board, collected remainder per note. Unit check ok. Returning both cores in as of 1-13-23. $205.17 CC Auth# X9H9WM"

We serviced a

SUBZERO REFRIGERATOR

Model IC-24R

Near Colorado Springs, Colorado 80921

Jessie

Job Details: 01/12/2023

"Customer refrigerator door sticks out slightly. See quick pics. Customer says unit doesn't have suction like the freezer does. I explained why freezer has more.Had to call techline, for any recommendations for the door slightly sticking out. And there are none as of now. No adjustment #$149.95 CK Auth# MTM994"

We serviced a

WHIRLPOOL MICROWAVE

Model KMHC319EBS3

Near Pueblo, Colorado 81001

James

Job Details: 01/12/2023

"Found door separating from frame causing short in ui. Needs door W11205125 501.61+tax, sc 89.95, labor 139.95, mps 14.50. Total : 787.14 cust declines at this time"

We serviced a

SAMSUNG WASHER TOP LOAD

Model WA52A5500AC/US

Near Colorado Springs, Colorado 80925

Brandon

Job Details: 01/12/2023

Replaced pcb and tested op all ok hass passed and sent asked cx to complete survey

We serviced a

MAYTAG WASHER

Model MVW7230HW0

Near Los Lunas, New Mexico 87031

Larry

Job Details: 01/12/2023

Installed UI and tested good - Unit is good to go

We serviced a

SAMSUNG ELECTRON REFRIGERATOR

Model RF28R7201SG/AA

Near Woodland Park, Colorado 80863

Ralph

Job Details: 01/12/2023

installed part and unit checked okay

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS315SDHZ08

Near Albuquerque, New Mexico 87105

Larry

Job Details: 01/12/2023

Found the evap therm not in correct place - Defrosted evap and secured therm - Unit should be good to go

We serviced a

WHIRLPOOL WASHER

Model WTW8500DC5

Near Los Alamos, New Mexico 87544

Jason

Job Details: 01/12/2023

checked unit found unit was out of level causing unit to vibrate leveled unit. operation checks okAuth code:A94CM4 /for $129.25

We serviced a

WHIRLPOOL DISHWASHER

Model WDF520PADM9

Near Rio Rancho, New Mexico 87124

Joseph

Job Details: 01/12/2023

smell coming from dishwasher. customer only uses machine 3 times a month. leaves old water at the bottom of the filter. found debree inside filter. cleaned filter. machine is working as designed. unit tested good. unit is good to go.

We serviced a

MAYTAG WASHER

Model MVW6230HW2

Near Albuquerque, New Mexico 87110

Larry

Job Details: 01/12/2023

Installed parts listed and tested good - Unit is good to go

We serviced a

FISHER & PAYKEL DISH DRAWER

Model DD24DV2T9 N

Near Woodland Park, Colorado 80863

Ralph

Job Details: 01/12/2023

"installed new rotor, still a little loud but the clicking noise has stopped, unit checked okay"

We serviced a

KITCHENAID REFRIGERATOR

Model KRFC704FBS01

Near Santa Fe, New Mexico 87506

Jason

Job Details: 01/12/2023

installed gasket unit checks ok

We serviced a

SAMSUNG DRYER

Model DV42H5600EP/A3

Near Pueblo, Colorado 81005

Jonny

Job Details: 01/12/2023

"Noticed belt was off, put it back on, not hass com4, custy is nappy"

We serviced a

WHIRLPOOL DRYER

Model WED4815EW1

Near Santa Fe, New Mexico 87507

Jason

Job Details: 01/12/2023

installed part unit checks ok

We serviced a

MAYTAG DRYER - ELECTRIC

Model MEDB855DC4

Near Colorado Springs, Colorado 80919

Jim

Job Details: 01/12/2023

found the unit would not heat in the normal setting replaced the control board unit test ok T A S

We serviced a

JENN-AIR REFRIGERATOR

Model JFFCC72EHL03

Near Aspen, Colorado 81611

James R

Job Details: 01/12/2023

Seal that was on door inside outer lip came loose. replaced R.H. fresh food door seal. customer had opened box and layed out flat. seal fit really well. checked for sealing all the way around. Looks good. when try to open door can feel that the magnet is holding well. please fill out customer satisfaction survey. Thank You.

We serviced a

MAYTAG WASHER

Model MHW6630HW0

Near Santa Fe, New Mexico 87507

Jason

Job Details: 01/12/2023

checked unit found control is not supplyong voltage to motor and snutting down SC$140.02LABOR$160.55MISC$17.50CONTROL#W11322883$287.69TX$23.59TOTAL$629.35Auth code:LECH94$140.02

We serviced a

GENERAL ELECTRIC DISHWASHER - BUI

Model GDT550PYR3FS

Near Winter Park, Colorado 80482

Erik

Job Details: 01/12/2023

"connect to SmartHQ diagnosticALERT: failure to drain on at least 1 of the last 5 cycles - check F56 error code diagnostic actionsF56 failure to drain - physically check unit for drain kinks/sump check valve obstructions - none present - replace pumpclear f codes, install pump and test - good"

We serviced a

GENERAL ELECTRIC DRYER

Model GTD33GASK1WW

Near Fraser, Colorado 80442

Erik

Job Details: 01/12/2023

check vent - clearckeck gas connection -ok cable jumper disconnected at switch - re-connect and test - good

We serviced a

GENERAL ELECTRIC RANGE

Model JS645SL6SS

Near Granby, Colorado 80446

Erik

Job Details: 01/12/2023

remove door - replace inner glass

We serviced a

WHIRLPOOL WALLOVEN

Model WOC54EC0HS04

Near Rio Rancho, New Mexico 87144

Joseph

Job Details: 01/12/2023

installed parts listed. unit tested good. unit is good to go.

We serviced a

MAYTAG WASHER

Model MVW7232HW0

Near Albuquerque, New Mexico 87109

Larry

Job Details: 01/12/2023

Installed parts listed and tested good - Unit is good to go

We serviced a

WHIRLPOOL WALLOVEN

Model WOC54EC0HS04

Near Rio Rancho, New Mexico 87144

Joseph

Job Details: 01/12/2023

installed parts listed. unit tested good. unit is good to go.

We serviced a

KITCHENAID DISHWASHER

Model KDPM604KPS0

Near Colorado Springs, Colorado 80908

Aaron

Job Details: 01/12/2023

"Circulation motor vibrating on back bracket, corrected motor and grommet, tested unit and working well, no leaks.Advised of survey"

We serviced a

WHIRLPOOL WASHER

Model WTW5057LW0

Near Albuquerque, New Mexico 87113

Larry

Job Details: 01/12/2023

CX complaint - Makes loud grinding - Inspected unit and found the shifter was misaligned -mAdjusted shifter and tested good - Unit is good to go

We serviced a

MAYTAG DRYER

Model MEDC215EW1

Near New Castle, Colorado 81647

James R

Job Details: 01/12/2023

replaced heat element and cutout. Heat element was bad. checked vent it was pinched not much air flow. corrected. and connected vent. airflow is better. cycling on and off for heat on all cycles. op's of unit is good. repair complete.Suggested to customer to have venting of home cleaned. Please fill out whirlpool customer satisfaction survey. Thank You.

We serviced a

SAMSUNG WASHER

Model WF45T6000AW/A5 53

Near Yoder, Colorado 80864

Glenn

Job Details: 01/12/2023

"Install New Valve, Ran HASS Diagnostics. >PASSNo Internet, so unshure if report sent."

We serviced a

SAMSUNG RANGE - GAS

Model NX58F5700WS/AA

Near Colorado Springs, Colorado 80926

Brandon

Job Details: 01/12/2023

Replaced ignitor and tested op all okCollected labor $169.95 check Auth# 3H44A9

We serviced a

WHIRLPOOL WASHER

Model MVWB765FW3

Near Peralta, New Mexico 87042

Larry

Job Details: 01/12/2023

Unit needs drain pump - CX doesn not want to bear the cost of repair - Collected $129.95 - Auth-4U9R9H

We serviced a

VIKING DISHWASHER

Model UE9

Near Woodland Park, Colorado 80863

Ralph

Job Details: 01/12/2023

"looks like unit had reg dish soap in the unit, added oil and it desolved the soap, cust to monitor"

We serviced a

GENERAL ELECTRIC DISHWASHER

Model PDT715SBNTS

Near Green Mountain Falls, Colorado 80819

Ralph

Job Details: 01/12/2023

"found a loose screw on the upper part of the tub that had loosined, tightened itg and unit chekced okay"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF757SDHZ00

Near Colorado Springs, Colorado 80920

Kris

Job Details: 01/12/2023

found bad led. installed all ok cx is aware of 5 star survey.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRX986SIHZ00

Near Peyton, Colorado 80831

Kris

Job Details: 01/12/2023

installed ice maker. ran test op all ok unit is working to spec. freezer temp@2.5 ref temp@41.9

We serviced a

WHIRLPOOL DISHWASHER

Model WDT750SAKZ0

Near Colorado Springs, Colorado 80924

Aaron

Job Details: 01/12/2023

"No power coming from the board to drain pump or water inlet valve. Needs board. Board acu w11462458 $262.78Tax $21.55Hc $129.95Labor $169.95Total job $584.2330 day estimateNot home to advise of 5 star surveyCc on file not charged 129.95 as of yet, cx not home for approval"

We serviced a

MAYTAG DRYER

Model MEDC465HW0

Near Colorado Springs, Colorado 80911

Jim

Job Details: 01/12/2023

"found the timer not advancing, replaced the timer unit test ok"

We serviced a

GENERAL ELECTRIC RANGE

Model JGS760EP3ES

Near Grand Lake, Colorado 80447

Erik

Job Details: 01/12/2023

installed orifice holder and convert to LP -test - good

We serviced a

WHIRLPOOL WASHER

Model WTW5057LW0

Near Pueblo, Colorado 81003

Jeremy

Job Details: 01/12/2023

"Installed new gearcase and feet. Tested unit. Everything up to munufacturer specs.; (created new UIS, deleted prior attachment to UisID 194146)"

We serviced a

KITCHENAID DISHWASHER

Model KDTE204KPS1

Near Colorado Springs, Colorado 80917

Kris

Job Details: 01/12/2023

ran test op. unit is getting power. pulled door ui was unplugged from contriol. reseated connections ran test op all ok unit is working to spec. did not talk with cx about 5 star survey. unit was at a business.

We serviced a

SAMSUNG WASHER

Model WA55A7300AE/US

Near Colorado Springs, Colorado 80915

Jonny

Job Details: 01/11/2023

"Installed part, hass passed"

We serviced a

KITCHENAID REFRIGERATOR

Model KRMF706ESS01

Near Socorro, New Mexico 87801

Larry

Job Details: 01/11/2023

CX complaint - Right door dragging and scrapping - Adjusted door and tested good - Unit is good to go

We serviced a

MAYTAG WASHER

Model MVW6230HW0

Near Socorro, New Mexico 87801

Larry

Job Details: 01/11/2023

CX complaint - Washer wont start - Inspected unit and found the console won't respont to input - Unit needs new console - Cx doesn't want to bear the cost of repair - COllected $129.95 - Auth-W3KJV4

We serviced a

WHIRLPOOL WASHER

Model WTW5000DW2

Near Edgewood, New Mexico 87015

Jason

Job Details: 01/11/2023

installed parts listed unit checks ok

We serviced a

BEST DOWNDRAFT VENT

Model D49M48SB

Near Monument, Colorado 80132

Jeremy

Job Details: 01/11/2023

Heped JR with downdraft vent

We serviced a

MAYTAG WASHER

Model MVWB765FW3

Near Colorado Springs, Colorado 80916

Jeremy

Job Details: 01/11/2023

suspension poped out. good now

We serviced a

SAMSUNG WASHER

Model WF50BG8300AVUS

Near Colorado Springs, Colorado 80921

Jeremy

Job Details: 01/11/2023

After being on phone with tech support CX must get unit off of the pedistal and put in serviceable position. Unit slighlty unleveled. CX will need to run unit and relay information. Quoted CX 2x179.95 labor and $129.95 Service fee to remove washer off of pedestal.

We serviced a

KITCHEN AID REFRIGERATOR

Model KRMF706ESS05

Near Colorado Springs, Colorado 80927

Aaron

Job Details: 01/11/2023

"Freezer drawer plastic is warped, front panel to drawer is off and unable to reattach correctly, replaced drawer and tested, working well now. Advised of 5 star survey."

We serviced a

WHIRLPOOL WASHER

Model WTW6120HW2

Near Colorado Springs, Colorado 80918

Aaron

Job Details: 01/11/2023

"Vibration caused cap to wiggle loose and disconnect from harness, secured and spoke with techline, ran a dlms recalibration on the unit, tested through diagnostics and working well now. Sr #7735222135Advised of 5 star survey"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRT311FZDM00

Near Colorado Springs, Colorado 80918

Glenn

Job Details: 01/11/2023

"ref- ice maker is not working.Another company already came out a few times, replaced Icemaker, and element? Reseat connections to ice maker, All OPS Test:OK"

We serviced a

SAMSUNG OVEN

Model Nx58m660ws/aa

Near Colorado Springs, Colorado 80923

Aaron

Job Details: 01/11/2023

"Oven igniter reaching 2.8-2.9 ramps, needs consistent 3.2-2.6 to open oven valve. Rest of unit is in good condition. Igniter dg94-00520a $244.50Tax $ 20.05Hc $129.95Labor $159.95Total job $554.4530 day estimateNo return on partsAuth hc 129.95 cc# j4c99j"

We serviced a

WHIRLPOOL DISHWASHER

Model WDT730PAHZ

Near Colorado Springs, Colorado 80923

Aaron

Job Details: 01/11/2023

"Door spring pulling door upwards, adjusted door springs and tested, advised customer. Working well now. Advised of 5 star survey"

We serviced a

WHIRLPOOL M/W OTR

Model WMH32519HW06

Near Colorado Springs, Colorado 80905

Jerimiah

Job Details: 01/11/2023

"Cust had problems with programming light timer, instructions are no help, techline had no information. OTR light functions properly when manually turned on. SR#7735469514. Techline will send videos taken up to engineering. Closing call."

We serviced a

MAYTAG WASHER

Model MVW7232HW0

Near Pueblo, Colorado 81001

James

Job Details: 01/11/2023

Discussed survey. Installed previous techs ordered parts. All ops test good

We serviced a

SAMSUNG ELECTRIC OVEN

Model NE63T8111SS/AA

Near Pueblo, Colorado 81005

James

Job Details: 01/11/2023

Found Cockroaches under unit and in unit Customer will need to get that sorted with proof of completion or find different servicer per TK. No hass ran