We serviced a
SUBZERO REFRIGERATOR
Model 700TCI
Near Colorado Springs, CO 80906
Ralph
Job Details: 12/22/2023
installed part and unit checked okay...autho no. Y939W9
We serviced a
SUB ZERO REFRIGERATOR
Model 611R
Near Colorado Springs, CO 80905
Ralph
Job Details: 12/22/2023
"cust was experiencing siome error codes, at this time everything is running correctly, did find some frost build up that may have been created by a door being left ajar, cleared error codes and told cust to monitor the unit...autho no. W3UV33"
We serviced a
MAYTAG WASHER
Model MVW5430MW0
Near Grand Junction, CO 81504
James R
Job Details: 12/22/2023
Customer signed disclaimer. Found electrical connection at pump not connected properly. Test operation in service diagnostics operation normal and no error codes. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
WHIRLPOOL RANGE
Model WFG550S0HZ1
Near Colorado Springs, CO 80908
Jerimiah
Job Details: 12/22/2023
"Repaired door, unit check ok. Charged service call $149.44 CC Auth# HRUT93"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ08
Near Colorado Springs, CO 80906
Roman
Job Details: 12/22/2023
"Took the freezer section apart and removed the old thermistor, installed new one. Made sure fans and compressor kicked on, fridge working great."
We serviced a
ELECTROLUX DRYER
Model EFME617ST0
Near Colorado Springs, CO 80926
Roman
Job Details: 12/22/2023
"Removed the old control board and installed new one, reconnected hoses and tested the dryer. Dryer working great. Paid labor"
We serviced a
SAMSUNG WASHER
Model WF42H5200AW/A2
Near Colorado Springs, CO 80906
Roman
Job Details: 12/22/2023
Inverter board #DC92-01531B $338.48Tax $27.76Total parts $366.24MPs 14.50Labor $199.95Sc $129.95Total cost $710.64Paid sc
We serviced a
AMANA REFRIGERATOR SID
Model ARS9169AS
Near Colorado Springs, CO 80906
Roman
Job Details: 12/22/2023
Noticed ice build up in the evaporator but fan is rusted and main bearing is shot. Evaporator has good frost. Recommend replacing the Evap fan. Evaporator fan #WP10513803 $160.14Tax $14.13Total parts $173.27MPs $14.50Labor $189.95Sc $129.95Total cost $507.67Paid sc
We serviced a
WOLF RANGE
Model DF48650G/S/P
Near Colorado Springs, CO 80906
Roman
Job Details: 12/22/2023
"Installed new probe and tested it with a potato, temps seem to be getting read and did not come up with error. Range working great."
We serviced a
KITCHENAID ICEMAKER
Model KUIC18NNTS2
Near Colorado Springs, CO 80903
Roman
Job Details: 12/22/2023
"Last time was here there was a broken wire checked the other wires and another one had broken, spliced in new connector and tested the ice maker, ice maker filling getting cold and wire cutter is warm. Waited till I saw a sheet of ice forming, ice maker working great."
We serviced a
WHIRLPOOL RESIDENTIAL REFR
Model WRF767SDHZ04
Near Colorado Springs, CO 80920
David
Job Details: 12/22/2023
Replaced UI and main control board Tested and seems to be working correctly now. If problem persists then may need to get door switches
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ0
Near Colorado Springs, CO 80920
Glenn
Job Details: 12/22/2023
Install New Clip on RS Upper Rack. All OPS Test:OK
We serviced a
WHIRLPOOL RANGE
Model WFE505W0HB5
Near Colorado Springs, CO 80923
Jerimiah
Job Details: 12/22/2023
"Installed replacement parts. Did temp check, adjusted to +5 calibration. Unit check ok."
We serviced a
WHIRLPOOL WASHER
Model WTW7120HW0
Near Colorado Springs, CO 80910
Carlos
Job Details: 12/22/2023
"Installed Control board, Console, latch and bezel, ran test op all ok"
We serviced a
KITCHENAID RANGE
Model KSIS730PSS0
Near Colorado Springs, CO 80920
Glenn
Job Details: 12/22/2023
Install New Lower Cover on rear of unit. All OPS Test:OK
We serviced a
KITCHENAID ICE MACHINE
Model KUIX535HPA01
Near Breckenridge, CO 80424
Antonio
Job Details: 12/22/2023
"Found drain line kinked, not allowing water to flow"
We serviced a
JENN-AIR WALLOVEN
Model JJW2430DS02
Near Breckenridge, CO 80424
Antonio
Job Details: 12/22/2023
Installed new console unit tested good Sc$189.99Lb$189.99Total $379.98 $379.98 CC Auth# M3J49V
We serviced a
MAYTAG DRYER
Model MEDB835DW4
Near Colorado Springs, CO 80925
Carlos
Job Details: 12/22/2023
Installed installed element all ok
We serviced a
SUB ZERO REFRIGERATOR
Model BI-48S/O
Near Cañon City, CO 81212
James
Job Details: 12/22/2023
installed ordered part tested ops ckok
We serviced a
SAMSUNG ELECTRON REFRIGERATOR
Model RF28HMEDBSR/AA
Near Penrose, CO 81240
Jessie
Job Details: 12/22/2023
Replaced im kit. All ok
We serviced a
SAMSUNG GAS RANGE
Model NX60A6511SS/AA
Near Penrose, CO 81240
Jessie
Job Details: 12/22/2023
Customer is burning cookies. Set oven to customer setting convection bake at 375. Customer using spring style thermo. Put my k type lead in oven and watched unit preheat and stabilize. Unit temps are about 10 degrees too hot after 15 mins preheat. Ran haas. All ok
We serviced a
BOSCH REFRIGERATOR
Model B36FD50SNB/02
Near Pueblo, CO 81004
Jessie
Job Details: 12/22/2023
Unit has a restriction in cap line to the valves.Replaced valves and put a service port on high side. Found no leaks after put into vacuum. Charged unit and monitored.. unit cooled to 32 before I left.
We serviced a
ELECTROLUX DRYER
Model ELFE7437AG0
Near Colorado Springs, CO 80905
David
Job Details: 12/22/2023
"Checked dryer All wiring in great shape, Had a little smell when I ran it with vent off.Believe it was the manufacturing oils that were burning off.Hooked up vent, and there is a lot of pressure indicating the vent is very restricted. Frigidaire said to charge them"
We serviced a
MAYTAG DISHWASHER
Model MDB8989SHZ0
Near Peyton, CO 80831
Aaron
Job Details: 12/22/2023
"Unit fills and drains properly, circulation motor is shorted out, Needs motor sump assembly. Motor sump assembly wpw10591570 $281.15Tax $23.05Supplies $14.50Hc $149.95Labor $259.95Total job $728.6030 day estimateNo return on partsAuth $149.95 ck 10774 #C9FV3L"
We serviced a
MAYTAG WASHER
Model MVW7232HW1
Near Colorado Springs, CO 80908
Aaron
Job Details: 12/22/2023
"No error codes upon arrival, found center bolt for rotor missing, removed and replaced slider assembly, tested unit through diagnostics and working well now. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL DRYER
Model WED8127LC1
Near Colorado Springs, CO 80920
Aaron
Job Details: 12/22/2023
"Moisture sensors are not properly relaying to the control board, removed and replaced sensors, tested and heating well now, flexible aluminum venting used, check vent error code as well, recommend professional vent cleaning. Discussed with techline and advised customer of survey. SR7738086052"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRB533CZJZ00
Near Colorado Springs, CO 80923
Aaron
Job Details: 12/22/2023
"Dent on RC door, removed and replaced door, no scratches or dents, verified by customer. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ0
Near Colorado Springs, CO 80924
Aaron
Job Details: 12/22/2023
"Heating element is shorted out, removed and replaced element, tested unit through diagnostics, installed litmus strip, working well now. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHB08
Near Cañon City, CO 81212
James
Job Details: 12/22/2023
found water filter release assem broken. cust declines housing repair. is ok with it as it is. collected 129.95 $136.45 CC Auth# K4Y3KR
We serviced a
GE DISHWASHER
Model PDT775SYN7FS
Near Silverthorne, CO 80498
Erik
Job Details: 12/22/2023
connect to smartHQ service:F56 inactive failure to drainF5 inactive inverter errorclear codes and test: GOOD* see quick picstemp blockage suspected in drain pump
We serviced a
SAMSUNG WASHER
Model WF50K7500AV/A2
Near Colorado Springs, CO 80906
Brandon
Job Details: 12/22/2023
"Part broken in half, need new one"
We serviced a
WHIRLPOOL DISHWASHER
Model WDF330PAHW4
Near Fountain, CO 80817
Carlos
Job Details: 12/22/2023
"Installed sump assembly and control board, ran test op all ok"
We serviced a
WHIRLPOOL OVEN
Model WGG745S0FS02
Near Colorado Springs, CO 80927
Aaron
Job Details: 12/22/2023
"Ignitor is shorted out, verified power, rest of unit is working well. Needs ignitor. Ignitor wpw10324738 $282.34Tax $23.15Supplies $14.50Hc $149.95Labor $229.95Total job $699.8930 day estimateNo return on parts Auth 149.95 hc #T9NN3W"
We serviced a
JENN-AIR COOKTOP
Model JIC4536XB00
Near Monument, CO 80132
Glenn
Job Details: 12/22/2023
"when selected a temp, unit will beep and then shut itself off.Unable to duplicate intermittent problem. Techline: Programmed unit to code 25. All OPS Test:OK , SR# 7738084463"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS555SIHZ06
Near Grand Junction, CO 81507
James R
Job Details: 12/22/2023
No water. Replaced valve ok. Checked icemaker found twist tray damaged. Replaced icemaker. Reassembled put icemaker thru test operating as should. Dispensing water as well no leaks. Put leak board under unit. Customer signed disclaimer. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
GE RANGE
Model JB625RK9SS
Near Breckenridge, CO 80424
Erik
Job Details: 12/22/2023
Install parts shipped to CX/ test: GOODburner control resumed on front right burnerJOB COMPLETE
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ11
Near Moriarty, NM 87035
Jason
Job Details: 12/22/2023
installed parts unit checks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ11
Near Albuquerque, NM 87111
Jason
Job Details: 12/22/2023
checked unit found there was air in the lines. ran some water through unit checks ok
We serviced a
MAYTAG WASHER
Model MVW7230HW1
Near Cañon City, CO 81212
James
Job Details: 12/22/2023
found strike snapped off causing unit to be inoperable. replaced strike tested unit all ops tested good. no pop ok per AR
We serviced a
SAMSUNG REFRIGERATOR
Model RF28NHEDBSR/AA
Near Colorado Springs, CO 80910
Brandon
Job Details: 12/22/2023
"Replaced compressor and vacuumed unit for 10 minutes, held vacuum for 10 minutes, charged unit r134a, compressor is removing heat, temps falling quickly, cx will monitor"
We serviced a
WHIRLPOOL DRYER
Model MEDB835DW4
Near Monument, CO 80132
Glenn
Job Details: 12/22/2023
"Bad Element & T-Stats, Also locked up Idler Pulley assy, as lots of Lint/Hair buildup insideIdler Pulley assy - W10837240 $68.01 (Would need to order) , Element - WP3387747 $99.68 , T-Stat Kit - 280148 $82.26 , Tax $20.50 , MPS $14.50 , Labor $219.95 , SC $149.95 , Declined Estimate, Paid SC Fee $149.95 + Tip $15.00 =$164.95 , Autho#E9333F"
We serviced a
WHIRLPOOL DRYER
Model MEDB880BW0
Near Colorado Springs, CO 80921
Glenn
Job Details: 12/22/2023
"Unit full of lint, Suggest replace following parts:Idler Pulley Assy - WPW10547292 $63.60 , Drive Belt - WPW10136934 $85 , Belt - Blower - WP8544742 $81.46 , Shaft (Front - RHT) WPW10359271 $84.77 X2 =$169.54 , Shaft (Rear - LHT) WPW10359272 $84.28 X2 = $168.56 , Support Roller - WPW10314173 $56.70 X4 =$226.80 , Tax $65.19 , MPS $14.50 , Labor $219.95 , SC $129.95 , Declined Estimate , Paid SC Fee of $129.95 , Cell used for payment, Autho# 9H44AJ"
We serviced a
AMANA WASHER
Model NTW4519JW2
Near Colorado Springs, CO 80911
Carlos
Job Details: 12/22/2023
"Installed control board, suspension and tub ring. Ran test op runs ok."
We serviced a
INSINKERATOR GARBAGE DISPOSAL
Model 79883A
Near Colorado Springs, CO 80919
Ralph
Job Details: 12/22/2023
installedpart and unit checked okay
We serviced a
MAYTAG WASHER
Model MVW4505MW0
Near Rio Rancho, NM 87124
Larry
Job Details: 12/22/2023
Installed controls and tested good - Unit is good to go
We serviced a
WHIRLPOOL DISHWASHER
Model WDF520PADM9
Near Rio Rancho, NM 87124
Larry
Job Details: 12/22/2023
CX complaint - Not cleaning dishes - Inspected unit and found the control and wash motor failed - Replaced bothe with pre-id oarts and tested good - Unit is good to go
We serviced a
WHIRLPOOL DISHWASHER
Model WDTA50SAKV2
Near Bernalillo, NM 87004
Larry
Job Details: 12/22/2023
Installed sump and tested good - Unit is good to go
We serviced a
MAYTAG REFRIGERATOR
Model MRT711SMFZ02
Near Albuquerque, NM 87102
Larry
Job Details: 12/22/2023
Installed shelf and tracks and tested good - Unit is good to go
We serviced a
WOLF STOVE
Model DF366
Near Colorado Springs, CO 80906
Jerimiah
Job Details: 12/22/2023
"Installed replacement cooling fan, unit check ok charged labor as quoted. $208.95 CC Auth# CCL3L9"
We serviced a
LG REFRIGERATOR
Model LFX31945ST/05
Near Pueblo, CO 81001
James
Job Details: 12/21/2023
found unit with no cooling. found compressor with 120vac and no response. homesmart does not cover sealed system repairs advised cust if they have repair and replace plan xcel will be contacting them in 24-48 hrs with next steps
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF507ESS01
Near Colorado Springs, CO 80921
Jessie
Job Details: 12/21/2023
"Added a bit more Refrigerant. Customer to monitor, no leak found with black light."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ08
Near Colorado Springs, CO 80920
Glenn
Job Details: 12/21/2023
"Install New Condensor Fan Motor & Blade, All OPS Test:OK"
We serviced a
SAMSUNG ELECTRIC OVEN
Model NV51K7770DG/AA
Near Peyton, CO 80831
Jerimiah
Job Details: 12/21/2023
"Installed replacement led panel, unit check ok"
We serviced a
GE DRYER
Model PTD60EBPR0DG
Near Pueblo, CO 81001
David
Job Details: 12/21/2023
Checked dryer Heat elements are coming onEverything working as it should Dryer working better when vent disconnected from wall.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX986SIHV00
Near Peyton, CO 80831
Aaron
Job Details: 12/21/2023
"Freezer LED module shorted out, FC door switch working well, replaced module and tested, working well now. Advised customer of 5 star survey."
We serviced a
MAYTAG DISHWASHER
Model MDB8959SKZ0
Near Peyton, CO 80831
Aaron
Job Details: 12/21/2023
"F9E1 drain errorF7E1 motor failureFAE2 wax motor electrical error codes upon arrival, tested unit through diagnostics, circulation motor is shorted out Motor sump assembly w11416363 $299.51Control w11410070 $277.34Tax $24.56Supplies $14.50Hc $129.95Labor $259.95Total job $728.47 for motor sump assembly, $1028.55 for motor sump assembly and control30 day estimate No return on partsAuth 129.95 hc #49P4H3"
We serviced a
SAMSUNG DRYER ELECTRIC
Model DVE45B6300C/A3
Near Colorado Springs, CO 80925
Roman
Job Details: 12/21/2023
"Removed the old terminal bill and installed new one with a new power cord. Put the dryer back and tested it, dryer heating up and working great."
We serviced a
MAYTAG DRYER
Model MDE9706AYW
Near Peyton, CO 80831
Aaron
Job Details: 12/21/2023
"Motor is unable to turn tub, belt is cracked in several spots, Needs motor, blower, and belt. Motor w10410997 $219.48Blower 33001790 $72.73Belt wp33002535 $67.55Total parts$359.76Tax $29.50Supplies $14.50Hc $129.95Labor $219.95Total job $753.6630 day estimateNo return on partsAuth 129.95 hc #944WKY"
We serviced a
WHIRLPOOL DISHWASHER
Model WDP560HAMZ0
Near Calhan, CO 80808
Aaron
Job Details: 12/21/2023
"Tested unit through diagnostics, 120v being sent to the element, element tests at 16.7 ohms, tested unit once more and heating well, verified by customer, recommend rinse aid and tips for best drying. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL WASHER
Model WFW90HEFC1
Near Monument, CO 80132
Glenn
Job Details: 12/21/2023
"door is locked /wont fill or drain/ motor runs/ control panel not responding , F03 E01 - WATER LEVEL SYSTEM ERROR , F05 E02 - DOOR LOCK ERROR , F00 E01 - LOAD DETECTED DURING THE WASHER CLEANING CYCLE ,F08 E01 - NO WATER DETECTED ENTERING WASHER OR WATER LEVEL SENSOR TRIP NOT DETECTED , Cleared Error codes, Diagnostics > Got to Test 8 > unable to advance or end diag test. Powered unit off, Unit now responding. Lots of vibration & shaking w/ no load inside, sounds like bearing is coming apart, as I can hear bearing when rotating basket. Unit will require new rear Tub, Seal & Basket, 2 man job, Possible Bad Main PCB, Door lock, UI and worn shocks besides. Declined Estimate, wants to buy new unit. 719 648 4201 , Paid SC Fee of $129.95, Autho# 9L3J99"
We serviced a
MAYTAG DRYER
Model MED7230HW3
Near Pueblo, CO 81001
David
Job Details: 12/21/2023
Replaced blower wheel and motor Tested and is running good
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ05
Near Pueblo, CO 81003
David
Job Details: 12/21/2023
Checked refrigerator Found return air from refrigerator to freezer Completely plugged off with foamRemoved foam and is cooling like it should
We serviced a
WHIRLPOOL WASHER
Model WTW5105HW3
Near Colorado Springs, CO 80925
Carlos
Job Details: 12/21/2023
"Installed, water valve ran test op all ok"
We serviced a
MAYTAG DRYER
Model MED5630HC2
Near Fountain, CO 80817
Carlos
Job Details: 12/21/2023
"Installed electrodes and moisture sensor. Ran test op all ok, Cx uses lots of dryer sheets, advised cx to cleaned moisture sensor with rubbing alcohol once a month to clean wax off electrodes."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS555SIHZ06
Near Colorado Springs, CO 80920
Jessie
Job Details: 12/21/2023
Replaced all listed parts. Unit is sealing better and ice and water work well . All ok
We serviced a
GENERAL ELECTRIC OVEN
Model JB645RK6SS
Near Pueblo, CO 81005
David
Job Details: 12/21/2023
"Replaced bake, broil, and control Tested and seems to be working good"
We serviced a
BOSCH MICROWAVE
Model HMC80251UC/01
Near Colorado Springs, CO 80908
Jessie
Job Details: 12/21/2023
Brought out tech manager. Agreed we have a install issue. Submitting paper work and pictures
We serviced a
MAYTAG DRYER
Model MED6630HW0
Near Colorado Springs, CO 80910
Carlos
Job Details: 12/21/2023
"Needs, a heater and cutoff cx will not repair. Cx paid sc $149.95 CC Auth# 3E993E"
We serviced a
KITCHENAID WALLOVEN
Model KOCE500ESS09
Near Colorado Springs, CO 80927
Aaron
Job Details: 12/21/2023
"Magnetron is arching in waveguide, discussed with techline and deemed non repairable. Advised customer of situation and survey. SR7738075604Contacted whirlpool warranty and discussed."
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKB1
Near Colorado Springs, CO 80909
Carlos
Job Details: 12/21/2023
Installed sump assembly ran test op all ok
We serviced a
WHIRLPOOL M/W OTR
Model WML55011HS07
Near Pueblo, CO 81005
James
Job Details: 12/21/2023
"installed transformer and diode from preorder, tested ops all ckok. mag and interlock ckok"
We serviced a
SUB ZERO ICEMAKER
Model UC-15IP
Near Colorado Springs, CO 80908
Jessie
Job Details: 12/21/2023
Replaced circ pump. Cleaned out spray nozzle. Pump is circulating water well. Watched a couple batches of ice to make sure it was forming correctly. All ops ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX986SIHV03
Near Granby, CO 80446
Antonio
Job Details: 12/21/2023
Installed new door unit tested and looks good
We serviced a
MAYTAG DRYER
Model MED7230HW1
Near Colorado Springs, CO 80922
Aaron
Job Details: 12/21/2023
"Dryer is not heating, heating element is shorted out, rest of unit is in good condition. Approved onsite. Removed and replaced element, cleared lint in unit, corrected vent hose, tested and heating well now. Element WP3387747 $99.68Tax $8.17Supplies $14.50Hc $149.95Labor $199.95Total job $472.25No return on parts Auth total due $472.25 #4A9M49"
We serviced a
MAYTAG WASHER
Model MVW7232HW1
Near Colorado Springs, CO 80908
Jessie
Job Details: 12/21/2023
Replaced acu. Ran cycle all.ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHZ05
Near Granby, CO 80446
Antonio
Job Details: 12/21/2023
Call whlp found frezzer thermistors wire cut and touching separated and used electronic tape there is not enough wire to replace thermistor whlp believe it will be fine Sr#7737704863
We serviced a
WHIRLPOOL DRYER
Model WED5605MC0
Near Tabernash, CO 80478
Antonio
Job Details: 12/21/2023
Found loose wire at terminal block tightened unit tested good
We serviced a
KITCHENAID DISHWASHER
Model KDTE334GPS0
Near Colorado Springs, CO 80919
Glenn
Job Details: 12/21/2023
"Install New Sump & Mortor Assy, All OPS Test:OK, No Leaks, Install Leak detector for safety."
We serviced a
JENN-AIR MICROWAVE
Model JMC6224HL0
Near Fraser, CO 80442
Antonio
Job Details: 12/21/2023
Installed new boards and harness unit tested good
We serviced a
BOSCH MICROWAVE
Model HMVP053U/03
Near Avon, CO 81620
Erik
Job Details: 12/21/2023
install grilleJOB COMPLETE
We serviced a
BOSCH RANGE
Model HDS8655U/04
Near Edwards, CO 81632
Erik
Job Details: 12/21/2023
install high alt kit/ test: DISPLAY RESETNeed to call BSH TAG: NO LONGER REPAIRABLE PER TECH SUPPORTHave CX call Bosch customer service:case # 41039573291-800-944-2904
We serviced a
BOSCH FRENCH DOOR REFR
Model B36CL80ENS/06
Near Manitou Springs, CO 80829
Ralph
Job Details: 12/21/2023
"replaced both parts and cycled unit, unit checked okay"
We serviced a
WHIRLPOOL RANGE
Model WFG535S0LS4
Near Albuquerque, NM 87123
Jason
Job Details: 12/21/2023
checked unit calibrated oven temp and adjusted surface burner simmer heights unit checks ok
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS01
Near Snowmass, CO 81654
James R
Job Details: 12/21/2023
Evac system. Completely remove interior of F.F. area to gain access to evaporator. Remove right door. Replaced F.F. evaporator reassembled. Replaced drier. Evac system . Recharge F.F. evaporator 1st then Frz evaporator. Customer paid $840.95 check cash $10.00 auth code 3ANWC9
We serviced a
MAYTAG REFRIGERATOR
Model MRFF5033PZ00
Near Fraser, CO 80442
Antonio
Job Details: 12/21/2023
Installed new valve and head unitvtested good
We serviced a
MAYTAG WASHER
Model MVW4505MW0
Near Albuquerque, NM 87105
Larry
Job Details: 12/21/2023
CX complaiint - Lid not locking - Inspected unit and found the strile failed in the latch - Replaced both with pre-id parts and tested good - Unit is good to go
We serviced a
MAYTAG WASHER
Model MVW7232HW1
Near Albuquerque, NM 87121
Larry
Job Details: 12/21/2023
CX complaint - Washer grinding - Inspected unit and found the gearcase failed - Replaced with pre-id parts and tested good - Unit is good to go
We serviced a
KITCHENAID DISHWASHER
Model KDTM404KPS1
Near Albuquerque, NM 87120
Larry
Job Details: 12/21/2023
Installed UI and tested good - Unit is good to go
We serviced a
WHIRLPOOL WALLOVEN
Model WOS52ES4MZ0
Near Albuquerque, NM 87111
Jason
Job Details: 12/21/2023
installed door glass unit checks ok
We serviced a
MAYTAG DISHWASHER
Model MDB8959SBS0
Near Cedar Crest, NM 87008
Jason
Job Details: 12/21/2023
"sr7738075833, ui has failed safety will be reaching out to cx with the next steps techline advised me to give cx an est. labor$206.10misc$17.50ui#WPW10475780$253.60tx$21.56total$498.76"
We serviced a
CAFE RANGE
Model CHS900P2MS1
Near Edwards, CO 81632
Erik
Job Details: 12/21/2023
install panel on siteJOB COMPLETE
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near Colorado Springs, CO 80923
Aaron
Job Details: 12/21/2023
"Water dispenser assembly secure, water hitting tub ring, corrected and tested, hot water hose is dripping as well. Advised customer of situation and survey."
We serviced a
BOSCH DISHWASHER
Model SHP78CM5N/22
Near Vail, CO 81657
Erik
Job Details: 12/21/2023
"NO ERROR CODES PRESENTrinse aid ligt 'ON' indicating rinse aid needs to be added to dispenser door *see quick picsowners manual states:'this dishwasher is designed to be used with rinse aid, which enhances drying results and shine' *see quick picsZeolite fan and heater test: PASS test 5:04 on tech sheethardness of water and age of plumbing or source water quality can also be a factor."
We serviced a
SAMSUNG REFRIGERATOR
Model RF28R7351SG/AA
Near Colorado Springs, CO 80919
Mathew
Job Details: 12/21/2023
Replaced icemaker parts. Test op all okay.
We serviced a
SAMSUNG REFRIGERATOR
Model RF28HDEDTSR/AA
Near Colorado Springs, CO 80915
Mathew
Job Details: 12/21/2023
Replaced icemaker parts. Test op all okay.
We serviced a
SAMSUNG REFRIGERATOR
Model RF29BB8600QLAA
Near Colorado Springs, CO 80911
Roman
Job Details: 12/21/2023
Both ice makers are working in the freezer section. Checked the temp in the flex zone and its reading around 43 degrees but had the drawer open so couldnt get an accurate reading. Recommended cx gets a temperature gage. Cx did not want ice maker and IM 2 replaced. Installed control board and made sure compressor and fans were on. Fridge working great.
We serviced a
THERMADOR BUILT-IN REFRIGE
Model T36IR905SP/06
Near Colorado Springs, CO 80904
Roman
Job Details: 12/21/2023
"Removed left and right side slide rails and installed new ones, tested the drawer and its sliding in and out better. Made sure fridge is working properly, fridge working great."
We serviced a
HAIER REFRIGERATOR
Model HRF15N3AGAS
Near Colorado Springs, CO 80903
Roman
Job Details: 12/21/2023
"Removed old thermistor and installed new one, made sure compressor and fans kicked in, fridge working great."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ08
Near Colorado Springs, CO 80915
Roman
Job Details: 12/21/2023
"Removed the old dispenser and installed new one, tested the water, ice dispenser and the touchpad. Fridge working great."
We serviced a
WHIRLPOOL RANGE
Model WFE535S0LZ3
Near Woodland Park, CO 80863
Ralph
Job Details: 12/21/2023
installed part and unit checked okay