Service History 547

We serviced a

SAMSUNG REFRIGERATOR

Model RF23M8070SR/AA

Near Colorado Springs, Colorado 80916

Jeremy

Job Details: 07/07/2023

Installed all new parts. Ran HASS. IM is working to the best of my knowledge. Asked CX to complete survey.

We serviced a

BOSCH DISHWASHER

Model SHP865WF5N/01

Near Colorado Springs, Colorado 80920

Jessie

Job Details: 07/07/2023

E:09 heater circuit open. Customer very Warned about bdPump#12008381 $189.60Tax$15.55Sc $149.95$14.50Labor $239.95Total $609.55No return on parts 30 days estimate

We serviced a

SAMSUNG REFRIGERATOR

Model RF28R6241SR/AA

Near Colorado Springs, Colorado 80908

Brandon

Job Details: 07/07/2023

"Unit had 39c error, replaced ice maker, bin, pcb tested op all ok hass passed"

We serviced a

SAMSUNG MICROWAVE

Model MS19M8020TG/AA

Near Colorado Springs, Colorado 80915

Jeremy

Job Details: 07/07/2023

Microwave has physical damage bottom right front. This damage caused microwave to not sit level. I contacted tech support and was told it was not covered by warranty and CX would need to contact Samsung and let them know it was shipping damage.

We serviced a

SAMSUNG MICROWAVE

Model MC17T8000CS/AA

Near Colorado Springs, Colorado 80922

Brandon

Job Details: 07/07/2023

Replaced grille and tested op all ok

We serviced a

SAMSUNG DRYER

Model DV42H5200EP/A3

Near Colorado Springs, Colorado 80923

Jeremy

Job Details: 07/07/2023

CX still getting Over Heater Error. Upon arrival checked lint trap and had excess lint (see pic).Educated CX the importance of cleaning lint trap. Getting good airflow through vent. Thermistor tested good. CX just informed me that unit will add time when cycle is supposed to be comlete and then error code appears. I cleaned moisture sensors with rubbing alcohol. I educated CX and explained how sensors work. I also told CX if problem continues to try using timed cycle to bypass sensor.

We serviced a

SAMSUNG REFRIGERATOR

Model RF22R7551SG/AA

Near Colorado Springs, Colorado 80919

Jonny

Job Details: 07/07/2023

"Installed parts, hass passed, gave custy fridge education"

We serviced a

SAMSUNG RANGE - ELECTRIC

Model NE59N6630SG/AA

Near Colorado Springs, Colorado 80919

Jonny

Job Details: 07/07/2023

"Installed led, not the correct pcb but display is perfect so maybe didn't need pcb"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF555SDFZ15

Near Colorado Springs, Colorado 80905

Ralph

Job Details: 07/07/2023

installed listed parts aand unit checkeed okay

We serviced a

MAYTAG DRYER - ELECTRIC

Model MEDB855DC4

Near Colorado Springs, Colorado 80921

Amos

Job Details: 07/07/2023

Ran test opp on unit no codes. Replaced listed parts on unit dryer is drying up perfectly fine customer is satisfied. As I put the unit back together the motor blower is making a loud noise took unit apart to make sure everything was fine and it was told customer to monitor.

We serviced a

MAYTAG DRYER

Model MED7230HC1

Near Colorado Springs, Colorado 80927

Amos

Job Details: 07/07/2023

Ran test opp on unit no codes. Replaced listed parts on unit customer is happy told customer they need to change there air duck hose to a metal duct.

We serviced a

MAYTAG WASHER

Model MVWB765FW3

Near Colorado Springs, Colorado 80922

Amos

Job Details: 07/07/2023

Ran test opp on unit no codes. Replaced all listed parts on unit drain pump kicks on works great.

We serviced a

WHIRLPOOL DISHWASHER

Model WDT750SAKZ0

Near Peyton, Colorado 80831

Aaron

Job Details: 07/07/2023

"Removed and replaced console and housing, tested unit and working well now. Advised customer of 5 star survey."

We serviced a

GE REFRIGERATOR/TOP

Model GSS25IYNXHFS

Near Silverthorne, Colorado 80498

Erik

Job Details: 07/07/2023

install fan and test:NOISE NORMALJOB COMPLETE

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRQA59CNKZ

Near Monument, Colorado 80132

Glenn

Job Details: 07/07/2023

Install & Adjust New Door Gasket. All OPS Test:OK

We serviced a

AMANA WASHER

Model NTW4519JW2

Near Colorado Springs, Colorado 80911

Amos

Job Details: 07/07/2023

Ran test opp on unit. Replaced all listed parts on unit. Ran a cycle unit runs great.

We serviced a

SAMSUNG WALL OVEN ELECTR

Model NV51K6650SS/AA 00

Near Colorado Springs, Colorado 80919

Jeremy

Job Details: 07/07/2023

Getting C-A2 error code. Need to replace cooling fan. Service Charge $129.95 Part $271.78 Labor $319.95 M&P $14.50 Tax $22.29 Total $758.47 CX is going to talk to spouse about proceeding repair Service Charge $129.95 Auth: 9344XL

We serviced a

SUB ZERO REFRIGERATOR

Model 532SS

Near Monument, Colorado 80132

Jessie

Job Details: 07/07/2023

Charged unit with nitrogen. Found leak at solder connection cap and evap. Corrected issue. Charged with nitrogen again and geld pressure. Ran a sweep charge. Watched frost pattern. All ok

We serviced a

KITCHENAID DISHWASHER

Model KDTE204KPS1

Near Colorado Springs, Colorado 80907

Carlos

Job Details: 07/07/2023

Installed listed parts runs all ok

We serviced a

KITCHENAID DISHWASHER

Model KDTM404KPS1

Near Rio Rancho, New Mexico 87124

Larry

Job Details: 07/07/2023

Installed parts listed and tested good - Unit is good to go

We serviced a

SAMSUNG REFRIGERATOR

Model RF28R7201SR

Near Pueblo, Colorado 81008

Jonny

Job Details: 07/07/2023

"Installed parts, unit is running Like it should now"

We serviced a

SAMSUNG DRYER

Model DVE55M9600W/A3

Near Monument, Colorado 80132

Jonny

Job Details: 07/07/2023

"Diagnosed unit and heater coils were bad, ordered him a new heater assy, 2 days later called back no heat, there was heat when I left and wife was happy with repair, I co,e back and a thermistor and tc1 was bad , unit wasn't drying again, repaled the 2 parts and was receiving heat again before I left, husband confirmed it. Calls back a week and 1 day later, unit is broken again. Told cx they should get his vent ducts cleaned or has a bad unit but he is out of his samsung warranty. Custy could have a bad unit, we have replaced all that we can that could cause this issue more than once and there is really nothing more that we can do for the unit for a heating issue ."

We serviced a

SAMSUNG REFRIGERATOR

Model RF23HCEDBSR/AA

Near Colorado Springs, Colorado 80924

Brandon

Job Details: 07/07/2023

"Unit had 39c error, replaced all Ice maker parts and sealed ice room, tested op all ok hass passed"

We serviced a

SAMSUNG REFRIGERATOR

Model RF28K9070SR/A

Near Colorado Springs, Colorado 80918

Jonny

Job Details: 07/06/2023

"Hass failed, cv,ff,condenser fans worked, put in forced mode and half frost pattern sealed system issue, custy will look for receipt Autho#ay9m44"

We serviced a

KITCHENAID MICROWAVE

Model KBHC109JSS05

Near Colorado Springs, Colorado 80904

Carlos

Job Details: 07/06/2023

Installed listed parts all ok. CX paid labor $189.95 CC Auth# 434HC9

We serviced a

WHIRLPOOL WASHER

Model MVW7232HW0

Near Palmer Lake, Colorado 80133

Glenn

Job Details: 07/06/2023

"Found Motor bolt almost all the way out & unit has broken kid strike. Applied locktite to bolt threads, tighten down motor bolt. Install New Lid Strike, All OPS Test:OK"

We serviced a

JENNAIR WALLOVEN

Model JMW2430IL03

Near Monument, Colorado 80132

Glenn

Job Details: 07/06/2023

"Door switches are tempermental. Sometimes they work, sometimes not. Suggest customer always use center of door handle (To avoid tweaking door) and give it a good close. (Otherwise, door switches may not get activated.) Adjust switches & door. All OPS Test:OK"

We serviced a

MAYTAG DRYER

Model MED5630HW2

Near Granby, Colorado 80446

Antonio

Job Details: 07/06/2023

found loose connection at power block tightened unit tested good

We serviced a

MAYTAG WASHER

Model MHW5630HW3

Near Carbondale, Colorado 81623

James R

Job Details: 07/06/2023

"Replaced water level switch, both cold and hot water valves. Test operation in service Had a F8E1 code cleared. diagnostics test op's good no error codes when finished. Customer signed waivers. Put water board under unit. Please fill out whirlpool tech satisfaction survey. Thank You."

We serviced a

KITCHENAID DISHWASHER

Model KUDS02FRSS1

Near Colorado Springs, Colorado 80904

Carlos

Job Details: 07/06/2023

Installed listed parts all ok. Cx paid labor $189.95 CC Auth# X3H394

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS571CIHZ01

Near Belen, New Mexico 87002

Larry

Job Details: 07/06/2023

CX complaint - Fridge making loud noise - Inspected unit and found debris in condenser fan - Removed debris and tested good - Unit is good to go

We serviced a

WHIRLPOOL WASHER

Model WTW4855HW3

Near Los Lunas, New Mexico 87031

Larry

Job Details: 07/06/2023

CX complaint - Washer shakes violently - Inspected unit and foundthe basket loose - Secured spanner nut and tested good - Unit is good to go

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS325SDHB08

Near Rio Rancho, New Mexico 87144

Larry

Job Details: 07/06/2023

Installed switch and tested good - Unit is good to go

We serviced a

THERMADOR REFRIGERATOR

Model T36BT820NS/62

Near Colorado Springs, Colorado 80908

Jessie

Job Details: 07/06/2023

"Replaced evap, compressor and Drier to refeig. Unit is cooling at 20 and 130. All ok"

We serviced a

BOSCH DISHWASHER

Model SHXM78Z55N/20

Near Monument, Colorado 80132

Jessie

Job Details: 07/06/2023

Unit door not closing properly. Made adjustments. Unit missing install parts. This is something not covered under warranty

We serviced a

ZEPHYR BEVERAGE CENTER

Model PRPB24C01AG

Near Colorado Springs, Colorado 80923

Jessie

Job Details: 07/06/2023

Replaced fan on the evap refrig area. All ok

We serviced a

WOLF RANGE

Model DF484CG

Near Colorado Springs, Colorado 80908

Kris

Job Details: 07/06/2023

calibrated oven. 370-328 376-359 heat patterns 2 or 3 simple degreaser take out racks self clean will do 80 percent mr clean

We serviced a

WHIRLPOOL RESIDENTIAL REFR

Model WRF767SDHZ03

Near Peyton, Colorado 80831

Kris

Job Details: 07/06/2023

removed old compressor installed new ran test op all ok unit is working to spec at this time.

We serviced a

THERMADOR RANGE

Model NLA

Near Aspen, Colorado 81611

Erik

Job Details: 07/06/2023

We serviced a

GE REFRIGERATOR

Model GWE19JYLFFFS

Near Winter Park, Colorado 80482

Erik

Job Details: 07/06/2023

gasket installed - expect defrost in the next 96 hrs temps to spikeJOB COMPLETE

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS325SDHZ08

Near Carbondale, Colorado 81623

James R

Job Details: 07/06/2023

Swapped door handles and adjusted R.H. down down handles are even.

We serviced a

MAYTAG WASHER

Model MVW5430MW0

Near Colorado Springs, Colorado 80909

Mathew

Job Details: 07/06/2023

"Replaced all four suspension rods. Test op, unit working as expected with 6 towels in test cycle."

We serviced a

WHIRLPOOL WASHER

Model WFW87HEDW0

Near Colorado Springs, Colorado 80918

Glenn

Job Details: 07/06/2023

"Unit was already taken apart at rear cover upon 1st arrival. Install New Drain Pump Assy, All OPS Test:OK, Re-installed Back cover and braces."

We serviced a

AMANA REFRIGERATOR

Model BC21VW

Near Colorado Springs, Colorado 80919

Glenn

Job Details: 07/06/2023

"Unit stopped cooling over July 4th. Customer since unplugged unit. Found front condensor coil & rear vent plugged with Lint. Had customer clean lint. Plugged unit in, and the FRZR Evap is showing a good frost pattern.Possible Evap Fan Motor, as it is very loud when running. Customer thinks it is normally that loud? Unit is so old that parts not even listed on Service Matters.Confirmed with Techline, he doesn't even show a listing, as this unit was made before Amana was even purchased by WP. SR# 7736797596 , Customer will let unit run and see how things go. May prefer to purchase a new unit. Paid SC Fee of $129.95, Autho# V9M34M"

We serviced a

WHIRLPOOL DISHWASHER

Model GU980SCGS2

Near Colorado Springs, Colorado 80904

Carlos

Job Details: 07/06/2023

"Needs an inner door. Part is discontinued, no repair (8051462)"

We serviced a

SAMSUNG REFRIGERATOR

Model RF23R6201SR/AA

Near Colorado Springs, Colorado 80925

Brandon

Job Details: 07/06/2023

Cx canceled

We serviced a

SAMSUNG DISHWASHER

Model DW80R5061US/AA

Near Colorado Springs, Colorado 80925

Brandon

Job Details: 07/06/2023

Cx said it was fixed already.

We serviced a

SAMSUNG REFRIGERATOR

Model RF28HDEDTSR/AA

Near Colorado Springs, Colorado 80925

Brandon

Job Details: 07/06/2023

"Replaced EVAP cover and checked errors again, only 40 e ice auger fan frozen cx doesn't want to fix tested op all ok Collected labor $189.95 Auth# 3C9TT9"

We serviced a

SAMSUNG DISHWASHER

Model DW80R2031US/AA

Near Colorado Springs, Colorado 80925

Brandon

Job Details: 07/06/2023

Replaced pcb and pump and tested op all ok

We serviced a

WHIRLPOOL WALLOVEN

Model WOS31ES0JS01

Near Fraser, Colorado 80442

Antonio

Job Details: 07/06/2023

installed new tod and thermal unit tested good

We serviced a

SAMSUNG REFRIGERATOR

Model RF260BEAEWW/AA

Near Pueblo, Colorado 81005

Jeremy

Job Details: 07/06/2023

CX has noise complaint. Evap coil frozen over. Need to replace evap cover. Part $264.91 Labor $275.95 M&P $14.50 Tax $21.72 CX denied repair. Service Charge $129.95 Auth:33u4ru

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF555SDFZ11

Near Colorado Springs, Colorado 80910

Brandon

Job Details: 07/06/2023

Replaced ice bin and tested op all ok

We serviced a

CAFE REFRIGERATOR/TOP

Model CVE28DP2NBS1

Near Granby, Colorado 80446

Erik

Job Details: 07/06/2023

install partsconnect to smartHQ service:NO FAN NOISEJOB COMPLETE

We serviced a

MAYTAG DRYER

Model MED5500FW0

Near Colorado Springs, Colorado 80906

Carlos

Job Details: 07/06/2023

"Installed listed parts, ran test op. All ok"

We serviced a

WHIRLPOOL WASHER

Model WTW5057LW0

Near Colorado Springs, Colorado 80910

Carlos

Job Details: 07/06/2023

Installed listed parts ran test op. all ok. Left leak strip.

We serviced a

MAYTAG DRYER

Model MED6230HW0

Near Colorado Springs, Colorado 80907

Amos

Job Details: 07/06/2023

Ran test opp no codes. Replaced all listed parts on unit dryer is drying great.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS315SDHZ08

Near Colorado Springs, Colorado 80918

Amos

Job Details: 07/06/2023

Rant test opp on unit with the new ice maker module. Replaced all listed parts on unit customer should have ice in the next 24hrs.

We serviced a

KITCHENAID RANGE

Model KSIB900ESS2

Near Winter Park, Colorado 80482

Antonio

Job Details: 07/06/2023

installed new control unit tested good sc$149.00lb$189.95total$338.95AUTH#N9ALRX

We serviced a

SAMSUNG DRYER

Model DV45H6300EG/A3

Near Colorado Springs, Colorado 80909

Jeremy

Job Details: 07/06/2023

Replaced pulley. Squeak is gone. Additional Labor $20.00 Part $97.56 M&P $14.50 Tax $8.00 Total $140.06 Auth:FC9FU3

We serviced a

MAYTAG WASHER

Model MVW6230RHW2

Near Colorado Springs, Colorado 80924

Amos

Job Details: 07/06/2023

Ran test opp no codes. My bucket head vacuum gave out took longer then it should job got done. Replaced all listed parts on unit customer is satisfied.

We serviced a

SAMSUNG REFRIGERATOR

Model RF23M8070SR/AA

Near Colorado Springs, Colorado 80924

Jonny

Job Details: 07/06/2023

"Hass passed, installed parts, gave custy fridge education"

We serviced a

WHIRLPOOL WASHER

Model WTW6120HW0

Near Trinidad, Colorado 81082

James

Job Details: 07/06/2023

"installed all parts on ticket, tested and recalibrated unit. tested ops all ckok. left litmus"

We serviced a

JENNAIR REFRIGERATOR

Model JFFCF72DKL04

Near Colorado Springs, Colorado 80908

Aaron

Job Details: 07/06/2023

"Door not fully sealing on right side, heated gasket and corrected, lifted front legs for unit so the door pulls in better, advised customer. Working well now. Advised of survey."

We serviced a

KENMORE REFRIGERATOR

Model 111.7304561

Near Pueblo, Colorado 81001

James

Job Details: 07/06/2023

found unit needing defrost sensor for ice buildup on fridge evap. needs defrost sensor 60148-0003400-01 and evap fan 3015924900 (emcompass). xcel doesn't cover evap fan cust is upset and is going to call xcel to fight it

We serviced a

WHIRLPOOL WASHER

Model WTW4816FW3

Near Fruita, Colorado 81521

James R

Job Details: 07/06/2023

Replaced basket and suspension. Operation ok.

We serviced a

FRIGIDAIRE REFRIGERATOR

Model FGHS2631PF

Near Colorado Springs, Colorado 80922

Kris

Job Details: 07/06/2023

fc temp@23.6 rc temp@38.9 unit has frost pattern at top of evap compressor is pulling 0.3 amps cx does not want to repair.

We serviced a

GENERAL ELECTRIC STOVE

Model PHB920SJ8SS

Near Pueblo West, Colorado 81007

James

Job Details: 07/05/2023

Installed ordered parts tested operations all check OK advice cadvise customer on potential power limitations of running all 4 burners on high customer understood

We serviced a

SAMSUNG WASHER

Model WF45B6300AC

Near Colorado Springs, Colorado 80911

Jonny

Job Details: 07/05/2023

"Filter was loose, tightened it, that was making the noise,hass passed"

We serviced a

SAMSUNG REFRIGERATOR

Model RF28K9580SR/AA

Near Colorado Springs, Colorado 80925

Brandon

Job Details: 07/05/2023

"Replaced auger assy, unit says making ice now, tested op all ok"

We serviced a

KITCHENAID DISHWASHER

Model KDTM404KPS1

Near Albuquerque, New Mexico 87120

Jason

Job Details: 07/05/2023

installed part also found a connector for float had loose connection re seated plug unit checks ok

We serviced a

WHIRLPOOL DRYER

Model WED4815EW1

Near Pueblo West, Colorado 81007

James

Job Details: 07/05/2023

found loose wire at timer causing issues. secured and tested all ops test good.

We serviced a

KITCHENAID ICE MACHINE

Model KUIX305ESS2

Near Pueblo West, Colorado 81007

James

Job Details: 07/05/2023

installed ordered parts tested operations all check OK. unit started cooling and water is running. left litmus (see sd pics)

We serviced a

MAYTAG DRYER

Model MEDC215EW0

Near Rio Rancho, New Mexico 87124

Jason

Job Details: 07/05/2023

checked unit found rollers and idler are wornSC$141LABOR$206.10MISC$17.50REPAIR KIT#4392065$71.75TX$6.10TOTAL$442.45Auth code:K343M4$442.45; used 1 4392065 (REPAIR KIT) from stock

We serviced a

SAMSUNG DRYER

Model DVE50R5400V/A3

Near Colorado Springs, Colorado 80911

Jeremy

Job Details: 07/05/2023

Cx smelled burning small and grinding noise. Took unit apart and found excess lint on blower that possibly made blower unbalanced. I also checked out heating element for possible lint or debris. Removed lint from blower. Tested op. Sounds good. Ran HASS. Asked CX to complete the survey.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRT311FZDM02

Near Los Lunas, New Mexico 87031

Larry

Job Details: 07/05/2023

CX complaint - Too warm in FC - Inspected unit and found temps in RC at ~34 degrees and 0 in freezer - Could not duplicate issue - Unit is operating as designed

We serviced a

JENNAIR WALLOVEN

Model JJW2430DS03

Near Rio Rancho, New Mexico 87124

Jason

Job Details: 07/05/2023

INSTALLED CONSOLE UNIT CHECKS OK

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF535SWHZ07

Near Rio Rancho, New Mexico 87144

Jason

Job Details: 07/05/2023

sealed liner to cabinet gaps unit checks ok

We serviced a

KITCHENAID REFRIGERATOR

Model KRMF706ESS01

Near Colorado Springs, Colorado 80921

Jessie

Job Details: 07/05/2023

"Unit all refrig is set for 37 and is 37. Freezer set for 0 and is 22. All fans working. Unit pulling 1.0 amps. Pulled covers to evaps and back panel looked for any dye from uv Drier I installed. No dye found. Pressures are 0 and 120. Got on phone with techline, spoke with robert. Went over a lot of checks. Ran test 4. Robert would like me to unplug unit and reset. Customer to monitor. Sr#7736778755"

We serviced a

WOLF OVEN

Model SO3050TE/S/P

Near Larkspur, Colorado 80118

Jessie

Job Details: 07/05/2023

Unit came up with a 5320 error code in middle of self clean. Mcb ambient exceeds temp. Verified blower operation. Blower ranging 2900-3000 rpms. Cleared error code and ran self test. No errors found

We serviced a

THERMADOR DISHWASHER

Model DWHD770WFP/01

Near Larkspur, Colorado 80118

Jessie

Job Details: 07/05/2023

Replaced fan. Test op all ok

We serviced a

JENNAIR MICROWAVE OVEN

Model JMW3430IL03

Near Colorado Springs, Colorado 80921

Glenn

Job Details: 07/05/2023

Install New UI Console. Tighten Handle. All OPS Test:OK

We serviced a

SUB ZERO REFRIGERATOR

Model 532SS

Near Monument, Colorado 80132

Jessie

Job Details: 07/05/2023

Replaced both freezer and refrog gasket. Replaced Drier and evap to refrig. Charged unit 9.5 ounces 134a and monitored. All ok

We serviced a

KITCHENAID DISHWASHER

Model KDTM404KBS1

Near Monument, Colorado 80132

Glenn

Job Details: 07/05/2023

"Reports intermittent water leaking under unit into float tray. Verified all connections to Valve & Hoses are tight. Reseat connections to PCB. All OPS Test:OK, No Leaks. Possible Loading issue."

We serviced a

KITCHENAID DISHWASHER

Model KDTE104KPS1

Near Colorado Springs, Colorado 80922

Aaron

Job Details: 07/05/2023

"Heating element shorted out, replaced element and thermostat, tested unit through diagnostics and verified power to the element. Working well now. Advised customer of 5 star survey."

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS325SDHZ08

Near Colorado Springs, Colorado 80924

Aaron

Job Details: 07/05/2023

"Ice is intermittently producing, correct power to the ice maker and was able to get the unit into harvest cycle, valve is working well. If problem persists would need new ice maker. Ice maker assembly W11546935 $170.86Tax $14.01Supplies $14.50Hc $129.95Labor $189.95Total job $519.2730 day estimate No return on parts Auth 129.95 hc#572726"

We serviced a

JENNAIR DISHWASHER

Model JDPSS244LL2

Near Colorado Springs, Colorado 80924

Glenn

Job Details: 07/05/2023

"Install New Door Panel. Swap parts from old door.All OPS Test:OK. Customer wasn't home, but was able to remotely unlock door and let me into house to complete repair. Called customer once completed to allow remote locking of front door."

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF767SDHZ00

Near Colorado Springs, Colorado 80920

Glenn

Job Details: 07/05/2023

"Install New Ceiling LED Modules. All OPS Test:OKVerified w/ office, call covered under warranty, no need to collect SC fee, as per Rick & Tabitha."

We serviced a

WHIRLPOOL REFRIGERATOR

Model ED5PVEXWS06

Near Colorado Springs, Colorado 80920

Glenn

Job Details: 07/05/2023

"Water side of dispenser is broken and not working.Found White plastic mounting bracket for Switch assy broken. P/N: WP2180226 $54.46 , Spacer, Switch - 625834 - NLA (DISCONTINUED) , Decline further estimate, Paid SC Fee of $129.95 + Tip $6.50 = $136.45 , Autho# L49H33"

We serviced a

WHIRLPOOL DISHWASHER

Model WDT710PAHB1

Near Colorado Springs, Colorado 80920

Glenn

Job Details: 07/05/2023

Unit not draining. Reseat connections to PCB & Drain Pump. All OPS Test:OK

We serviced a

GE REFRIGERATOR

Model PSS26MSWCSS

Near Woodland Park, Colorado 80863

Ralph

Job Details: 07/05/2023

cust to order parts then call for repair...cust paying mileage and sc today autho no. ELM4KR

We serviced a

WHIRLPOOL DRYER

Model WED560LHW2

Near Colorado Springs, Colorado 80903

Carlos

Job Details: 07/05/2023

Installed hose and repair kit. All ok

We serviced a

KITCHENAID DISHWASHER

Model KDTM404ESS3

Near Colorado Springs, Colorado 80908

Aaron

Job Details: 07/05/2023

"Dishwasher is tripping breaker, verified power at the justin box and secured fittings, upon inspection found two wires in the door that are worn and shorting at the door panel, corrected and tested unit, working well now. Auth 129.95 hc #9HE339"

We serviced a

WHIRLPOOL DISHWASHER

Model WDF550SAHS

Near Colorado Springs, Colorado 80919

Glenn

Job Details: 07/05/2023

"Unit is an ADA model, and the inlet valve is not the usual standard valve. It requires a Male to Male Style Elbow, which according to the installation manual, is an optional part (Not Included) Spoke to Techline: They indicated that they have no part number, or any info related to size needed. At this point, it appears Home Depot will need to determine correct plumbing elbow, and will need to complete install which customer already paid for.SR# 7736787160 I did tighten loose door handle for customer."

We serviced a

MAYTAG DRYER

Model MED7230HW3

Near Elbert, Colorado 80106

Aaron

Job Details: 07/05/2023

"Thermal fuse shorted out, replaced and tested unit, heating well and has good push. Advised customer of 5 star survey."

We serviced a

SAMSUNG MICROWAVE

Model ME17R7021ES/AA

Near Colorado Springs, Colorado 80925

Brandon

Job Details: 07/05/2023

Replaced door and latch and tested op all ok

We serviced a

SAMSUNG REFRIGERATOR

Model RF28K9380SG/AA

Near Colorado Springs, Colorado 80906

Brandon

Job Details: 07/05/2023

"Replaced ice maker, pcb, tray and drain tube, reset ice maker, sealed ice room hass passed"

We serviced a

SAMSUNG REFRIGERATOR

Model RF28HDEDBSR/AA

Near Manitou Springs, Colorado 80829

Brandon

Job Details: 07/05/2023

"Unit has no errors, Ice maker is off because water is off to unit because case filter assy needs to be replaced which is not covered under the warranty. Informed son of situation called cx to update but no answer Remaining balance due for repair $574.03Case assy $262.09Labor $275.95Mps $14.50Tax $21.49"

We serviced a

SAMSUNG WASHER

Model WF45H6300AG/A2

Near Colorado Springs, Colorado 80922

Jonny

Job Details: 07/05/2023

"Installed parts, this call kicked my ass"

We serviced a

GE DISHWASHER

Model GDT665SMN0ES

Near Fountain, Colorado 80817

Jeremy

Job Details: 07/05/2023

Unit not proceeding through cycle. Found that pressure switch on sump clogged unit keeps draining. Cleaned pressure switch and unit is now working correctly. Placed leak detection strip under unit. CX had to leave so I sent bill over via text. Service Charge $129.95 Auth:

We serviced a

MAYTAG WASHER

Model MVWC565FW3

Near Basalt, Colorado 81621

James R

Job Details: 07/05/2023

F0E5 only code off balanced load detected. The only code. Cleared code and Put thru a calibration ok. Automatic test checked just fine no codes when done. Inspected under unit everything looks good. Unit is sitting on a rug and so its feet have collapsed the rug. Unit will not be very stable on the rug. Should be placed on a solid floor. Raised unit up at least an inch to make sure basket is not touching the floor when loaded with cloths. In drain and spin no load unit is operating as should. Customer needs to be aware of making sure the load is balanced. Put a leak board under unit. Had customer sign waivers.

Our Service

Our Company