Service History 563

We serviced a

KITCHENAID DISHWASHER

Model KDTM404KPS1

Near Colorado Springs, Colorado 80908

Aaron

Job Details: 03/30/2023

"Drain pump shorted out, replaced and tested unit, draining well and no leaks. Advised of 5 star survey"

We serviced a

GENERAL ELECTRIC WASHER

Model GTW720BSN0WS

Near Pueblo West, Colorado 81007

James

Job Details: 03/30/2023

"Arrived and found washer severely damaged from suspension rod breaking while unit was spinning at high speed. Sever damage to outer chassis, tub, splash ring, lid & suspension rods. Called ge tech and got a case number of 09834474. Sent GE pictures of unit damage as well as wall damage. See quick pics advised cust to call customer relations in 24hrs"

We serviced a

MAYTAG WASHER

Model MVWX655DW1

Near Albuquerque, New Mexico 87108

Larry

Job Details: 03/30/2023

CX complaint - Dryer wont run keeps making humming noise - Inspected unit and found it in a water hazard state and the drain pump keeps running - Reset control and recalibrated - Unit is operating as designed

We serviced a

WHIRLPOOL WASHER

Model WTW5010LW0

Near Basalt, Colorado 81621

James R

Job Details: 03/30/2023

"replaced belt,drive pulley and shield. test cycle good. Please fill out whirlpool tech satisfaction survey. Thank You."

We serviced a

WHIRLPOOL M/W OTR

Model WMH32519HW2

Near Albuquerque, New Mexico 87109

Larry

Job Details: 03/30/2023

CX Complaint - MW light stays on - Inspected unit and found the light relay is stuck closed - Unit needs a new control - CX doesn't want bear the cost of repair and will replace - Collected $140.18-Auth-YFL9LETrip- $129.95Control - $206.50Labor - $149.95Tax - $38.32Total - $524.96

We serviced a

WHIRLPOOL WASHER

Model MVW6200KW2

Near Fountain, Colorado 80817

Ken

Job Details: 03/30/2023

Installed cap and tested. Machine is spinning and agitating properly

We serviced a

MAYTAG DRYER

Model MEDC465HW0

Near Colorado Springs, Colorado 80915

Carlos

Job Details: 03/30/2023

Test opp found bad element . Installed listed parts.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS325SDHZ08

Near Colorado Springs, Colorado 80924

Aaron

Job Details: 03/30/2023

"Left foam insulation used to support front condenser worn away from vibration, condenser coil vibrating along the frame of the unit, corrected and cleaned condenser, operating well now. Advised of 5 star survey"

We serviced a

WHIRLPOOL WASHER

Model WTW8127LC0

Near Colorado Springs, Colorado 80925

Carlos

Job Details: 03/30/2023

Customer has a warranty from assurant and will send a new work order

We serviced a

WHIRLPOOL WALLOVEN

Model WOC54EC0HS20

Near Colorado Springs, Colorado 80924

Aaron

Job Details: 03/30/2023

"Control panel not responding correctly. Replaced assembly and customer tested, working well now. Advised of 5 star survey"

We serviced a

KITCHENAID REFRIGERATOR

Model KRMF706ESS05

Near New Castle, Colorado 81647

James R

Job Details: 03/30/2023

Replaced dual water valve and Ice Box fan. Test op's water dispense and ice maker water fill. Op's good. Test op's of ice box fan op's good. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

WHIRLPOOL WASHER

Model MHW6630HW0

Near Silt, Colorado 81652

James R

Job Details: 03/30/2023

Put into diagnostics F0E2 over sudsF5E2 lock failure. Lock does seem to work.F0E5 off balanced loadcleared all codes activated test 12 unit will not agitate or spin. Door does lock and unlock.checked harness at ACU to motor 15.2 ohms across all of the windings. So the motor is good. ACU is faulty. W11322883 total estimate to repair. $626.78 customer paid service call $149.00 auth code HU4X99

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRX735SDHZ

Near Fountain, Colorado 80817

Carlos

Job Details: 03/30/2023

"Test op. Ran diagnosis in dispenser, water valves and ice maker. Found debris in dispenser button. All works OK."

We serviced a

KITCHENAID DISHWASHER

Model KDTE234GPS0

Near Colorado Springs, Colorado 80921

Glenn

Job Details: 03/30/2023

"Customer didnt realize DW door was open and walked into door, causing mis-alignment.Right side skipped a peg and door needs to be corrected at hinge. Corrected door hinge alignment. All OPS Test:OK, Paid SC Fee & LAbor, Total 199.90, Autho#9C33LX"

We serviced a

MAYTAG WASHER

Model MHW5630HC3

Near Albuquerque, New Mexico 87109

Larry

Job Details: 03/30/2023

Installed parts lsited and tested good - Unit is good to go

We serviced a

MAYTAG DRYER

Model MEDC465HW0

Near Albuquerque, New Mexico 87109

Larry

Job Details: 03/30/2023

Installed parts listed and tested good - Unit is good to go

We serviced a

SAMSUNG WASHER

Model WF45R6100AC/US

Near Colorado Springs, Colorado 80924

Jonny

Job Details: 03/30/2023

"7005456896, saw counter weight broken and called techline for 7000 number, custy will be getting new unit bcuz this one is unrepairable"

We serviced a

WHIRLPOOL COOKTOP

Model WCG55US6HS00

Near Elbert, Colorado 80106

Glenn

Job Details: 03/30/2023

"Install New Manifold Assy & Switch Harness.All OPS Test:OK, No Gas Leaks."

We serviced a

MAYTAG RANGE

Model MER7700LZ0

Near Fraser, Colorado 80442

Antonio

Job Details: 03/30/2023

installed new element and fuse

We serviced a

SAMSUNG REFRIGERATOR

Model RF28K9380SR/AA

Near Colorado Springs, Colorado 80921

Jonny

Job Details: 03/30/2023

"Installed partsn, hass passed, unit will have ice in 24 hiurs"

We serviced a

WHIRLPOOL WASHER

Model WTW4816FW2

Near Albuquerque, New Mexico 87113

Larry

Job Details: 03/30/2023

Installed spin basket and tested good - Unit is good to go

We serviced a

JENNAIR REFRIGERATOR

Model JS48NXFXDE01

Near Monument, Colorado 80132

Glenn

Job Details: 03/30/2023

Replace LED Modules in FF & FRZR All Lights Now working.

We serviced a

WHIRLPOOL DRYER

Model WED8127LW1

Near Larkspur, Colorado 80118

Glenn

Job Details: 03/30/2023

"Blower wheel was cracked and had to break wheel off to get to threaded nut, before I could install New Blower. All OPS Test:OK"

We serviced a

KITCHENAID DISHWASHER

Model KDFE104KPS0

Near Fraser, Colorado 80442

Antonio

Job Details: 03/30/2023

insta;;ed new door seal unit tested good

We serviced a

HOTPOINT DISHWASHER

Model HDF330PGR3WW

Near Rifle, Colorado 81650

James R

Job Details: 03/30/2023

Here on whirlpool unit. Took a look at this unit. Drain under sink completely plugged. Cleaned out now unit drains properly. op's good. customer paid service call $109.00 auth code 9RJ44M

We serviced a

MAYTAG DRYER

Model MED7230HW3

Near Pueblo West, Colorado 81007

James

Job Details: 03/30/2023

Installed ordered parts all ops test good

We serviced a

MAYTAG WASHER

Model MVWB766FW1

Near Monument, Colorado 80132

Glenn

Job Details: 03/30/2023

"Install New Glass Lid, All OPS Test:OK"

We serviced a

WHIRLPOOL RANGE

Model WGG745S0FS02

Near Monument, Colorado 80132

Glenn

Job Details: 03/30/2023

"Lower Front Door Glass broken (Shattered)Install New Lower Front Door Glass, All OPS Test:OK"

We serviced a

WHIRLPOOL DISHWASHER

Model WDF310PLAW4

Near Rifle, Colorado 81650

James R

Job Details: 03/30/2023

hooked up to pwr. lights up but cant start unit. start button doesnt work.Removed control panel tried to activate still wont. Faulty control. They will replace unit. customer paid service call $149.00 auth code M9N349Please fill out whirlpool tech satisfaction survey. Thank you.

We serviced a

GE DISHWASHER

Model GDF640HSM2SS

Near Vail, Colorado 81657

Erik

Job Details: 03/30/2023

needs GFCI breaker replacement - test unit with smartHQ service - GOODJOB COMPLETE!Autho#

We serviced a

GE RANGE

Model PTD70EBPT0DG

Near Avon, Colorado 81620

Erik

Job Details: 03/30/2023

installed/tested/GOODJOB COMPLETE

We serviced a

SAMSUNG DRYER ELECTRIC

Model DV50F9A7EVP/A2

Near Pueblo West, Colorado 81007

Brandon

Job Details: 03/30/2023

"Found idler pulley worn out with groove in middle and melted, cleaned back rollers and idler pulley, recommend replacing pulley Dc96-00882c and belt 6602-001655 checked all sensors and heater all good. Cx declined repair at this time but will let us know. Collected svf $129.95 Auth# H9V9TYSvf $129.95 Labor $149.95Parts $187.00Tax $15.33Mps $14.50"

We serviced a

VIKING DOWNDRAFT VENT

Model VGRT48-4GSS NA

Near Colorado Springs, Colorado 80908

Jessie

Job Details: 03/30/2023

"- found broken wires to the vent control, replaced broken wires.- unit has a bad lift motor. verified 120v.- customer will need to get the false wall removed and send us a model tag to see if parts are available for vent."

We serviced a

JENNAIR RANGE

Model JGRP548WP01

Near Colorado Springs, Colorado 80921

Jerimiah

Job Details: 03/30/2023

"Did the check that Techline was suggest, verify that hv lines are separated from the data lines. Yes. Techline deemed unit repairable. As instructed called AIG in next step which I was directed to call claims special number. Gave info to them with SR#. Was instructed to tell Cust to call to cancel and refund warranty renewal due to replacement clause. SR#77336863247735818442 service req. new 7733651096 (AIG. Notes)"

We serviced a

KITCHENAID MICROWAVE

Model KEMC308KSS04

Near Colorado Springs, Colorado 80921

Jerimiah

Job Details: 03/30/2023

"Installed light trans but light was burned out. Replaced light as well. Unit check ok, charged labor. $169.95 CC Auth# R44CRK"

We serviced a

FRIGIDAIRE MICROWAVE

Model 318279512B

Near Colorado Springs, Colorado 80909

Jerimiah

Job Details: 03/30/2023

"Microwave not heating, not spinning no noise, timer only counts down. Switches needed replacing. Done, unit check ok, charged sc labor parts $398.10 chk#14515304493153 primary 5303319559 monitor ; used 2 Microswitch from stock"

We serviced a

WHIRLPOOL MICROWAVE

Model N/A

Near Colorado Springs, Colorado 80910

Carlos

Job Details: 03/30/2023

Needs ring motor at bottom of microwave. Customer will not repair $149.44 CC Auth# C3A9P9; (serial indicated as 'NotAvailable' so system created UIS w/pseudo #)

We serviced a

WHIRLPOOL DISHWASHER

Model WDF330PAHB4

Near Colorado Springs, Colorado 80907

Carlos

Job Details: 03/30/2023

Test op. Runs ok. Loose wiring in Circ. Pump. Runs all ok.

We serviced a

SAMSUNG REFRIGERATOR

Model RF263BEAESR/AA

Near Colorado Springs, Colorado 80919

Jonny

Job Details: 03/30/2023

"Installed parts, 2013 so not hass compatible, custy is happynto have ice soon"

We serviced a

WOLF VENT HOODS

Model PWC542418

Near Colorado Springs, Colorado 80906

Ralph

Job Details: 03/30/2023

"unit has either a faulty motor or the squirrel cage is rubbing on something, although, this motor is on the roof, which is not an area that we work on product, cust to call subzero and CMR."

We serviced a

GE DISHWASHER

Model GDT630P0RFS

Near Colorado Springs, Colorado 80919

Ralph

Job Details: 03/30/2023

"unit is leaking from the heater nuts, going to repalce the heater and the nuts, did not reinstall theunit tdue to the mounting device cust has lost its adhesive so the unit willnot install to the top of the granite counter top, if cust has another tech out to install parts wanted to let them know. parts heater WD05X30818 $85.62, nuts x2 (WD01X10070) $13.13, cust paying sc t0day...cust paid sc autho no. M9YWJJ"

We serviced a

SUBZERO REFRIGERATOR

Model BI-36U

Near Colorado Springs, Colorado 80906

Ralph

Job Details: 03/30/2023

"cust may have left freezer door ajar and alarm was going off, autho no. 9J39UH"

We serviced a

SAMSUNG WASHER

Model WF42H5000AW/A2

Near Colorado Springs, Colorado 80911

Jonny

Job Details: 03/29/2023

"Checked filter, filter was clogged, called techline and reset error code, washer is fixed gave custy washer education"

We serviced a

SAMSUNG WASHER

Model WF45A6400AV/US

Near Colorado Springs, Colorado 80915

Jeremy

Job Details: 03/29/2023

Installed new parts. Ran HASS and passed. Unit is no longer shaking. Asked CX to do survey.

We serviced a

MAYTAG DRYER

Model MED7230HW2

Near Grand Junction, Colorado 81505

James R

Job Details: 03/29/2023

Installed repair kit. Op's Good. Normal operation. Please fill out whirlpool tech satisfaction survey. Thank You.

We serviced a

WHIRLPOOL MICROWAVE

Model WML35011KW01

Near Grand Junction, Colorado 81507

James R

Job Details: 03/29/2023

"Removed unit off wall. Replaced PCBA,Thermal and Transformer. Tested. It is heating. Put mug in for a couple of minutes. Water boiling hot. Op's Ok. Reinstalled back on wall.Please fill out whirlpool tech satisfaction survey. Thank You."

We serviced a

WHIRLPOOL DRYER

Model WED5605MW0

Near Grand Junction, Colorado 81501

James R

Job Details: 03/29/2023

Tore apart and installed a dryer repair kit. Ran unit for awhile. Operation is good. No unusual noise. Please fill out whirlpool tech satisfaction survey. Thank You. ; used 1 4392067 (Dryer Repair Kit) from stock

We serviced a

ASKO DISHWASHER

Model DBI663IS.U

Near Elbert, Colorado 80106

Kris

Job Details: 03/29/2023

unit was not mounted under cabinet. ran test op all ok unit is working to spec at this time.

We serviced a

MAYTAG WASHER

Model MVW6200KW2

Near Avon, Colorado 81620

Antonio

Job Details: 03/29/2023

installed new latch and strike unit tested good

We serviced a

SAMSUNG WASHER

Model WF45A6400AV/US

Near Colorado Springs, Colorado 80915

Jeremy

Job Details: 03/29/2023

Installed new parts. Ran HASS and passed. Unit is no longer shaking. Asked CX to do survey.

We serviced a

MAYTAG WASHER

Model MVW7232HW0

Near Belen, New Mexico 87002

Larry

Job Details: 03/29/2023

CX complaint - Washer making loud noise - Inspected unit and found a suspension rod missaligned - realigned and tested goo - Unit is good to go

We serviced a

WHIRLPOOL DRYER

Model WED5050LW0

Near Pueblo, Colorado 81003

James

Job Details: 03/29/2023

Installed preordered parts all ops test good

We serviced a

SUB ZERO FREEZER

Model IC-24FI-LH

Near Pueblo, Colorado 81004

James

Job Details: 03/29/2023

Installed ordered parts tested operations all check OK advised customer 24-48 hours for ice production. Verified full warranty through 6-1-23 via service central

We serviced a

MAYTAG RANGE

Model MER6770AAW

Near Pueblo, Colorado 81004

James

Job Details: 03/29/2023

Found unit with multiple issues. Door switch is faulty causing light to turn off and on repeatedly as well as cntrl malfunctioning and not sending correct voltage to elements. Needs switch and cntl. Both are nla advised cust xcel will reach out to discuss options.

We serviced a

MAYTAG DRYER

Model MEDC465HW0

Near Belen, New Mexico 87002

Larry

Job Details: 03/29/2023

CX complaint - dryer has no power - Inspected unit and found the fuse open - replaced with TS and tested good - Unit is good to go; used 1 WP3392519 (Fuse) from stock

We serviced a

WHIRLPOOL WASHER

Model WTW4816FW2

Near Pueblo, Colorado 81004

James

Job Details: 03/29/2023

"Installed ordered part. Tested ops, all ckok."

We serviced a

MAYTAG WASHER

Model MEDB835DW4

Near Belen, New Mexico 87002

Larry

Job Details: 03/29/2023

CX complaint - Dryer makes a loud squeeling noise - Inspected unit and found the idler failed - Replaced with TS and tested good - Unit is good to go; used 1 W10837240 (Bracket) from stock

We serviced a

GE WASHER

Model GFW550SPN1DG

Near Beaver Creek, Colorado 81620

Erik

Job Details: 03/29/2023

install inverter kit and relocate ground off motor - test:JOB COMPLETE!

We serviced a

MIDEA DRYER - ELECTRIC

Model MLE52S7AGS

Near Colorado Springs, Colorado 80918

Kris

Job Details: 03/29/2023

installed all parts sent ran test op all ok. unit is working to spec at this time.

We serviced a

SAMSUNG ELECTRON RANGE

Model NE59J7630SS/AA

Near Pueblo, Colorado 81006

James

Job Details: 03/29/2023

Installed ordered parts. All ops test good.

We serviced a

GE WALLOVEN

Model PTS7000SN2SS

Near Avon, Colorado 81623

Erik

Job Details: 03/29/2023

installed/test: GOODJOB COMPLETE!

We serviced a

GE RANGE

Model JB250DF1CC

Near Pueblo, Colorado 81003

Ken

Job Details: 03/29/2023

Installed lock and tested

We serviced a

BOSCH DISHWASHER

Model SHE65T55UC/02

Near Pueblo, Colorado 81006

James

Job Details: 03/29/2023

Installed ordered parts all ops test good

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRS325SDHB08

Near Rio Rancho, New Mexico 87144

Joseph

Job Details: 03/29/2023

repaired system with start device. unit tested good. unit is good to go.

We serviced a

MAYTAG DRYER

Model MGD7230HW1

Near Moriarty, New Mexico 87035

Jason

Job Details: 03/29/2023

installed motor and blower wheel unit checks ok

We serviced a

MAYTAG WASHER

Model MVW6200KW2

Near Albuquerque, New Mexico 87110

Jason

Job Details: 03/29/2023

installed parts did not fix issue updated firmware per service pointer W11624962 unit opperation checks ok

We serviced a

MAYTAG REFRIGERATOR

Model MSS25C4MGZ06

Near Colorado Springs, Colorado 80924

Kris

Job Details: 03/29/2023

installed compressor. ran test op all ok. unit is working to spec at this time.

We serviced a

MAYTAG WASHER

Model MVW6230HW3

Near Albuquerque, New Mexico 87111

Jason

Job Details: 03/29/2023

installed latch and strike unit checks ok

We serviced a

WHIRLPOOL WASHER

Model WTW5000DW3

Near Albuquerque, New Mexico 87111

Jason

Job Details: 03/29/2023

installed suspension and re-leveled unit unit opperatiopn checks ok

We serviced a

AMANA REFRIGERATOR

Model ASI2175GRW00

Near Moriarty, New Mexico 87035

Jason

Job Details: 03/29/2023

installed parts unit checks ok

We serviced a

WHIRLPOOL WASHER

Model WTW5010LW0

Near Clifton, Colorado 81520

James R

Job Details: 03/29/2023

Replaced lid strike and motor run capacitor. test op's good. Normal operation. Please filll out whirlpool tech satisfaction survey. Thank You.

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF767SDHZ03

Near Los Lunas, New Mexico 87031

Larry

Job Details: 03/29/2023

Installed IM and fill tube and tested good - Unit is good to go

We serviced a

SAMSUNG DISHWASHER

Model DW80R2031US/AA

Near Colorado Springs, Colorado 80908

Brandon

Job Details: 03/29/2023

"Found leak coming from 90 on water valve, recommend replacing with brass 90 instead of plastic, also physical damage to base not covered by Samsung"

We serviced a

SAMSUNG DISHWASHER

Model DW80R2031US/AA

Near Colorado Springs, Colorado 80908

Brandon

Job Details: 03/29/2023

"Replaced parts and tested op all ok ran quick cycle thru drain, fill and wash and confirmed vent fan is working, unit working as intended"

We serviced a

WHIRLPOOL WASHER

Model LXR7244JQ1

Near Pueblo, Colorado 81004

Ken

Job Details: 03/29/2023

Installed pump and tested

We serviced a

ZLINE RANGE - GAS

Model RAS30

Near Colorado Springs, Colorado 80908

Jerimiah

Job Details: 03/29/2023

"Surface burners randomly ignited, randomly sent gas to burners, replaced gas regulator. Unit check ok. Cust will keep track of unit functionality."

We serviced a

BOSCH DISHWASHER

Model SHE3AR76UC/28

Near Pueblo, Colorado 81005

Ken

Job Details: 03/29/2023

Tested dw and checks out OK. Dw is new to customer and she has not had a dw that doesn't use an element to dry. Explained how the drying system works and advised customer to crack door open after cycle finishes

We serviced a

KENMORE DRYER

Model 11087511702

Near Pueblo, Colorado 81004

Ken

Job Details: 03/29/2023

Installed element and tested

We serviced a

GENERAL ELECTRIC DRYER

Model DBVH512EF0WW

Near Pueblo, Colorado 81005

Ken

Job Details: 03/29/2023

Installed parts and tested

We serviced a

WHIRLPOOL DRYER

Model WGD5605MC0

Near Los Lunas, New Mexico 87031

Larry

Job Details: 03/29/2023

Cx complaint - dryer not starting - Inspected unit and found the drive belt failed - Replaced with TS and tested good - Unit is good to go; used 1 661570V (Drive Belt) from stock

We serviced a

SAMSUNG DRYER

Model DVE50BG8300VA3

Near Colorado Springs, Colorado 80908

Jonny

Job Details: 03/29/2023

"Installed parts, gave customer dryer education, hass gave me c80 error code, I took a pic of it, he hasn't had his unit for more then a week, it came broken, I've seen this issue before and hope this fix3s it if not he needs a new unit"

We serviced a

SAMSUNG DRYER - ELECTRIC

Model DVE45T3200W/A3

Near Colorado Springs, Colorado 80911

Jeremy

Job Details: 03/29/2023

Installed new parts. Dryer is now working. Asked cx to leave a review.

We serviced a

SAMSUNG OVEN

Model NV51K6650DS/AA 01

Near Colorado Springs, Colorado 80904

Jerimiah

Job Details: 03/29/2023

"Replaced all parts. Still loud buzzing is occurring after 306 degrees on either oven. Disclosed to Techline extensive work history, Samsung will set unit up for replacement in review with case number below, joe from Techline says Cust will be contacted by 2-3 business days from today. #7005454644"

We serviced a

WHIRLPOOL OVEN

Model WFE525S0JZ0

Near Colorado Springs, Colorado 80938

Aaron

Job Details: 03/29/2023

"Control relay stuck for light, was able to reset the board and have the light shut off. Needs control board. Control w11544349 $260.86Tax $21.39Hc $129.95Labor $159.95Total job $572.1530 day estimateNo return on partsAuth 129.95 hc #AA3493"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRF555SDFZ11

Near Colorado Springs, Colorado 80908

Aaron

Job Details: 03/29/2023

"Ice maker is shorted out, valve has power but is not engaging, replaced parts and placed unit into harvest mode, filled and working well now. Advised customer of 5 star survey"

We serviced a

WHIRLPOOL REFRIGERATOR

Model WRT311FZDW02

Near Colorado Springs, Colorado 80910

Carlos

Job Details: 03/29/2023

"Installed listed parts, Runs ok.Customer will observe"

We serviced a

MAYTAG WASHER

Model MVW6200KW2

Near Fountain, Colorado 80817

Carlos

Job Details: 03/29/2023

Installed listed parts. Found that outlet where washer is plugged is really loose causing resistance build up in plug and generating heat taking out electronics. Informed customer to have outlets replaced. Washer runs ok

We serviced a

SAMSUNG REFRIGERATOR

Model RF265BEAESR/AA

Near Colorado Springs, Colorado 80924

Jonny

Job Details: 03/29/2023

"Installed parts, 2017 so not hass compatible, gave custy fridge education"

We serviced a

JENNAIR WALLOVEN

Model JMW2430LL00

Near Monument, Colorado 80132

Jerimiah

Job Details: 03/29/2023

"Cust not available, house was open during construction, no problem found, no scratches, missing parts, oven preheated, microwave convect working. Unknown why call was placed on unit. Closing call."

We serviced a

SAMSUNG WASHER

Model WA52M7750AV-A4

Near Monument, Colorado 80132

Jonny

Job Details: 03/29/2023

"Did diagnostic on unit passed, took pic. Gave custy washer education. she wants to order shocks on her own because she feels like something is still wrong paid svf Autho#9mfn33"

We serviced a

SAMSUNG DRYER

Model DV45H6300EG/A3

Near Monument, Colorado 80132

Jonny

Job Details: 03/29/2023

"Installed part, unit heats, custy is pleased Gave me cash as payment"

We serviced a

MAYTAG WASHER TOP LOAD

Model SAV515DAWW

Near Vail, Colorado 81657

Antonio

Job Details: 03/29/2023

found bad bearing and craked tank cx is goiung to buy new AUTH #339w4w

We serviced a

SAMSUNG WASHER

Model WA52A5500AC/US

Near Colorado Springs, Colorado 80925

Brandon

Job Details: 03/29/2023

"Replaced pcb tested op all ok hass passed calibrated unit, cx has POP but will call into office to give it to us"

We serviced a

SAMSUNG DISHWASHER

Model DW80R2031US/AA

Near Colorado Springs, Colorado 80911

Brandon

Job Details: 03/29/2023

"Cx complaint is express 60 flashing within 10 minutes of starting cycle, water supply error, water supply may have been kinked because it is very long, loose connection on main board, tested all components all reading good, ran express 60 cycle with sanitize option all the way thru no errors after complete cycle"

We serviced a

SAMSUNG REFRIGERATOR

Model RF18A5101SR/AA

Near Colorado Springs, Colorado 80911

Brandon

Job Details: 03/29/2023

Replaced Evap cover assy tested op all ok ran noise test in hass to verify fan operation and check for noise all good hass passed

We serviced a

KITCHENAID DISHWASHER

Model KDFM404KPS0

Near Monument, Colorado 80132

Glenn

Job Details: 03/29/2023

"Unit delivered on 03-21-2023.Found water in lower front leak tray, causing float to initiate drain cycle. Emptied water, ran unit.. found water leaking down RS of unit during diag test. Unit is installed too tightly, and suggest have customer pull out unit, or call installer back to have it pulled out for inspection of where leak is coming from. Suggest call us back once unit is out."

We serviced a

MAYTAG WASHER

Model MVW4505MW0

Near Los Lunas, New Mexico 87031

Larry

Job Details: 03/29/2023

This was another cx instruct call - I explained the last time that there will be charges if we come back and dont find anything wrong - CX d0esn't like the way it sounds or works - CX refused to pay - CX owes $140.18

We serviced a

JENNAIR RANGE HOOD

Model JXW8536HS1

Near Monument, Colorado 80132

Glenn

Job Details: 03/29/2023

Hood missing retaining clip for cover.All OPS Test:OK

We serviced a

WHIRLPOOL RANGE

Model WFE525S0JZ3

Near Colorado Springs, Colorado 80924

Glenn

Job Details: 03/29/2023

"For some reason this ticket didnnt save properly?Re-closing ticket. Also, already dispososed of old switch at customers house, as it did not prompt me to keep it the first time I closed ticket. Also, customer did sign ticket.Install new LF Burner Infinite Switch.All OPS Test:OK"

We serviced a

SAMSUNG DRYER ELECTRIC

Model DVE50R5400V/A3

Near Colorado Springs, Colorado 80906

Brandon

Job Details: 03/29/2023

"Found heater element no continuity, replaced heater dc47-00019a tested op all ok hass passed, vaccumed out inside unit cavity Collected total $438.31 Auth# 9U4JKESvf $129.95Labor $149.95Part $133.00Tax $10.91Mps $14.50; used 1 dc47-00019a (Heater) from stock"

Our Service

Our Company