We serviced a
WHIRLPOOL DRYER
Model WED4815EW
Near Colorado Springs, Colorado 80918
Aaron
Job Details:
12/30/2022
"Shifter arm not in correct position, corrected and tested unit. Working well now."
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKZ0
Near Fraser, Colorado 80442
Antonio
Job Details:
12/29/2022
installed new element tested unit unit tested good
We serviced a
WHIRLPOOL MICROWAVE
Model KMBD104GSS01
Near Fraser, Colorado 80442
Antonio
Job Details:
12/29/2022
found units door switch now engaging properly ajusted door switch unit tested good
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKV0
Near Colorado Springs, Colorado 80922
Jim
Job Details:
12/29/2022
replaced the user interface and the console unit test ok
We serviced a
KITCHEN AID DISHWASHER
Model KDTE204KBS0
Near Colorado Springs, Colorado 80924
Jim
Job Details:
12/29/2022
"replaced the door panel, took 2 pics unit test ok"
We serviced a
JENN-AIR REFRIGERATOR
Model JFFCC72EHL03
Near Winter Park, Colorado 80482
Antonio
Job Details:
12/29/2022
installed new water valve unit tested good
We serviced a
JENN-AIR RANGE
Model JDRP436HL01
Near Winter Park, Colorado 80482
Antonio
Job Details:
12/29/2022
found conviction fan blade rubbing on back wall ajusted ran unit to 350 unit tested good
We serviced a
WHIRLPOOL DISHWASHER
Model WDF331PAHS1
Near Belen, New Mexico 87002
Larry
Job Details:
12/29/2022
CX complaint - Lights blinking - Inspected unit and found the float switch harness loose - Secured harness and tested good - Unit is good to go
We serviced a
GENERAL ELECTRIC SINGLE WALL OVEN
Model JKS3000SN1SS
Near Colorado Springs, Colorado 80920
Jerimiah
Job Details:
12/29/2022
"Installed replacement controller and thermal sensor. Unit check ok, Cust will keep track of unit functionality. Other notes: Both elements receiving 239v. Bake 22.1 Ohm. Broil 16.5 Ohm"
We serviced a
WHIRLPOOL RANGE
Model WEE510S0FS2
Near Colorado Springs, Colorado 80927
Ken
Job Details:
12/29/2022
"Installed cb, console, screws, and burner and tested"
We serviced a
AMANA RANGE
Model ACR4303MMS0
Near Colorado Springs, Colorado 80916
Ken
Job Details:
12/29/2022
Installed new switches. Customer said the burner turns off and then turns back on while using a griddle. Advised customer that the burners have a safety feature the turns the burners off at a preprogrammed temp and turns them back on once the temp goes below the programmed temp. Also recommended getting a different type of griddle with a flat bottom. The one they are using has a fluted bottom and does not work well with those types of elements. No complaints of any other pans. Discussed survey with customer
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHV0
Near Colorado Springs, Colorado 80927
Jim
Job Details:
12/29/2022
"went to replace the tub assembly found that the tub frame was able to adjust so the door would open and shut with no noise, did not replace the tub or the support"
We serviced a
WHIRLPOOL WASHER
Model LAT8714AAM
Near Colorado Springs, Colorado 80907
Jim
Job Details:
12/29/2022
found the lid switch is open reccommend replace the lid switch customer declined repair
We serviced a
VIKING REFRIGERATOR
Model VCSB423BKBR
Near Woodland Park, Colorado 80863
Ralph
Job Details:
12/29/2022
installed parts and unit checked okay
We serviced a
JENN-AIR RANGE
Model JGS1450FS
Near Woodland Park, Colorado 80863
Ralph
Job Details:
12/29/2022
installed listed parts and unit checked okay...told cust about the survey
We serviced a
KITCHEN AID DISHWASHER
Model KUDI01FLSS6
Near Santa Fe, New Mexico 87505
Jason
Job Details:
12/29/2022
Installed link suport unit checks ok
We serviced a
MAYTAG WASHER
Model MVW6230HW2
Near Santa Fe, New Mexico 87505
Jason
Job Details:
12/29/2022
installed drawer and housing unit checks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT148FZDB04
Near Santa Fe, New Mexico 87507
Jason
Job Details:
12/29/2022
installed compressor and charged unit up operation checks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ08
Near Santa Fe, New Mexico 87507
Jason
Job Details:
12/29/2022
sealed gaps from liner to cabinet unit checks ok
We serviced a
WHIRLPOOL DISHWASHER
Model WDF330PAHB4
Near Santa Fe, New Mexico 87507
Jason
Job Details:
12/29/2022
installed strike unit checks ok
We serviced a
MAYTAG WASHER
Model MVWB855DC3
Near Colorado Springs, Colorado 80908
Jeremy
Job Details:
12/29/2022
installed new lid
We serviced a
FRIGIDAIRE WASHER
Model LTF2940FS1
Near Pueblo, Colorado 81004
James
Job Details:
12/29/2022
Installed ordered parts ops ckok
We serviced a
KITCHENAID REFRIGERATOR
Model KSRB270ABL07
Near Pueblo, Colorado 81003
James
Job Details:
12/29/2022
Installed previous techs ordered parts. Tested ops all ckok
We serviced a
MAYTAG WASHER
Model MHW6000XG2
Near Pueblo, Colorado 81001
James
Job Details:
12/29/2022
Installed previous techs ordered part. All ops test good
We serviced a
KENMORE REFRIGERATOR
Model 106.547898
Near Pueblo, Colorado 81003
James
Job Details:
12/29/2022
"Installed previous techs ordered part. Checked evap drain, all water draining as designed. All other ops test good."
We serviced a
BLUESTAR RANGE
Model RNB-366BV2
Near Monument, Colorado 80132
Kris
Job Details:
12/29/2022
cx still owes 319.95 for labor.mmaguire@bluestarcooking.com 2330 installed all parts. ran test op unit is still off by about 80 degrees.set to 250 cycles to 350 then back on 327-328 called techline. techline will need to escalate to engineering. possible coincern altitude 6900-7000 feet.
We serviced a
WHIRLPOOL MICROWAVE
Model WOC75EC0HS04
Near Colorado Springs, Colorado 80921
Kris
Job Details:
12/29/2022
ran test op with cx all ok. cx is aware of 5 star survey.
We serviced a
WHIRLPOOL KITCHEN
Model WDT750SAKZ0
Near Colorado Springs, Colorado 80924
Kris
Job Details:
12/29/2022
cx inspected door. installed door reseated ui touch pad. ran test op all ok unit is working to spec.
We serviced a
SAMSUNG RANGE
Model NX58R5601SS/AA
Near Colorado Springs, Colorado 80921
Jerimiah
Job Details:
12/29/2022
Replaced valve regulator. Re sealed hose connections with gas tape as usual. Unit check ok. Cust will keep track of any possible smells and will contact us within 30 if problems persist. Charged labor $169.95 CC Auth# 4KU9EY
We serviced a
JENN AIR REFRIGERATOR
Model JBZFL30IGX00
Near Colorado Springs, Colorado 80908
Jessie
Job Details:
12/29/2022
Replaced icemaker. Test opm unit filled well all ok
We serviced a
MAYTAG DRYER
Model MED8230HC0
Near Colorado Springs, Colorado 80908
Jessie
Job Details:
12/29/2022
Replaced bad panel. Test op. All okDiscussed 5 star survey
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHB
Near Colorado Springs, Colorado 80908
Kris
Job Details:
12/29/2022
replaced cntrl and wash pump. unit has leaking supply line replaced ran test op all ok unit is working to spec. cx will monitor unit when in use. cx is aware of 5 star survey.
We serviced a
AMANA DRYER
Model NED4655EW1
Near Colorado Springs, Colorado 80905
Ken
Job Details:
12/29/2022
Replaced element and cutoff. Dryer is heating properly. Advised customer that there maybe a venting issue. Just from what's exposed behind the dryer and above the dryer there are 4 elbows. Spoke to wp and they said the venting is most likely the issue. That unit does not push enough cfm for the existing run and is causing resistance. Spoke with the customer and he feels it a user error by the tenant but will address it if it blows again. Discussed survey with customer
We serviced a
SAMSUNG RANGE - GAS
Model NX60A6311SS/AA
Near Colorado Springs, Colorado 80920
Jerimiah
Job Details:
12/29/2022
Installed replacement ignition harness. Unit check ok.
We serviced a
WOLF RANGE
Model PS484FK-1 NA
Near Colorado Springs, Colorado 80907
Jerimiah
Job Details:
12/29/2022
"Large oven having problems with temp, subzero is closed and unable to reach assistance to verify problems. Unable to verify model serial. Only going by what is listed is the parts that could be culprit plus Cust wants oven floor panel for large oven replaced, problem could also be large oven bake igniter. Charging service call $149.95. Chk#18932 Cust will call back after new year when subzero opens. 819228? bottom panel 815506? large thermostat"
We serviced a
MAYTAG DRYER
Model MEDC465HW0
Near Colorado Springs, Colorado 80909
Jeremy
Job Details:
12/29/2022
Checked all the wiring. Found loose connection. Dryer is now working.
We serviced a
GE DRYER
Model GTD33EASK0WW
Near Colorado Springs, Colorado 80906
Ken
Job Details:
12/29/2022
Timer was spun counter-clockwise and was not turning on properly. Turned timer knob clockwise two times and dryer was starting properly after that. Customer said she will most likely buy new if she has any more problems. Dryer is an older model. Collected sc 129.95 auth kjk4y3
We serviced a
WHIRLPOOL REFRIGERATOR
Model ET1MHKXMQ04
Near Pueblo, Colorado 81001
James
Job Details:
12/29/2022
Found unit with a partial frost pattern. Unit has a slow leak in the evaporator. Needs evaporator and filter drier. Evaporator is NLA. No repair can be completed collected 129.95 for sc $129.95 CC Auth# H9XNH9
We serviced a
WHIRLPOOL DISHWASHER
Model MDB9959SKZO
Near Albuquerque, New Mexico 87108
Larry
Job Details:
12/29/2022
CX complaint - F8E4 error - Inspected unit and found the valve leaking from black hose - Cut and reattatched - Unit is operating as designed
We serviced a
GENERAL ELECTRIC DRYER - ELECTRIC
Model QFD15ESSN1WW
Near Colorado Springs, Colorado 80905
Jim
Job Details:
12/29/2022
replaced the heat element and the outlet thermister unit is working properly reccommend moniter the home dryer vent disconnected the outdoor exhaust for moniter with nylon at end of dryer hose
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDBM03
Near New Castle, Colorado 81647
James R
Job Details:
12/29/2022
replaced pantry gsk. heated to form a good seal. Please fill out whirlpool customer satisfaction survey. Thank you.
We serviced a
WHIRLPOOL DISHWASHER
Model KDPM604KPS0
Near Rio Rancho, New Mexico 87144
Joseph
Job Details:
12/29/2022
installed parts listed. unit tested good unit is good to go.
We serviced a
MAYTAG DRYER
Model MED8630HW0
Near Aspen, Colorado 81611
James R
Job Details:
12/29/2022
cleaned roller and idler pulley shafts. installed repair kit. cleaned unit. reassembled. and checked op's good. auth code 43499F customer paid $456.38 Please fill out whirlpool customer satisfaction survey. Thank You.
We serviced a
WHIRLPOOL WASHER
Model WTW5100HC2
Near Albuquerque, New Mexico 87110
Larry
Job Details:
12/29/2022
Installed parts listed and tested good - Unit is good to go
We serviced a
GENERAL ELECTRIC DISHWASHER
Model PDP715SYN4FS
Near Colorado Springs, Colorado 80905
Jim
Job Details:
12/29/2022
"found the lower spray arm ends coming off reattatched, unit test ok"
We serviced a
SAMSUNG WASHER
Model WF45B6300AC/US
Near Colorado Springs, Colorado 80919
Jonny
Job Details:
12/29/2022
"Installed parts, hass passed, washer works"
We serviced a
SAMSUNG OVEN
Model NV51T5511DS/AA
Near Colorado Springs, Colorado 80916
Brandon
Job Details:
12/29/2022
Replaced parts and tested op all ok hass passed and sent asked cx to complete survey
We serviced a
WHIRLPOOL DISHWASHER
Model WDF550SAHS
Near Aspen, Colorado 81611
James R
Job Details:
12/29/2022
removed kick plate. found fitting at water valve leaking. Removed and installed thread sealant tape. Reinstalled. fitting good and tight. No leak.Please fill customer satisfaction survey. Thank You.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ04
Near Albuquerque, New Mexico 87110
Larry
Job Details:
12/29/2022
Installed parts listed and tested good - Unit is good to go
We serviced a
JENN AIR RANGE
Model SVD48600P
Near Colorado Springs, Colorado 80917
Jessie
Job Details:
12/29/2022
Replaced customer rebuilt bd. All working correctly.Charged customer same rate to pull the bd$159.95 CK Auth# EHLVPA
We serviced a
WHIRLPOOL REFRIGERATOR BOT
Model GZ25FSRXYY2
Near Colorado Springs, Colorado 80922
Jessie
Job Details:
12/29/2022
Unit has no water. Jumped out water valve worked. Jumped out icemaker worked. Suggesting icemaker.30 days estimate. No return on partsIcemaker#W10882923 $195.72Tax $16.05Sc $129.95$14.50Labor $189.95Total $546.17Customer wants to think about repair
We serviced a
VERONA OVEN
Model VEBIG30NSS
Near Peyton, Colorado 80831
Jessie
Job Details:
12/29/2022
Oven lit right up for me. I think it might have had air in the line. Ran to temp all ok$249.90 CK Auth# 49H9F3
We serviced a
SAMSUNG DRYER
Model DVE45T6000W/A3
Near Fountain, Colorado 80817
Jonny
Job Details:
12/29/2022
"Installedarts, hass passed, dryer is worn down custy is happy"
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF507HPS00
Near Albuquerque, New Mexico 87120
Larry
Job Details:
12/29/2022
Could not duplicate issue
We serviced a
MAYTAG DRYER
Model MGDC465HW1
Near Aspen, Colorado 81611
James R
Job Details:
12/29/2022
removed lint screen. run unit. air is blowing back out of lint screen area. removed vent tubing. Run unit again. air is now being sucked down into the lint screen area. checked vent temperature timed dry hi temp 170 degrees. set to hi temp sensor dry 172 degrees cycled off then back on at 135 degrees. unit is operating normally. venting is badly restricted not allowing air to vent out. customer paid service call $209.00 auth code KLWUV3 Thank you.please fill out customer satisfaction survey. Thank You.
We serviced a
SAMSUNG WASHER
Model WF45B6300AC/US
Near Fountain, Colorado 80817
Jonny
Job Details:
12/29/2022
"Took off the top, saw broken counter weights called techline and went on visual support unrepairable 7005307751 got pic of p.o.p"
We serviced a
GE MICROWAVE
Model JVM3160DF8WW
Near Colorado Springs, Colorado 80904
Jerimiah
Job Details:
12/29/2022
"Found unit overheated burning out mag and TCO due to improper blower configuration, needs mag and TCO replaced. Cust is holding off on repairs. Charging service call $129.95 CC Auth# K4F994WB27X10927 magWB18X35517 mag tco"
We serviced a
SAMSUNG DISHWASHER
Model DW80R2031US/AA
Near Colorado Springs, Colorado 80920
Brandon
Job Details:
12/29/2022
Replaced door took pictures and tested op all ok asked cx to complete survey
We serviced a
SAMSUNG WASHER
Model WF419AAW/XAA03
Near Colorado Springs, Colorado 80919
Brandon
Job Details:
12/29/2022
"Shocks and spring are worn out needs replaced, cx will let us know if they want to repair Collected Svf $129.95 Auth# LR9V33Svf $129.95Labor $189.95Parts $523.16Tax $42.90Mps $14.50"
We serviced a
WOLF RANGE - GAS
Model SRT364C
Near Manitou Springs, Colorado 80829
Ralph
Job Details:
12/29/2022
"installed parts and unit checked okay, only entering my labor rate and service charge for this repair, believe office will need to add the amt for mileage and the part and bill Mountain high appliance"
We serviced a
FRIGIDAIRE RANGE
Model LFEF3054TF
Near Pueblo, Colorado 81003
Aaron
Job Details:
12/29/2022
"L1 line bent, not sending full power, corrected and tested unit, working well now."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT148FZDB04
Near Santa Fe, New Mexico 87507
Jason
Job Details:
12/29/2022
installed compressor and charged unit up operation checks ok
We serviced a
SAMSUNG DRYER - ELECTRIC
Model DVE45N5300
Near Colorado Springs, Colorado 80919
Brandon
Job Details:
12/29/2022
"Connector on thermostat was loose/not connected, reconnected tested op all ok hass passed and sent"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ
Near Colorado Springs, Colorado 80920
Aaron
Job Details:
12/29/2022
"Inlet valve hose clamp not in correct position, corrected and tested unit, working well now."
We serviced a
SAMSUNG REFRIGERATOR
Model RF24R7201SG/AA
Near Colorado Springs, Colorado 80909
Jonny
Job Details:
12/29/2022
"Got c-40 error code, called techline, Pcb da94-04604dDrain tube da97-19898aIce maker da97-13718cLabor 189.95 Tax 41.46Sf 129.95 14.50 Autho#hae44nWill thnk on it Collected sf"
We serviced a
GENERAL ELECTRIC MICROWAVE OVEN
Model JVM6175YK5FS
Near Colorado Springs, Colorado 80907
Jerimiah
Job Details:
12/28/2022
Installed replacement mag and TCO. Unit check ok.
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ0
Near Colorado Springs, Colorado 80922
Jim
Job Details:
12/28/2022
found the wash motor assembly inop reccommend replace the wash motor assembly which I had on truck unit test ok TAS
We serviced a
MAYTAG WASHER
Model MVW6230HW0
Near Albuquerque, New Mexico 87120
Larry
Job Details:
12/28/2022
installed parts listed and tested good - unit is good to go
We serviced a
WHIRLPOOL WASHER
Model WTW8127LC0
Near Albuquerque, New Mexico 87104
Larry
Job Details:
12/28/2022
Instlled parts listed and tested good - Unit is good to go
We serviced a
WHIRLPOOL DRYER
Model MGD7230HW1
Near Albuquerque, New Mexico 87121
Larry
Job Details:
12/28/2022
CX complaint - Dryer shuts off after a few min - Inspected unit and found the moisture sensor disconnected - Secured connection and tested good - Unit is good to go
We serviced a
SAMSUNG DRYER
Model DV45H6300EG/A3
Near Colorado Springs, Colorado 80911
Jonny
Job Details:
12/28/2022
"Installed part, unit doesn't have hass connections, dryer spins and doesn't stop now"
We serviced a
JENN-AIR REFRIGERATOR
Model JFX2897DRM02
Near Albuquerque, New Mexico 87120
Joseph
Job Details:
12/28/2022
installed parts listed. let customer know to wait 24 hours for cooling. no further issues.
We serviced a
WHIRLPOOL VENT HOODS
Model WVW7336JS0
Near Albuquerque, New Mexico 87120
Joseph
Job Details:
12/28/2022
Installed parts listed. Unit tested good. Unit is good to go.
We serviced a
SUBZERO REFRIGERATOR
Model 700TR2
Near Colorado Springs, Colorado 80908
Jessie
Job Details:
12/28/2022
"Unit has a leak in the evap of drawers Evap#4204690 $233.58Filter dryer#7006964 $86.14Total parts $319.72Tax $26.22Sc $149.95$14.50Refrigerant $255Labor $895.95Total $1,661.34No return on parts. Very warned on compressor, as of now I have disconnected compressor because it is working.Customer wants to think about repair$149.95 CK Auth# HCP43C"
We serviced a
SAMSUNG OVEN
Model NQ70M6650DS/AA
Near Colorado Springs, Colorado 80921
Jessie
Job Details:
12/28/2022
"Connected haas. Pulled c10,c10,c21. Talked to techline at Samsung being limited on haas. Techline wants me to replace pump, thermistor and bd... Bd#de92-04045c $319.74Pump#dg94-01633c $280.25Sensor #dg32-00004c $169.78Total parts $769.80Tax $63.12Sc $129.95$14.50Labor $279.95Total $1257.32No return on partsCustomer wants to think about repair$129.95 CK Auth# 4HV343"
We serviced a
WHIRLPOOL DRYER
Model KGCP467JSS06
Near Colorado Springs, Colorado 80921
Jessie
Job Details:
12/28/2022
I cannot read model number. Over half missing. Sent owner picture.Unit has a broken orfice. Unit will need a new orfice middle rear and middle rear burner assy. Checked to make sure unit comes apart. Customer thinks he has the model info somewhere at his shop. He will get back to us.30 day sc$129.95 CC Auth# HPR39LNo return on parts
We serviced a
WHIRLPOOL WASHER
Model WFW5620HW3
Near Colorado Springs, Colorado 80938
Glenn
Job Details:
12/28/2022
"Install New Shocks & Springs, All OPS Test:OK"
We serviced a
SAMSUNG DISHWASHER
Model DW80R9950UG/AA 01
Near Peyton, Colorado 80831
Glenn
Job Details:
12/28/2022
"Install New Spray Motor Wash Assy, Swap side motor from old unit. All OPS Test:OK , Ran HASS, Report sent"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF736SDAF10
Near Peyton, Colorado 80831
Glenn
Job Details:
12/28/2022
"Install New FRZR Evap Motor Assy. All OPS Test:OK$325.51 Already Collected for Part, Tax & MPS.Collected Labor $174.95 + Tip $17.50 = $192.45 Autho# FUNYK4"
We serviced a
MAYTAG WASHER
Model MVWB765FW3
Near Albuquerque, New Mexico 87105
Larry
Job Details:
12/28/2022
Replaced suspension and tested good - unit is good to go
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ0
Near Los Lunas, New Mexico 87031
Larry
Job Details:
12/28/2022
Cx complaint - Not filling - Inspected unit and found the valve connection loose - Secured connection and tested good - Unit is good to go
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ02
Near Colorado Springs, Colorado 80908
Kris
Job Details:
12/28/2022
pulled unit apart steamed out ice installed new fan all ok cx will monitor unit. cx is aware of 5 star review.
We serviced a
JENN AIR WALLOVEN
Model n/a
Near Colorado Springs, Colorado 80906
Jerimiah
Job Details:
12/28/2022
Installed replacement blowers. Unit check ok. Charged labor $189.98 CC Auth# UL934X. Disclosed survey to cust.
We serviced a
JENN-AIR RANGE
Model JDR8895AAS
Near Colorado Springs, Colorado 80906
Jerimiah
Job Details:
12/28/2022
"Unit turned on by itself 2 months ago once, non repeatable. Cust has since kept power turned off unit, reapplied power and membrane not responding except cancel. Needs controller replaced, Cust is holding off on repairs. Labor would be $189.95 if Cust decides so in future. Disclosed survey with Cust 5star FCC.WP5701M796-60 controller $516.86"
We serviced a
KITCHENAID DISHWASHER
Model KUDS50FVPA2
Near Colorado Springs, Colorado 80919
Ralph
Job Details:
12/28/2022
"installed listed part and adjusted door seal, saw no signs of leaking, cust to monitor"
We serviced a
WOLF RANGE
Model DF48650GSP
Near Colorado Springs, Colorado 80907
Ralph
Job Details:
12/28/2022
replacedf part and unit chekced okay...amy 1.25 hours on this unit please
We serviced a
BOSCH M/W OTR
Model HMV3053U/02
Near Cañon City, Colorado 81212
James
Job Details:
12/28/2022
"Found damage to unit on upper cover and main chassis. Main chassis cannot be repaired, unit will need to be replaced. Called bosch and talked to Tom unit is being submitted for replacement. Case #4103206305. Gave cust case number and informed 24-48 hrs for call back"
We serviced a
SAMSUNG REFRIGERATOR
Model RS267TDBP
Near Colorado Springs, Colorado 80921
Kris
Job Details:
12/28/2022
rc temp@37.5 fc temp@12.5 replaced filter purged air from line. ran 1 gal of water. vacuumed coils checked all fans unit is working to spec.
We serviced a
WHIRLPOOL REFRIGERATOR
Model JFFCC72EHL02
Near Colorado Springs, Colorado 80921
Kris
Job Details:
12/28/2022
installed IM ran test op with service matters. all ok unit harvested and filled to spec. talked to cx about 5 star survey.
We serviced a
DACOR OVEN
Model MORS130S
Near Colorado Springs, Colorado 80911
Ken
Job Details:
12/28/2022
Installed new board and tested. Unit is working properly. Collected labor 189.95 auth t93kl4
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHB04
Near Cañon City, Colorado 81212
James
Job Details:
12/28/2022
Discussed survey. Installed ordered water valve tested ops. No longer making noise when filling. All other ops test good.
We serviced a
BOSCH DISHWASHER
Model SHPM65Z55N/20
Near Colorado Springs, Colorado 80924
Jim
Job Details:
12/28/2022
replaced the drain pump unit test ok
We serviced a
SAMSUNG DRYER - ELECTRIC
Model DV42H5200EP/A3
Near Colorado Springs, Colorado 80920
Jim
Job Details:
12/28/2022
found the idler pulley is noisey reccommend replace the idler pulley and drive belt the total for repair would be521.73customer declined repair
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Colorado Springs, Colorado 80916
Ken
Job Details:
12/28/2022
"Dryer would pop the breaker after running for a few minutes. Found loose wire at the block. Tightened screws at block and installed element, switch, and fuse. Dryer is running properly. Discussed survey"
We serviced a
BOSCH DISHWASHER
Model SHP865ZD5N
Near Colorado Springs, Colorado 80906
Ken
Job Details:
12/28/2022
Installed the parts ordered and tested ran dw for approximately 25 mins with no leaks
We serviced a
WHIRLPOOL WASHER
Model NTW4516FW3
Near Colorado Springs, Colorado 80915
Jeremy
Job Details:
12/28/2022
Installed new controlboard. Performed a test cycle. Unit is working as designed. Asked CX to please do whirlpool survey.
We serviced a
WHIRLPOOL DRYER
Model MED7230HC1
Near Colorado Springs, Colorado 80906
Jeremy
Job Details:
12/28/2022
Installed new controlboard and performed test cycle. Unit is functioning properly.
We serviced a
BOSCH DISHWASHER - BUI
Model SHXM4AY55N/27
Near Colorado Springs, Colorado 80908
Glenn
Job Details:
12/28/2022
"Install New Main PCB & Valve, All OPS Test:OK, No Errors or Leaks."
We serviced a
WHIRLPOOL DISHWASHER
Model WDF330PAHW4
Near Cañon City, Colorado 81212
James
Job Details:
12/28/2022
Survey discussed. Installed preordered parts. All ops test good.
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706EBS01
Near Colorado Springs, Colorado 80904
Ralph
Job Details:
12/28/2022
installed part and unit checked okay