We serviced a
MAYTAG WASHER
Model MVW7232HW0
Near Colorado Springs, CO 80913
Mathew
Job Details:
11/15/2023
"Found bad clutch, slider worn. Replaced both and test op, unit working as expected."
We serviced a
SAMSUNG REFRIGERATOR
Model RS28A500ASR/AA
Near Fountain, CO 80817
Mathew
Job Details:
11/15/2023
Replaced evap cover. Test op all okay.
We serviced a
JENNAIR RANGE
Model JDRP436HM00
Near Colorado Springs, CO 80908
Jerimiah
Job Details:
11/15/2023
Installing replacement console bullnose. Unit check ok.
We serviced a
WHIRLPOOL WALLOVEN
Model WOD77EC0HS20
Near Colorado Springs, CO 80924
Jerimiah
Job Details:
11/15/2023
Installed replacement harness. Unit check ok.
We serviced a
JENNAIR RANGE
Model S161
Near Colorado Springs, CO 80907
Jerimiah
Job Details:
11/15/2023
"Downdraft vent on high doesnt run, but runs on low. Parts are unavailable for unit, helped replace cavity light bulb. Unit check ok. Charged service call $150.00 cash"
We serviced a
SAMSUNG MICROWAVE OVEN
Model ME19R7041FS/AA
Near Fountain, CO 80817
Mathew
Job Details:
11/15/2023
"Replaced hvc and magnetron. Tested op with water, all okay."
We serviced a
MAYTAG WASHER
Model MVW4505MW0
Near Colorado Springs, CO 80923
Aaron
Job Details:
11/15/2023
"Removed and replaced gearcase, drive pulley, and belt. Tested unit through diagnostics, working well now. Customer unavailable to obtain signature or advise of survey."
We serviced a
KITCHENAID DISHWASHER
Model KTDM404KPSO
Near Colorado Springs, CO 80920
Jessie
Job Details:
11/15/2023
Took drain pump out of the unit. Cleaned and found glass. Put back together and ran vinegar. Pump is running well
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHW04
Near Pueblo West, CO 81007
David
Job Details:
11/15/2023
"Replaced diffuser Ran diagnostics, and all is running as it should"
We serviced a
WOLF RANGE
Model DF304
Near Colorado Springs, CO 80909
Roman
Job Details:
11/15/2023
Installed new selector switch and tested the range. Tried all the cycles and they are where they are supposed to be. Oven working great. Lowered labor to $199.95 instead of $229.95 paid cc
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHZ08
Near Colorado Springs, CO 80923
Jessie
Job Details:
11/15/2023
Replaced evap and Drier. Put on service valve. Ran pump abd charged r600. Monitored unit. All ok unit is in a garage. Showed customer requirement to make this unit work properly.
We serviced a
SAMSUNG DRYER
Model DVE50R5200W/A3
Near Colorado Springs, CO 80921
Brandon
Job Details:
11/15/2023
"Error c80, recommend cleaning vent, found bad thermostat 2, replaced heater assy and tested op all ok hass passed"
We serviced a
WHIRLPOOL RANGE
Model WFG320M0MS0
Near Los Lunas, NM 87031
Larry
Job Details:
11/15/2023
Installed parts listed and tested good - Unit is good to go
We serviced a
WOLF WALLOVEN
Model D030U/S
Near Pueblo, CO 81001
James
Job Details:
11/15/2023
installed ordered part tested ops all ckok collected 205.95 $205.95 CC Auth# 39NK9J
We serviced a
MAYTAG DRYER
Model MEDB835DW4
Near Fountain, CO 80817
Carlos
Job Details:
11/15/2023
Installed repair kit ran test op all ok
We serviced a
CAFE REFRIGERATOR/TOP
Model CVE28DP2NBS1
Near Glenwood Springs, CO 81601
Erik
Job Details:
11/15/2023
install part/test:connect to smartHQ service:isolate fan test: GOOD - normal noise CX confirmsJOB COMPLETE
We serviced a
CAFE REFRIGERATOR
Model CVE28DP2NS1
Near Snowmass Village, CO 81615
Erik
Job Details:
11/15/2023
install inverter and test: Compressor starts!connect to smartHQ service:temps starting to drop FF evap first zone active - set temps at 37 and 0 FF and FZ evap respectivelyCX advised to wait 24 hours before moving food into unitJOB COMPLETE
We serviced a
BOSCH DISHWASHER
Model SHV53CM3N/01
Near Aspen, CO 81611
Erik
Job Details:
11/15/2023
CX must use rinse aid ALWAYS no dry assist fan or zeolite systemdoor adjusted for tensionJOB COMPLETE
We serviced a
WHIRLPOOL WASHER
Model WTW8127LC1
Near Isleta Village Proper, NM 87022
Larry
Job Details:
11/15/2023
Installed valve and tested good - unit is good to go
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ1
Near Isleta Village Proper, NM 87022
Larry
Job Details:
11/15/2023
CX complaint - Not draining - Inspected unit and found the drain pump failed - Replaced with pre-id part and tested good - Unit is good to go
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS05
Near Los Lunas, NM 87031
Larry
Job Details:
11/15/2023
Installed parts listed and tested good - Unit is good to go
We serviced a
SAMSUNG REFRIGERATOR
Model RF265BEAESG/AA
Near Pueblo, CO 81005
James
Job Details:
11/15/2023
installed ordered parts all ops test good advised cust 24/48 hrs for ice production
We serviced a
WHIRLPOOL RANGE
Model KFGD500EWH04
Near Belen, NM 87002
Larry
Job Details:
11/15/2023
CX complaint - F6E1 - Inspected unit and found the control failed - CX doesn't want to bear the cost of repair - collected SC unit will need control $398.88
We serviced a
GE DISHWASHER
Model GDF550PSR6SS
Near Pueblo, CO 81008
David
Job Details:
11/15/2023
Replaced drain hose Tested and draining good
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS01
Near Colorado Springs, CO 80919
Glenn
Job Details:
11/15/2023
"Wrong switch ordered?! Customer had since obtained his own door switch & installed it. His part was correct, however; did not resolve the issue. currently the dispenser does not work, all lights are off, door ajar light not working when doors are opened. Found Deli Drawer UI not working. Disconnected Deli UI, cycled power, and dispenser came back to life. Suggest replace harness for Deli drawer. Estimate: Harness - W11170612 $103.34 , UI - WPW10769076 $343.30 , Tax $59.74 , MPS $14.50 , Labor $349.95 (2 hours minimum to complete this job) Also quoted new RS Door Gasket - W10846057 $281.86 , Customer Declined Estimate for now. Paid SC fee of $99.95 , Autho# C93RWU"
We serviced a
MAYTAG WASHER
Model MVW7232HW0
Near Pueblo West, CO 81007
James
Job Details:
11/15/2023
"installed ordered parts. calibrated unit & tested ops, all ckok"
We serviced a
GE WASHER-DRYER COM
Model GUD24ESSM1WW
Near Aspen, CO 81611
Erik
Job Details:
11/15/2023
install parts on site/test: GOODJOB COMPLETE
We serviced a
GE REFRIGERATOR
Model QHE16HYPAFS
Near Basalt, CO 81621
Erik
Job Details:
11/15/2023
install/test: damper control activeJOB COMPLETE
We serviced a
MAYTAG WASHER
Model MVW7230HW0
Near Gypsum, CO 81637
Antonio
Job Details:
11/15/2023
Installed new acu unit tested good
We serviced a
WHIRLPOOL WALL OVEN
Model WOD51EC0AS01
Near Colorado Springs, CO 80908
Aaron
Job Details:
11/14/2023
"Thermal fuse and control are shorted out, control allows fans to come on, but is not sending power to the elements. Needs control and thermal fuse.Control w10803217 $278.11Thermal fuse wpw10545291 $62.08Total job $340.19Tax $27.90Supplies $14.50Hc $129.95Labor $239.95?2= $479.90Total job$992.4430 day estimate No return on parts Auth $129.95 hc #49EEVV"
We serviced a
SAMSUNG OVEN
Model NE63B8611SS/AA
Near Colorado Springs, CO 80925
Jerimiah
Job Details:
11/14/2023
"Installed replacement induction fans, unit check ok."
We serviced a
MAYTAG WASHER
Model MHW8630HW0
Near Colorado Springs, CO 80908
Aaron
Job Details:
11/14/2023
"Removed and replaced pump and drawer assemblies, tested unit and working well now. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAHZ0
Near Colorado Springs, CO 80917
Glenn
Job Details:
11/14/2023
"Upper rack adjusters are broken.ADJUSTER - W10712395 $86.06 X2 = $172.12 , Tax $14.11 , MPS $14.50 , Labor $189.95 , Declined Estimate, Paid SC fee of $129.95 + Tip $6.50 = $136.45 , Autho# YU344U"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT518SZFM02
Near Colorado Springs, CO 80910
Carlos
Job Details:
11/14/2023
Installed door all ok
We serviced a
MAYTAG WASHER
Model MVW6230HW3
Near Colorado Springs, CO 80905
Carlos
Job Details:
11/14/2023
Installed door latch and striker ran test op all ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ04
Near Colorado Springs, CO 80903
Carlos
Job Details:
11/14/2023
"Installed evaporator fan and damper, runs all ok"
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ0
Near Colorado Springs, CO 80923
Aaron
Job Details:
11/14/2023
"Removed and replaced control, tested and working well now. Advised customer of 5 star survey."
We serviced a
THERMADOR RANGE
Model RDDS30VRS
Near Colorado Springs, CO 80906
Jerimiah
Job Details:
11/14/2023
Installed replacement bake element. Unit check ok charged labor as quoted $199.45 CC Auth# 3AX934
We serviced a
SAMSUNG REFRIGERATOR
Model RF323TEDBSR/AA 06
Near Pueblo West, CO 81007
Brandon
Job Details:
11/14/2023
"Bottom ice maker issue, not covered under extended warranty, cx asked to cancel"
We serviced a
WHIRLPOOL WALLOVEN
Model WOD51EC0AS00
Near Colorado Springs, CO 80922
Aaron
Job Details:
11/14/2023
"Removed and replaced thermostat and thermal fuse, programmed board and tested both oven cavities at 350f, heating and working well now. Auth remaining balance $249.95 #44CH4R"
We serviced a
MAYTAG DRYER
Model MED7230HW2
Near Pueblo West, CO 81007
David
Job Details:
11/14/2023
Replaced heater and thermostats Tested and working good
We serviced a
MAYTAG WASHER
Model MVW5430MW0
Near Colorado Springs, CO 80909
Carlos
Job Details:
11/14/2023
"Ran test op found debris stuck on drive pulley, removed debris, replaced capacitor ran test op all ok"
We serviced a
WHIRLPOOL RANGE
Model KSGG700ESS1
Near Rifle, CO 81650
James R
Job Details:
11/14/2023
Replaced electronic control. Reassembled and test operation. Bake and broil. Display is working. Customer paid Labor $149.95 auth code. E4EX3V
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT318FZDM09
Near Carbondale, CO 81623
James R
Job Details:
11/14/2023
replaced F. F. and Frz door seals. Former seals to seal. ok.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF757SDHZ04
Near Santa Fe, NM 87507
Jason
Job Details:
11/14/2023
installed parts unit checks ok
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Santa Fe, NM 87507
Jason
Job Details:
11/14/2023
installed parts unit checks ok
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS05
Near Santa Fe, NM 87508
Jason
Job Details:
11/14/2023
checked unit found water flow seems to be normal at this point
We serviced a
SAMSUNG RANGE
Model NE58K9500SG/AA
Near Colorado Springs, CO 80904
Jerimiah
Job Details:
11/14/2023
"Unit shutting off and resetting over time during low cook temp cycles, found weak TCO, replaced. Unit check ok. Charged SC part MPS labor. $337.68 CC Auth# JV394J; used 1 DE47-20037A (Tco) from stock"
We serviced a
THERMADOR FRENCH DOOR REFR
Model T36IB905SP/20
Near Avon, CO 81620
Erik
Job Details:
11/14/2023
replace inlet vslve and control valve to IM asm/ test: GOOD(PASS) reinstall unit/ test again: PASSJPOB CO MPLETE
We serviced a
SAMSUNG GAS RANGE
Model NY63T8751SS/AA
Near Colorado Springs, CO 80917
Jerimiah
Job Details:
11/14/2023
Installed replacement fans. Unit check OK.
We serviced a
MAYTAG DRYER
Model MED6200KW1
Near Albuquerque, NM 87120
Larry
Job Details:
11/14/2023
CX complaint - Dryer making grinding noise - Inspected unit and found the blower wheel failed on the motor shaft - Replaced both from pre-id parts and tested good - Unit is good to go
We serviced a
WHIRLPOOL WASHER
Model WTW5010LW0
Near Albuquerque, NM 87120
Larry
Job Details:
11/14/2023
CX complaint - Not spinning/wet clothes - Inspected unit and found OOB errors Suspension checks fine - Explained to cx the issue is user caused and not covered by warranty - CX says she is not paying - Called tech line to document (SR-7737794396)
We serviced a
WHIRLPOOL WALLOVEN
Model WOC54EC0HS04
Near Albuquerque, NM 87120
Larry
Job Details:
11/14/2023
CX complaint - Oven not working properly - Inspected unit and found F1E0 and F1E1 - Unit will need UI and ACU - CX does not want to bear the cost of repair and will replace unit - Collected SC
We serviced a
MAYTAG WASHER
Model MVW7230HW0
Near Los Ranchos de Albuquerque, NM 87107
Larry
Job Details:
11/14/2023
CX complaint - Washer not draining - Inspected unit and found wire harness to the pump torn - Repaired harness and tested good - Unit is good to go
We serviced a
WHIRLPOOL RANGE
Model WEG750H0HV0
Near New Castle, CO 81647
James R
Job Details:
11/14/2023
Found a heat shield covering vents on sides of botom plate above bake burner. Removed and started unit. Set to 475 degrees. let it do its thing.Has reached operating temperature. Let cycle on and off several times. Operation is normal. Customer paid service call $149.95 auth code 3KNL3Nsigned waiver.Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
SAMSUNG REFRIGERATOR
Model RF23M8570SG/AA
Near Colorado Springs, CO 80924
Jessie
Job Details:
11/14/2023
"Error 40c ice room fan error on display. Errors c71fl freezer abnormal temps,c41 main panel comm error, and c39 im function error. All fans are working. Unit has a sealed system leak. Customer not able to provide pop and reaching out to seller. Da96-00631g evap Da96-01002b evapNf54k9151ame01 compressorDa81-06007b dryerDa81-01184a process stubUnit is a 4 hour job r 600 is repair goes through"
We serviced a
WHIRLPOOL RANGE
Model KSGG700ESS1
Near Rifle, CO 81650
James R
Job Details:
11/14/2023
Printed labels. Took pics ready to send.
We serviced a
MAYTAG WASHER
Model MHW6630HW3
Near Divide, CO 80814
Mathew
Job Details:
11/14/2023
Cleared drain trap. Test op all okay.
We serviced a
WHIRLPOOL WASHER
Model CAE2745FQ1
Near Colorado Springs, CO 80909
Roman
Job Details:
11/14/2023
Talked with my CSR and it is a warranty job
We serviced a
WHIRLPOOL WASHER
Model MHW5630HC2
Near Pueblo, CO 81005
David
Job Details:
11/14/2023
"Ran diagnostics Test 1 is for the cold water valve, but the hot water valve is being activated Called tech line. File number 77377796774Bad control board and hot water valve Ck is going to talk it over with each other on what they want to do."
We serviced a
KITCHENAID REFRIGERATOR
Model KBSD708MSS00
Near Colorado Springs, CO 80906
Jessie
Job Details:
11/14/2023
Pulled top control panel and evap panel. Turned unit on. Customer had unit off when I arrived. Got on phone with jonathen.Jonathan. sr#7736821311
We serviced a
GE WASHER
Model PTW600BSR1WS
Near Pueblo, CO 81004
David
Job Details:
11/14/2023
Replaced lid lock and bezel Tested and is working great
We serviced a
KITCHENAID WALLOVEN
Model KOSE500ESS20
Near Colorado Springs, CO 80919
Glenn
Job Details:
11/14/2023
Install New Sensor & Console. All OPS Test:OK
We serviced a
BOSCH FRENCH DOOR REFR
Model B36CL80ENS/09
Near Colorado Springs, CO 80919
Kris
Job Details:
11/14/2023
installed door all ok
We serviced a
BEKO WALL OVEN
Model WOS30200SS
Near Colorado Springs, CO 80921
Kris
Job Details:
11/14/2023
specialty appliance is reaching out to beko for door replacement. cosmetic flaw on door.
We serviced a
WOLF RANGE
Model GR366
Near Colorado Springs, CO 80919
Ralph
Job Details:
11/14/2023
"CUST WORRIED ABOUT THE IGNITOR, MADE AN ADJUSTMENT TO THE CONTACT OF THE IGNITOR AND UNIT IS IGNITING BETTER NOW"
We serviced a
SPEEDQUEEN WASHER
Model ATEE9AGP173TW01
Near Colorado Springs, CO 80915
Roman
Job Details:
11/14/2023
Ran the washer and it shows an error code for no fill. Checked the drain pump and filters in the hot and cold inlet valve. Cold had a lot of calcium build up. Cleaned it out and connected hoses and tested it and no water is coming in the tub and inlet valve is getting volts. Checked the water supply and there is no water coming through the pipes. Paid sc $149.95 CC Auth# 44E9F3
We serviced a
THERMADOR GAS RANGE
Model PCG486WD/02
Near Colorado Springs, CO 80921
Kris
Job Details:
11/14/2023
cx complaint griddle does not heat evenly. called techline unit has a hot spot on it per techline let unit heat up its only 120 volt unit will not heat to 500 degrees.
We serviced a
GE RANGE
Model CGS750P2M3S1
Near Colorado Springs, CO 80907
Roman
Job Details:
11/14/2023
Ran the lower oven to 350 and the error came on at 250 degrees. Noticed the cooling fan was not running. Checked the fan and it just seemed like there was grease build up on it. Ran both of the ovens and cooling fan kicked on and both got to temp without error code. Recommend replacing the cooling fan and speed sensor. Cx going to wait on repair. Cooling fan #WB26X35086 $169.10Speed sensor #WB27X28659 $70.11Tax $19.62Parts total $258.83MPs $14.50Labor $229.95Sc $129.95Total cost $633.23Paid sc cc $129.95 CC Auth# RHFV9M
We serviced a
GE DRYER
Model GFD55ESSN1WW
Near Colorado Springs, CO 80907
Roman
Job Details:
11/14/2023
Tested the dryer and it will not heat up. Checked the voltage and the dryer is only getting 78V recommend calling an electrician to check the wiring. Dryer should work fine after that
We serviced a
SUBZERO REFRIGERATOR
Model 590
Near Colorado Springs, CO 80907
Ralph
Job Details:
11/14/2023
REPLACED COMPRESSOR AND CUST TO MONITOR
We serviced a
SUBZERO REFRIGERATOR
Model BI-42UFDID/S/PH
Near Colorado Springs, CO 80906
Ralph
Job Details:
11/14/2023
"REPLACED PART, CUST TO MONITOR"
We serviced a
COVE DISHWASHER
Model DW2450
Near Colorado Springs, CO 80924
Jessie
Job Details:
11/14/2023
Replaced listed parts. Ran unit for full quick wash no leaks. All ok
We serviced a
CAFE MICROWAVE
Model CEB515P4N1WM
Near Colorado Springs, CO 80906
Roman
Job Details:
11/14/2023
"Turned the display on by setting the clock, ran the microwave and could not get an error code to pop up. Cx stating error code is PF (power failure) cx had house required and had a new breaker box installed. Recommend changing out the breaker for the microwave."
We serviced a
FRIGIDAIRE MICROWAVE
Model 654654654
Near Colorado Springs, CO 80920
Kris
Job Details:
11/14/2023
ran test op found magnatron burned and channel burned cx does not want to repair.
We serviced a
MAYTAG WASHER
Model MVW6230HW2
Near Monument, CO 80132
Glenn
Job Details:
11/14/2023
"Error: Turn Knob to selct cycle, Knob not registering with contriol. Techline:Bulletin: W11436354 Suggest take UI apart from console. Reseat ribbon cable from turn knob to control. Reseated ribbon cable, all OPS Test:OK , SR# 7737794834 , Paid SC fee of $149.95 , WP is paying labor (As confirmed w/ Tabitha in Office) Paid via check #2610 , Autho#9PKE9U"
We serviced a
ELECTROLUX WASHER FRONT LOA
Model ELFW7637AW1
Near Colorado Springs, CO 80906
Roman
Job Details:
11/14/2023
Removed old drive belt and installed new one. Tested the washer and made it agitate and spin. Washer working great. Paid labor $229.95 CC Auth# U49F3U
We serviced a
SPEEDQUEEN DRYER ELECTRIC
Model ADEE9RYS177TW01
Near Colorado Springs, CO 80920
Kris
Job Details:
11/14/2023
unit has black substance melted on air vent. cautioned cx of checking pockets before drying.
We serviced a
SAMSUNG REFRIGERATOR
Model RF28JBEDBSR/AA
Near Pueblo, CO 81007
Brandon
Job Details:
11/14/2023
Replaced ice maker parts and tested op all ok hass passed
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Colorado Springs, CO 80921
Glenn
Job Details:
11/14/2023
"Unit makes noise during operation. Found loose Cam Nut on Splutch pulley. Tighten Nut on Cam Pulley, All OPS Test:OK , If problem returns, suggest order splutch kit."
We serviced a
INSINKERATOR GARBAGE DISPOSAL
Model BADGER 5XL-1
Near Fountain, CO 80817
Roman
Job Details:
11/14/2023
"Tested the old disposal, sounds very bad and motor vibrating a lot. Removed the old disposal and installed new one. Checked for leaks and tested it. Disposal working great and tested the dw. Dw draining great."
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Colorado Springs, CO 80921
Glenn
Job Details:
11/14/2023
"making screetching noise. Found loose Support Roller at LR Bulkhead. Install New Retaining clip. All OPS Test:OK , If problem returns, suggest order LR Shaft & Roller."
We serviced a
WHIRLPOOL WASHER
Model MVW7232HW0
Near Peyton, CO 80831
Aaron
Job Details:
11/14/2023
"Removed and replaced dispenser switch and washplate, working well now. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS335SDHM06
Near Colorado Springs, CO 80921
Glenn
Job Details:
11/14/2023
"Install New Icemaker & Main PCB. Had to swap old arm off bad IM and Install it on new IM, as it was bent and causing a problem. Cycle Test IM > Pass. All OPS Test:OK"
We serviced a
ILVE RANGE
Model UM90FMP/RBX
Near Colorado Springs, CO 80922
Jessie
Job Details:
11/14/2023
Unit has proper voltage. Oven no op. 120v to each left. Tstat not closing and elements not getting 240v. Unit has a bad safety and selecter. Called euro chef who was in charge in ilve and was informed they no longer do. Gave me number 7182491215 to ilve usa. They informed me that they will not help unless it's under warranty and we have a Sr. No parts online and no support. Was told to walk away at this point.
We serviced a
SAMSUNG DRYER
Model DVE45T3400P/A3
Near Pueblo West, CO 81007
Brandon
Job Details:
11/14/2023
"Found belt disconnected from pulley, reconnected belt and tested op all ok hass passed"
We serviced a
SAMSUNG DRYER
Model DVE50R5400V/A3
Near Colorado Springs, CO 80915
Kris
Job Details:
11/14/2023
ran test op checked power pulled unit apart and found bad heating element. element 133.00 dc47-00019a
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Colorado Springs, CO 80911
Carlos
Job Details:
11/14/2023
Installed heater and cutoff advice cx to have vents cleaned and hose replaced.
We serviced a
SAMSUNG REFRIGERATOR
Model RF28R7201SR/AA
Near Colorado Springs, CO 80918
Glenn
Job Details:
11/14/2023
Install New Icemaker & Auger Assy. Cycle Test IM > PassAllow 48-72 hours for ice production. All OPS Test:OK
We serviced a
SAMSUNG WASHER
Model WF45R6100AC/US
Near Colorado Springs, CO 80906
Mathew
Job Details:
11/13/2023
"Dc1 dc. Tested door switch, tested ok. Cleared drain pump, test op, unit working as expected. $129.95 CC Auth# 3C9RV9"
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Albuquerque, NM 87110
Jason
Job Details:
11/13/2023
Installed part unit checks ok
We serviced a
SAMSUNG DRYER
Model DVE55A7300E/A3
Near Colorado Springs, CO 80921
Brandon
Job Details:
11/13/2023
"Belt came off pulley, put belt back on and tested op all ok"
We serviced a
WHIRLPOOL REFRIGERATOR
Model GT2SHMXMS04
Near Colorado Springs, CO 80917
Kris
Job Details:
11/13/2023
fc temp@44.2 rc temp@52.0 unit has no frost pattern bad compressor. cx does not want to repair.
We serviced a
SUB ZERO REFRIGERATOR
Model 211RFD
Near Colorado Springs, CO 80906
Ralph
Job Details:
11/13/2023
"cleaned cond and cust to monitor, cust aid total bill autho no. hx3mja"
We serviced a
WHIRLPOOL WASHER
Model WED8000BW0
Near Colorado Springs, CO 80921
Jessie
Job Details:
11/13/2023
Unit control is broken. Control#wpw10566876 $262.84Tax $21.552nd sc $89.95Msrp$14.50Labor $149.95Total $538.79No return on parts 30 days estimate
We serviced a
SUB ZERO ICE MACHINE
Model UC151
Near Colorado Springs, CO 80906
Jessie
Job Details:
11/13/2023
"Found leak under sink at p trap. Showed customer. Noticed debris in the drain line of icemachine, also drain is collapsing. Cut out portion of drain that is not good and cleaned up. Ran drain pump and full sink of water. All ok"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ04
Near Colorado Springs, CO 80922
Roman
Job Details:
11/13/2023
Installed new door gasket on the ff left and right side. Installed new freezer door gasket and made sure all were sealing properly. Fridge working great.
We serviced a
WHIRLPOOL WASHER
Model CAE2745FQ1
Near Colorado Springs, CO 80909
Roman
Job Details:
11/13/2023
"Washer head board taken apart and having some language barrier issues finding screws. Put it back together. Turned the washer on and it started filling, agitating draining and spinning. Also noticed the drain line is 35 long and drains into another room. Recommend finding a different place to drain the water. Showed them where and it started back flowing and leaking. Hot water valve also was not open all the way. . Ran the washer again and showed them that it is advancingCx needs to call a plumber and get the plumbing fixed."
We serviced a
ASKO DISHWASHER
Model DBI664
Near Colorado Springs, CO 80919
Jessie
Job Details:
11/13/2023
Replaced ui. Test op. All ok
We serviced a
THERMADOR WALLOVEN
Model MCES/02
Near Colorado Springs, CO 80919
Jessie
Job Details:
11/13/2023
Replaced waveguide cover. Ran unit over and over. All ok