We serviced a
MAYTAG WASHER
Model MVW6230HW3
Near Medford, OR 97501
Jeff
Job Details:
02/12/2025
Installed parts tested machine working as should
We serviced a
WHIRLPOOL WALL OVEN
Model WOC75EC0HS20
Near Jacksonville, OR 97530
Jeff
Job Details:
02/12/2025
Installed parts tested machine working as should tested to 350.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ08
Near Colorado Springs, CO 80922
Aaron
Job Details:
02/12/2025
"Ice maker is unable to complete harvest estimate cycle, removed and replaced ice maker assembly, tested unit through harvest cycle, working well now, FC temperature is good. Advised customer of 5 star survey."
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF577KPS02
Near Monument, CO 80132
Dvante
Job Details:
02/12/2025
"Checked unit, found the noise but had to call tech support to confirm where the noise is coming from. Couldnt replicate the noise. Its very intermittent. Did move the unit away from the leak detector they have on the left side of unit. No noises couldnt be replicated. Customer will call manufacturer if noise happens againSR7740943474"
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Colorado Springs, CO 80903
Carlos
Job Details:
02/12/2025
Installed terminal & wires runs all ok
We serviced a
WHIRLPOOL DRYER
Model WGD8127LC3
Near Colorado Springs, CO 80923
Aaron
Job Details:
02/12/2025
"Removed and replaced coil pack, tested unit on both regular normal and timed dry cycles, unit is lighting and heating well now, temperatures are good, placed unit in best spot to allow best airflow. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT511SZDM02
Near Colorado Springs, CO 80921
Dvante
Job Details:
02/12/2025
"Checked unit, found the handle cracked. Replaced the handle. Door is opening properly."
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Colorado Springs, CO 80909
Carlos
Job Details:
02/12/2025
Ran calibration cycle and multiple tests. Advices cx to not mix many fabrics and to use proper loading in unit.
We serviced a
MAYTAG WASHER
Model MVW6500MBK0
Near Colorado Springs, CO 80923
Aaron
Job Details:
02/12/2025
"Removed and replaced components, tested unit through diagnostics, working well now, discussed temperature issues that can arise from washer in the garage with the customer. Advised customer of 5 star survey."
We serviced a
MAYTAG WASHER
Model MVW5430MW1
Near Colorado Springs, CO 80904
Carlos
Job Details:
02/12/2025
"Called techline 7740938994 Installed capacitor, ran a calibration cycle"
We serviced a
KITCHENAID RANGE
Model KFEG500ESS7
Near Colorado Springs, CO 80921
Dvante
Job Details:
02/12/2025
"Checked unit, found the noise coming from convection fan motor. Replaced the convection fan. Tested unit, fan isnt noisy. Unit is operating as designed."
We serviced a
WHIRLPOOL RANGE
Model WFE550S0LZ2
Near Colorado Springs, CO 80922
Aaron
Job Details:
02/12/2025
"Customer states they burnt their arm on the top of oven cavity when putting a dish into oven, oven gasket out at three points, corrected and tested unit, heating well, temperatures are good. Discussed situation with safety and recorded, no further recommendations. Advised customer of situation and survey."
We serviced a
WHIRLPOOL WASHER
Model CAE2745FQ2
Near Colorado Springs, CO 80909
Carlos
Job Details:
02/12/2025
"7740944058 Called techline unit is not stored in any weather control storage. No water coming from the supply lines, they are frozen installation guide lines state (Do not install or store the washer where it will beexposed to the weather. Do not store or operate the washer intemperatures at or below 32?F (0?C). Some water can remain inthe washer and can cause damage in low temperatures. Properinstallation is your responsibility.You will need:// A water heater set to 120?F (49?C).// A grounded electrical outlet located within 4 ft (1.2 m) ofpower cord on back of washer. See ElectricalRequirements.n Hot and cold water faucets located within 4 ft (1.2 m) of hotand cold water fill valves on washer, and water pressure of20-100 psi (138-690 kPa). A pressure reduction valve shouldbe used in the supply line where inlet pressure entering thebuilding exceeds 100 psi (690 kPa) to avoid damage to thewasher mixing valve.)Units are stored in a shed and it is currently 7 degrees inside shed."
We serviced a
WHIRLPOOL DRYER
Model WED5010LW1
Near Colorado Springs, CO 80909
Carlos
Job Details:
02/12/2025
Installed switch and fuse runs all ok
We serviced a
KITCHENAID COMPACTOR
Model KTTS505ESS2
Near Aspen, CO 81611
Sean
Job Details:
02/12/2025
Checked unit MN SN popCustomer signed disclaimer Checked unit found that the start button was stuck against the frame. So I adjusted it.Tested unit good.Please fill out a tech survey.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ02
Near Pueblo, CO 81008
Domingo
Job Details:
02/12/2025
Replaced board and ice maker ran a test and everything work
We serviced a
KITCHENAID DISHWASHER
Model KDPM604KPS0
Near Colorado Springs, CO 80921
Dvante
Job Details:
02/12/2025
"Checked unit, found the wash motor wasnt running. Replaced pump and motor assembly. Tested diagnostic mode, no leaks or error codes. Unit is operating as designed."
We serviced a
SAMSUNG REFRIGERATOR
Model RF28HMEDBSR/AA RFD
Near Woodland Park, CO 80863
Ralph
Job Details:
02/12/2025
cust to replace unit he used a hair dryer and melted the sides a little bit but unit would just keep freezing over.
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Albuquerque, NM 87108
Jason
Job Details:
02/12/2025
"Installed belt,cam,and cover unit opperation cheks okspoke to cx about review"
We serviced a
MAYTAG WASHER
Model MVW6230HW3
Near Los Lunas, NM 87031
Larry
Job Details:
02/12/2025
CX complaint - Not draining - Inspected unit and found the harness failed - Replaced with pre-id parts and tested good - Unit is good to go - Survey mentioned
We serviced a
WHIRLPOOL DRYER
Model WGD5010LW3
Near Albuquerque, NM 87112
Jason
Job Details:
02/12/2025
Installed parts listed ran timed dry unit oppereation checks ok. spoke to cx about review
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near Edgewood, NM 87015
Jason
Job Details:
02/12/2025
installed parts ran quick cycle unit opperation checks okspoke to cx about review
We serviced a
WHIRLPOOL WASHER
Model WTW4855HW3
Near Albuquerque, NM 87111
Jason
Job Details:
02/12/2025
Installed part ran calibration cycle unit opperation checks ok. spoke to cx about review
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX988SIBM01
Near Colorado Springs, CO 80920
Aaron
Job Details:
02/12/2025
"FC evaporator fan motor is shorted out, confusing and resetting unit, needs FC evaporator fan motor assembly. Approved onsite, removed and replaced motor assembly, tested unit through diagnostics, working well now, cleaned condenser coils, needs time to cool. Set temperatures to recommended settings. Evaporator fan motor $158.16Tax $12.97Supplies $14.50Hc $139.95Labor $229.95Total job $555.53No return on parts Auth total job $568.53 #3F9Y9K"
We serviced a
WHIRLPOOL DRYER
Model WED95HEDW0
Near Vail, CO 81657
Antonio
Job Details:
02/12/2025
Installed new dryer kit. Then ran a cycle for proper operation and unit tested good Also advised cx of whlp survey
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC704FPS00
Near Albuquerque, NM 87108
Jason
Job Details:
02/12/2025
Installed compressor charged unit up. pressures look hgood unit checks ok. spoke to cx about review
We serviced a
GE DRYER
Model GTDP200EF4WS
Near Colorado Springs, CO 80917
David
Job Details:
02/12/2025
"Checked dryer, rear bearing rusty, lubed. Top bearing and felt wearing out, good for now, may need replacing in the future. Quote in quick pics."
We serviced a
WOLF RANGE
Model DF48650G/s/p/lp
Near Sisters, OR 97759
Austin
Job Details:
02/12/2025
Installed rework kit. Tested unit all ops sat per factory.
We serviced a
SAMSUNG WASHER
Model WA49B5205AW/US
Near Colorado Springs, CO 80922
Brandon
Job Details:
02/12/2025
"Replaced PCB, has oqc passed"
We serviced a
SAMSUNG REFRIGERATOR
Model RF27CG5400SRAA
Near Colorado Springs, CO 80924
Brandon
Job Details:
02/12/2025
"Replaced evap cover, hass oqc passed"
We serviced a
JENN-AIR RANGE
Model JDRP536WP03
Near Rifle, CO 81650
James R
Job Details:
02/12/2025
Printed labels took pics ready to send.
We serviced a
BOSCH REFRIGERATOR
Model B20CS30SNS/05
Near Colorado Springs, CO 80908
Charles
Job Details:
02/12/2025
Ice dispenser was locked. Service fee $159.95 paid check#3067 autho 4F9TNV
We serviced a
JENN-AIR MICROWAVE
Model JMW3430DS01
Near Sisters, OR 97759
Austin
Job Details:
02/12/2025
Unit reset model number. Rest proper model number tested unit. All ops sat per factory spec.
We serviced a
MIELE COFFEE MACHINE
Model CVA7445
Near Colorado Springs, CO 80906
Scott
Job Details:
02/12/2025
found pump needed to be primed checked op okCRM installed filled and made one cup of coffee checked op ok advised about 5star review
We serviced a
PROFILE REFRIGERATOR
Model PYE22KSKKSS
Near Edwards, CO 81632
Erik
Job Details:
02/12/2025
install filter and fan asm test : connect to smartHQ service: heater - GOODFF fan/ deli fan - GOODJOB COMPLETE
We serviced a
DACOR DOUBLE WALL OVEN
Model ECS230SBK
Near Colorado Springs, CO 80904
Jerimiah
Job Details:
02/12/2025
"Upper broil and cavity lights not working. Broil not getting power, but element checks good, needs relay board. Part is unavailable, refused option of repairing board. Charging service call. $175.95 CC Auth# LWTX4YDE81-03753A transformer check terminalsDE81-08448A relay board NLA"
We serviced a
SAMSUNG WASHER
Model WF50K7500AV/A2
Near Colorado Springs, CO 80924
Brandon
Job Details:
02/12/2025
"Error 4c, unit would not stop filling with water, found hole in pressure hose for water level sensor, trimmed hose where hole was and tested operation all checks ok, svf paid $139.95 Auth# CF34P9"
We serviced a
JENNAIR ICE MACHINE
Model JIM158XYCX2
Near Aspen, CO 81611
James R
Job Details:
02/12/2025
Signed disclaimer. Replaced pump and pump assist kit. Test operation. Pumps came on for a bit and then quit pumping water. Control sensed issue and shut down. Also when Unit had water in it. Started to leak at tube that comes out of tub this is non repairable. Office will issue a credit for parts. Need to contact office. Please fill out tech satisfaction survey. Thank You.
We serviced a
WHIRLPOOL RANGE
Model WEE730H0DS0
Near Pueblo West, CO 81007
Domingo
Job Details:
02/12/2025
Replaced bake element test unit 1
We serviced a
GE DRYER
Model GFD85ESPN0RS
Near Colorado Springs, CO 80905
Jerimiah
Job Details:
02/12/2025
"Sears came and did a dryer clean, found felt seal of drum falling apart, Cust wanted quote on drum part. Will look for new unit. Labor would be $179.95 if chosen to do so. $153.95 CC Auth# CJL9CFDrum $643.51"
We serviced a
JENN-AIR WALL OVEN
Model JMW2430LL00
Near Colorado Springs, CO 80921
Charles
Job Details:
02/12/2025
"Installed listed part. Unit uninstalled, could not test."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF560SEHZ02
Near Los Lunas, NM 87031
Larry
Job Details:
02/12/2025
Installed parts listed and getting good heat transfer - Unit is operating as designed - Survey mentioned
We serviced a
PROFILE RANGE HOOD
Model PV970N2SS
Near Colorado Springs, CO 80916
Jerimiah
Job Details:
02/12/2025
installed replacement bulbs. Unit check ok
We serviced a
MONOGRAM RANGE
Model ZGP486NDT1SS
Near Colorado Springs, CO 80926
Jerimiah
Job Details:
02/12/2025
"Installed LP conversion, unit check ok."
We serviced a
GE DISHWASHER
Model GDF510PSR6SS
Near Monument, CO 80132
Charles
Job Details:
02/12/2025
"Unit will not drain, cpvc candy cane plugged with glue, remove restriction , drain water that was in unit, new home, main water off."
We serviced a
GE MICROWAVE OVEN
Model JVM3160RF9SS
Near Pueblo West, CO 81007
Domingo
Job Details:
02/12/2025
"Replace transformer, fuse, MGT, Diode, capacitor test it and it worked"
We serviced a
GE MICROWAVE
Model JT965SF3SS
Near Colorado Springs, CO 80906
Jerimiah
Job Details:
02/12/2025
"Microwave not heating making loud buzz noise when running, mag antennae is damaged but waveguide is ok. Cust holding off and will look for new unit labor will be $229.95 if chosen to do so, charging service call $139.95 CC Auth# EK4R9HWB27X10516 mag $441.91"
We serviced a
GENERAL ELECTRIC RANGE
Model JB630DF2WW
Near Colorado Springs, CO 80905
Jerimiah
Job Details:
02/12/2025
Installed replacement surface element. Unit check ok charged a or as quoted $241.95 CC Auth# 3NJVCA
We serviced a
JENN-AIR RANGE
Model JDRP548HL00
Near Bend, OR 97702
Levi
Job Details:
02/12/2025
"Replaced blower fan on left oven(small). Tested, all checks okay. No error codes found"
We serviced a
FRIGIDAIRE REFRIGERATOR
Model FFHB2740PS9A
Near Pueblo West, CO 81007
Domingo
Job Details:
02/12/2025
Replaced base water filter and housing test it no leaks total reminder 104.26 customer pay $46.26 on card and $58.00 cash authorization code 4c333E
We serviced a
WHIRLPOOL WALL OVEN
Model KOED530PPS00
Near Ashland, OR 97520
Jeff
Job Details:
02/12/2025
Called tech line. File 7740943791 we went through machine and found everything is working as should. Customer is going to get owners manual and practice.
We serviced a
KENMORE DRYER
Model 710.84821300
Near Cripple Creek, CO 80813
David
Job Details:
02/12/2025
"Replaced heater and thermal cut-off kit, unit is heating good."
We serviced a
BOSCH DISHWASHER
Model SHPM78Z55N/20
Near Beaver Creek, CO 81620
Erik
Job Details:
02/12/2025
install fan and conduit/ test: PASSE07 did NOT returnJOB COMPLETEservice collected on previous call BSH covered parts and labor
We serviced a
BOSCH DISHWASHER
Model SHP65CM5N/25
Near Vail, CO 81657
Erik
Job Details:
02/12/2025
install gasketJOBCOMPLETE
We serviced a
BLUESTAR COOKTOP
Model RGTNB486GV2
Near Colorado Springs, CO 80904
Jerimiah
Job Details:
02/12/2025
"Front right surface burner not igniting, found igniter misaligned, reseated burner pipe. Unit check ok."
We serviced a
LG REFRIGERATOR
Model LFXS26596S
Near Colorado Springs, CO 80911
Brandon
Job Details:
02/12/2025
"Sealed system issue, compressor is running but not removing heat, could not indetify a refrigerant leak, possible inefficient compressor or leak, paid cash $140, parts $738.78, labor $695.95, svf $139.95, mps $14.50, tax"
We serviced a
SUB ZERO REFRIGERATOR
Model 650
Near Colorado Springs, CO 80907
Ralph
Job Details:
02/12/2025
"shelf just needed to be tweeked a little,,,autho no. H39H9K"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ00
Near Pueblo West, CO 81007
Domingo
Job Details:
02/12/2025
Put drawer back in the way it should be and everything is working fine
We serviced a
MAYTAG WASHER
Model MVW7232HW0
Near Peyton, CO 80831
Aaron
Job Details:
02/12/2025
"Tub gasket is not fully engaged, allowing water to drip throughout cycle, corrected and monitored unit on quick wash deep fill high level to allow most pressure on gasket, working well now, no leaks, installed litmus strip and advised customer of survey."
We serviced a
BOSCH REFRIGERATOR
Model B36FD50SNS
Near Colorado Springs, CO 80923
David
Job Details:
02/12/2025
"Replaced icemaker, cx to keep an eye on it."
We serviced a
WHIRLPOOL DRYER
Model WED8127LC1
Near Colorado Springs, CO 80921
Dvante
Job Details:
02/12/2025
"Replaced control board and panel. Tested diagnostic mode, no error codes. Tested unit and unit isnt shutting off by itself. Unit is operating as designed."
We serviced a
CAFE DISHWASHER
Model CDT805P2NBS1
Near Colorado Springs, CO 80908
Charles
Job Details:
02/12/2025
"Replaced console and toe panel, lower unit so UI is not hitting mounting screws"
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS01
Near Socorro, NM 87801
Larry
Job Details:
02/12/2025
installed evap harness and tested good - unit is good to go - survey mention
We serviced a
SAMSUNG REFRIGERATOR
Model RF31FMESBSR/AA
Near Peyton, CO 80831
Brandon
Job Details:
02/11/2025
"Replaced sensor and tested operation all checks ok, labor paid $189.95 Auth# 3999UC"
We serviced a
KITCHENAID RANGE
Model KFDC506JSS04
Near Powell Butte, OR 97753
Austin
Job Details:
02/11/2025
Temp set to 350 actual temp on probe is 352.9. Middle knob falling off reinstalled tested unit. All ops sat per factory spec.
We serviced a
MAYTAG WASHER
Model MVW6230RHW1
Near Cave Junction, OR 97523
Jeff
Job Details:
02/11/2025
Found broken wires rewired and installed parts tested machine working as should.
We serviced a
WHIRLPOOL DISHWASHER
Model WDP730HAMZ0
Near Colorado Springs, CO 80905
Carlos
Job Details:
02/11/2025
"Cx has faulty GFCI, needs to replace, ran unit in different outlet, no issues"
We serviced a
MAYTAG DRYER
Model MED6230HC3
Near Colorado Springs, CO 80925
Carlos
Job Details:
02/11/2025
Installed terminal and wires all ok
We serviced a
MAYTAG WASHER
Model MVW6200KW3
Near Colorado Springs, CO 80922
Aaron
Job Details:
02/11/2025
"Capacitor is shorted out, break in lower harness, door latch assembly is shorted as well, removed and replaced components, tested unit through diagnostics, working well now. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL RANGE
Model WFE525S0JS4
Near Colorado Springs, CO 80924
Jerimiah
Job Details:
02/11/2025
"Unit trips breaker on anything past 200?. Unit hooked up to double 40A GFCI breaker. Unit pulling nearly 30A max. Removed ground wire, set unit to preheat to 500, allowed to sit for 12 minutes. Reconnected ground, tried again. Unit check ok. Disclosed survey to cust fcc 5star."
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Pueblo, CO 81001
Domingo
Job Details:
02/11/2025
Replace water valve test it not noise i ran a diagnostic mode and it passed
We serviced a
MAYTAG DRYER
Model MED7230HW3
Near Colorado Springs, CO 80922
Aaron
Job Details:
02/11/2025
"Cracked blower wheel rubbing against housing, removed and replaced, tested unit, working and heating well now. Advised customer of 5 star survey."
We serviced a
MAYTAG DRYER
Model MED7230HW3
Near Colorado Springs, CO 80922
Aaron
Job Details:
02/11/2025
"Heating element and thermostat are shorted out, removed and replaced components, corrected vent hose and placed for best airflow, tested unit, working and heating well now. Advised customer of situation and survey."
We serviced a
MAYTAG DRYER
Model MED6500MBK0
Near Colorado Springs, CO 80920
Dvante
Job Details:
02/11/2025
"Checked unit, found the unit is leaking while on steam cycle. Called tech support and was asked if the new valve was replaced which it was. Advised to tell customer that the load is too small and need to put more items in order for the steam cycle to operate properly.SR7740929640"
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Colorado Springs, CO 80925
Carlos
Job Details:
02/11/2025
Installed harness ran tests all ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT518SZFM04
Near Pueblo, CO 81001
James
Job Details:
02/11/2025
Installed ordered parts tested ops all ckok
We serviced a
MAYTAG WASHER
Model MVW6230RHW2
Near Colorado Springs, CO 80917
Aaron
Job Details:
02/11/2025
"F0E3 overload error upon arrival, found Capacitor shorted, pulley bent and broke actuator arm, removed and replaced components, tested unit through diagnostics, working well now, recommend standpipe to be cleared, and electrician for outlet as power cuts out with slight movement. Advised customer of situation and survey."
We serviced a
MAYTAG WASHER
Model MVW7230HW0
Near Colorado Springs, CO 80908
Aaron
Job Details:
02/11/2025
"Removed and replaced lower harness, tested unit through DLMS and diagnostic cycles, working well now. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL WASHER
Model WTW8127LC0
Near Colorado Springs, CO 80911
Carlos
Job Details:
02/11/2025
Installed wash plate all ok
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ0
Near Santa Fe, NM 87508
Jason
Job Details:
02/11/2025
Installed pump motor assy unit opperation checks ok. spoke to cx about review
We serviced a
WHIRLPOOL DRYER
Model WED5605MC0
Near Santa Fe, NM 87508
Jason
Job Details:
02/11/2025
installed motor unit opperation checks ok. spoke to cx about review
We serviced a
MAYTAG DRYER
Model MED6500MBK0
Near Albuquerque, NM 87114
Larry
Job Details:
02/11/2025
Installed harness and tested good - nit is good to go - Survey mentioned
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Albuquerque, NM 87120
Larry
Job Details:
02/11/2025
Installed parts listed and tested good - Unit is good to go - Survey mentioned
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW1
Near Los Lunas, NM 87031
Larry
Job Details:
02/11/2025
Cx complaint - Making loud gringing noise - Inspected unit and found the retainer nut fot the pulley loose - Secured nut and tested good - Unit is good to go - Survey mentioned
We serviced a
WHIRLPOOL WASHER
Model WET4027HW2
Near Galisteo, NM 87540
Jason
Job Details:
02/11/2025
Installed parts listed ran calibration and quick cycle unit operation checks ok. spoke to cx about review
We serviced a
KITCHENAID M/W OTR
Model KMMF530PPS00
Near Albuquerque, NM 87121
Larry
Job Details:
02/11/2025
installed door and tested good - unit is to go survey mentioned -
We serviced a
MAYTAG WASHER
Model MVW5430MW1
Near Santa Fe, NM 87507
Jason
Job Details:
02/11/2025
Installed part and repaired brocken drain pump harness unit opperation checks ok. spoke to cx about review
We serviced a
AMANA REFRIGERATOR
Model ABB1924BRM01
Near Breckenridge, CO 80424
Antonio
Job Details:
02/11/2025
Installed new acu and programmed. Turned unit on fridge is at 35? and frezzer at0? unit testing good also advised cx of whlp survey
We serviced a
AMANA DISHWASHER
Model ADB1400AGS3
Near Selma, OR 97538
Jeff
Job Details:
02/11/2025
Installed sump valve tested machine working as should no leaks
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS05
Near Grants Pass, OR 97526
Jeff
Job Details:
02/11/2025
"Found wiring wasn't right repaired back to factory, installed parts and ran diagnostic, passed all tested working as should as of now."
We serviced a
MAYTAG WASHER
Model MVW6230HW3
Near Albuquerque, NM 87121
Larry
Job Details:
02/11/2025
installed parts listed and tested good - unit is good to go - survey mentioned
We serviced a
KITCHENAID WALL OVEN
Model kode500ess20
Near Monument, CO 80132
Jerimiah
Job Details:
02/11/2025
Installed replacement TCO. Unit check ok. Charged labor as quoted $229.95 CC Auth# 3J3H9K
We serviced a
GE DISHWASHER
Model GSD2600G00WW
Near Colorado Springs, CO 80905
David
Job Details:
02/11/2025
"Replaced pump motor assembly, ran dishwasher, no leaks. Leak strip."
We serviced a
BOSCH DISHWASHER
Model SHE43F16UC/ 60
Near Colorado Springs, CO 80906
David
Job Details:
02/11/2025
"Buttons not working correctly. Order of buttons not correct, put buttons in the correct order, tested and is operating correctly."
We serviced a
BOSCH DISHWASHER
Model SHPM65Z55N/01
Near New Castle, CO 81647
Sean
Job Details:
02/11/2025
Checked unit MN SN POP Customer signed disclaimer Pulled unit out and removed the door.Removed the front panel and the door seal.Installed new door seal and reassembled the unit.Removed the door gasket and cleaned the unit It had a significant amount of water deposits around the door seal and door gasket. Took pictures.Installed new door gasket and tested the unit ran a rince cycle. Unit did not leak.Total for visit is Labor $ 190.45 MPS. $17.00Total is $207.45Ashley will call and pay.
We serviced a
MAYTAG WASHER
Model LSG7806AAE
Near Aspen, CO 81611
James R
Job Details:
02/11/2025
Signed disclaimer. Removed front panel. Found fuse blown. Removed top checked lid switches they are good. Unit had gotten out of balance and popped fuse. Installed fuse and test opersating as should. Customer paid $169.95 auth code. 9X3VX4Please fill out tech satisfaction survey. Thank You.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX986SIHV00
Near Silt, CO 81652
James R
Job Details:
02/11/2025
Signed disclaimer. Test 56 E2 Icemaker fill tube frozen shut heater test 19 123 vac good amperage .80 good. Ohm reading 4.84 Replaced icemaker fan. Sealed cover of icemaker and fan taped cover really well. Reassembled and installed. Cut pwr to unit and reset. This cleared error code of icemaker. Put unit into diagnostics icemaker harvest test all checked good. Icemaker fill test all checked good. Checked icemaker thermistor checked ok. Checked ice bin sensors checked good. Checked function of icemaker fan ok. Checked icebox thermistor checked ok. Seals good on ice door. Please fill out tech satisfaction survey. Thank You.
We serviced a
SAMSUNG REFRIGERATOR
Model RF23J9011SG/AA
Near Colorado Springs, CO 80904
Mathew
Job Details:
02/11/2025
"Found iceroom frozen. Defrosted. Dried and sealed room. Installed icemaker, clips, new bin, drain tube and control. Test op on ice cycle. All okay."
We serviced a
SAMSUNG RANGE
Model NA30N6555TS/AA
Near Colorado Springs, CO 80924
Jerimiah
Job Details:
02/11/2025
Unit intermittently having electrical smell when operating center burner only. Was not able to reproduce smell. Replaced components believing that could be the only place to emanate the smell. Cust will keep track of problem if it happens again.
We serviced a
SAMSUNG REFRIGERATOR
Model RF28R7351DT/AA
Near Peyton, CO 80831
Brandon
Job Details:
02/11/2025
Replaced all parts and cycled ran hass but it failed