We serviced a
WOLF COOKTOP
Model CT36G/S
Near Colorado Springs, CO 80919
Jessie
Job Details:
11/27/2023
Found igniter grounding out against chasis. Fixed connection all ok
We serviced a
SAMSUNG REFRIGERATOR
Model RT16A6195SR/AA
Near Colorado Springs, CO 80903
Ralph
Job Details:
11/27/2023
"units compressor not running, called tech support, and they suggested that with the testing that is being performed that unit will need a new main board,mdontrol board PN DA92-01443E main board, CUST NOT REPAIRING AT THIS TIME. AUTHO NO. 93K3L9"
We serviced a
GE REFRIGERATOR
Model DFE28JMKBES
Near Colorado Springs, CO 80909
Roman
Job Details:
11/27/2023
"Fridge not plugged in or running,plugged in to test fans and compressor, all okay, checked the drain line and the line in the back had build up inside it. Recommend cleaning the condenser coils and cleaning out the drain tube. Temp sensor wasnt on the capillary and zip tied it down to make sure fridge is getting proper temp readings.Sc 129.95Labor $189.95Paid $319.90cc $319.90 CC Auth# 4P9TCU"
We serviced a
WHIRLPOOL DISHWASHER
Model WDF518SAHM
Near Vail, CO 81657
Antonio
Job Details:
11/27/2023
Installed new door seal and leveled out unit until tested good
We serviced a
SAMSUNG REFRIGERATOR
Model n/a
Near Colorado Springs, CO 80921
Mathew
Job Details:
11/27/2023
"Part is NLA, called Cx to tell them the bad news."
We serviced a
AMANA REFRIGERATOR
Model AFD2535DES
Near Colorado Springs, CO 80919
Ralph
Job Details:
11/27/2023
"found ice holding the fingers, removed obstruction and unti checked okay,,,autho no. C4433M"
We serviced a
WHIRLPOOL WASHER
Model WFW97HEDU0
Near Edwards, CO 81632
Antonio
Job Details:
11/27/2023
Installed new ui panel unitvtested good Lb$189.95Tp$17.650$207.45 CK Auth# 99N9PT
We serviced a
MAYTAG DRYER
Model MDE5500AYW
Near Colorado Springs, CO 80919
Brandon
Job Details:
11/27/2023
"Unit is squealing, checked all components, need drive belt, rollers and pulley, repositioned felt around drum ends.Svf paid $129.95 Auth# NN334A, WP33002535 $67.55, 12001541 $58.83, WP6-3700340 $57.54, Labor $209.95, Svf $129.95, Mps $14.50, Tax $19.91"
We serviced a
KITCHENAID REFRIGERATOR
Model KSSO48QTX02
Near Colorado Springs, CO 80919
Glenn
Job Details:
11/27/2023
"After speaking w/ Scott in Office, it would not be recommended to attempt using regular water line to complete the repair. Since the exisiting water lines are prefitted with proper bends and turns to complete the connections. Let customer know we can not proceed with the repair."
We serviced a
WHIRLPOOL DISHWASHER
Model WDF518SAHM
Near Vail, CO 81657
Antonio
Job Details:
11/27/2023
Found drain hose kinked under sick until tested good
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5501SR/AA
Near Colorado Springs, CO 80921
Mathew
Job Details:
11/27/2023
$209.95 CC Auth# 349XRF replaced evap cover assy. Test op all okay.
We serviced a
SAMSUNG WASHER
Model WF45T6000AW/A5
Near Colorado Springs, CO 80951
Roman
Job Details:
11/27/2023
"Installed new drain pump and housing, checked for leaks and tested the washer. Washer working great."
We serviced a
SHARP MICROWAVE
Model R-530ES-T
Near Colorado Springs, CO 80921
Kris
Job Details:
11/27/2023
ran test op found door latch catching will need listed parts.MLEVPA244WRFZ switch lever 52.08PHOK-A182WRFZ latch hook 60.44
We serviced a
GE ICE MACHINE
Model GSH25JSDBSS
Near Colorado Springs, CO 80925
David
Job Details:
11/27/2023
"Checked icemaker Icemaker had come unplugged Cleaned up connector area, plugged in and icemaker went through cycle and filled"
We serviced a
GE STACK UNIT
Model GUD27GSSM2WW
Near Colorado Springs, CO 80904
David
Job Details:
11/27/2023
Replaced flame sensor and ignitor Tested operation and unit is operating normally
We serviced a
GE DISHWASHER
Model GDP645SYN2FS
Near Colorado Springs, CO 80919
Jessie
Job Details:
11/27/2023
Reseated connections. Teat op. All ok
We serviced a
GE ICE MACHINE
Model UCC15NJCII
Near Colorado Springs, CO 80906
Ralph
Job Details:
11/27/2023
"cust will call GEnsince they sent him the cold control for free, and we did not buy it, once he gets a new cold control, will cakl to have it reinstalled"
We serviced a
GE DRYER
Model GTX33EASK0WW
Near Colorado Springs, CO 80919
Jessie
Job Details:
11/27/2023
Replaced front panel and top. Looks good all ok
We serviced a
ELECTROLUX DRYER
Model EFME527UIW0
Near Colorado Springs, CO 80921
Kris
Job Details:
11/27/2023
pulled unit apart found l1 wire burned at control suggest changing harness and control.5304515407 control board 298.98 5304521235 harness 251.02
We serviced a
WHIRLPOOL DRYER
Model MED6200KW1
Near Colorado Springs, CO 80919
Glenn
Job Details:
11/27/2023
"SRC PWR > Good , Element > OK, Re-seat connections to Heating Circuit. All OPS Test:OK, Suggest customer have vent system cleaned 1X per year."
We serviced a
KENMORE WASHER
Model 110.24632300
Near Pueblo, CO 81005
James
Job Details:
11/27/2023
installed ordered parts all ops test good
We serviced a
WHIRLPOOL DISHWASHER
Model ADB1400AMB0
Near Colorado Springs, CO 80915
Carlos
Job Details:
11/27/2023
"Installed heating element, thermostat and board runs all ok. Advised cx to use rinse aid"
We serviced a
BOSCH DISHWASHER
Model SHXM78Z56N/22
Near Colorado Springs, CO 80924
Kris
Job Details:
11/27/2023
ran test op found tub leaking called techline 4103883174
We serviced a
MAYTAG DRYER
Model MEDB765FW0
Near Colorado Springs, CO 80925
Carlos
Job Details:
11/27/2023
Cleaned out blower wheel and lint trap. Recommend cx have vents cleaned. Cx paid $114.95 CC Auth# 4C33LM
We serviced a
MAYTAG WASHER
Model MVWB765FW0
Near Colorado Springs, CO 80925
Carlos
Job Details:
11/27/2023
Installed water valve ran test op runs ok. Cx paid in full $436.82 CC Auth# 3WTM4N
We serviced a
WHIRLPOOL VENT HOODS
Model WVW53UC6LS
Near Monument, CO 80132
Glenn
Job Details:
11/27/2023
"Adjust Damper, All OPS Test:OK"
We serviced a
WHIRLPOOL DRYER
Model WHD560CHW2
Near Colorado Springs, CO 80925
Carlos
Job Details:
11/27/2023
Installed Thermistor and outlet thermistor. Runs ok. Cx will observe.
We serviced a
WHIRLPOOL DISHWASHER
Model WDF330PAHW4
Near Colorado Springs, CO 80911
Carlos
Job Details:
11/27/2023
Installed heater element and thermostat. Test all ok. Advised cx to fill up wax motor with rinse aid
We serviced a
WHIRLPOOL WASHER
Model WFW97HEDU0
Near Edwards, CO 81632
Antonio
Job Details:
11/27/2023
Installed new ui panel unitvtested good Lb$189.95Tp$17.650$207.45 CK Auth# 99N9PT
We serviced a
KITCHENAID VENT HOODS
Model KVWB406DSS4
Near Colorado Springs, CO 80924
Kris
Job Details:
11/27/2023
installed control ran test op all ok unit is working to spec at this time.
We serviced a
SUBZERO REFRIGERATOR
Model BI-48SD/O
Near Colorado Springs, CO 80906
Ralph
Job Details:
11/27/2023
"cleaned cond unit checks ok,autho no. FE4NAV"
We serviced a
GE RANGE
Model RBS330DR2WW
Near New Castle, CO 81647
Erik
Job Details:
11/27/2023
CX wants to cook tortillas directly on the burner - burner design does not allow for this type of use *see quick picstested with pans - ok temal sensor in burners working as designedJOB COMPLETE
We serviced a
SAMSUNG DRYER
Model DVE45B6300P/A3
Near Colorado Springs, CO 80919
Brandon
Job Details:
11/27/2023
Replaced parts and tested op all ok hass passed
We serviced a
ZEPHYR RANGE HOOD
Model AK7300AS
Near Colorado Springs, CO 80911
Ralph
Job Details:
11/27/2023
"reinserted wiring that was hanging down, unit checked oky"
We serviced a
GE DISHWASHER
Model GDT535PSR3SS
Near Colorado Springs, CO 80910
Roman
Job Details:
11/27/2023
Ran the dishwasher through a normal cycle and diagnostic mode all the cycles and heating element. could not get it to trip. Dw working great.
We serviced a
GENERAL ELECTRIC FRENCH DOOR REFR
Model GFD28GYNBFS
Near Colorado Springs, CO 80908
Kris
Job Details:
11/27/2023
installed control and all parts sent ran test op all ok at this time. cx will monitor unit.
We serviced a
FRIGIDAIRE WASHER
Model FFFW5000QW0
Near Colorado Springs, CO 80903
Roman
Job Details:
11/27/2023
"Washer will not lock or run cycles, noticed the soil level button is stuck inside the cover. Pulled the button out and it stopped flashing and runs through cycles. Panel has been discontinued. Recommend trimming the plastic around the button, cut some of the plastic around the button off, button is not sticking anymore. Washer working great. Paid sc $129.95 CC Auth# W4H39E"
We serviced a
GE MICROWAVE
Model CWL112P2RS1
Near Colorado Springs, CO 80904
David
Job Details:
11/27/2023
"Checked microwave Removed a piece of shipping material from under drawer. Tested operation, and it is closing and heating good"
We serviced a
BOSCH DISHWASHER
Model SHX89PW75N/91
Near Colorado Springs, CO 80909
Roman
Job Details:
11/27/2023
"Ran the dishwasher and the drain cycle is taking a while to drain water out. Pulled the drain pump out and found little bits of plastic and rubber pieces inside the drain pump. Found more of it in the drain line, drain line also had an extension with bits of plastic as-well. cleared it and put the drain line directly to the disposal, dw draining and working great.Labor $209.95Sc $149.95Total cost $359.90"
We serviced a
GE DISHWASHER
Model 64654
Near Colorado Springs, CO 80908
Kris
Job Details:
11/27/2023
ran test op unit is working to spec at this time suggest cleaning dishes off before loading unit.
We serviced a
FRIGIDAIRE OVEN
Model LFEF3054TFN
Near Colorado Springs, CO 80917
Kris
Job Details:
11/27/2023
"unit has damaged door, oven cavity and hinges. oven cavity is not availble if we replaced door and hinges door will still not shut all the way."
We serviced a
GE REFRIGERATOR
Model GSS23GYPFCFS
Near Colorado Springs, CO 80909
David
Job Details:
11/27/2023
Checked refrigerator Noise coming from door closer spring Repositioned and sounds much better
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SKAZ0
Near Colorado Springs, CO 80922
Kris
Job Details:
11/27/2023
found drain hose disconnected reseated ran test op all ok at this time.
We serviced a
MAYTAG WASHER
Model MVWC565FW2
Near Albuquerque, NM 87121
Larry
Job Details:
11/27/2023
"CX complaint - Cycle not starting - Inspected unit and found F7E5, F1E2, and the suspension failed - Unit will need control, shifter, and suspension - CX doesn't want to bear the cost of repair and will replace unit - COllected SC"
We serviced a
JENNAIR REFRIGERATOR
Model JF36NXFXDE01
Near Grand Junction, CO 81507
James R
Job Details:
11/27/2023
Installed trimming. Installed R.H. door and adjust. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
KENMORE RANGE
Model 79079383402
Near Pueblo West, CO 81007
James
Job Details:
11/27/2023
"found unit with short on main board causing intermittent power loss while unit is running. part is nla/discontinued cust stated they have replacement plan, advised if that is accurate xcel will contact in 24-38hrs"
We serviced a
JENNAIR REFRIGERATOR
Model JF36NXFXDE01
Near Grand Junction, CO 81507
James R
Job Details:
11/27/2023
Replaced all lights. Per S84683 operating as should. signed waivers. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
MAYTAG DRYER
Model MEDC465HW0
Near Grand Junction, CO 81504
James R
Job Details:
11/27/2023
Test doesnt work replaced buzzer test again ok. Customer signed waiver. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
GE REFRIGERATOR/TOP
Model CYE22TP2MLS1
Near Pueblo West, CO 81007
James
Job Details:
11/27/2023
"installed ordered part, tested ops all ckok. if problem persist will need to order door from sticky note."
We serviced a
WHIRLPOOL DRYER
Model WED5010LW0
Near Pueblo West, CO 81007
James
Job Details:
11/27/2023
installed preordered cutoff tested ops all ckok. advised cust to leave unit slightly out from wall to insure vent does not get blocked. element not needed
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ16
Near Falcon, CO 80831
Aaron
Job Details:
11/27/2023
"RC gaskets are torn, removed and replaced gaskets, need time to set, working well now. Advised customer of 5 star survey."
We serviced a
MAYTAG WASHER
Model MVW4505MW0
Near Colorado Springs, CO 80923
Aaron
Job Details:
11/27/2023
"Removed and replaced control, tested unit through diagnostics, working well now. Property vacant, unable to obtain signature or advise of survey."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS331SDHM06
Near Colorado Springs, CO 80923
Aaron
Job Details:
11/27/2023
"Unit is unable to defrost, removed and replaced control, thermistor, and heater assembly, unit needs time to cool back down, working well now. Property vacant, unable to obtain signature or advise of survey."
We serviced a
MAYTAG WASHER
Model MVW7230HW0
Near Colorado Springs, CO 80923
Aaron
Job Details:
11/27/2023
"Removed and replaced lower wiring harness, unable to access diagnostics, discussed with techline and found lid switch to be shorted, UI and control did not transfer model and serial info as well, deemed non repairable. Customer to contact customer service. Advised customer of survey. SR77378768391800-253-1301"
We serviced a
GE REFRIGERATOR/TOP
Model GIE18GTNERWW
Near Snowmass Village, CO 81615
Erik
Job Details:
11/27/2023
install/test: GOODJOB COMPLETE
We serviced a
MAYTAG DRYER
Model MED7230HW3
Near Colorado Springs, CO 80927
Aaron
Job Details:
11/27/2023
"Panel and thermal fuse shorted, removed and replaced, working and heating well now, temp to 185f , explained usage and using mixed clothing during sensored cycles. Advised customer of 5 star survey."
We serviced a
GE WASHER-DRYER COM
Model GUD27ESSM1WW
Near Carbondale, CO 81623
Erik
Job Details:
11/27/2023
connect to smartHQ service:**critical lid lock failure**loode lid lock asm * see quick picscorrectedJOB COMPLETE
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near Rio Rancho, NM 87124
Larry
Job Details:
11/27/2023
CX complaint - No power - Replaced control and tested good - Unity is good to go
We serviced a
MONOGRAM REFRIGERATOR/TOP
Model ZWE23PSNGSS
Near Glenwood Springs, CO 81601
Erik
Job Details:
11/27/2023
connect to smartHQ service: **STALL/LOCKED COMPRESSOR**needs compressor (no assembly parts on GE web site or Marcone) and R600acase# 11601330
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHZ05
Near Albuquerque, NM 87109
Jason
Job Details:
11/27/2023
installed part and lubricated rails unit checks ok
We serviced a
MAYTAG WASHER TOP LOAD
Model MVWC415EW1
Near Rio Rancho, NM 87124
Larry
Job Details:
11/27/2023
CX complaint - Washer making loud noises - Inspected unit and found the gearcase failed - CX does not want to bear the cost of repair and will purchase new unit - Collected SCGearcase - $312.58Labor - $249.95MPS - $17.50
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHV01
Near Corrales, NM 87048
Larry
Job Details:
11/27/2023
CX complaint - Not cooling - Inspected unit and found the compressor failed - CX is not the original owver and cannot obtain POP - CX will purchase new unit - Collected SC
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Los Lunas, NM 87031
Larry
Job Details:
11/27/2023
CX complaint - Unit not starting cycle - Inspected unit and found when I plug in the washer the drain pump continuously running - Reset and calibrated controls and tested good - No error codes stored - Unit is operating as designed
We serviced a
MAYTAG WASHER
Model MVW6230RHW
Near Edgewood, NM 87015
Jason
Job Details:
11/27/2023
installed parts listed unit checks ok; used 1 w10721967 (cam) from stock
We serviced a
WHIRLPOOL RANGE
Model WFG525S0JZ5
Near Palisade, CO 81526
James R
Job Details:
11/27/2023
Adjusted top burners too high on low. Checked temp sensor 1076 at sensor and is not grounded. Checked at control 1076 not grounded. Good. Calibrated my meter 32 degrees in ice water. Checked oven temp 400 degrees. Meter probe in center of oven. checked Hi 400 lo 388 hi 402 lo 387 hi 402 lo It is running a bit cool did a +5 degree offset. Shows customer how to do. customer signed waivers. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
WHIRLPOOL DRYER
Model WED9200SQ1
Near Colorado Springs, CO 80921
Glenn
Job Details:
11/27/2023
"squeaking and burning odor , Lint build-up inside unit caused Idler Pulley Assy, Belt & Support Rollers to lock up and grind. Idler Pulley Assy - W10837240 $68.01 , Belt - 661570V $64.26 , Shaft (Rear - LHT) - WPW10359272 $84.28 X3 =$252.84 , Shaft (Front - RHT) - WPW10359271 $84.78 X3 =$254.34 , Support Rollers - WPW10314173 $$56.70 X6 =$340.20 , Tax $80.33 , MPS $14.50 , Labor $219.95 , SC $149.95 , Total Estimate $1,444.38 , Declined Estimate, Paid SC Fee of $149.95 , Autho# 4XLMPJ"
We serviced a
KITCHENAID WALLOVEN
Model KODE500ESS05
Near Colorado Springs, CO 80921
Glenn
Job Details:
11/27/2023
"Convection Fans rubbing and making noise during convection bake. Adjust fan blades away from back wall. All OPS Test:OK, Unit is now quiet. Paid SC fee of $149.95 + Labor $129.95 = $279.90 , Autho #3WA934"
We serviced a
JENN-AIR RANGE GAS
Model JJW2430DP02
Near Colorado Springs, CO 80920
Glenn
Job Details:
11/27/2023
Install New UI Console. Program to unit. All OPS Test:OK
We serviced a
SAMSUNG WASHER
Model WF45T6200AW/US
Near Colorado Springs, CO 80903
Mathew
Job Details:
11/27/2023
"Stacked unit. Svf total $129.95PartsDampers DC66-00470D x 4 (117.40 ea) $469.60Weight DC67-00999A x 2 (253.50 ea) $507.00Parts total $976.60MPs $14.50Labor (two man job, stacked unit) 219.95 x2Labor total $439.90Tax total $80.08 Repair total $1641.03"
We serviced a
SUB ZERO REFRIGERATOR
Model 650/F-LH
Near Colorado Springs, CO 80906
Ralph
Job Details:
11/27/2023
installed parts and unit checked ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX986SIHZOO
Near Colorado Springs, CO 80923
Jessie
Job Details:
11/22/2023
Sealed system only covered for 12 months. Ran test 4 and 5. Some frost but not much. Unit losing cooling.need to trace leak. Dye dryer#W10143759 $60.78Tax $4.98Sc $129.95Msrp$14.50Refrigerant $255Labor $595.95Total $806.16No return on parts. This is to find a leak. From there parts and continued labor of $200-250.
We serviced a
SAMSUNG REFRIGERATOR
Model RF28R7351SG/AA
Near Colorado Springs, CO 80910
Brandon
Job Details:
11/22/2023
"Replaced parts, cycled ice maker tested op all checks ok hass passed"
We serviced a
KITCHENAID DISHWASHER
Model KDTE204KPS0
Near Peyton, CO 80831
Mathew
Job Details:
11/22/2023
"72 81 errors. Wash motor error and water fill error. Water is filling on test cycles, drain pump working. Unit will not wash, will need sump assy. Cx not repairing. Paid svf $129.95$129.95 CC Auth# 3TE3K3Svf $129.95W11243648 $352.08 +28.87 MPs $14.50Due today $525.40Labor $319.95"
We serviced a
ASKO DISHWASHER
Model 107325171
Near Colorado Springs, CO 80906
Roman
Job Details:
11/22/2023
"Noticed the filter had slime on it and not draining properly, could not get the dw into diagnostics, Showed cx how to clean and remove the filters. Checked the dispenser switch and seems okay, recommend replacing the dispenser if issues persist. Recommend using ringside and liquid detergent. Ran a cleaning cycle before I left but dw tuning and doing everything else okay. Paid sc $149.95 CC Auth# 4NHHMM"
We serviced a
SAMSUNG DISHWASHER
Model DW80R9950US/AA
Near Colorado Springs, CO 80922
Mathew
Job Details:
11/22/2023
Replaced door assy. Test op.
We serviced a
SUBZERO REFRIGERATOR
Model IC-36R-LH
Near Colorado Springs, CO 80908
Jessie
Job Details:
11/22/2023
Customer says unit used to be harder to open and now it's much easier. I did a paper test around the whole door. And I have resistance on paper. No moisture around seal or cavity. Found some items hanging over the trim. Gave some instruction.
We serviced a
BOSCH DISHWASHER
Model SGV78B53UC/08
Near Colorado Springs, CO 80908
Jessie
Job Details:
11/22/2023
Needs a soap cup. Broken rinse aidSoap cup#12008380 $102.50Tax $8.412nd Sc $99.95Msrp$14.50Labor $209.95Total $435.31No return on partsCustomer says too expensive he will install himself
We serviced a
MAYTAG WASHER
Model MVWC465HW3
Near Colorado Springs, CO 80925
Carlos
Job Details:
11/22/2023
"7737859821 called tech line. Installed outer tub, suspension and gear case seal that comes with gear case. Ran rinse and spin runs o. Cx will observe."
We serviced a
JENNAIR RANGE
Model JDRP436HL01
Near Monument, CO 80132
Glenn
Job Details:
11/22/2023
"Install New LS Burner Controls. All OPS Test:OK , All Controls work smoothly. No one onsite to sign. Neighbor let me in, then left the house."
We serviced a
SAMSUNG WASHER
Model WF45N5300AF/US
Near Colorado Springs, CO 80922
Mathew
Job Details:
11/22/2023
3c2 dc 6c2 ub found motor coil ok. Issue with pcb. Pcb will need replaced. Svf is 129.95Part DC92-01982A 334.52Tax 27.43MPs 14.50 Due today $506.40Due on install Labor 179.95Job total 686.35. Quotes good for 30 days. $129.95 CC Auth# K49E34
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS05
Near Colorado Springs, CO 80921
Glenn
Job Details:
11/22/2023
"Install New Control. Fill Test on IM > Pass, Install & Adjust new door gasket on RS Door. All OPS Test:OK"
We serviced a
JENN-AIR REFRIGERATOR
Model JF42NXFXDE02
Near Colorado Springs, CO 80926
Carlos
Job Details:
11/22/2023
Installed all LEDs all ok
We serviced a
FISHERPAYKEL WALL OVEN
Model OM30NPX1 FP US
Near Colorado Springs, CO 80907
Roman
Job Details:
11/22/2023
Installed new touchpad and display screen. Display and buttons working great. Core for 30378514 not obtained because Part does not actually have a core.
We serviced a
GE DISHWASHER
Model GLDT696DSS-00
Near Colorado Springs, CO 80904
Roman
Job Details:
11/22/2023
"Ran the dishwasher and it started leaking out of the gasket, gasket is not in the correct spot gasket is still good. Put it back in and tested again dw did not leak. Dishwasher working great. Paid sc check #2091"
We serviced a
WHIRLPOOL RANGE
Model WFG505M0MB0
Near Colorado Springs, CO 80905
Carlos
Job Details:
11/22/2023
Installed regulator and adjusted flames on burners and bake oven all ok.
We serviced a
ELECTROLUX REFRIGERATOR
Model EI33AR80WS2
Near Colorado Springs, CO 80906
Roman
Job Details:
11/22/2023
"Installed new water lines and checked for leaks in the back of the fridge and at the filter, filter working great and water coming out the dispenser. Adjusted fridge back, fridge working great."
We serviced a
MAYTAG DRYER
Model MED7230HW0
Near Colorado Springs, CO 80904
Carlos
Job Details:
11/22/2023
Installed facsia and harness all ok
We serviced a
KITCHENAID WALLOVEN
Model KOCE500ESS20
Near Colorado Springs, CO 80908
Jerimiah
Job Details:
11/22/2023
Installed replacement Copernicus and thermal sensor. Unit check ok.
We serviced a
MAYTAG DRYER
Model MEDB855DC4
Near Colorado Springs, CO 80918
Glenn
Job Details:
11/22/2023
"Install New Blower Wheel, All OPS Test:OK , Paid remaining Labor Balance of $219.95 + Tip 22.00 = $241.95 , Autho# E33KY9"
We serviced a
GE MICROWAVE
Model JNM3163RJ5SS
Near Colorado Springs, CO 80910
Roman
Job Details:
11/22/2023
"Ran the microwave with a cup of water a couple of times and the water heats up, checked the thermostats on the magnetron and behind the cpu, both reading okay. Cup of water is hot after only a minute. Explained to cx the microwave is 950W and not 1200W like most, so a little extra time to cook food"
We serviced a
JENN-AIR RANGE
Model JDSP548HL01
Near Colorado Springs, CO 80908
Jerimiah
Job Details:
11/22/2023
"Unit tripping breaker whenever ovens are turned on, unit is intermittent having faults. Ran amp check and found with unit at full power only drawing 30a each leg. Unit is on gfci 50 amp double breaker, ran unit again and with both units running did not trip. Advised that breaker should be replaced with standard. Could not get unit to fail 2nd time. Cust will keep track of unit functionality."
We serviced a
WHIRLPOOL RANGE
Model WEG750H0HV0
Near New Castle, CO 81647
James R
Job Details:
11/22/2023
Replaced igniter and bake burner. Test operation 475 degrees. Let unit cycle on and off several times. Unit then reset poered off. called tech line unit unit needs a software update. Called number tried to connect unit a number of times unit would not connect. Customer will need to call wifi help.They will then help with connection issue. SR# 7737858341 Customer to pay labor. $149.95 auth code 9L4RL9.
We serviced a
GE REFRIGERATOR
Model ZFSB26DRBSS
Near Colorado Springs, CO 80906
Jessie
Job Details:
11/22/2023
Customer says unit had no diaplay and clicking at top relay bd area. Upon arrival unit is cooling well. But hot center strip and very dort condenser. Cleaned up unit and customer to monitor. Tried dispenser and relay board started to fade. Control#wr55x10942c $387.14Tax $31.75Sc $129.95$14.50Labor $199.95Total $763.29Customer wants to think about it
We serviced a
SCOTSMAN ICE MACHINE
Model SCCP30MA-1SU
Near Colorado Springs, CO 80904
Jessie
Job Details:
11/22/2023
Replaced oce cube t Stat and bin control. Leak strip under unit. All ok
We serviced a
GE WALL OVEN ELECTR
Model JT96530????
Near Colorado Springs, CO 80918
Jessie
Job Details:
11/22/2023
Model tag is worn. Cannot read.Unit has a bad bd. Need to replace. Cannot find correct part #. Customer going to go around neighborhood and ask neighbors if they have the same unit and retirve a model.
We serviced a
FRIGIDAIRE DISHWASHER
Model FFID2426TD1A
Near Pueblo, CO 81005
David
Job Details:
11/22/2023
Replaced control and turbidity sensor Tested operation
We serviced a
SAMSUNG REFRIGERATOR
Model RF23M8070SR/AA
Near Colorado Springs, CO 80921
Mathew
Job Details:
11/22/2023
Completed service bulletin. Test op all okay. Re set icemaker.
We serviced a
SAMSUNG WASHER
Model WF50BG8300AVUS
Near Monument, CO 80132
Brandon
Job Details:
11/22/2023
Replaced diaphragm op all ok hass passed
We serviced a
MAYTAG DRYER
Model MEDC215EW0
Near Pueblo, CO 81005
David
Job Details:
11/22/2023
Replaced heater element and Thermal cut off Tested and is heating good
We serviced a
WHIRLPOOL WALL OVEN
Model WOS52ES4MZ
Near Colorado Springs, CO 80918
Glenn
Job Details:
11/22/2023
"Unit powers on, not heating. Techline: Check: power in , P1 BRN L1 BLK COMMON FOR ELEMENTS , P8 BRN L2 240VAC , Ohm elements , P8 ELEMENT BAKE WHT W/ YELLOW , BROIL RED , SR# 7737852868Power to unit is problem, No L2? , Found cord wired to loosely, wire for L2 melted, and other wires came loose simply by tugging on cable end. Suggest customer have electrician replace cord end and make sure wires are tight. Breaker turned off for safety. Not covered under warranty, Paid SC fee of: $129.95 , Autho# 393LPP"