Thermador Repair Jobs and Surveys

Replaced microwave turntable and tested operation ok. Replaced seized rack in oven cavity. All now working properly. RK

"No bake, element ohm ok. Relay board no longer available. Service fee $169.95 paid autho 9JHL9J"

Installed ordered part tested ops all ckok left litmus. Filter head no longer leaks and dispenser is flowing as designed collected 295.95 $295.95 CC Auth# JN44CN

FALSE ALARM - FF CAVITY SET AT 36 AND HOLDING TEMPCX USED A THERMOMETER TO CHECK TEMPS WITH NO FOOD OR LIQUIDS IN FF CAVITYGLASS OF WATER AFTER 24 HOURS WILL REFLECT PROPER TEMPSJOB COMPLETECALL BSH TAG: DOCUMENT CALL AND CONFIRM ALL VITALS NOMINAL

INSTALL DEFROST THERMISTER - RUN THERMISTER TEST: PASSJOB COMPLETE

Replaced damaged freezer door panel. RK

install/ fill with r134awill take a few hours to regulate

FD 0405 01574(2) RH DOORS ON SITE WITH FZ DOORCX MUST CALL DEALER FOR PART # 20002663 LH DOORONE OF THE RH DOORS WAS DAMAGED* SEE QUICK PICS

INSTALL DOORJOB COMPLETENEW CONSTRUCTION - CX NOT AVAILABLE FOR SIGNATURE

"Disassembled the freezer compartment and removed the evaporator cover, top and back panel . Removed the fan motor and installed the new one . Reassembled the unit.Started the unit and watched the fan come on and start cooling the freezer back down.Tested the unit good."

Replaced user interface and tested all functions

ACCESS WITH BUILDERINSTALL PANELSJOB COMPLETE

RESET THERMOSTAT/ INSTALL PANELFD 0412 00146JOB COMPLETE

"Tested unit checked over,called Thermador tech support, per tech support all specs are there for the unit , the venting from the vent hood to the roof needs to be 10 piping ,if not 10 it needs to be changed, also smoke detector is close to kitchen area and is getting set off while customer is cooking."

Replaced racks and supports in main oven. Adjusted/leveled oven door.All now workin properly. RK

FD 0409 100339UNIT NOT INSTALLED - LISTING FORWARD DOORS OPEN (FROST PATTERN - EVERYWHERE) WATER IS NOT TURNED ONlevel unit/ clear ice from FZ compartmentCX REQUEST WE FINISH INSTALLING MICRO AND FRIDGE -D3 IS NOT AND EXTRA INSTALLER -MUST HAVE INSTALLERS RETURN TO FINISH ALL KITCHEN APPLIANCES

INSTALL SWITCH KIT/ TEST: PASS1 CUP WATER BOIL/ 1 MINJOB COMPLETE

"Unit not completing dbus, connector to cavity one Door lock disconnected from shipping/ manufacturing. Disassemble top reconnect and test job complete."

Removed and replaced damaged door panels. All now checks ok .RK

"UNIT PULLED DOWN INTO A 10 LB VACUUM, ALSO CAME IUT OF VACUUM WHEN POWER WAS KILLED, UNIT HAS A LEAK AND WILL NEED LISTED PARTS, CUST NOT REPAIRING DUE TO COST...AUTHO NO. 34HHW3"