We serviced a
WHIRLPOOL DRYER
Model WED4950HW0
Near Pueblo, CO 81008
David
Job Details:
11/02/2023
"Checked dryer Found thermal fuse open, replaced Unable to testOne leg of power is out, did reset breaker, but one side will not resetBuilder to replace breaker"
We serviced a
BOSCH MICROWAVE
Model HMV8044U/01
Near Peyton, CO 80831
Jerimiah
Job Details:
11/02/2023
"Called techline, found control board has stuck relay, in order to repair unit fully will need replacement controller. Charged labor from previous work. $218.44 CC Auth# 44CJK411016120 controller $310.10"
We serviced a
WHIRLPOOL DRYER
Model WED9200SQ0
Near Pueblo, CO 81005
James
Job Details:
11/02/2023
Install priorder parts tested operations all ckok
We serviced a
KITCHENAID VENT HOODS
Model UXB1170KYS0
Near Granby, CO 80446
Erik
Job Details:
11/02/2023
we did work!
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS321SDHB08
Near Colorado Springs, CO 80918
Glenn
Job Details:
11/01/2023
Rattling noise. Found Condensor fan rubbing on foam cover on coolant line. adjust foam and coolant line. Unit now running normal & quiet.
We serviced a
SAMSUNG REFRIGERATOR
Model RF265BEAESR/AA
Near Colorado Springs, CO 80915
Mathew
Job Details:
11/01/2023
Replaced all icemaker parts. Test op all okay.
We serviced a
GE REFRIGERATOR/TOP
Model GZS221YNXHFS
Near Colorado Springs, CO 80919
Kris
Job Details:
11/01/2023
adjusted feet. unit is working to spec at this time.
We serviced a
MAYTAG DRYER
Model MED7230HC3
Near Pueblo West, CO 81007
David
Job Details:
11/01/2023
Checked dryer Ck said that there is a rattle when it is first started and the control would freeze and they have to unplug machine and plug it back in to get it to run.Took apart and made sure all screws are tight Replaced control panel If problem with control freezing then it may need the main control board. Tested and is running good at this time.
We serviced a
FRIGIDAIRE RANGE GAS
Model GCRG3060AFC
Near Colorado Springs, CO 80928
Roman
Job Details:
11/01/2023
"Installed new spark module and tested all the burners, all igniting right away. Range working great. Paid $249.95 cc $249.95 CC Auth# X944LH"
We serviced a
KITCHENAID DISHWASHER
Model KDTE204KPS1
Near Colorado Springs, CO 80920
Glenn
Job Details:
11/01/2023
"Install New Sump & Motor Assy. All OPS Test:OK, No Leaks, Installed Leak detector for safety."
We serviced a
WHIRLPOOL RANGE
Model WFE505W0JS0
Near Colorado Springs, CO 80921
Glenn
Job Details:
11/01/2023
Install New Infinite Switch for RF Burner. All OPS Test:OK
We serviced a
BOSCH DISHWASHER
Model SHPM78Z55N/20
Near Monument, CO 80132
Kris
Job Details:
11/01/2023
the diswaher was attached and mounted correclty. cx needs installer or cabinet tech to fix issue.
We serviced a
SAMSUNG DRYER
Model DVE55A7700V/A3
Near Colorado Springs, CO 80917
Jeremy
Job Details:
11/01/2023
Dryer moisture sensor issue. CX complaint is when she would start a normal cycle it would go from starting time and then time would go down and stop pretty quick leaving laundry wet. We put a wet blanket in dryer and witnessed what CX is experiencing. I then contacted tech support and performed sensor test and passed. Tech support said unit is working correctly and customer education was needed. Ran HASS.
We serviced a
SAMSUNG WASHER
Model WF45T6000AW/A5
Near Colorado Springs, CO 80927
Mathew
Job Details:
11/01/2023
"Replace door gasket. Test op, unit working as expected."
We serviced a
SAMSUNG WASHER
Model WF45R6100AC/US 03
Near Colorado Springs, CO 80923
Jeremy
Job Details:
11/01/2023
Diaphragm is ripped and needs to be replacement. Service Charge $129.95 Labor $219.95 M&P $14.50 Part $151.46 Tax $12.42 Total $528.28 CX is going to dicuss cost with spouse. Sertvice Charge $129.95 Auth:3PR3RU
We serviced a
SAMSUNG REFRIGERATOR
Model RF28JBEDBSG/AA 07
Near Colorado Springs, CO 80922
Jeremy
Job Details:
11/01/2023
Lots of ice build up. Used all supplied parts. Not HASS compatiable. Ice maker working to the best of my knowledge. Asked cx to complete the survey.
We serviced a
SAMSUNG DRYER
Model DVE45T3400P/A3
Near Colorado Springs, CO 80920
Mathew
Job Details:
11/01/2023
Replaced element assy. Test op all okay.
We serviced a
SUBZERO REFRIGERATOR
Model UC-15IP
Near Colorado Springs, CO 80906
Jessie
Job Details:
11/01/2023
Replaced pump and ran clean cycle. All ok
We serviced a
KITCHENAID DISHWASHER
Model KDTE234GWH0
Near Colorado Springs, CO 80919
Carlos
Job Details:
11/01/2023
"Installed water valve. Ran test op, found no leaks, left leak strip."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF560SEYW00
Near Glenwood Springs, CO 81601
James R
Job Details:
11/01/2023
Dropped off icemaker. customer will install..
We serviced a
BOSCH REFRIGERATOR
Model B36CL80SNS/10
Near Colorado Springs, CO 80924
Kris
Job Details:
11/01/2023
adjsuted drawer ran test op all ok unit is working to spec at this time.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ04
Near Colorado Springs, CO 80924
Kris
Job Details:
11/01/2023
fc temp@27.0 rc temp@40.0 installed compressor and all parts sent ran test op unit is working to spec at this time.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ04
Near Colorado Springs, CO 80919
Glenn
Job Details:
11/01/2023
"Install New Evap Motor, UI Control & Main Control. All OPS Test:OK."
We serviced a
SAMSUNG REFRIGERATOR
Model RF28T5001SR/AA
Near Colorado Springs, CO 80925
Jeremy
Job Details:
11/01/2023
Refridgerator section not cooling. Evap fan not working. Need to replace P-FRE COVER EVAP MODULE. Service Charge $129.95 Labor $209.95 M&P $14.50 Tax $21.78 Total $641.76. CX denied repair. Service Charge $129.95 Auth: X94MLY
We serviced a
SAMSUNG MICROWAVE
Model ME16A4021AS/AA
Near Colorado Springs, CO 80925
Jeremy
Job Details:
11/01/2023
No power to microwave. Main Fuse blown. Replaced fuse and microwave is working. Asked CX to complete the survey.
We serviced a
SAMSUNG DRYER - ELECTRIC
Model DVE45B6300C/A3
Near Colorado Springs, CO 80925
Jeremy
Job Details:
11/01/2023
CX smelled burning during dryer operation. I contacted samsung tech support. Issue is L1 on terminal block was no properly installed and was left loose. This loose connection eventually caused arcing/heat that burnt L1 connection on terminal block (see picture). Samsung denied repair due to improper installation. CX is advised to communicate issue with installation company.
We serviced a
WOLF RANGE GAS
Model R366
Near Monument, CO 80132
Jerimiah
Job Details:
11/01/2023
"Back right burner continually clicking now. Cleaned igniter burner cap head and base, still clicking called techline, says possibly weak igniter. Cust is holding off as not sure if weak igniter is culprit, Cust will live with issue. Labor would be $189.95 upon return service if Cust decides later.814883 igniter $100.40"
We serviced a
AMANA DRYER
Model NED4655EW1
Near Pueblo West, CO 81007
David
Job Details:
11/01/2023
Checked dryer Reattached wire to heaterTested and is working good
We serviced a
GENERAL ELECTRIC DISHWASHER - BUI
Model CDT805P2N3S1
Near Pueblo, CO 81005
David
Job Details:
11/01/2023
"Checked dishwasher Ran through a cycle The sounds I am hearing seem to be normal The diverter that was put in is working better than the old one, the water pressure to the spray arms is better than before."
We serviced a
MIELE WASHER
Model WXD160
Near Colorado Springs, CO 80903
Roman
Job Details:
11/01/2023
"Ran the washer and could not get it to leak, ran a diagnostic cycle and it did not show error codes or leak. Recommend keeping the glass clean for a tight seal. Call us right back if it starts leaking. Paid sc cc $149.95 CC Auth# 9Y99XV"
We serviced a
BOSCH DISHWASHER
Model SHEM63W55N/20
Near Vail, CO 81657
Erik
Job Details:
11/01/2023
pulled unit out to styes and remount *see quick picsJOB COMPLETE
We serviced a
WHIRLPOOL RANGE
Model WFE505W0HW5
Near Colorado Springs, CO 80923
Jerimiah
Job Details:
11/01/2023
Cust using proper water and correct amount. Unit is functioning as designed but still not cleaning as much as expected. Cust will contact whirlpool. Unit check ok.
We serviced a
WHIRLPOOL WASHER
Model MVW7230HW0
Near Pueblo, CO 81006
David
Job Details:
11/01/2023
Replaced water valve dispenser and faucet switch Tested and running working good
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ1
Near Colorado Springs, CO 80905
Carlos
Job Details:
11/01/2023
Ran test op. Found water supply line was loose. Retighten ran a quick cycle. No leaks found
We serviced a
WHIRLPOOL STOVE
Model WFE320M0JS3
Near Colorado Springs, CO 80910
Carlos
Job Details:
11/01/2023
Ran test op. No power from wall outlet. Reset circuit breaker. Runs all ok
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Colorado Springs, CO 80906
Carlos
Job Details:
11/01/2023
Installed leveling feet. All ok
We serviced a
WOLF OVEN
Model DO3050TE/S/T
Near Colorado Springs, CO 80921
Jessie
Job Details:
11/01/2023
Replaced inner door. All ok
We serviced a
KITCHENAID WALLOVEN
Model KOCE500ESS08
Near Fountain, CO 80817
Carlos
Job Details:
11/01/2023
Installed control board and temp sensor. Ran test op runs ok. Cx paid 209.95 CC Auth. #44XTAN
We serviced a
SAMSUNG DISWASHER
Model DW80R2031US/AA
Near Colorado Springs, CO 80920
Mathew
Job Details:
11/01/2023
"Found OC error code. Validated serial with tech line, found seal out of place, reattached and test op, unit working as expected. Drain hose was kinked under cabinet causing slow drain, too much water in cabinet. Called hass support about hass compatiblity, they told me it was not."
We serviced a
WHIRLPOOL M/W OTR
Model WMH32519HZ07
Near Colorado Springs, CO 80908
Aaron
Job Details:
11/01/2023
"Removed and replaced transformer, tested unit and heating well now. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL WALLOVEN
Model WOC75EC0HS20
Near Colorado Springs, CO 80908
Aaron
Job Details:
11/01/2023
"UI control is resetting periodically, removed and replaced UI control, programmed and tested, working well now. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL WASHER
Model MVWC416FW1
Near Pueblo, CO 81001
David
Job Details:
11/01/2023
"Checked washer Motor pully melted, belt broken, spluch pully not smooth They have decided to go with a new machine"
We serviced a
THERMADOR OVEN
Model PGR364GDZS/01
Near Avon, CO 81620
Erik
Job Details:
11/01/2023
test unit: Thermador ALL GAS PROTemp sensor only works on standard bake correctlyBriol ignition failure temp sensor shortBroiler ignition kit 00493265 (DISCONTINUED) NLAneutral break not occuring unless breaker is manually tripped and reconnected (BREAKER RESET)parts required to fix the issue are no longer available and discontinued from the manufacturer SERVICE COMPLETE charge$189.95autho# W4PUU9
We serviced a
SUBZERO REFRIGERATOR
Model 590
Near Colorado Springs, CO 80907
Ralph
Job Details:
11/01/2023
"installed parts and unit checked okay, cust to monitor"
We serviced a
WHIRLPOOL WALLOVEN
Model WOC75EC0Hs04
Near Colorado Springs, CO 80905
Ralph
Job Details:
11/01/2023
"was not the board but a blown tco and wiring, fixed the wiring and repalced the tco, prt cost 63.15...total cost of this repair was 402.73, cust previously paid 384.31, so today cust paid 18.42, unit checked okay"
We serviced a
WHIRLPOOL DISHWASHER
Model ADB1400AMB0
Near Colorado Springs, CO 80915
Carlos
Job Details:
11/01/2023
Installed Sump and motor. ran test op all ok Left leak strip
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT112CZJZ00
Near Colorado Springs, CO 80923
Aaron
Job Details:
11/01/2023
"Defrost drain clogged, excessive moisture causing frost, no cooling in RC. Cleared ice, working well now . Advised customer of 5 star survey."
We serviced a
WHIRLPOOL DISHWASHER
Model WDPA70SAMZ1
Near Glenwood Springs, CO 81601
James R
Job Details:
11/01/2023
Replaced UI control. Unit now starts. Test cycle thru service diagnostics. Ok no issues working as should. Customer signed waivers. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
GE DRYER
Model GTD42EASJ2WW
Near Edwards, CO 81632
Erik
Job Details:
11/01/2023
install parts/ test: GOODJOB COMPLETE
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF507HPS02
Near Pueblo, CO 81008
David
Job Details:
11/01/2023
Replaced control Ran diagnostics All good
We serviced a
SAMSUNG WASHER
Model WF45N5300AW/US
Near Pueblo, CO 81004
James
Job Details:
11/01/2023
found loose wire at door lock mech causing door locks to interminently not open. secured and tested. Ops ckok
We serviced a
JENN-AIR RANGE ELECTRIC
Model JDRP548WP02
Near Colorado Springs, CO 80904
Roman
Job Details:
11/01/2023
Installed 2 new cooling fans and reinstalled the unit back. Tested the ovens and both getting to temp and staying there without error code. Paid $479.95 cc
We serviced a
KITCHENAID REFRIGERATOR
Model KUIX535HPS01
Near Beaver Creek, CO 81620
Antonio
Job Details:
11/01/2023
Found drain hose kinked in back straightened out unit tested good
We serviced a
BOSCH DISHWASHER
Model SHEM63W55N/20
Near Edwards, CO 81632
Erik
Job Details:
11/01/2023
install drain pump/ remove plug from disposal draintest: GOODJOB COMPLETE
We serviced a
BOSCH FRENCH DOOR REFR
Model B36CT80SNS/11
Near Edwards, CO 81632
Erik
Job Details:
11/01/2023
install fan/ test: GOODJOB COMPLETE
We serviced a
SAMSUNG DRYER
Model DVE45B6300C
Near Pueblo, CO 81008
James
Job Details:
11/01/2023
found loose wire at heating element causing intermittent heating issues. also advised cust to make sure eco button is not active all ops test good
We serviced a
SPEEDQUEEN WASHER
Model awn632sp116tw02
Near Colorado Springs, CO 80911
Mathew
Job Details:
11/01/2023
"ReplCed lid switch, test op all okay. Owes 179.95 labor. Ran card on file, waiting on Cx approval."
We serviced a
SAMSUNG REFRIGERATOR
Model RF265BEAESR/AA
Near Colorado Springs, CO 80915
Mathew
Job Details:
11/01/2023
Replaced all icemaker parts. Test op all okay.
We serviced a
SAMSUNG RANGE
Model NX60T8711SG/AA 03
Near Colorado Springs, CO 80911
Jeremy
Job Details:
11/01/2023
Installed new burner head and electrode. Burner is now lighting as designed.
We serviced a
GE REFRIGERATOR
Model GFE28GYNJFS
Near Pueblo West, CO 81007
James
Job Details:
11/01/2023
found loose tstat connection at board causing poor readings secured and tested. advised cust to keep for at least an inch from evap fan air holes on cover to promote proper air flow through system
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF555SDFZ16
Near Pueblo West, CO 81007
James
Job Details:
11/01/2023
installed pre-ordered parts for faulty door seals. checked ops all ckok
We serviced a
VIKING REFRIGERATOR
Model DFSB483
Near Colorado Springs, CO 80915
Ralph
Job Details:
11/01/2023
"unit has a bad inverter, cust to purchase part and install ihisself"
We serviced a
KITCHENAID WALLOVEN
Model KOCE500ESS20
Near Colorado Springs, CO 80927
Jerimiah
Job Details:
11/01/2023
"Installed replacement mag and inverter. Unit check ok, charged labor as quoted, $189.95 CK Auth# J33TC3 chk#324"
We serviced a
SAMSUNG DISHWASHER
Model DW7933LRABB/AA
Near Pueblo, CO 81007
James
Job Details:
11/01/2023
"installed ordered parts, tested ops all ckom. left litmus."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF767SDHZ03
Near Carbondale, CO 81623
James R
Job Details:
11/01/2023
Evac system. Removed compressor and drier. Installed service port on new compressor. Installed new compressor and drier. Evac system again. Let set for a few minutes to check for leaks. Ok. Installed new overload/relay/ capacitor asy. Recharge system. suction side -6 Pressure side 65 PSI compressor amperage. .81 good. Unit is starting to cool. signed waiver. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ08
Near Glenwood Springs, CO 81601
James R
Job Details:
11/01/2023
"Replaced evaporator motor, grommet and fan blade. Reassembled. Started unit. Sounds much better. Customer signed waiver. Please fill out whirlpool tech satisfaction survey. Thank You."
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Albuquerque, NM 87108
Jason
Job Details:
11/01/2023
installed parts unit checks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRQA59CNKZ
Near Albuquerque, NM 87109
Jason
Job Details:
11/01/2023
Installed both door gaskets unit checks ok
We serviced a
KITCHENAID DISHWASHER
Model KDTM404KPS0
Near Albuquerque, NM 87111
Jason
Job Details:
11/01/2023
cx does not want to have dishwasher pulled out unless it will fix her issue. unit will need a control and vent assy
We serviced a
WHIRLPOOL RANGE
Model KSGG700ESS0
Near Albuquerque, NM 87111
Jason
Job Details:
11/01/2023
installed cooling fan unit checks ok
We serviced a
WHIRLPOOL M/W OTR
Model WML75011HZ10
Near Edgewood, NM 87015
Jason
Job Details:
11/01/2023
installed fan motor unit checks ok
We serviced a
MAYTAG WASHER
Model MVW4505MW1
Near Los Lunas, NM 87031
Larry
Job Details:
11/01/2023
Installed cap and tested good - Unit is good to go
We serviced a
WOLF OVEN
Model DO3050TE/S/T
Near Colorado Springs, CO 80921
Jessie
Job Details:
11/01/2023
Replaced bad panel. Teat opm all ok
We serviced a
SAMSUNG OVEN
Model NQ70M6650DS/AA
Near Colorado Springs, CO 80908
Jerimiah
Job Details:
11/01/2023
Installed replacement wire harness unit check ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ00
Near Peralta, NM 87042
Larry
Job Details:
11/01/2023
CX complaint - Cannot remove filter - Inspected unit and found the housing failed - Replaced with pre-id part and tested good - Unit is good to go
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017HS08
Near Los Lunas, NM 87031
Larry
Job Details:
11/01/2023
CX complaint - it's plugged in but no power no power since 10/18/23 - Inspected unit and found connection on board loose - Secured connection and tested good - Unit is good to go
We serviced a
WHIRLPOOL DRYER
Model WED500CMW0
Near Los Lunas, NM 87031
Larry
Job Details:
11/01/2023
Installed control and tested good - Unit is good to go
We serviced a
KITCHENAID ICEMAKER
Model KUID508ESS2
Near Los Lunas, NM 87031
Larry
Job Details:
11/01/2023
Installed parts listed and tested good - Unit is good to go
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Belen, NM 87002
Larry
Job Details:
11/01/2023
CX complaint - Not agitating - Inspected unit and found the capacitor failed and leaker - Replaced with pre-id parts and tested good - Unit is good to go
We serviced a
WHIRLPOOL DISHWASHER
Model DU945PWPQ0
Near Rifle, CO 81650
James R
Job Details:
10/31/2023
Test run unit. Fills but does not circulate water. Motor pump asy is bad. They will replace unit. customer signed waiver. Customer paid $99.00auth code. 933VVJ
We serviced a
WHIRLPOOL FREEZER
Model WRF990SLAM02
Near Colorado Springs, CO 80924
Kris
Job Details:
10/31/2023
rc temp@ 42.7 fc temp@21.4 unit has sealed system leak
We serviced a
SAMSUNG REFRIGERATOR
Model RH25H5611SG/AA
Near Colorado Springs, CO 80921
James S
Job Details:
10/31/2023
Put in all shelves in fridge and freezer.$129.95 CK Auth# 3RM44N
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ08
Near Colorado Springs, CO 80923
Aaron
Job Details:
10/31/2023
"Removed and replaced door and nameplate, no scratches or dents, working well now. Customer unavailable, unable to obtain signature or advise of survey."
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Colorado Springs, CO 80919
Glenn
Job Details:
10/31/2023
"Reseat Connections to PCB, All OPS Test:OK"
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Colorado Springs, CO 80909
Carlos
Job Details:
10/31/2023
"Installed capacitor, shifter and control board. Ran test op runs ok"
We serviced a
BOSCH DISHWASHER
Model SHE43RF2UC/64
Near Colorado Springs, CO 80909
Roman
Job Details:
10/31/2023
"Checked the breaker and it was tripped, flipped it back on and tested the dw. Dw turned on. Checked the connectors and motor. Dw working great. Paid sc cc $149.95 CC Auth# V9KH9J; (serial indicated as 'NotAvailable' so system created UIS w/pseudo #)"
We serviced a
BOSCH DISHWASHER
Model SHP65TL5UC/07
Near Colorado Springs, CO 80904
Roman
Job Details:
10/31/2023
Ran the dw and it it sounded like there was a gap in between the door and tub. Door also crooked. Right side had 2 screws and both coming out and keeping the door from closing properly causing it to leak in the upper right side. Removed the screws and installed one properly and door shuts properly. Have a feeling that was whats causing it to run past its cycle as-well. Recommend to cx keeping filters clean. Sc $149.95Labor $50.00Total cost $199.95 paid gc
We serviced a
MAYTAG DRYER
Model MDE7658BYW
Near Colorado Springs, CO 80921
Glenn
Job Details:
10/31/2023
"Unit not starting, just hums when attempt to start. Bad Motor , Motor - WP33002795 $299.42 , Tax $24.55 , MPS $14.50 , Labor $219.95 , Customer Declined Estimate. Paid SC fee of $129.99 Via Chk #1693 ,(Customer wrote check for 129.99) Autho# RCPV9Y"
We serviced a
BOSCH WALL OVEN
Model HBL5450UC/08
Near Colorado Springs, CO 80919
Roman
Job Details:
10/31/2023
Ran the oven to 200 degrees and oven got to that temp and kept getting hotter. Ran diagnostics no error codes came up. Cx said error E115 came up indicating the oven is too hot. Tapped on the relays on the control board and ran the oven again. Temps stayed at where they were set. Recommend replacing the main control boardControl board #12022212 $479.63Tax $39.33Part total $518.96MPs $14.50Labor $289.95Sc $149.95Total cost $973.36
We serviced a
ASKO DISHWASHER
Model ASK|DFI675XXL|737050
Near Colorado Springs, CO 80906
Roman
Job Details:
10/31/2023
Showed up and talked to cx and she had said this was from a year ago. Dw has been working fine since.
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF757SDHZ02
Near Colorado Springs, CO 80920
Kris
Job Details:
10/31/2023
installed compressor charged to 5.25 oz of 134a ran tst op all ok at this time. cx will monitor unit for 24 hours
We serviced a
FRIGIDAIRE RANGE
Model FCRE305LAFJ
Near Colorado Springs, CO 80915
Jerimiah
Job Details:
10/31/2023
"Installed replacement parts. Unit check ok, Cust will keep track of unit functionality."
We serviced a
SAMSUNG OTR MICROWAVE
Model ME21M706BAS/AA
Near Pueblo West, CO 81007
Jeremy
Job Details:
10/31/2023
Microwave not heating. Bad magnetron/ capacitor. Installed both new parts. Microwave tested good. I asked CX to complete the survey.
We serviced a
SAMSUNG DISHWASHER
Model DW80RSB61US
Near Colorado Springs, CO 80920
Kris
Job Details:
10/31/2023
ran test op no signs of burning smell unit needs control and heating element.heater dd47-00008a 256.12control board dd82-01337b 283.30
We serviced a
GE RANGE
Model JGBP34GEP3AD
Near Colorado Springs, CO 80906
Jerimiah
Job Details:
10/31/2023
"Bake igniter not glowing, needs replacing. Cust holding off. Labor will be $189.95 upon return service $129.95 CC Auth# 34PV9FBake igniter WB2X9154 $171.38"
We serviced a
ZLINE RANGE
Model RA30
Near Colorado Springs, CO 80919
Jerimiah
Job Details:
10/31/2023
"Unit taking forever to preheat, verified bake element and inner broil working properly. Cust using high bake properly, checked broil and both elements heat.Replaced thermostat and still no difference. Called techline and with all the repairs, they will have their Cust experience people reach out to cust for resolution. Closing call."
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Colorado Springs, CO 80910
Carlos
Job Details:
10/31/2023
"10/23/23 8:47: CR there 23 MON, 8:04 to 8:38, Ran test op. Found Cam teeth are broken and needs a new cam. Replace cam with new one. Cx paid full amount $406.44 CC Auth# W9PMMC; ordrng 1 W10721967 (Cam)"
We serviced a
JENNAIR REFRIGERATOR
Model JS48SSDUDE00
Near Colorado Springs, CO 80906
Carlos
Job Details:
10/31/2023
Ran test op. Refrigerator is cooling at correct temperatures. All ok Cx paid SC $149.95 Auth# WHAF4U
We serviced a
MAYTAG WASHER
Model MVWB765FW3
Near Colorado Springs, CO 80905
Carlos
Job Details:
10/31/2023
"Needs a motor and Transmission, cx will not repair"
We serviced a
WHIRLPOOL WASHER
Model WTW8127LC1
Near Albuquerque, NM 87121
Larry
Job Details:
10/31/2023
complaint - Long cycle timer - Inspected unit and found ut out of calibration - Calibrated unit and tested good - Unit is good to go