We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT511SZDM02
Near Colorado Springs, CO 80921
Dvante
Job Details:
02/12/2025
"Checked unit, found the handle cracked. Replaced the handle. Door is opening properly."
We serviced a
WHIRLPOOL DRYER
Model WGD8127LC3
Near Colorado Springs, CO 80923
Aaron
Job Details:
02/12/2025
"Removed and replaced coil pack, tested unit on both regular normal and timed dry cycles, unit is lighting and heating well now, temperatures are good, placed unit in best spot to allow best airflow. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Colorado Springs, CO 80903
Carlos
Job Details:
02/12/2025
Installed terminal & wires runs all ok
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF577KPS02
Near Monument, CO 80132
Dvante
Job Details:
02/12/2025
"Checked unit, found the noise but had to call tech support to confirm where the noise is coming from. Couldnt replicate the noise. Its very intermittent. Did move the unit away from the leak detector they have on the left side of unit. No noises couldnt be replicated. Customer will call manufacturer if noise happens againSR7740943474"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHZ08
Near Colorado Springs, CO 80922
Aaron
Job Details:
02/12/2025
"Ice maker is unable to complete harvest estimate cycle, removed and replaced ice maker assembly, tested unit through harvest cycle, working well now, FC temperature is good. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL WALL OVEN
Model WOC75EC0HS20
Near Jacksonville, OR 97530
Jeff
Job Details:
02/12/2025
Installed parts tested machine working as should tested to 350.
We serviced a
MAYTAG WASHER
Model MVW6230HW3
Near Medford, OR 97501
Jeff
Job Details:
02/12/2025
Installed parts tested machine working as should
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ1
Near Bend, OR 97702
Levi
Job Details:
02/12/2025
Replace panel checked okay. Job complete. New construction and vacant. Builder representative met me here and also inspected.
We serviced a
WHIRLPOOL RANGE
Model WFES3330RW0
Near Terrebonne, OR 97760
Austin
Job Details:
02/12/2025
Installed parts. Tested unit all ops sat per factory spec.
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMZ4
Near Medford, OR 97501
Jeff
Job Details:
02/12/2025
Installed sump tested working as should no leaks
We serviced a
WHIRLPOOL DRYER
Model WETLV27HW3
Near Bend, OR 97701
Levi
Job Details:
02/12/2025
"Blower wheel is rubbing on a piece of metal, cracked it works fine"
We serviced a
MAYTAG WASHER
Model MVW6500MBK0
Near Medford, OR 97501
Jeff
Job Details:
02/12/2025
Found changed jammed between agitator and tub. Removed and tested machine no smells of burning
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF757SDHZ04
Near Bend, OR 97703
Levi
Job Details:
02/12/2025
Tightened up freezer handle and the left hand refrigerator handle. All checks okay
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF560SEHZ03
Near Carbondale, CO 81623
James R
Job Details:
02/12/2025
Icemaker had no water in it. and icemaker was not cycling fz was cold enough. Replaced valve and icemaker cycle it filled just fine. Unit working as should. Unit is occupied. as of date listed. Put aleak board under unikt and took pic. Please fill out tech satisfaction survey. Thank You.
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS01
Near Socorro, NM 87801
Larry
Job Details:
02/12/2025
installed evap harness and tested good - unit is good to go - survey mention
We serviced a
CAFE DISHWASHER
Model CDT805P2NBS1
Near Colorado Springs, CO 80908
Charles
Job Details:
02/12/2025
"Replaced console and toe panel, lower unit so UI is not hitting mounting screws"
We serviced a
WHIRLPOOL DRYER
Model WED8127LC1
Near Colorado Springs, CO 80921
Dvante
Job Details:
02/12/2025
"Replaced control board and panel. Tested diagnostic mode, no error codes. Tested unit and unit isnt shutting off by itself. Unit is operating as designed."
We serviced a
BOSCH REFRIGERATOR
Model B36FD50SNS
Near Colorado Springs, CO 80923
David
Job Details:
02/12/2025
"Replaced icemaker, cx to keep an eye on it."
We serviced a
MAYTAG WASHER
Model MVW7232HW0
Near Peyton, CO 80831
Aaron
Job Details:
02/12/2025
"Tub gasket is not fully engaged, allowing water to drip throughout cycle, corrected and monitored unit on quick wash deep fill high level to allow most pressure on gasket, working well now, no leaks, installed litmus strip and advised customer of survey."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS588FIHZ00
Near Pueblo West, CO 81007
Domingo
Job Details:
02/12/2025
Put drawer back in the way it should be and everything is working fine
We serviced a
SUB ZERO REFRIGERATOR
Model 650
Near Colorado Springs, CO 80907
Ralph
Job Details:
02/12/2025
"shelf just needed to be tweeked a little,,,autho no. H39H9K"
We serviced a
LG REFRIGERATOR
Model LFXS26596S
Near Colorado Springs, CO 80911
Brandon
Job Details:
02/12/2025
"Sealed system issue, compressor is running but not removing heat, could not indetify a refrigerant leak, possible inefficient compressor or leak, paid cash $140, parts $738.78, labor $695.95, svf $139.95, mps $14.50, tax"
We serviced a
BLUESTAR COOKTOP
Model RGTNB486GV2
Near Colorado Springs, CO 80904
Jerimiah
Job Details:
02/12/2025
"Front right surface burner not igniting, found igniter misaligned, reseated burner pipe. Unit check ok."
We serviced a
BOSCH DISHWASHER
Model SHP65CM5N/25
Near Vail, CO 81657
Erik
Job Details:
02/12/2025
install gasketJOBCOMPLETE
We serviced a
BOSCH DISHWASHER
Model SHPM78Z55N/20
Near Beaver Creek, CO 81620
Erik
Job Details:
02/12/2025
install fan and conduit/ test: PASSE07 did NOT returnJOB COMPLETEservice collected on previous call BSH covered parts and labor
We serviced a
KENMORE DRYER
Model 710.84821300
Near Cripple Creek, CO 80813
David
Job Details:
02/12/2025
"Replaced heater and thermal cut-off kit, unit is heating good."
We serviced a
WHIRLPOOL WALL OVEN
Model KOED530PPS00
Near Ashland, OR 97520
Jeff
Job Details:
02/12/2025
Called tech line. File 7740943791 we went through machine and found everything is working as should. Customer is going to get owners manual and practice.
We serviced a
FRIGIDAIRE REFRIGERATOR
Model FFHB2740PS9A
Near Pueblo West, CO 81007
Domingo
Job Details:
02/12/2025
Replaced base water filter and housing test it no leaks total reminder 104.26 customer pay $46.26 on card and $58.00 cash authorization code 4c333E
We serviced a
JENN-AIR RANGE
Model JDRP548HL00
Near Bend, OR 97702
Levi
Job Details:
02/12/2025
"Replaced blower fan on left oven(small). Tested, all checks okay. No error codes found"
We serviced a
GENERAL ELECTRIC RANGE
Model JB630DF2WW
Near Colorado Springs, CO 80905
Jerimiah
Job Details:
02/12/2025
Installed replacement surface element. Unit check ok charged a or as quoted $241.95 CC Auth# 3NJVCA
We serviced a
GE MICROWAVE
Model JT965SF3SS
Near Colorado Springs, CO 80906
Jerimiah
Job Details:
02/12/2025
"Microwave not heating making loud buzz noise when running, mag antennae is damaged but waveguide is ok. Cust holding off and will look for new unit labor will be $229.95 if chosen to do so, charging service call $139.95 CC Auth# EK4R9HWB27X10516 mag $441.91"
We serviced a
GE MICROWAVE OVEN
Model JVM3160RF9SS
Near Pueblo West, CO 81007
Domingo
Job Details:
02/12/2025
"Replace transformer, fuse, MGT, Diode, capacitor test it and it worked"
We serviced a
GE DISHWASHER
Model GDF510PSR6SS
Near Monument, CO 80132
Charles
Job Details:
02/12/2025
"Unit will not drain, cpvc candy cane plugged with glue, remove restriction , drain water that was in unit, new home, main water off."
We serviced a
MONOGRAM RANGE
Model ZGP486NDT1SS
Near Colorado Springs, CO 80926
Jerimiah
Job Details:
02/12/2025
"Installed LP conversion, unit check ok."
We serviced a
PROFILE RANGE HOOD
Model PV970N2SS
Near Colorado Springs, CO 80916
Jerimiah
Job Details:
02/12/2025
installed replacement bulbs. Unit check ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF560SEHZ02
Near Los Lunas, NM 87031
Larry
Job Details:
02/12/2025
Installed parts listed and getting good heat transfer - Unit is operating as designed - Survey mentioned
We serviced a
JENN-AIR WALL OVEN
Model JMW2430LL00
Near Colorado Springs, CO 80921
Charles
Job Details:
02/12/2025
"Installed listed part. Unit uninstalled, could not test."
We serviced a
GE DRYER
Model GFD85ESPN0RS
Near Colorado Springs, CO 80905
Jerimiah
Job Details:
02/12/2025
"Sears came and did a dryer clean, found felt seal of drum falling apart, Cust wanted quote on drum part. Will look for new unit. Labor would be $179.95 if chosen to do so. $153.95 CC Auth# CJL9CFDrum $643.51"
We serviced a
WHIRLPOOL RANGE
Model WEE730H0DS0
Near Pueblo West, CO 81007
Domingo
Job Details:
02/12/2025
Replaced bake element test unit 1
We serviced a
JENNAIR ICE MACHINE
Model JIM158XYCX2
Near Aspen, CO 81611
James R
Job Details:
02/12/2025
Signed disclaimer. Replaced pump and pump assist kit. Test operation. Pumps came on for a bit and then quit pumping water. Control sensed issue and shut down. Also when Unit had water in it. Started to leak at tube that comes out of tub this is non repairable. Office will issue a credit for parts. Need to contact office. Please fill out tech satisfaction survey. Thank You.
We serviced a
SAMSUNG WASHER
Model WF50K7500AV/A2
Near Colorado Springs, CO 80924
Brandon
Job Details:
02/12/2025
"Error 4c, unit would not stop filling with water, found hole in pressure hose for water level sensor, trimmed hose where hole was and tested operation all checks ok, svf paid $139.95 Auth# CF34P9"
We serviced a
DACOR DOUBLE WALL OVEN
Model ECS230SBK
Near Colorado Springs, CO 80904
Jerimiah
Job Details:
02/12/2025
"Upper broil and cavity lights not working. Broil not getting power, but element checks good, needs relay board. Part is unavailable, refused option of repairing board. Charging service call. $175.95 CC Auth# LWTX4YDE81-03753A transformer check terminalsDE81-08448A relay board NLA"
We serviced a
WHIRLPOOL WASHER
Model WTW5010LW0
Near Colorado Springs, CO 80906
Mathew
Job Details:
02/11/2025
Replace faulty suspension rods. Test op on drain/spin cycle. Unit not wobbling anymore. All okay.
We serviced a
KITCHENAID OVEN
Model KSDB900ESS1
Near Sisters, OR 97759
Austin
Job Details:
02/11/2025
Set oven temp to 415. Oven reached 415 for ten minutes(enough time for couple heat cycles). oven temp was 415.7 on temp probe.
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ
Near Madras, OR 97741
Austin
Job Details:
02/11/2025
Incoming power to unit came loose. Reconnected tested unit. No error codes. All ops sat per factory spec.
We serviced a
GE WASHER
Model PTW600BSR0WS
Near Leadville, CO 80461
Erik
Job Details:
02/11/2025
connect to smartHQ service: error codes indictae over load or unbalanced loadCX left extremely heavy load (single item) for test: UNIT unable to balance load from CX unit attempts to redistribute load because it is too heavy for unitCX needs GE use and care explained in SPANISHJOB COMPLETE
We serviced a
GE WASHER
Model PTW600BSR0WS
Near Leadville, CO 80461
Erik
Job Details:
02/11/2025
connect to smartHQ service: error codes indictae over load or unbalanced loadCX left extremely heavy load (single item) for test: UNIT unable to balance load from CX unit attempts to redistribute load because it is too heavy for unitCX needs GE use and care explained in SPANISHJOB COMPLETE
We serviced a
GENERAL ELECTRIC WASHER
Model GTW465ASN3WW
Near Colorado Springs, CO 80909
David
Job Details:
02/11/2025
"Replaced ordered parts, tested ran machine, and is running quiet and good."
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5201SG/AA
Near Peyton, CO 80831
Brandon
Job Details:
02/11/2025
"Replaced compressor, drier and charged unit to spec 75 g hass oqc passed"
We serviced a
SAMSUNG DISHWASHER
Model DW80R9950UG/AA
Near Colorado Springs, CO 80908
Brandon
Job Details:
02/11/2025
"Vane motor stuck, got motor unstuck and tested on all checks ok, svf paid $279.90 Auth# 3WTVYJ"
We serviced a
FRIGIDAIRE REFRIGERATOR
Model GRMS2773AF01
Near Colorado Springs, CO 80909
David
Job Details:
02/11/2025
"Installed ice box fan, tested fan operation, it is working. Cx will keep an eye on it."
We serviced a
GE WASHER
Model gtw465asn9ww
Near Pueblo, CO 81005
Domingo
Job Details:
02/11/2025
"Replace gear case all shocks, clutch, shifter l, pulley and belt ran a diagnostic mode no fault codes and no noise on spin or agitating and no leaks. Put a leaks strip underneath see pic"
We serviced a
MONOGRAM RANGE
Model ZTSX1FPSN3SS
Near Breckenridge, CO 80424
Erik
Job Details:
02/11/2025
install board and trim * see quick picstest: PASS* see quick pics` JOB COMPLETE
We serviced a
GE RANGE
Model GRS60LAV1FS
Near Frisco, CO 80443
Erik
Job Details:
02/11/2025
knobs reversed on burners - correct and test: PASSsurface burners pulse at lower setting and DUAL ring burner work on BOTH settings * see quick picscall GE TAG at CX request: unit working as dsigned - unit will NOT respond like GAS as electric takes time and cycles to raise and lower temps (on setting '5' or medium element goes high heat for 2-3 sec then cycles off for 13-17 sec) case 15759392JOB COMPLETE`CX not available for signature
We serviced a
WHIRLPOOL RANGE HOOD
Model WVW53UC0LS
Near Colorado Springs, CO 80924
Jerimiah
Job Details:
02/11/2025
Question about the grease from blower. Unit wasnt making very good contact with motor plug thru harness as it was loose. Reseated. Unit check ok. Disclosed survey to cust fcc 5star.
We serviced a
WHIRLPOOL RANGE HOOD
Model WVW53UC0LS
Near Colorado Springs, CO 80924
Jerimiah
Job Details:
02/11/2025
Question about the grease from blower. Unit wasnt making very good contact with motor plug thru harness as it was loose. Reseated. Unit check ok. Disclosed survey to cust fcc 5star.
We serviced a
SAMSUNG REFRIGERATOR
Model RF19ABBP
Near Colorado Springs, CO 80906
Mathew
Job Details:
02/11/2025
"Found fridge holding temp, no frost pattern on freezer evap. Suspect sealed system issue. Either leak or inefficient compressor. Cx not moving forward with repairs. Collect svf 139.95 $139.95 CK Auth# 4R4UCM; (serial indicated as 'NotAvailable' so system created UIS w/pseudo #)"
We serviced a
JENN-AIR RANGE
Model JDRP436HM01
Near Breckenridge, CO 80424
Antonio
Job Details:
02/11/2025
Installed new burnner head turnned burner on unit lights properly Also advised cx of whlp survey
We serviced a
JENN-AIR REFRIGERATOR
Model JS42NXFXDE01
Near Colorado Springs, CO 80904
Carlos
Job Details:
02/11/2025
Installed all LEDs all ok
We serviced a
JENN-AIR WALL OVEN
Model JMW3430LL00
Near Colorado Springs, CO 80908
Jerimiah
Job Details:
02/11/2025
Installed replacement console. Unit check ok.
We serviced a
JENN-AIR FREEZER
Model JBZFL30IGX10
Near Colorado Springs, CO 80921
Dvante
Job Details:
02/11/2025
"Checked unit again, the line was frozen this time. Will need the fill tube to be replaced. Tried replacing the fill tube. The fridge screws for the wheels were stripped. Customer already had previous repairs on this unit. Damn near had to fridge tipped over me due to the wheels not adjusting when screws were turning. Customer will call Jenn air. Customer wants a new units due to how many repairs on the unit. SR7740931218"
We serviced a
MAYTAG DRYER
Model Medb835dw1
Near Colorado Springs, CO 80908
Aaron
Job Details:
02/11/2025
"Rollers and idler have worn from use, needs repair kit, approved onsite, removed and replaced components, cleared lint from the unit, teste, working and heating well now, AF code appeared during test, vent goes into wall cutout. Repair kit $77.73Tax $6.37Supplies $14.50Hc $139.95Labor $199.95Total job $438.50 No return on parts Auth total due $438.50 #L3AM3K"
We serviced a
MAYTAG DRYER
Model MEDC300XW0
Near Santa Fe, NM 87506
Jason
Job Details:
02/11/2025
Checked dryer temps and air flow unit opperation checks ok Auth code: VL33J4$173.55 spoke to cx about review
We serviced a
WHIRLPOOL DRYER
Model WED8620HW1
Near Aspen, CO 81611
James R
Job Details:
02/11/2025
Signed disclaimer. Replaced left rear roller support shaft and Installed dryer kit Reassembled unit and test run operating as should. Please fill out tech satisfaction survey. Thank You.
We serviced a
LG DRYER
Model DLEX3370V
Near Colorado Springs, CO 80903
David
Job Details:
02/11/2025
"Installed 4 roller kit, ran dryer, nice and quiet."
We serviced a
GE RANGE
Model JB256RM2SS
Near Colorado Springs, CO 80920
Jerimiah
Job Details:
02/11/2025
Cust only had a replacement infinite switch needing installation. Unit check ok charged labor SC. $379.39 CC Auth# LK4UEU
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5241SR/AA
Near Pueblo, CO 81005
Domingo
Job Details:
02/11/2025
Pick compressor its just a big box
We serviced a
BOSCH DISHWASHER
Model SHP878ZD5N/18
Near Aspen, CO 81611
James R
Job Details:
02/11/2025
Signed disclaimer. Removed unit and replaced fan assy. Had to remove outer door front panel ACU then removed door mountings in order to lift unit away from base so could replace fan. Reassembled unit. Reinstalled it. Test run is working as should. Customer paid labor $179.95 auth code. U3NMYAPlease fill out tech satisfaction survey. Thank You. Put a leak board under unit took pic.
We serviced a
SAMSUNG REFRIGERATOR
Model RF32CG5400SRAA
Near Colorado Springs, CO 80908
Brandon
Job Details:
02/11/2025
Replaced ice route and tested operation hass oqc passed
We serviced a
SAMSUNG REFRIGERATOR
Model RF29BB89008MAA
Near Colorado Springs, CO 80918
Mathew
Job Details:
02/11/2025
Found water not dispensing from auto fill pitcher. Replace beverage center. Test op all okay.
We serviced a
SAMSUNG DRYER
Model DVE45T3200W/A3
Near Colorado Springs, CO 80908
Brandon
Job Details:
02/11/2025
Replaced parts and tested operation all checks ok
We serviced a
SAMSUNG REFRIGERATOR
Model RF28R7351DT/AA
Near Peyton, CO 80831
Brandon
Job Details:
02/11/2025
Replaced all parts and cycled ran hass but it failed
We serviced a
SAMSUNG RANGE
Model NA30N6555TS/AA
Near Colorado Springs, CO 80924
Jerimiah
Job Details:
02/11/2025
Unit intermittently having electrical smell when operating center burner only. Was not able to reproduce smell. Replaced components believing that could be the only place to emanate the smell. Cust will keep track of problem if it happens again.
We serviced a
SAMSUNG REFRIGERATOR
Model RF23J9011SG/AA
Near Colorado Springs, CO 80904
Mathew
Job Details:
02/11/2025
"Found iceroom frozen. Defrosted. Dried and sealed room. Installed icemaker, clips, new bin, drain tube and control. Test op on ice cycle. All okay."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX986SIHV00
Near Silt, CO 81652
James R
Job Details:
02/11/2025
Signed disclaimer. Test 56 E2 Icemaker fill tube frozen shut heater test 19 123 vac good amperage .80 good. Ohm reading 4.84 Replaced icemaker fan. Sealed cover of icemaker and fan taped cover really well. Reassembled and installed. Cut pwr to unit and reset. This cleared error code of icemaker. Put unit into diagnostics icemaker harvest test all checked good. Icemaker fill test all checked good. Checked icemaker thermistor checked ok. Checked ice bin sensors checked good. Checked function of icemaker fan ok. Checked icebox thermistor checked ok. Seals good on ice door. Please fill out tech satisfaction survey. Thank You.
We serviced a
MAYTAG WASHER
Model LSG7806AAE
Near Aspen, CO 81611
James R
Job Details:
02/11/2025
Signed disclaimer. Removed front panel. Found fuse blown. Removed top checked lid switches they are good. Unit had gotten out of balance and popped fuse. Installed fuse and test opersating as should. Customer paid $169.95 auth code. 9X3VX4Please fill out tech satisfaction survey. Thank You.
We serviced a
BOSCH DISHWASHER
Model SHPM65Z55N/01
Near New Castle, CO 81647
Sean
Job Details:
02/11/2025
Checked unit MN SN POP Customer signed disclaimer Pulled unit out and removed the door.Removed the front panel and the door seal.Installed new door seal and reassembled the unit.Removed the door gasket and cleaned the unit It had a significant amount of water deposits around the door seal and door gasket. Took pictures.Installed new door gasket and tested the unit ran a rince cycle. Unit did not leak.Total for visit is Labor $ 190.45 MPS. $17.00Total is $207.45Ashley will call and pay.
We serviced a
BOSCH DISHWASHER
Model SHE43F16UC/ 60
Near Colorado Springs, CO 80906
David
Job Details:
02/11/2025
"Buttons not working correctly. Order of buttons not correct, put buttons in the correct order, tested and is operating correctly."
We serviced a
GE DISHWASHER
Model GSD2600G00WW
Near Colorado Springs, CO 80905
David
Job Details:
02/11/2025
"Replaced pump motor assembly, ran dishwasher, no leaks. Leak strip."
We serviced a
KITCHENAID WALL OVEN
Model kode500ess20
Near Monument, CO 80132
Jerimiah
Job Details:
02/11/2025
Installed replacement TCO. Unit check ok. Charged labor as quoted $229.95 CC Auth# 3J3H9K
We serviced a
MAYTAG WASHER
Model MVW6230HW3
Near Albuquerque, NM 87121
Larry
Job Details:
02/11/2025
installed parts listed and tested good - unit is good to go - survey mentioned
We serviced a
KITCHENAID REFRIGERATOR
Model KRMF706ESS05
Near Grants Pass, OR 97526
Jeff
Job Details:
02/11/2025
"Found wiring wasn't right repaired back to factory, installed parts and ran diagnostic, passed all tested working as should as of now."
We serviced a
AMANA DISHWASHER
Model ADB1400AGS3
Near Selma, OR 97538
Jeff
Job Details:
02/11/2025
Installed sump valve tested machine working as should no leaks
We serviced a
AMANA REFRIGERATOR
Model ABB1924BRM01
Near Breckenridge, CO 80424
Antonio
Job Details:
02/11/2025
Installed new acu and programmed. Turned unit on fridge is at 35? and frezzer at0? unit testing good also advised cx of whlp survey
We serviced a
MAYTAG WASHER
Model MVW5430MW1
Near Santa Fe, NM 87507
Jason
Job Details:
02/11/2025
Installed part and repaired brocken drain pump harness unit opperation checks ok. spoke to cx about review
We serviced a
KITCHENAID M/W OTR
Model KMMF530PPS00
Near Albuquerque, NM 87121
Larry
Job Details:
02/11/2025
installed door and tested good - unit is to go survey mentioned -
We serviced a
WHIRLPOOL WASHER
Model WET4027HW2
Near Galisteo, NM 87540
Jason
Job Details:
02/11/2025
Installed parts listed ran calibration and quick cycle unit operation checks ok. spoke to cx about review
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW1
Near Los Lunas, NM 87031
Larry
Job Details:
02/11/2025
Cx complaint - Making loud gringing noise - Inspected unit and found the retainer nut fot the pulley loose - Secured nut and tested good - Unit is good to go - Survey mentioned
We serviced a
WHIRLPOOL WASHER
Model WTW4957PW0
Near Albuquerque, NM 87120
Larry
Job Details:
02/11/2025
Installed parts listed and tested good - Unit is good to go - Survey mentioned
We serviced a
MAYTAG DRYER
Model MED6500MBK0
Near Albuquerque, NM 87114
Larry
Job Details:
02/11/2025
Installed harness and tested good - nit is good to go - Survey mentioned
We serviced a
WHIRLPOOL DRYER
Model WED5605MC0
Near Santa Fe, NM 87508
Jason
Job Details:
02/11/2025
installed motor unit opperation checks ok. spoke to cx about review
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ0
Near Santa Fe, NM 87508
Jason
Job Details:
02/11/2025
Installed pump motor assy unit opperation checks ok. spoke to cx about review
We serviced a
WHIRLPOOL WASHER
Model WTW8127LC0
Near Colorado Springs, CO 80911
Carlos
Job Details:
02/11/2025
Installed wash plate all ok
We serviced a
MAYTAG WASHER
Model MVW7230HW0
Near Colorado Springs, CO 80908
Aaron
Job Details:
02/11/2025
"Removed and replaced lower harness, tested unit through DLMS and diagnostic cycles, working well now. Advised customer of 5 star survey."
We serviced a
MAYTAG WASHER
Model MVW6230RHW2
Near Colorado Springs, CO 80917
Aaron
Job Details:
02/11/2025
"F0E3 overload error upon arrival, found Capacitor shorted, pulley bent and broke actuator arm, removed and replaced components, tested unit through diagnostics, working well now, recommend standpipe to be cleared, and electrician for outlet as power cuts out with slight movement. Advised customer of situation and survey."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT518SZFM04
Near Pueblo, CO 81001
James
Job Details:
02/11/2025
Installed ordered parts tested ops all ckok
We serviced a
WHIRLPOOL WASHER
Model WTW5057LW0
Near Colorado Springs, CO 80925
Carlos
Job Details:
02/11/2025
Installed harness ran tests all ok
We serviced a
MAYTAG DRYER
Model MED6500MBK0
Near Colorado Springs, CO 80920
Dvante
Job Details:
02/11/2025
"Checked unit, found the unit is leaking while on steam cycle. Called tech support and was asked if the new valve was replaced which it was. Advised to tell customer that the load is too small and need to put more items in order for the steam cycle to operate properly.SR7740929640"
We serviced a
MAYTAG DRYER
Model MED7230HW3
Near Colorado Springs, CO 80922
Aaron
Job Details:
02/11/2025
"Heating element and thermostat are shorted out, removed and replaced components, corrected vent hose and placed for best airflow, tested unit, working and heating well now. Advised customer of situation and survey."
We serviced a
MAYTAG DRYER
Model MED7230HW3
Near Colorado Springs, CO 80922
Aaron
Job Details:
02/11/2025
"Cracked blower wheel rubbing against housing, removed and replaced, tested unit, working and heating well now. Advised customer of 5 star survey."