We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS571CIHZ04
Near Colorado Springs, CO 80921
Aaron
Job Details: 02/21/2025
"Product temperatures at time of inspection 39.9f RC at 39f setting, 1.9f ar 0f FC setting, found user interface control disconnected, corrected and tested both ice and water functions. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ1
Near Pueblo, CO 81001
James
Job Details: 02/21/2025
Installed preordered part. Tested ops all ckok unit was not installed on arrival. Did not install
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKZ1
Near Colorado Springs, CO 80921
Dvante
Job Details: 02/21/2025
"Checked unit, found the diverter isnt operating causing the spray arms to not function. Went ahead and replaced pump & motor assembly. Tested diagnostic mode, no error codes or leaks. Unit is operating as designed."
We serviced a
KITCHENAID RANGE
Model KSGG700ESS7
Near Colorado Springs, CO 80927
Aaron
Job Details: 02/21/2025
"Unit is unable to fully preheat and maintaining temperature, removed and replaced module and oven temperature sensor, tested unit to 350f and monitored temperatures, working and heating well now. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL DRYER
Model WED560LHW2
Near Colorado Springs, CO 80903
David
Job Details: 02/21/2025
"Checked dryer, making rattling noise, and not heating. Removed piece of metal, side vent knock out from under motor, and plugged on a wire that had come off heater assembly. Tested and is operating correctly."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT112CZJZ01
Near Colorado Springs, CO 80903
David
Job Details: 02/21/2025
"Started changing compressor, hooked up nitrogen to high side dryer, brown black oil came out, called tech line RS # 7741008208, they are sending it up the line."
We serviced a
WHIRLPOOL DRYER
Model WED5605MW0
Near Rio Rancho, NM 87124
Antonio
Job Details: 02/21/2025
cx complaint - knocking and rattling placed parts with repair kit - unit is working properly - survey mentioned
We serviced a
WHIRLPOOL W/D STACKED UNIT
Model WETLV27HW3
Near Colorado Springs, CO 80908
Aaron
Job Details: 02/21/2025
"F8E1 low flowF0E5 unbalanced load F2E1 Control panel error codes upon arrival, control is not sensing water level, removed and replaced control, recalibrated, tested unit through diagnostics, working well now, no leaks, installed litmus strip and advised customer of survey."
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Medford, OR 97501
Jeff
Job Details: 02/21/2025
Arrived at house and customer told me that lowes swapped the dryer out and gave them a new one
We serviced a
WHIRLPOOL RANGE
Model WFG515S0MS0
Near La Pine, OR 97739
Levi
Job Details: 02/21/2025
"Home is vacant. Replaced board and sensor, tested and all checks okay. Range was not installed so I had to install it and hooked up the gas to test unit. I left it connected but turned off the gas so the customer could verify no leaks."
We serviced a
WHIRLPOOL WASHER
Model WTW8127LC1
Near Bend, OR 97701
Levi
Job Details: 02/21/2025
Replace drain pump tested and all checks okay all right anything elseu
We serviced a
AMANA RANGE
Model ACR4303MFB8
Near Grants Pass, OR 97526
Thomas
Job Details: 02/21/2025
"Not holding temp per customer. Checked bake, broil and temp sensor. All okay. Get 209-210 at terminal block. Get 120 at board. Spoke to Derrick with Whirlpool TS. Found out during troubleshooting that customer noticed temp on display dropping when she is cooking at 425. Drops to 350 and has to manually move it to 425 again. TS suggested getting temp ranges and see if issue can be duplicated. He also said that this is a residential oven and they should have a commercial one for their needs. He gave me file # 7741006245. Ran temps and got 420.5 degrees. Advised customer everything is running properly per Whirlpool standards and mentioned to them about the oven type."
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRFF3436RZ00
Near Bend, OR 97702
Levi
Job Details: 02/21/2025
"Replaced icemaker, tested, all checks okay"
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Madras, OR 97741
Austin
Job Details: 02/21/2025
Installed parts ordered. Tested unit. Unit working per factory spec.
We serviced a
MAYTAG WASHER
Model MVW5435PW0
Near Redmond, OR 97756
Austin
Job Details: 02/21/2025
Installed parts ordered. Tested unit. All ops sat per factory spec.
We serviced a
WHIRLPOOL DISHWASHER
Model WDF341PAPW2
Near Prineville, OR 97754
Austin
Job Details: 02/21/2025
Installed parts ordered. Tested unit. All ops sat per factory spec.
We serviced a
MAYTAG REFRIGERATOR
Model MRT311FFFZ02
Near Grants Pass, OR 97527
Thomas
Job Details: 02/21/2025
Replaced parts. Customer will monitor
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS315SDHZ18
Near Redmond, OR 97756
Austin
Job Details: 02/21/2025
Whirlpool tech lanky-sr-7740870523Tech support says to lower temp and have client call customer service if still having issue after 72hrs of lower temp.
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ1
Near Bend, OR 97702
Levi
Job Details: 02/21/2025
"Replaced pump assembly and cleaned spray arms. Tested, all checks okay"
We serviced a
MAYTAG DRYER
Model MED6630MBK0
Near Eagle Point, OR 97524
Jeff
Job Details: 02/21/2025
Went thru machine no errors cleaned trap also this machine vents directly into the crawl space under the house not outside which could cause problems customer to monitor
We serviced a
MAYTAG WASHER
Model MHW6630MBK0
Near Eagle Point, OR 97524
Jeff
Job Details: 02/21/2025
Found a bunch of floor mating in drain cleaned out tested machine through diagnostic all passed and draining customer to monitor
We serviced a
MAYTAG WASHER
Model MVW7232HW0
Near Colorado Springs, CO 80922
Aaron
Job Details: 02/21/2025
"Gearcase making noise during agitation and replaced, gearcase leaked, removed and replaced gearcase, slider assembly, and rotor, tested unit through DLMS and diagnostic cycles. Working well now, installed litmus strip and advised customer of survey."
We serviced a
WHIRLPOOL DRYER
Model WED8127LC1
Near Colorado Springs, CO 80921
Dvante
Job Details: 02/21/2025
"Replaced the motor. Tested unit, its not shutting off by itself. Tested diagnostic mode, unit is operating as designed."
We serviced a
GE RANGE
Model JGB700SEJ2SS
Near Colorado Springs, CO 80920
Jerimiah
Job Details: 02/21/2025
Weak bake igniter causing unburned fuel smell and long bake preheat times. Replaced igniter. Unit check ok. WB13X25500 bake igniter
We serviced a
GE WASHER
Model PTW600BSR0WS
Near Leadville, CO 80461
Erik
Job Details: 02/21/2025
install pump and test: PASSJOB COMPLETE
We serviced a
WHIRLPOOL DRYER
Model WED4815EW1
Near Colorado Springs, CO 80918
Mathew
Job Details: 02/21/2025
Install dryer repair kit. Test op on all cycles. All okay.
We serviced a
SAMSUNG DRYER
Model DVE41A3000W
Near Pueblo West, CO 81007
Domingo
Job Details: 02/21/2025
Replace hea element ran oqc it pass
We serviced a
MAYTAG DRYER
Model MED5630HC
Near Prineville, OR 97754
Austin
Job Details: 02/21/2025
Installed all parts ordered. Tested unit all ops sat per factory spec.
We serviced a
KENMORE FREEZER
Model 253.22042410
Near Colorado Springs, CO 80906
Charles
Job Details: 02/21/2025
"Broken door closure mechanism, 297415900 showing discontinued Service fee $139.95 paid autho PRPCE9"
We serviced a
BLUESTAR FREEZER
Model PKS7490FZ6IU
Near Colorado Springs, CO 80907
Charles
Job Details: 02/21/2025
Installed ice maker
We serviced a
BOSCH REFRIGERATOR
Model B36CL80ENS/42
Near Colorado Springs, CO 80904
Ralph
Job Details: 02/21/2025
replaced units doors and cust approved the repair
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730PAHZ0
Near Pueblo, CO 81005
Domingo
Job Details: 02/21/2025
Replaced sump test it and dishwasher start it wash dishes Labor is $199.99 see pic for authorization customer paid
We serviced a
MAYTAG STACK UNIT
Model MLG2000AWW
Near Bend, OR 97702
Levi
Job Details: 02/21/2025
"Customer replaced timer with a used timer. Timer is not advancing off a main wash cycle but it does advance from spin to off. Drain pump works, agitates and spins. Door lock mechanism is testing good. Seems the machine control board has failed. Board is discontinued. Discuss with customer option of board rebuild"
We serviced a
JENN-AIR RANGE
Model JDRP548HL00
Near Bend, OR 97702
Levi
Job Details: 02/21/2025
"Tech support file number. 7741005677. Now possible main cooling fan need replaced. Also had error for user interface board. left oven on for 1.5 hours and errors didn't come back. Customer is leaving town for 2 months and I'm hoping service fee and labor can be waived if the oven fails within a week or two of there return. Will speak to upper management when the time comes to see what can be done. At this time, the ovens are working good"
We serviced a
MAYTAG DISHWASHER
Model MDB7650AWS
Near Colorado Springs, CO 80920
Dvante
Job Details: 02/21/2025
"Checked unit, found the display not working. Checked the main board and found the board opened. The main board is no longer available. Offered to fix the board by taking it to office and ship it to put power. Customer has declined and will get a new unit. Customer paid service fee. Had advised customer for 5 star review$139.95 CC Auth# UPK3M4"
We serviced a
MAYTAG DRYER
Model MEDB765FWO
Near Colorado Springs, CO 80916
Charles
Job Details: 02/21/2025
Install dryer repair kit. Paid labor $199.95 autho T93FC9
We serviced a
SAMSUNG WASHER
Model WA45M7050AW/A4
Near Colorado Springs, CO 80911
Mathew
Job Details: 02/21/2025
Found water leaking water connection from supply hose. Tighten hose. Test op all okay. If issue persists Cx will need to buy new supply hoses. Collect service fee. $139.95 $139.95 CC Auth# RW33W3
We serviced a
GE DRYER
Model GFD55ESSN2WW
Near Grand Junction, CO 81504
Sean
Job Details: 02/21/2025
Checked unit MN SN POP Customer signed disclaimer.Opened unit and verified that the drum was cracked.Unplugged the unit and removed control panel and top cover.Removed door panel and flower housing .unhooked the belt and removed the drum.Unpackaged the new drum and installed it into the unit. Reassembled the unit and hooked power back up.Tested the unit unit started spinning and heating tested unit good.Please fill out a tech servey. Thank you.
We serviced a
PROFILE WASHER
Model PTW700BPT0DG
Near Grand Junction, CO 81507
Sean
Job Details: 02/21/2025
Checked unit MN SN POP Customer signed disclaimer Unplugged the unit and removed the top panel.Removed the rods and springs and installed new rods and springs greased the upper ball joints and reassembled the unit. Checked level and tested unit in service mode on spin test. Unit tested good.Please fill out a tech servey.Thank you.
We serviced a
GE MICROWAVE
Model JVM3160DF9WW
Near Dillon, CO 80435
Erik
Job Details: 02/21/2025
install MAG/ CAP/ DIODE/ FUSEreinstall unit and test: 1 cup water boils in 60 sec.JOB COMPLETECX not available for signature
We serviced a
GE MICROWAVE
Model JVM3160DF9WW
Near Dillon, CO 80435
Erik
Job Details: 02/21/2025
install MAG/ CAP/ DIODE/ FUSEreinstall unit and test: 1 cup water boils in 60 sec.JOB COMPLETECX not available for signature
We serviced a
GE DISHWASHER
Model GDF450PSR6SS
Near Silverthorne, CO 80498
Erik
Job Details: 02/21/2025
unit wiring incorrect - ground not securecorrect wiring issue and test: PASSconnect to smartHQ service: NO ALERTS /NOERRORS
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Silverthorne, CO 80498
Antonio
Job Details: 02/21/2025
Unit needs acuSc$232.40Pt$317.93 w11603810Lb$189.95Mpg17.50Total$757.83Cx holding on repairs $232.45 CC Auth# XR4X39
We serviced a
JENNAIR RANGE
Model JDRP430WP02
Near Colorado Springs, CO 80920
Jerimiah
Job Details: 02/21/2025
"Burner heads were not fitting properly. Found several burner heads mismatched to their proper locations, reseated to correct locations. Unit check ok charged service call $159.95 CC Auth# Y33E3V"
We serviced a
KITCHENAID MICROWAVE
Model KEMS309BSS01
Near Colorado Springs, CO 80921
Jerimiah
Job Details: 02/21/2025
"Installed replacement mw appl mgr, still having error F6E8, found bad wiring to door switch. Repaired. Unit check ok. Charged labor as quoted $209.95 CC Auth# VRFY4F"
We serviced a
JENN-AIR REFRIGERATOR
Model JS48NXFXDE01
Near Albuquerque, NM 87111
Jason
Job Details: 02/21/2025
Installed led modules unit cheks ok. spoke to cx about review
We serviced a
SAMSUNG REFRIGERATOR
Model RF28JBEDBSG/AA
Near Monument, CO 80132
Brandon
Job Details: 02/21/2025
"Error 81c, leaking compressor and bad invertor board, labor $695.95, svf $149.95, mps $14.50, parts $464.27, tax $38.07, $149.95 Auth# 3T44TR"
We serviced a
VIKING REFRIGERATOR
Model VCBB363LSS
Near Colorado Springs, CO 80906
Charles
Job Details: 02/21/2025
"Leaking from freezer, defrost drain plugged, floor of freezer is sheet of ice. Defrost everything and clean drain Service fee $139.95 Labor $249.95MPS 14.50 Total $404.40 paid autho VV33HL"
We serviced a
SAMSUNG WASHER
Model WF42H5000AW/A2
Near Pueblo, CO 81004
Domingo
Job Details: 02/20/2025
Customer didnt want to take the quote as soon as I told her the price for console DC97-18107E $299.00 so customer rejected the quote just going to pay SC 139.95 see pic customer paid cash
We serviced a
SAMSUNG DRYER
Model DVE55A7300E/A3
Near Fountain, CO 80817
Mathew
Job Details: 02/20/2025
Found blower wheel clogged with lint. Remove clog and clean inside of machine. Machine working as expected. If issues of long dry time persist I recommend Cx clean venting connection and vent exit to house. Collect svf 139.95. $139.95 CC Auth# 4HWXRC
We serviced a
MAYTAG WASHER
Model MVW7230HW1
Near Pueblo, CO 81001
James
Job Details: 02/20/2025
Installed ordered parts tested ops all ckok
We serviced a
GENERAL ELECTRIC WASHER
Model GFW850SPN5RS
Near Peyton, CO 80831
David
Job Details: 02/20/2025
"Replaced control board, set personality, ran diagnostics on the components, water valves, drain pump, spin, and tumble working good."
We serviced a
SAMSUNG WASHER
Model WA55A7300A
Near Pueblo, CO 81005
Domingo
Job Details: 02/20/2025
Replicated issue and water is c9mimg fr9m thr main drain pipe just need a plumber
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ04
Near Bend, OR 97701
Levi
Job Details: 02/20/2025
Found that screws came out of side rails and the drawer fell out of place. Corrected issue now is good
We serviced a
BOSCH DISHWASHER
Model SHP9PCM5N/25
Near Colorado Springs, CO 80906
Ralph
Job Details: 02/20/2025
installed listed parts and unit checked okay
We serviced a
BOSCH WALL OVEN
Model HBLP451RUC/08
Near Colorado Springs, CO 80908
Jerimiah
Job Details: 02/20/2025
Installed replacement relay board. Unit check ok Cust will keep track of unit functionality.
We serviced a
BOSCH DISHWASHER
Model SHE41CM2N/27
Near Pueblo, CO 81001
Domingo
Job Details: 02/20/2025
Upon arrival I seen a dent inside the tub and the door was bent at the bottom Call tech line case number 4105078082 they told me to message them pictures of purchase pictures of model number and pic of the damages I sent all that but the only thing to send is this report that needs to be send on PDF. I replace the top shell with one that wasnt bend and door wouldnt close Customer-support@bshg.com
We serviced a
LG REFRIGERATOR
Model LFXS26596S/10
Near Colorado Springs, CO 80921
Charles
Job Details: 02/20/2025
Replaced ice maker and cycled
We serviced a
WHIRLPOOL WASHER
Model MVWB765FW3
Near Colorado Springs, CO 80909
Carlos
Job Details: 02/20/2025
"Cx washing unbalanced loads with heavy suds in unit, cx needs to run balanced loads and run a Clean Washer cycle $139.95 CC Auth# 44U9UH"
We serviced a
JENN-AIR RANGE
Model JDRP548HL00
Near Bend, OR 97702
Levi
Job Details: 02/20/2025
"Replaced main control board, tested I ensured there were no error codes"
We serviced a
ELECTROLUX DRYER
Model ELFE7738AW
Near Colorado Springs, CO 80908
David
Job Details: 02/20/2025
"Checked dryer, drum scraping side panel, panel was pushed in slightly, was able to push panel out. Ran machine and is not touching side now."
We serviced a
MONOGRAM COOKTOP
Model ZGU385NSM2SS
Near Colorado Springs, CO 80908
Jerimiah
Job Details: 02/20/2025
"Front left burner clicks continually after ignition, unit is not sensing flames. Cleaned igniter and burner head, unit did get better. Cust will keep track of unit functionality charging service call $109.95 CC Auth# AP3NH4"
We serviced a
CAFE DISHWASHER
Model CDD420P3T1D1
Near Colorado Springs, CO 80908
David
Job Details: 02/20/2025
"Replaced lid actuators and yokes. ran several times, lid opening and closing properly."
We serviced a
GE REFRIGERATOR
Model GFE28GYNKFS
Near Rifle, CO 81650
Sean
Job Details: 02/20/2025
Checked unit MN SN POP Customer signed disclaimer.Checked ice maker it had ice in binRemoved the dispenser controller and then I removed The dispenser door.Installed the new dispenser door motor and spring. Reassembled the unit and tested.Unit tested good .Dispenser opens and closes tightly.Please fill out a tech servey.Thank you.
We serviced a
GE WASHER
Model GTW325ASW0WW
Near Granby, CO 80446
Erik
Job Details: 02/20/2025
ACCESS WITH GARAGE CODEtest unit/ connect to smartHQ service: NO ALERTS/ NO ERRORS* see quick picsFill/ agitate/ drain/ spin - GOODNOISE is normal operation volumnJOB COMPLETECX not available for signature
We serviced a
PROFILE REFRIGERATOR
Model PYE22KYNKFS
Near Glenwood Springs, CO 81601
Sean
Job Details: 02/20/2025
Checked unit MN SNChecked the ice maker in the unit.Opened up fresh foods compartment.Checked the ice maker.Ice maker is just over half way through making ice.Checked the ice bin. Bin was installed correctly.Checked the temp of the fresh foods compartment.Unit is holding temp at 36?f checked unit temp set to 36?fRemoved the ice bin and checked the wire harness.Found the wires to the ice maker where not fully seated.Plugged the wires in and reassembled unit.Put down scidd pad and pulled the unit out to check the water valve. Water valve was on and leak free.Pushes the unit back. Watched as the unit harvested a load of ice. My diagnosis is that the ice maker wires needed to be clipped in all the way.Tested the unit good.Please fill out a tech servey .Thank you.
We serviced a
GE WASHER-DRYER COM
Model GUD27ESSM1WW
Near Basalt, CO 81621
Sean
Job Details: 02/20/2025
Checked unit MN SN Customer signed disclaimer.Opened unit removed top panel to washer.Unhooked the water lines and power.Removed the water lines and removed the water valve.Installed new water valve. Reassembled unit.Turned on water and plugged in unit.Checked unit for leaks.Unit is leak free tested good.Please fill out a technician survey Thank uou
We serviced a
WHIRLPOOL WASHER
Model WTW4950HW3
Near Santa Fe, NM 87505
Antonio
Job Details: 02/20/2025
cx complaint - drain pump constantly running - what i found that cx will need new control - elec - cx will call back if they want to go forward with repair - survey mentioned
We serviced a
SAMSUNG REFRIGERATOR
Model RS27T5200SR/AA
Near Colorado Springs, CO 80906
Brandon
Job Details: 02/20/2025
"Ice maker is not reading correct temp, recommend replacing ice maker, part $310.94, labor $189.95, mps $14.50, tax 25.50"
We serviced a
BOSCH DISHWASHER
Model SHP65TL5UC-02
Near Colorado Springs, CO 80919
Charles
Job Details: 02/20/2025
Replaced drain hose and rear leveling leg.
We serviced a
WHIRLPOOL DISHWASHER
Model WDP540HAMW4
Near Colorado Springs, CO 80918
Dvante
Job Details: 02/20/2025
"Checked unit, customer complaint was the unit is making the countertop hot. Looked between unit and counter, saw the insulation. Called tech support and explained issue. Was told for the customer to not use high temp or sanitize rinse. Tested diagnostic mode, no error codes or leaks. Unit is operating as designed. No parts neededSR7740993878"
We serviced a
JENN-AIR REFRIGERATOR
Model JFFCC72EHL04
Near Monument, CO 80132
Dvante
Job Details: 02/20/2025
Replaced the gasket. Left side door is sealing properly. Unit is operating as designed.
We serviced a
WHIRLPOOL DISHWASHER
Model GU1200XTLQ3
Near Colorado Springs, CO 80907
Carlos
Job Details: 02/20/2025
Adjusted drain hose runs ok. Cx will observe $139.95 CC Auth# NY3C3M
We serviced a
SCOTSMAN ICE MACHINE
Model SCCG30MA-1SU
Near Colorado Springs, CO 80904
Ralph
Job Details: 02/20/2025
unit working currently cust monitoring will call if issue arises
We serviced a
WHIRLPOOL WASHER
Model WFW92HEFW0
Near Colorado Springs, CO 80927
Aaron
Job Details: 02/20/2025
"F3ae1F8E3, F5E4 error codes upon arrival, control needs time to run the pump and reset, reset control and tested unit through diagnostics, working well now. Ran unit through quick wash, customer verified operation, installed litmus strip. Auth $139.95 #9APK3U"
We serviced a
FISHERPAYKEL DISHWASHER
Model DD24STI9
Near Colorado Springs, CO 80906
Ralph
Job Details: 02/20/2025
reinstalled door and cust to monitor
We serviced a
WOLF MICROWAVE
Model MDD30TE/S/TH
Near Elbert, CO 80106
Jerimiah
Job Details: 02/20/2025
"Installed replacement hinge kit, unit check ok charged labor as quoted $269.95 CC Auth# 3TJM3E"
We serviced a
THERMADOR FREEZER
Model T30IF8005P/59
Near Colorado Springs, CO 80921
Charles
Job Details: 02/20/2025
Replaced ice maker and inlet valve
We serviced a
WOLF WALL OVEN
Model D030U/S
Near Colorado Springs, CO 80919
Charles
Job Details: 02/20/2025
"Replaced broken door hinges. NOT A CALL BACK 536417. Different issue with broken hinges, customer paid full repair cost. Previous repair was relay board and TCO."
We serviced a
SAMSUNG DRYER
Model DVE50BG8300VA3
Near Pueblo, CO 81001
Brandon
Job Details: 02/20/2025
"Unit working no issues, spoke with cx on the phone they said unit is working fine, unable to run hass"
We serviced a
SAMSUNG REFRIGERATOR
Model NE63T8111SS/AA
Near Colorado Springs, CO 80903
Mathew
Job Details: 02/20/2025
Document with Samsung high risk tech line. Agent documented and will send to review. Agent will contact Cx within two days.
We serviced a
SAMSUNG REFRIGERATOR
Model RF29A9671SG/AA
Near Pueblo West, CO 81007
Domingo
Job Details: 02/20/2025
Replaced water filter assembly heater and ice maker ran test it pass drain water
We serviced a
SAMSUNG RANGE
Model NSE6DB830012AA
Near Colorado Springs, CO 80920
Mathew
Job Details: 02/20/2025
Replace control assy. Test op burners regulating normally. All okay.
We serviced a
SAMSUNG DRYER
Model DVE50BG8300VA3
Near Pueblo, CO 81001
Brandon
Job Details: 02/20/2025
"Bad tco, replaced heater assy, tested operation hass oqc passed"
We serviced a
SAMSUNG WASHER
Model WA52A5500AV/US
Near Colorado Springs, CO 80921
Mathew
Job Details: 02/20/2025
Found 9c8 error displayed. Replace control. Test op all okay.
We serviced a
SAMSUNG WASHER
Model WF45B6300AP/US
Near Colorado Springs, CO 80916
Mathew
Job Details: 02/20/2025
"Found pump receiving correct voltage, pump not operating. Remove pump, found impeller broken. Replace pump. Rest op on OQC. All okay."
We serviced a
COVE DISHWASHER
Model DW2450
Near Colorado Springs, CO 80919
Charles
Job Details: 02/20/2025
"3 of 4 mounting brackets broke off frame of dishwasher and can not secure to cabinets or granite countertops, unit not repairable per tech line."
We serviced a
WOLF RANGE
Model DF60650CG/S/P
Near Colorado Springs, CO 80904
Ralph
Job Details: 02/20/2025
installed part and unit checked
We serviced a
SUBZERO ICE MACHINE
Model 5311061
Near Colorado Springs, CO 80904
Ralph
Job Details: 02/20/2025
"installed parts and unit checked okay, cust top monitor"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRS325SDHW08
Near Santa Fe, NM 87507
Antonio
Job Details: 02/20/2025
cx complaint - right side light switch broken - replaced light switch - unit is working properly - survey mentioned - cx cannot find receipt or paperwork when unit was purased
We serviced a
MAYTAG WASHER
Model MVWB765FW3
Near Albuquerque, NM 87107
Larry
Job Details: 02/20/2025
CX complaint - F3E2 error - Inspected unit and found pressure system fault - Replaced control with pre-id part and tested good - Unit is good to go - Survey mentioned
We serviced a
THERMADOR COFFEE MACHINE
Model CTES1UCB/04
Near Colorado Springs, CO 80921
Charles
Job Details: 02/20/2025
"Calc light flashing, unit needs to be descaled. Ran descaling cycle. Service fee $159.95 Labor $229.95 MPS $14.50 Total $404.40 paid autho C9NKAE"
We serviced a
MAYTAG DRYER
Model MED6630HW2
Near Santa Fe, NM 87507
Jason
Job Details: 02/20/2025
Installed parts ran timed dry cycle unit opperation checks ok. spoke to cx about review
We serviced a
KITCHENAID DISHWASHER
Model KDFE204KBL3
Near Santa Fe, NM 87507
Jason
Job Details: 02/20/2025
Checked unit adjusted dyr cycle per service pointer. ran unit opperation checks ok. spoke to cx about review
We serviced a
WHIRLPOOL RANGE
Model WFG320M0MS0
Near Santa Fe, NM 87507
Antonio
Job Details: 02/20/2025
cx complaint - oven door not aligned - replaced hinge door is aligned properly - survey mentioned - unit is working properly
We serviced a
WHIRLPOOL WASHER
Model WTW5015LW1
Near Albuquerque, NM 87120
Larry
Job Details: 02/20/2025
CX complaint - Washer not starting - Inspected unit and found the wires to the drain pump loose - Secired harness and tested good - Unit is good to go = Survey mentioned
We serviced a
MAYTAG WASHER
Model MVW7230HC1
Near Rio Rancho, NM 87124
Larry
Job Details: 02/20/2025
CX complaint - Spin cycle will stop mid wash cycle will not complete - Inspected unit and found the slider failed - Replaced with pre-id parts and tested good - Unit is good to go - Survey mentioned
We serviced a
JENN-AIR RANGE
Model JDS1450ML0
Near Santa Fe, NM 87506
Antonio
Job Details: 02/20/2025
cx complaint - left front burner not igniting - replaced parts - unit is working properly - survey mentioned
We serviced a
MAYTAG WASHER
Model MHW6630HW1
Near Santa Fe, NM 87508
Jason
Job Details: 02/20/2025
Installed top before and after pics uploaded unit checks ok. spoke to cx about review
We serviced a
MAYTAG DRYER
Model MGD8630HW1
Near Santa Fe, NM 87508
Jason
Job Details: 02/20/2025
Installed top uloaded before and after pics unit checks ok. spoke to cx about review