We serviced a
MAYTAG WASHER
Model MVWX655DW1
Near Colorado Springs, CO 80919
Eric
Job Details: 05/07/2024
"Customer states that washer not spinning out properly, checked via diagnostics as well as physically that the spluch is failing. Recommend replacing that as well as belt. Clutch W10721967 $76.43Belt W11239857 $81.88Tax$12.98Supplies$14.50HC$149.95Labor$179.95Total$515.69Balance$365.74Collected HC 149.9530 day estimate No return on parts $149.95 CC Auth# R94MEC"
We serviced a
SAMSUNG REFRIGERATOR
Model RF28HMEDBSR/AA 12
Near Pueblo, CO 81005
Domingo
Job Details: 05/07/2024
Silicone box defrost ice maker reset it it turn and water drop down its working Sc 129.95 customer pay 129.95 with check
We serviced a
BOSCH DISHWASHER
Model SHX84AAF5N/28
Near Pueblo, CO 81004
James
Job Details: 05/07/2024
Installed ordered float hood to replace broken one. Tested ops all ckok. Left litmus
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5201SR/AA
Near Colorado Springs, CO 80910
Mathew
Job Details: 05/07/2024
"Called techline to document persistent ice maker issue. Unit will be deemed unrepairable once we get a new 417 ticket number, per tech line agent. Advised Cx to create a new ticket."
We serviced a
PROFILE WASHER
Model PFQ97HSPV0DS
Near Pueblo, CO 81005
James
Job Details: 05/07/2024
Called ge tech support and talked to Jay. Ran through all test all ops test good. Did find drain hose too far in stand pipe causing excess moisture in tub causing poor drying. Zip tied drain hose to pipe 4' in stand pipe all ops test good let litmus
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ08
Near Albuquerque, NM 87121
Larry
Job Details: 05/07/2024
CX complaint - Ice not dispensing - Inspected unit and found the auger failed damaging the ice bin - Replaced with pre-id parts and tested good - unit is good to go
We serviced a
MAYTAG WASHER
Model MVWB865GC0
Near Albuquerque, NM 87121
Larry
Job Details: 05/07/2024
Model and serial tag is worn and unreadable - informed CX that we cannot repair under contract because of this
We serviced a
WHIRLPOOL WASHER
Model WFW6605MC0
Near Albuquerque, NM 87121
Larry
Job Details: 05/07/2024
CX complaint - Not draining - Inspected unit and found the drain filter clogged with debris - Cleaned filter and tested good - Unit is good to go
We serviced a
WHIRLPOOL DISHWASHER
Model WDT730HAMZ0
Near Peyton, CO 80831
Aaron
Job Details: 05/07/2024
"Removed and replaced control and UI console, tested unit through diagnostics, working well now, no leaks, installed litmus strip and advised customer of survey."
We serviced a
MAYTAG WASHER
Model MHW6630HW3
Near Eagle, CO 81631
Antonio
Job Details: 05/07/2024
Installed bellow unit tested good
We serviced a
MAYTAG WASHER
Model MVW7232HC2
Near Rio Rancho, NM 87144
Joe
Job Details: 05/07/2024
Cx complaint. Not filling enough. Inspected unit. No errors. Per tech support unit working as designed. Gave suggestions on how to get more water in basket. Sr# 7739046498
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF507HBS00
Near Colorado Springs, CO 80921
Eric
Job Details: 05/07/2024
"Replaced lights, unit working properly at this time."
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ0
Near Monument, CO 80132
Eric
Job Details: 05/07/2024
"Customer complaint that dishwasher slow drain and error code. Checked and cleared drain line, tested unit. Unit went through full cycle no errors. Conducted customer education on filter cleaning and maintenance, readjusted drain line for better flow. Informed customer on survey"
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC302ESS00
Near Colorado Springs, CO 80921
Eric
Job Details: 05/07/2024
Arrive and found right door gasket ripped removed and replaced. Inform customer survey and recommended that door be kept close so that gasket can form a proper seal.
We serviced a
WHIRLPOOL DISHWASHER
Model WDT750SAKZ1
Near Pueblo, CO 81001
Domingo
Job Details: 05/07/2024
Check heat elements and they test it good check drain is draining good the limit test it good customer has forgot using rinse aid it wont heat well if rinse aid is not use customer needs to put rinse aid and it will dry
We serviced a
WOLF COOKTOP
Model CG365C/S
Near Monument, CO 80132
Jerimiah
Job Details: 05/07/2024
"Unit is having metal seizing together. Such as burner mounting screws to holders. If further work needs to be done MUST be cautious and not tighten down screws, and back them off slightly. Installed replacement parts. Unit check ok.803177 simmer tubing"
We serviced a
WHIRLPOOL DISHWASHER
Model WDF331PAHS1
Near Peyton, CO 80831
Aaron
Job Details: 05/07/2024
"Water inlet valve not allowing water into unit, removed and replaced valve, water incoming now, recommend new valve under sink for consistent pressure. Advised customer of situation and survey."
We serviced a
GE REFRIGERATOR
Model GNE29GSKGSS
Near Colorado Springs, CO 80903
David
Job Details: 05/07/2024
"Replaced control board, temps on ui seem to be more accurate. Watched for a little bit."
We serviced a
GE WASHER
Model PFQ97HSPV0DS
Near New Castle, CO 81647
Erik
Job Details: 05/07/2024
perform test/ connect smartHQ service:test 15 compressor test: result - PASSspin test: PASScall GE TAG: confrim test results live with tech support - OOB error is only present codeTAG suggest to rebalance loads to prevent dry performance call GE 1-800-386-1215
We serviced a
WHIRLPOOL WASHER
Model WTW5000DW3
Near Peyton, CO 80831
Aaron
Job Details: 05/07/2024
"F8E1 Long fill, F7E6 motor drive error codes upon arrival, found built up debris in cold water inlet valve, customer states they use a well, cleared debris and leveled unit, tested unit , working well now. Advised customer of 5 star survey."
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKZ2
Near Colorado Springs, CO 80924
Aaron
Job Details: 05/07/2024
"F8E4 error code upon arrival, tested unit through quick wash and diagnostic cycles without dishes or soap, unit is working well at time of inspection, no leaks, water levels are good and drain pump is working well. Customer to monitor. Discussed with techline SR7739046548"
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017AS4
Near Colorado Springs, CO 80908
Aaron
Job Details: 05/07/2024
"Sparks in cavity of unit by turntable motor, coupler melted, unit still heats, but sparks each 3-5 seconds. Discussed situation with safety, declined repair to the unit. Customer to contact whirlpool for further questions. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL DRYER ELECTRIC
Model WED5100HW1I
Near Colorado Springs, CO 80927
Aaron
Job Details: 05/07/2024
"Heating element shorted out, thermostats check out okay, approved onsite, removed and replaced element, tested unit, working and heating well now. Heating element wp3387747 $100.62Tax $8.25Supplies $14.50Hc $129.95Labor $179.95Total job $433.27No return on parts Auth total job $443.27 ck6097 #43NA94"
We serviced a
WHIRLPOOL DRYER
Model WGD5620HW3
Near Florissant, CO 80816
David
Job Details: 05/07/2024
"Replaced inlet thermistor, and front sensor housing. Ran diagnostics, cleared code F3E3 inlet thermistor problem. Ran diagnostics cycle all ran good."
We serviced a
MAYTAG DISHWASHER
Model MDB4949SKB2
Near Colorado Springs, CO 80922
Aaron
Job Details: 05/07/2024
"Removed and replaced control once more, tested unit through diagnostics, working well in diagnostics, no leaks, installed litmus strip, and advised customer of survey."
We serviced a
GE REFRIGERATOR
Model GSHF5KGEGCWW
Near Colorado Springs, CO 80923
Roman
Job Details: 05/07/2024
Fridge temps are good and fans are all running. Ice maker was shut off. Turned it on and the ice maker started working. Checked for leaks and there is no leaking. Showed cx what to clean to keep the fridge running efficiently. Lowered fridge and freezer temps. Paid sc $129.95 CK Auth# YR3MTV
We serviced a
SAMSUNG MICROWAVE
Model ME21R7051SS/AA
Near Colorado Springs, CO 80911
Mathew
Job Details: 05/07/2024
"Pulled microwave from mount. Replaced faulty wire harness, door. Test op, se error is gone. Unit working as expected."
We serviced a
WHIRLPOOL DRYER
Model WED8127LC22
Near Rio Rancho, NM 87144
Joe
Job Details: 05/07/2024
Cx complaint. Dryer keeps shutting off. Replaced control ordered last visit. Tested unit. Unit good to go
We serviced a
WHIRLPOOL COOKTOP GAS
Model WCG55US6HS05
Near Albuquerque, NM 87120
Larry
Job Details: 05/07/2024
Installed burner and ignitor and tested good - Unit is good to go - CX is not quite happy with the performance - One burner takes a little longer than the rest to light but does light - Unit is operating as designed
We serviced a
WHIRLPOOL WASHER
Model WTW7500GC2
Near Colorado Springs, CO 80902
Carlos
Job Details: 05/07/2024
"Installed lid, hinges, and door latch"
We serviced a
DACOR RANGE
Model RV46S
Near Colorado Springs, CO 80904
Ralph
Job Details: 05/07/2024
instlled part and unit checked okay
We serviced a
JENN-AIR RANGE
Model JDRP436HL01
Near Colorado Springs, CO 80906
Ralph
Job Details: 05/07/2024
installed parts aqnd unit checked okay cust approved
We serviced a
KITCHENAID REFRIGERATOR
Model KRFF507HPS03
Near Colorado Springs, CO 80911
Carlos
Job Details: 05/07/2024
"Pressurized system with nitrogen 100 psi held pressure ok for 30 minutes, purged system. Filled back up with R600a to 0 psi cx will observe"
We serviced a
WHIRLPOOL DISHWASHER
Model WDF520PADM9
Near Colorado Springs, CO 80922
Aaron
Job Details: 05/07/2024
"Circulation motor is shorted out, removed and replaced motor sump assembly, tested unit through diagnostics, working well now, no leaks, installed litmus strip and advised customer of survey."
We serviced a
MAYTAG WASHER
Model MVW6230HW2
Near Albuquerque, NM 87114
Joe
Job Details: 05/07/2024
"Cx complaint. Not completing cycle. Replaced motor, cam, actuator and control ordered last visit. Tested unit unit good to go"
We serviced a
JENN-AIR REFRIGERATOR
Model JF36NXFXDE01
Near Colorado Springs, CO 80906
Ralph
Job Details: 05/07/2024
"after 2 evap covers come in, the custt decides the scratch isnt that big of an issue, completed the call"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF757SDHZ04
Near Albuquerque, NM 87120
Larry
Job Details: 05/07/2024
Installed parts listed and tested good - Unit is good to go
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRB533CZJZ00
Near Santa Fe, NM 87506
Jason
Job Details: 05/07/2024
Installed compressor unit starting to cool and pressures within range unit checks ok
We serviced a
SUB ZERO GAS RANGE
Model CG365P/S
Near Colorado Springs, CO 80904
Ralph
Job Details: 05/07/2024
replaced parts and unit checked okay
We serviced a
AMANA REFRIGERATOR
Model DRS2663BW
Near Rifle, CO 81650
James R
Job Details: 05/07/2024
Signed disclaimer. Evac system. Replaced drier and compressor. Had to rewire overload relay for new one to fit. Also had to adapt several of the copper line to fit to compressor. Evac again. Recharged system 135 psi hi and 4lbs low side unit is cooling. Cleaned condenser. Unit is operating as should. Please fill out whirlpool tech satisfaction survey. Thank You.
We serviced a
WHIRLPOOL WASHER
Model WFW5605MW0
Near Rifle, CO 81650
James R
Job Details: 05/07/2024
Signed disclaimer. F9E1 long drain cleared error code. Removed dryer off top and then front of washer. Then Vac out water thern checked pump screen completely plugged with trash. Cleaned and then reassembled uni.t Test run in diagnostics no error coded when done. Unit operating as should. Customer paid $149.95 auth code T3NEV9 Please fill out whirlpool tech satisfaction survey. Thank You. F0E2 oversudsF5E4 door not openedF5E2 lock failure
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF757SDHZ04
Near Albuquerque, NM 87120
Larry
Job Details: 05/07/2024
CX complaint - popping or cracking noise - Inspected unit and found the damper motor is very loud - Replaced with pre-id parts and tested god - Unit is good to go
We serviced a
GAGGENAU WARMING DRAWER
Model WS461710
Near Colorado Springs, CO 80919
Ralph
Job Details: 05/07/2024
"tech support is going to submit this call to the upper management for replacement or what next steps to follow, case number 4104268209"
We serviced a
SPEEDQUEEN DRYER
Model ADEE9RYS177TW01
Near Colorado Springs, CO 80908
Roman
Job Details: 05/07/2024
"Took the dryer apart and ohmed out thermostats and heater and they all ohm out, spoke with tech support last time and told me to look for air getting out and dryer not pushing air. Nothing they suggest is pertaining to this dryer. I installed new heater and thermostat. Tested the unit and its heating and working great."
We serviced a
MAYTAG REFRIGERATOR
Model RSW2700DAE
Near Colorado Springs, CO 80909
Carlos
Job Details: 05/07/2024
Needs an evap fan part is no longer available (648561).
We serviced a
WHIRLPOOL M/W OTR
Model WMH31017HS09
Near Colorado Springs, CO 80922
Jerimiah
Job Details: 05/07/2024
"Unit had arcing and sparking at top back of unit cavity, found debris where energy was bouncing off causing carbon buildup. Was able to clean buildup and debris off. Unit check ok. Called safety and received SR#7739030672"
We serviced a
WHIRLPOOL M/W OTR
Model WMH53521HZ06
Near Colorado Springs, CO 80908
Jerimiah
Job Details: 05/07/2024
"OTR bulb burned out and controller controller was not sending power to bulb, replaced both, unit check ok, disclosed survey to cust fcc 5star."
We serviced a
THERMADOR REFRIGERATOR
Model T36FT820NS/02
Near Aspen, CO 81611
Erik
Job Details: 05/07/2024
"customer not available for signature.replace MCB,verify operation.all good job complete."
We serviced a
BOSCH GAS COOKTOP
Model SGSXP365TS/01
Near Snowmass Village, CO 81615
Erik
Job Details: 05/07/2024
"customer not available for signature.replace valve and potetiometer, verify operation. all good job complete"
We serviced a
GENERAL ELECTRIC ICE MACHINE
Model UCC15NPRBII
Near Aspen, CO 81611
Erik
Job Details: 05/07/2024
customer sighned disclaimer .replace UI and MCB..verify operation'all good job complete.
We serviced a
KITCHENAID RANGE
Model KSGG700ESS6
Near Aspen, CO 81611
James R
Job Details: 05/07/2024
"Customer signed disclaimer. Replaced MCB,Sensor and insert. Finished assembling unit. Start unit and test operation in convection bake.Heated up to 350 When reached let unit set for a few minutes bake burner came on once that finished. Canceled operation then reset convection bake to 350 degrees started unit and within a bit unit indicated it is at operating temperature. Unit is working as should. Please fill out whirlpool tech satisfaction survey. Thank You."
We serviced a
SAMSUNG REFRIGERATOR
Model RF263TEAESG/AA
Near Colorado Springs, CO 80920
Brandon
Job Details: 05/07/2024
"No errors, major ice build up, removed ice and replaced ice maker kit and tray, tested op all checks ok"
We serviced a
SAMSUNG REFRIGERATOR
Model RF28T5001SR/AA
Near Colorado Springs, CO 80919
Brandon
Job Details: 05/07/2024
"Replaced EVAP cover assy and tested op via hass maunel control all checks ok, temps are coming down"
We serviced a
SAMSUNG WASHER
Model WF410ANRXAA01
Near Colorado Springs, CO 80923
Brandon
Job Details: 05/07/2024
"Removed pump and checked for debris found no obstructions, pump is seized and needs replaced, Svf paid $129.95 Auth# RT3YNM, Dc96-01700a $244.54, Labor $199.95, Svf $129.95, Mps $14.50, Tax $20.05"
We serviced a
SAMSUNG REFRIGERATOR
Model RF28R7201SR/AA 01
Near Colorado Springs, CO 80951
Brandon
Job Details: 05/07/2024
"Replaced ice maker and ice route, tested op all checks ok, hass oqc passed, Labor paid $199.95 Auth# KWK4R3"
We serviced a
JENN-AIR REFRIGERATOR
Model JFX2897DRP02
Near Colorado Springs, CO 80920
Eric
Job Details: 05/07/2024
"Customer complaint unit not cooling, upon arrival refrigerator was on and not was working, put unit into diagnostic mode and found the following items have failed main control board Delhi UI. Recommended to homeowners that we change out these items. Parts:Control $149.12 WPW10736627 Control board $307.79 W10843055Tax$37.47Supplies$14.50HC $169.95Labor$279.95Total$958.78Collected HC balance $788.8330 day estimate No return on partsAuth $169.95 V939WA"
We serviced a
WHIRLPOOL REFRIGERATOR
Model ED5FHAXVY03
Near Pueblo, CO 81008
Domingo
Job Details: 05/06/2024
Customer wasnt home I knock for 15 min and call and nothing
We serviced a
GE REFRIGERATOR
Model ZISS420DRJSS
Near Colorado Springs, CO 80906
Roman
Job Details: 05/06/2024
Fridge compressor is running and condenser fan. Evap fan is not running. Recommend replacing the Evap fan motor. Installed new fan motor and put the unit back together. Made sure fans and compressor kicked on. Fridge is working great. Evap fan #WR60X10185 $155.07Tax $12.71Parts total $167.75Labor $249.95Sc $149.95Total cost $567.65Paid total cost $567.65 CC Auth# 4N4MLL
We serviced a
WHIRLPOOL WALLOVEN
Model KOCE500ESS
Near Edgewood, NM 87015
Jason
Job Details: 05/06/2024
installed lamp unit checks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model ED5FHAXVY03
Near Pueblo, CO 81008
Domingo
Job Details: 05/06/2024
Customer wasnt home I knock for 15 min and call and nothing
We serviced a
SAMSUNG DRYER
Model DVE50BG8300VA3
Near Colorado Springs, CO 80917
Brandon
Job Details: 05/06/2024
"Drum rubbing shell, adjusted drum and tested op all checks ok hass oqc passed"
We serviced a
WHIRLPOOL WASHER
Model WFW9640XW00
Near Colorado Springs, CO 80915
Mathew
Job Details: 05/06/2024
"Found f20 code on machine, unplugged machine, ran test cycle, f20 came back at end of cycle. Checked all components of water valve, drain. All check out ok. Recommend control. Cx not moving forward."
We serviced a
SAMSUNG DRYER
Model DVE45B6300P/A3
Near Colorado Springs, CO 80925
Mathew
Job Details: 05/06/2024
"Found belt fell off faulty idler pulley, idler pulley seized. Replaced motor assy and belt. Test op all okay."
We serviced a
SAMSUNG DISHWASHER
Model DW80R2031US
Near Colorado Springs, CO 80925
Mathew
Job Details: 05/06/2024
"Found cabinet underneath sink wet, water filter wet where it touches bottom. Removed dishwasher, floor underneath is dry. Checked drain connection, dry. Dishwasher is working as expected, no leaks detected due to dishwasher."
We serviced a
WHIRLPOOL M/W OTR
Model WMH32519HW06
Near Pueblo, CO 81004
Domingo
Job Details: 05/06/2024
I replace board and interface everything work fine
We serviced a
AMANA RANGE
Model AER6303MFB5
Near Albuquerque, NM 87121
Larry
Job Details: 05/06/2024
Installed cooktop and tested good - Unit is good to go
We serviced a
SAMSUNG REFRIGERATOR
Model RF263BEAEWW/AA 07 RF
Near Colorado Springs, CO 80911
Mathew
Job Details: 05/06/2024
"Found iceroom frozen over. Defrosted room, checked seals. All okay. Installed icemaker repair kit, test op all okay."
We serviced a
KITCHENAID WALLOVEN
Model KOCE500ESS22
Near Falcon, CO 80831
Aaron
Job Details: 05/06/2024
"Replaced switch assembly and bulb, tested unit, working well, verified by customer. Advised customer of 5 star survey."
We serviced a
SAMSUNG REFRIGERATOR
Model RF27T5201SG/AA 00 RF
Near Colorado Springs, CO 80922
Brandon
Job Details: 05/06/2024
"Replaced ice maker, tray, auger and ice route and tested op all checks ok hass oqc passed"
We serviced a
SAMSUNG REFRIGERATOR
Model RF23R6201DT/AA
Near Colorado Springs, CO 80906
Mathew
Job Details: 05/06/2024
"Replaced faulty icemaker, test op all okay. Collect labor $179.95. Paid by check."
We serviced a
MAYTAG WASHER
Model MVW7232HW1
Near Albuquerque, NM 87114
Larry
Job Details: 05/06/2024
"CX complaint - Washer senses, doesn't cycle - Inspected unit and found F7E4 and the slider failed - Replaced with TS and tested good - Unit is good to go; used 1 W10734521 (Slider) from stock"
We serviced a
KITCHENAID WALLOVEN
Model KOCE500ESS22
Near Colorado Springs, CO 80920
Eric
Job Details: 05/06/2024
"Customer complained that oven was not heating properly as well as microwave not heating enough. Put wall oven into diagnostic mode and found that programming was incorrect, adjusted accordingly and tested all components. Double checked microwave, heating properly at this time. Conducted some customer education of product. Customer to monitor if problem reoccurs recommend replacing control board. Informed customer of survey."
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC704FPS06
Near Albuquerque, NM 87107
Larry
Job Details: 05/06/2024
Installed UI and tested good - Unit is good to go
We serviced a
KITCHENAID DISHWASHER
Model KDFE104HPS0
Near Colorado Springs, CO 80917
Eric
Job Details: 05/06/2024
Replaced failed components and tested. Unit running properly at this time. Installed litmus stripe and informed customer of survey.
We serviced a
SAMSUNG WASHER
Model WF45B6300AC/US
Near Colorado Springs, CO 80927
Brandon
Job Details: 05/06/2024
Replaced sub PBA and tested op all checks ok hass oqc passed
We serviced a
KITCHENAID REFRIGERATOR
Model KRFC704FPS06
Near Albuquerque, NM 87107
Larry
Job Details: 05/06/2024
Installed UI and tested good - Unit is good to go
We serviced a
AMANA WASHER
Model NTW4519JW2
Near Albuquerque, NM 87107
Larry
Job Details: 05/06/2024
CX compliant - Washer not filling all the way with water - CX INSTRUCT - Explained to cx that the unit fills by weight of the load being washed - Ren DIag and calibration cycles and unit is operating as designed
We serviced a
WHIRLPOOL DRYER ELECTRIC
Model WED8740DW1
Near Colorado Springs, CO 80917
David
Job Details: 05/06/2024
"Installed cx supplied parts, tested and is heating as expected. Cx is going to have vent professionaly cleaned."
We serviced a
SPEEDQUEEN DRYER
Model ADE4BRGS175TW01
Near Colorado Springs, CO 80918
David
Job Details: 05/06/2024
"Replaced heater assembly, tested and running as expected."
We serviced a
WHIRLPOOL DRYER
Model WED5100HW1
Near Colorado Springs, CO 80918
David
Job Details: 05/06/2024
"Checked dryer, did not find any burned wiring inside the dryer. No shorts in the wiring harness. The cord going into the outlet is badly burned. Called safety SR# 7738988843.Cx is called an electrician."
We serviced a
GE WASHER
Model GTW540ASP4WS
Near Minturn, CO 81645
Antonio
Job Details: 05/06/2024
Installed lid lock unit tested good
We serviced a
KITCHENAID WALLOVEN
Model KOCE500ESS22
Near Colorado Springs, CO 80908
Aaron
Job Details: 05/06/2024
"Door switches are not properly working, removed and replaced switch harness assembly, tested unit and working well now. Advised customer of 5 star survey."
We serviced a
WHIRLPOOL RANGE
Model WFC150M0JW3
Near Fountain, CO 80817
Carlos
Job Details: 05/06/2024
"Installed burner, harness, board and sensor"
We serviced a
SAMSUNG DRYER
Model DVE53BB8700VA3
Near Peyton, CO 80831
Brandon
Job Details: 05/06/2024
"Bad high limit thermostat, replace heater assembly and op all checks ok hass oqc passed"
We serviced a
MAYTAG WASHER
Model MVW6200KW3
Near Colorado Springs, CO 80918
David
Job Details: 05/06/2024
"Checked washer, plug on to pump was not fully seated. Removed and reseated plug.Tested and is operating as expected."
We serviced a
AMANA WASHER
Model NFW5800HW2
Near Minturn, CO 81645
Antonio
Job Details: 05/06/2024
Unit has sudsing code Sc $149.95 $149.95 CK Auth# M93L3K
We serviced a
WHIRLPOOL RANGE
Model WFG550S0LZ4
Near Colorado Springs, CO 80924
Aaron
Job Details: 05/06/2024
"Customer states their oven is not lighting and causing a gas smell, found burner tube grounding screw loose, corrected and tested, lighting well, preheated to unit 350f and lit well each time after, top burners are working well and as designed. Customer not present for signature or to advise of survey. Discussed situation with safety."
We serviced a
SAMSUNG DRYER ELECTRIC
Model DV48J7700EW/A2I
Near Colorado Springs, CO 80915
Mathew
Job Details: 05/06/2024
"Found unit making grinding noise. Cleared obstruction in idler pulley, found two seized support rollers. Removed and cleaned both rollers, test op. Sounds better, if issue persists unit will need two rollers and idler pulley. $129.95 CC Auth# 3NH3H3Svf 129.95DC97-16782A x 2 rollers $172.76DC96-00882C idler $97.56Tax $22.17Labor 179.95"
We serviced a
MAYTAG WASHER
Model MVW7232HW1
Near Colorado Springs, CO 80911
Carlos
Job Details: 05/06/2024
Installed strike and latch runs all ok
We serviced a
WHIRLPOOL RANGE
Model WEG515S0LZ1
Near Grand Junction, CO 81501
James R
Job Details: 05/06/2024
customer sighned cisclaimer.install new electrode . vertify poperation of all burners.all good job complete.please fill out whirlpool tech sattisfaction survey.Thank You.
We serviced a
WHIRLPOOL WASHER
Model WTW4816FW3
Near Colorado Springs, CO 80911
Carlos
Job Details: 05/06/2024
Installed agitator runs ok
We serviced a
MAYTAG WASHER
Model MVW5430MW1
Near Colorado Springs, CO 80906
Carlos
Job Details: 05/06/2024
"Installed inner tub and suspension. Ran test, runs ok"
We serviced a
MAYTAG DRYER
Model MED4500MW0
Near Colorado Springs, CO 80906
Carlos
Job Details: 05/06/2024
"Installed timer runs ok. Advised cx to replace hose with semi rigid or solid metal hose, poor ventilation"
We serviced a
KITCHENAID COOKTOP
Model KCGS350ESS00
Near Grand Junction, CO 81507
James R
Job Details: 05/06/2024
"customer sighned disclaimer.replace valve on center burner,verify adjustments on all valves.all good job complete.pleassefill out whirlpool tech satisfaction survey.Thank You."
We serviced a
KITCHENAID DISHWASHER
Model KUDSO11JBS1
Near Colorado Springs, CO 80906
Carlos
Job Details: 05/06/2024
Installed links all ok. Cx paid LB $149.95 CK Auth# F93URC
We serviced a
SAMSUNG WASHER FRONT LOA
Model WF45M55OOAZ/A5I
Near Colorado Springs, CO 80918
Brandon
Job Details: 05/06/2024
"Replaced diaphragm and tested op, calibrated, all checks ok, Labor paid $199.95 Auth# 334L9N"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRX735SDHZ10
Near Albuquerque, NM 87110
Jason
Job Details: 05/06/2024
found there was no lubrication on rails lubricated rails unit checks ok
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRF535SWHZ10
Near Grand Junction, CO 81507
James R
Job Details: 05/06/2024
customer sighned disclaimer.replace faulty mull post.level out unit.all good job complete.please fill out whirlpool tech satisfaction survey.Thank You.
We serviced a
KITCHENAID COMPACTOR
Model KTTS505ESS2
Near Fruita, CO 81521
James R
Job Details: 05/06/2024
"customer sighned disclaimer.replace broken door realese .all good, job complete.pleasse fill out whirlpool tech satusfaction survey.Thank You"
We serviced a
MAYTAG WASHER
Model MVW7232HC2
Near Belen, NM 87002
Larry
Job Details: 05/06/2024
CX complaint - F2E2 error - Arrived and called techline (SR7739029292) - Ran multiple tests and could not duplicate issue - Suspect 'fantom error' from previous repair - Unit is operating as designed